P
Printablesepnasis
Bambu Lab X1C glass top LED raiser for BLLEDController
I adjusted @DutchDeveloper design to include cut out for handle screws.
- Pobrania
- 730
- Polubienia
- 90
- Ocena
- 4,9
Wyniki wyszukiwania: edco
Liczymy pasujące modele…
P
Printablesnetwalk
Heizkörperverstärker mit Magnethalterung, Radiator Fan, Alternative zu SpeedComfort
Update vom 12.04.2023: Neue, kürzere Endkappen für DC-Hohlstecker-Einbaubuchsen, 90° versetzt ( https://www.amazon.de/gp/product/B093FTFZ8Q/ ) für alle Versionen Update vom 13.03.2023: Neue Endkappen für DC-Hohlstecker-Einbaubuchsen (…
- Pobrania
- 526
- Polubienia
- 105
- Ocena
- 5
P
PrintablesKophi
Gas Can Vent Cap Wedco 84003
This is a direct replacement for the Wedco 84003 gas can vent cap. The thread pitch is 3mm and the other diameter of the male threads is approx 22mm. The plain cap should be printed with it's top touching the build surface and no…
- Pobrania
- 387
- Polubienia
- 20
- Ocena
- 5
P
PrintablesJessMarie
SV06 heat bed cable support for @ScatteredCollectable 5015 ducted fan
I love the 5015 fan duct from @ScatteredCollectable . I also love the Sovol SV06 Heat Bed Cable Support from @bulbasaur0 because (unless I'm missing something) it installs hella easier using zip ties instead of bolting to the heat bed…
- Pobrania
- 178
- Polubienia
- 20
- Ocena
- 5
P
Printablesvr6syncro
Bambulab Esp32 LEDController
Bambulab Esp32 LEDController See your Printer Status anywhere if there is Wlan and a 5V Powersource! Also there is a Webpage where you can see the Printerstatus and also control it! NEW! Added OBS overlay Website to Display the Printer…
- Pobrania
- 175
- Polubienia
- 135
- Ocena
- 5
P
PrintablesBrooklyn Tony
X-Shot Longshot Magwell Hardstop Strengthener for RedCowl's Magwells
MAGWELLS FOUND HERE: https://www.printables.com/model/512021-xshot-longshot-half-dart-magwells I apparently LARPed too hard when reloading my Lonxshot with RedCowl's more flush magwell installed, and managed to shear off both hard-stops…
- Pobrania
- 175
- Polubienia
- 30
- Ocena
- 5
P
PrintablesRedCowl
RedCowl Collet Dev Kit
Here is a Dev Kit for the collet I have used on SO many blaster frontends. I have made the license such that it allows for remixes and whatnot. I would LOVE to see this on blasters going forward, I just don't want people selling JUST the…
- Pobrania
- 155
- Polubienia
- 34
- Ocena
- 0
P
Printablesfloppa_in_flipflops
REDCON omega capital destroyer
this one is printed in 50% of an actual size, if ladders broke off, i included two ladder models to replace them
- Pobrania
- 108
- Polubienia
- 5
- Ocena
- 0
P
Printablesfloppa_in_flipflops
REDCON alastor siege cannon
"alastor" siege cannon from game "REDCON" ,you can find soldier and "basilisk" cannon in my profile
- Pobrania
- 107
- Polubienia
- 10
- Ocena
- 5
P
Printablesfloppa_in_flipflops
REDCON soldier
soldier from the game "REDCON" for my basilisk cannon : https://www.printables.com/model/253248-redcon-basilisk-cannon
- Pobrania
- 95
- Polubienia
- 7
- Ocena
- 5
P
PrintablesWireX
Wedco Gas Can Vent Cap with strap extension
Just added a spot for my factory "don't lose it" strap to the wedco gas can vent cap
- Pobrania
- 88
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLukaszemko
FreedConn tcom helmet handle
I made 2 version of intercom handle In the future I plan to add also version with clips (it was included with genuine intercom). You can print it with use of pet-g to make it more flexible or even tpu. Supports are needed //edit there are…
- Pobrania
- 87
- Polubienia
- 2
- Ocena
- 0
P
PrintablesH3dSprint
Holder suitable for a SpeedCoach
Print instruction: material: PETG or ASA supports: partial required layer height: 0,25mm or 0,32mm nozzle diameter: 0,4mm or 0,6mm brim: not required enclosure: not required
