Wyniki wyszukiwania: eights

Sortowanie

272 modeli

P
PrintablesAdam Drtina

3DSets_Beadlock ring_70g weights

So I made the beadlock rings for the 3DSets rancher wheels to prevent tires from slipping of the rim. In addition, you can add 70g weights to each of the ring to lower the center of gravity. To add the extra weight, I used these Pb…

Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu

Pobrania
50
Polubienia
13
Ocena
5
P
PrintablesGerryPB

Custom Weights

These are small containers I designed to create a range of custom weights. I needed a bobbin tension of 23g and also made plus or minus 5g weights as well. I used a scale that had a resolution of 0.1g and added metal scrap punches until I…

Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
8
Ocena
0
P
PrintablesMireCZek

Posilovací závaží se stojanem bez MMU. / Weights with stand without MMU

Zmenšená sada závodních olympijských kotoučů včetně stojanu. Reduced set of Olympic competition discs including stand. Vytvořeno z důvodu snadnějšího tisku bez MMU. Created for easier printing without an MMU. Kompatibilní se sadou činky a…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
8
Ocena
0
P
PrintablesPieter Koenen

MMU3 Spoolholder Stilts - 4 Heights provided.

MMU3 Spoolholder Stilts, four heights are provided: 10, 20, 30 and 40 mm. Created for the injection molded Spool holder - R4. Optional increased height in case a bend of the PTFE tube is too sharp. This can be the case for your setup if…

Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesMakerTom

Stackable Crate Honeycomb Design (Support free) 2 heights

I always wanted to design a nice looking stackable crate primarily for testing my 3D printer. This crate is designed to be printed without supports by relying on bridging capabilities of filament and printer. Best print settings are 0.2mm…

Pobrania
3601
Polubienia
936
Ocena
4,97
P
PrintablesMyStoopidStuff

Gridfinity 1xY Multi Compartment Lidded Bins with Tabs Version 2.1 in 3U, 6U and 9U heights

There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…

Pobrania
1693
Polubienia
772
Ocena
4,93
P
PrintablesRockChalkAZ

Gravitrax Compatible Spacer (various heights) No Support Needed

This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.

Pobrania
1367
Polubienia
119
Ocena
4,92

*Updated* Necklace and jewelry holder, various heights

****FINALLY UPDATED to address lame design flaws**** Added threaded couplers to attach the post and post extension together and the post or extension to the top. If the coupler is too big on your print, scale it down a little in x and y.…

Pobrania
1319
Polubienia
242
Ocena
4,9
P
PrintablesTamer

cement weights mould - Carp Fishing PETG/TPU

🆕 UPDATED – MOULD_V2 (FLEX VERSION) [ENG] Cement Sinker Mold Simple mold for making cement fishing weights. Original version: PETG is recommended for printing. Mould_v2: Designed for flexible 3D printing materials (Flex). To increase the…

Pobrania
1224
Polubienia
157
Ocena
5
P
PrintablesDeltaprints

Kitchen Roll or Paper Towel Holder - 2 Heights

Add a touch of modern design to your kitchen with this stylish and practical paper towel holder. Surrounded by smooth 12 mm bars and featuring a subtle guiding groove, this model combines clean lines with functionality. To ensure…

Pobrania
795
Polubienia
113
Ocena
5
P
PrintablesZenoTrace

Ironing test plate Multiple layer heights + settings

Weirdly enough, it's sort of hard to find a calibration table for ironing flow + speed. Also, Reddit seems to have wildly different settings they live by for PETG. This model leaves no guesswork. The models have different thickness…

Pobrania
615
Polubienia
33
Ocena
0
P
PrintablesMalax

SSUPD Meshroom S Feet (Multiple Heights)

Feet for SSUPD's Meshroom S PC case. Improves ventilation and allows usage of standard (non-angled) DisplayPort cables. Uses existing holes in the case that are located below the rubber feet the case ships with. You have to remove those…

Pobrania
556
Polubienia
24
Ocena
5
P
Printablestopse

Gravitrax Junior compatible spacer in different heights

You can never have enough spacers! And as your marble run may get really high, higher spacers might be helpful :-) The model does not use round edges (fillet or chamfers) for easy printing. Version 2, 2024-01-10: updated STL files with…

Pobrania
554
Polubienia
48
Ocena
5
P
Printablesblechbude

Schachtel mit Deckel, Box with lid; 150mm x 65mm, Höhen / heights 40 mm - 150 mm

Schachtel mit Deckel. Abmessungen Innen: Länge 150mm, Breite 65mm, Höhen von 40mm bis 150mm. Gedruckt mit PLA ohne besondere Einstellungen Update 2025-08-05: Höhen von 40 mm bis 150 mm hinzugefügt. ……………………… Box with lid. Internal…

Pobrania
472
Polubienia
30
Ocena
5

Pokemon figures - various heights

Try split model and set higher infill in the "body" Gcodes in multicolor (base + body)

Pobrania
472
Polubienia
93
Ocena
4,83
P
PrintablesStefan Vasko

Mold+for+casting+fishing+weights

The form has a volume of 35 ml.

Pobrania
337
Polubienia
29
Ocena
5

To the heights of music

To the heights of music

Pobrania
337
Polubienia
87
Ocena
5
P
PrintablesMetikumi

Large Fruit Bowl in Two Heights

Introducing my latest creation, the Large Fruit Bowl, meticulously crafted with soft and slightly twisted decorative strands that cascade elegantly to form a stunning receptacle for your favorite fruits. It shines especially well when…

Pobrania
317
Polubienia
32
Ocena
4,75
P
Printables3dprints4life

Small Parts Organizer Boxes (16 Boxes 2 Heights) - The Ultimate Collection (e.g. compatible with Aldi Organizer)

This set contains 16 modular small parts organizer boxes , designed to fit Aldi drawer organizers or other similar systems. Each box has a consistent footprint of 10.5 cm x 6 cm and comes in two different heights : 2 cm and 3 cm . For…

Pobrania
274
Polubienia
82
Ocena
0
P
Printablesjamesbray03

PR Tracker - Tiny Weights

Glue required The bar comes in two halves so it can be printed You may need to adjust your print settings for tolerances I left off numbers so plates and bars could mean anything.

Pobrania
258
Polubienia
42
Ocena
0
P
PrintablestheXorios

Stackable sewing pattern weights with inserted washers

Files for whole project included. Washer diameter=50mm Washer heigh=3mm Useful tool when you are using projector directly to fabric.

Pobrania
249
Polubienia
156
Ocena
4,33
P
PrintablesErik van de Pol

[ALCH] stackable modular boxes in 6 heights and 9 dimensions (169 variants!) (ModuBox)

This is a collection of stackable boxes, compatible with for Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular gridfinity and i have tons of drawers and tool organizer…

Pobrania
243
Polubienia
30
Ocena
0
P
PrintablesMerto_Bohan

Endcap for Archery Stabilizer Weights

A simple endcap to screw on stabilizer end, to add protection and a bit of color. Two version are provided, to fit ¼" and 5/16" screws found on most weights. For improved durability (weak point is the thread) I suggest printing this model…

Pobrania
240
Polubienia
30
Ocena
5
P
PrintablesWouter

Begleri beads for 550 paracord with optional m6 nuts as weights

Begleri beads for 550 with optional m6 nuts as weights. This is a set of begleri beads to be used with 550 paracord. There are two sizes; small (for smaller hands) and large. Of each model there's a ribbed and a smooth version. And of…

Pobrania
240
Polubienia
84
Ocena
4,5
P
Printablesartificialis

GPU Support - extra stand heights

I just included the 3d builder project file, and two additional heights: 105 and 125mm, allowing this to be installed in older computer cases Category: Computer

Pobrania
238
Polubienia
12
Ocena
5
P
Printablesvono-art

Wing Nuts Different Sizes M4 M5 M6 M8 And Included Washer Heights 3mm - 10mm

Wing nuts M4 M5 M6 and M8 for hexagon head screws or nut with washer included in different heights 3mm 4mm 5mm 6mm 7mm 8mm 9mm and 10 mm.

Pobrania
230
Polubienia
34
Ocena
0

gym equipment for lucky/dummy 13 (including weights)

gym equipment including: 1x barbell 2x dumbell 2x 20kg plates 2x 15kg plates 2x 10kg plates 4x 5kg plates 4x 2.5kg plates 4x 1kg plates

Pobrania
229
Polubienia
35
Ocena
0
P
PrintablesMoMoGoBot

FILAMENT SPOOL WITH VARIOUS SPOOL HEIGHTS

YET ANOTHER FILAMENT SPOOL YAY!! i bought a few 1gm spools that included 4 different colors of filament, each individually wrapped and taped around 1 spool, so a bit more than typical filament samples. most of the sample filament spools…

Pobrania
223
Polubienia
42
Ocena
5
P
PrintablesROPI

First Layer Test – CORE One – Multiple Layer Heights

Let's test and discuss first layer on our new Prusa Core One. This model is designed for the CORE One to help test and calibrate your first layer adhesion at different layer heights. It includes four sections, each corresponding to a…