- Pobrania
- 80
- Polubienia
- 4
- Ocena
- 0
P
Printablesfloppa_in_flipflops
REDCON typhon heavy cannon
the model you see here printed on 50% scale check my profile to see more REDCON designs
- Pobrania
- 76
- Polubienia
- 7
- Ocena
- 0
P
Printablesfloppa_in_flipflops
REDCON basilisk cannon
i love game called "REDCON" so i designed a cannon from that game, i plan on designing a soldier for it soon
- Pobrania
- 70
- Polubienia
- 11
- Ocena
- 5
P
PrintablesRainbowDK
Nanoleaf Lines for ledconnectors and led strips with a waterproof layer
These can also be used with led connectors if you don't want to solder. Wire the led strips up like normal Rub some acetone on the lines (not too much) Take off the piece of film under the strip and place it on the lines Glue the lines on…
- Pobrania
- 68
- Polubienia
- 17
- Ocena
- 0
P
PrintablesThemadmaker
RedCowl Picatinny stock addons
A bigger back part to make RedCowls stock feel better and a part to stiffen the transition a bit more.
- Pobrania
- 54
- Polubienia
- 14
- Ocena
- 5
P
Printableswerz 99
Lathe Bedcover
To protect the lathebed of my Emco Maximat Super 11 a made a cover mainly from old leather (idea by Stefan Gotteswinter ). It uses two existing holes in the headstock casting and mounts on the DRO X-cover on the other side. I cut the…
- Pobrania
- 50
- Polubienia
- 22
- Ocena
- 0
P
PrintablesPerry - LikeThePlatypus
RedCowl Low-Profile Barrel Collet + Collet Delete
The RedCowl Low-Profile Barrel Collet + Collet Delete is a remix of the ubiquitous RedCowl Collet System I originally made for the X-Shot Skins Pro Piston Pump AEB. Featuring a lower profile and custom knurling, these give a better grip…
- Pobrania
- 47
- Polubienia
- 8
- Ocena
- 0
P
Printablesfloppa_in_flipflops
REDCON hydra assault cannon
check my profile to see more REDCON designs, gonna post more soon
- Pobrania
- 45
- Polubienia
- 8
- Ocena
- 0
P
Printablesfloppa_in_flipflops
REDCON dropship/zeppelin
model you see here printed on 50% scale check my profile for more REDCON designs
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMedConcept UG (haftungsbeschränkt)
6-Axis-Robot_MedConceptUG
6-Axis Robot from MedConcept UG (haftungsbeschränkt)
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
Printablesfloppa_in_flipflops
REDCON tartarus Heavy Mortar
check my profile to see more REDCON designs, gonna post more soon
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDarnoc
EDCO like Trash Recycle Bin
Remix of trash rolling recycle bins with EDCO printed on sides.
- Pobrania
- 36
- Polubienia
- 9
- Ocena
- 0
P
PrintablesGio F
NK SpeedCoach to Phone Adapter
This gadget serves to mount a normal-size phone onto an NK SpeedCoach mount, while holding the phone securely in place. It does this through the use of an adjustable “clamp” held in place with two screws. This allows rowers and coxswains…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesThemadmaker
cheek rest for RedCowl Pic stock
cheek rest for the stock. A tpu version and an everything else version. mainly tested with the tpu version. need 2 12-14 m3 screw and same number of m3 nut
- Pobrania
- 33
- Polubienia
- 9
- Ocena
- 5
P
Printablesfloppa_in_flipflops
REDCON python/taipan missiles
you can check my profile for more redcon models (if you want "taipan" missiles you need to add tube/hose to the base)
- Pobrania
- 31
- Polubienia
- 6
- Ocena
- 0
P
PrintablesThorsten Lachmann
MK4 Nozzle Camera Mount Remix #HeatbedConnector_CollisionFix
Nozzle Camera Mount for Prusa MK4 Remix of @acuteioa's model: https://www.printables.com/model/662673-prusa-mk4-nozzle-camera-mount Fixed Extruder Heatbed Connector Collison while mesh bed leveling #MeshBedLevelingFailed Need Print Support!
- Pobrania
- 31
- Polubienia
- 9
- Ocena
- 5
P
PrintablesLightningEagle14
RedCowel Nexus Pro X Collet Remix- Happy Face and Cat Face
Nexus Pro X Barrel Collet Frontend by RedCowl | Download free STL model | Printables.com :) :3
- Pobrania
- 26
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDrGhast
Redcowl Kit Compatible AIT 40max Lightning Muzzle
These muzzles are modified for compatibility with this kit: https://www.printables.com/model/1691579-ait-lighting-stock-attachment-point-picatinny-moun They are press fit and should be easily pulled in and out of the blaster but should…
- Pobrania
- 26
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAngel
Pinty Manometrer Tool-Redcornoutdoors
This is the Redcornoutdoors Pinty manometer tool, this tool will make possible to service your gauge on your Pinty air rifle (Timber, Thumper, Striker and Buster) I used Petg-cf filament, 3 walls and 25% infill and this worked just fine…
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPerry - LikeThePlatypus
Dart Zone Repeater Pro RedCowl Collet
The Repeater Pro RedCowl Collet is a 3D-printed muzzle for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a two-piece hardware-free clamp using RedCowl's this mod part makes performance tuning easier with quick,…
- Pobrania
- 23
- Polubienia
- 11
- Ocena
- 0
P
PrintablesAugustus
Quick Deploy Button Lock Piece for RedCowl's folding stock
Print settings: Same as original. Print my remixed button lock piece if you want to be able to force-unfold the stock without pressing the button (still need to click the button to fold the stock!) Note: This requires a stronger button…
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSoggy _Auggy
Easy Remove Pins for Redcowl's X-shot Piston Pump MPP Collet Shroud System
Redcowl's MPP shroud pins, but with keyring slots to make them easier to remove! I highly recommend scaling them at 99% in the slicer for even easier removal.
- Pobrania
- 20
- Polubienia
- 14
- Ocena
- 0
P
Printablesmoondoctor
TEDCO Original Gyroscope Coaster
Inspiration of this coaster comes by the gyroscope my son was playing with recently that I also had growing up. The Tedco Original gyroscope. I used the wheel weight from the middle (I couldn't decide how to implement the frame parts).…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSoggy _Auggy
Detailed Redcowl's X-shot Piston Pump MPP Stubby Barrel Shroud
Just added some triangular holes to make it look cool. There is a “naughty” version that has “3==D” at the bottom. There is also a blank version that is SFW.
- Pobrania
- 18
- Polubienia
- 14
- Ocena
- 0
P
Printablesconquestcommando
WEDCO Gas Cap Replacement
This is for those old wedco gas cans that you may be missing a cap for and want to use an old school nozzle. Took the original design by https://www.thingiverse.com/Toleman and tweaked it a bit to add a hole and softened the threads.
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 5
P
PrintablesWoodys_wood
Redcowl Xshot MPP M-LOK front end
Lengthened stubby front end with mlok + upper rail. Uses M4 hardware for the upper rail.
- Pobrania
- 12
- Polubienia
- 8
- Ocena
- 0
P
PrintablesEdgar Rangel Moreno
Base Intercomunicador T-COM FreedCom
Se me rompió la pieza y para evitar comprar un intercomunicador nuevo, decidí crear la pieza e imprimirla. Se recomienda imprimir a 45° para dar mayor fuerza al enganche.
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBweegN
WEDCO 84002 fuel can sealing disc
My first model! Simple, yet effective. Hopefully, I did it right. After printing @conquestcomm_1807948 WEDCO fuel cap and vent cap (worked great!), I drafted up a disc to complement the set. This is the sealing disc that goes between the…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSelf Taught Stuff
UnlimitedCoders Fridge Magnet
This is a custom fridge magnet that I made for UnlimitedCoders. Printed on Anycubic Photon Mono printer. Magnet size is 20mm x 10mm x 3mm. You can find their official website here: https://unlimitedcoders.com Watch the video of the…
- Pobrania
- 11
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHedgehog sneezed
REDCON heat ray solaris
heat ray solaris from redcon game. Print with support and adhesion. Cut out the
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRaul Me Go
Jig for roundedcorners 10 and 20 mm
This piece is printed with PLA or ABS, with aleatory seam to give strenght. The first layer of .2 mm contains the letters and numbers.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDave
95mm (large) fidlock remix of RedCowls AIT 40max Lightning or Lilaps shroud
A remix of RedCowl's excellent shroud, that allows for using the 95mm fidlock fitting holsters (Holdster, and others). Setup for a right hand draw, to left hand draw, mirror the files. Updated with Left hand draw files as well. Go to…
- Pobrania
- 9
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRomek*Cyborg
Pedco Ultrapod Mini "Shoe"
I lost a “shoe” on my Pedco Ultrapod Mini tripod; I don't believe spare parts are available so I designed and printed this small element. Print in TPU to increase adherence to surface it is in contact with.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAugustus
X-Shot Hawkeye Folding Stock Adapter (RedCowl Remix)
Print orientation same as the original model. I recommend using standard/manual supports after support-painting the highlighted face (Paint-on supports tool in Bambu Studio or an equivalent). Print settings: Same as original. every other…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
Printablessolnus
SmartDrive SpeedControl Dial Extended Mount Rotation Limiter
Internal component for SmartDrive SpeedControl Dial extended mount that limits the rotation of the dial. First model is the same as the OEM part. The “90 degree” model has been modified to further limit the rotation of the dial mount to…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPercySly
CorrugatedConduitCover 1/2 iD 35mm, oD 41mm
This is v2 with added bewel to the center, print the center in 70% infill and drill cable holes into it. Secure with zipties if needed.
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPerry - LikeThePlatypus
RedCowl Trident "Sniper" Barrel Carrier
The Trident Little Sniper Barrel is an alternative carrier to RedCowl's Trident Silly Shell springer-pistol. Featuring an O-ring retaining metal barrel, this allows you to breech-load single short darts with higher FPS and better accuracy…
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
PrintablesH3dSprint
Holder suitable for a SpeedCoach - short version
Print instruction: material: PETG or ASA supports: partial required layer height: 0,25mm or 0,32mm nozzle diameter: 0,4mm or 0,6mm brim: not required enclosure: not required
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printablessc micro
Freedconn FG microphone in a motorcycle helmet (integral helmet)
Простая модель для крепления микрофона 6мм в закрытом шлеме. Отверстия овальная для извлечения (замены) микрофона в случаи поломки. Это моя первая модель, получилось криво, но функционал выполняет.
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printables
Redcowl Xshot MPP M-LOK front end
Lengthened stubby front end with mlok + upper rail. Uses M4 hardware for the upper rail.
P
Printables
Redcowl Kit Compatible AIT 40max Lightning Muzzle
These muzzles are modified for compatibility with this kit: https://www.printables.com/model/1691579-ait-lighting-stock-attachment-point-picatinny-moun They are press fit and should be easily pulled in and out of the blaster but should…
P
Printables
Lonx Shroud with RedCowl Collet
Used the female collet dev kit on the 2.1 lonx shroud. To make room for the collet geometry the shroud had to be extended to ~260mm. Since this is likely taller than most users printers, I have also added a split version that will fit on…
P
Printables
RedCowl-ish Picatinny Rail Segment
For modeling, make each rail completely flush to each other, you probably shouldn't have to edit anything. Update 1: fixed spacing
P
Printables
Redcodi Lego Brick
Customized version of https://www.thingiverse.com/thing:3867358 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3867358 Instructions Using the following options: brickLength = 4 brickWidth = 2 brickHeight…
P
Printables
Low Profile Collet for RedCowl Collet System
A low Profile Collet for use in the following models: https://www.printables.com/model/535988-xyl-km9-unicorn-barrel-collet-frontend-v2-updated https://www.printables.com/model/535844-xshot-longshot-barrel-collet-v2