Pobrania
219
Polubienia
28
Ocena
5
P
Printablesblechbude

Schachtel mit Deckel, Box with lid; 180mm x 120mm, Höhen / heights 30 mm - 100 mm

Schachtel mit Deckel. Abmessungen Innen: Länge 180mm, Breite 120mm, Höhen von 30mm bis 100mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Internal dimensions: length 180mm, width 120mm, heights from 30mm to…

Pobrania
218
Polubienia
12
Ocena
5

CYD 2.8" Enclosure Case – 4 Heights

CYD 2.8" Modular Enclosure Case – 4 Heights This enclosure lets you develop your CYD 2.8" project over time by simply selecting the right height. Start with the smallest version for compact Bruce or Marauder builds, then scale up as your…

Pobrania
214
Polubienia
14
Ocena
5
P
PrintablesJocke V

Upgraded Gridfinity Cable Organizer – Now in 4-6U Heights

This is an improved version of my original Gridfinity cable wrap, designed to keep your cables organized, visible, and easy to grab. The new model comes with several enhancements: Available in 4U to 6U heights – pick the size that fits…

Pobrania
212
Polubienia
31
Ocena
4,5
P
PrintablesCloudyNostalgia

2D Winnie The Pooh - Multi Color Different Layer Heights

This is my first time making something like this! I hope you all enjoy it! The model I printed ended up being scaled up to about 127% and it was printed at a layer height of 0.2 mm. The color changes should be as follows for my scale but…

Pobrania
211
Polubienia
26
Ocena
5
P
PrintablesRebelScum

Scx30 Wheel Weights

Scx30 Wheel Weights. No modifications required to the stock Scx30. Prints quickly and without supports. If printed with PLA, each wheel weights approximately 1.3 grams. Denser filaments might be better for making them heavier if needed.

Pobrania
204
Polubienia
26
Ocena
0
P
PrintablesChris Schmuck

HOn30 Locust Heights & Western Climax

The real locomotive was hand made and still runs. I used video stills to make the drawings. I used a Bachmann N scale 70 tonner with the circuit board removed. A 44 tonner would work as well. Category: Hobby

Pobrania
199
Polubienia
19
Ocena
0
P
Printables1994df

Flat bench press and weights

bench press to track your goals.

Pobrania
194
Polubienia
27
Ocena
0
P
PrintablesMike

Shaker or match pellet box 4,5 5,5 mm .177 .22 slugs various heights and grids

I thought the available shaker boxes were a bit steep pricewise and also very crammed for my big fingers. It started with the idea of a somewhat wider grid for convinience and escalated from there into a modular box system when I figured…

Pobrania
188
Polubienia
17
Ocena
0
P
PrintablesFruitieX

Stackable weighted Gridfinity baseplates (larger weights)

Original Gridfinity accessories and baseplates by Zack Freedman: https://thangs.com/designer/ZackFreedman NOTE: If you're going to add weights to the model, please make sure the dimensions of your weights fit in the slot. This model has a…

Pobrania
186
Polubienia
52
Ocena
0
P
PrintablesAllie Fitter

"Universal" Gunpla Base (Various Heights)

"Universal" Gunpla Base As I started getting more my complex with my gunpla displays, I needed to solve the problem of raising my kits in the back and also accommodating the use of many different action bases in the same display. I…

Pobrania
186
Polubienia
54
Ocena
5
P
Printableschobotx

27mm flashlight RIS mount two heights

Rail mount for 27mm flashlight in two heights Category: Sport & Outdoors

Pobrania
184
Polubienia
19
Ocena
4
P
PrintablesJPM Designs

Gridfinity, 1x1, 20 Heights, Magnet Holes

1x1 bins available in 20 different heights. With magnet holes. Not designed for stacking or covers. Easy print, no supports needed.

Pobrania
183
Polubienia
21
Ocena
5
P
Printableswafflecart

Thermalright AXP120-X67 Low Profile CPU Cooler Fan Duct Shroud Intake - Multiple heights

Model of a fan duct/shroud/intake for the Thermalright AXP120-X67 Low Profile CPU cooler to have it intake no warm air from inside case and instead draw cool air from side. Requires no extra parts to mount by using the holes already in…

Pobrania
178
Polubienia
16
Ocena
0
P
PrintablesDiggle

Glasses Stand (Spec Stand) No Text/Better weights Remix

Didn't really like the text so I just removed it. Also changed to a bottom press fit for pennies instead of internal pause and place. Makes it a bit easier and no one is looking at the bottom anyways. I ended up putting a felt pad on the…

Pobrania
177
Polubienia
26
Ocena
4,5
P
PrintablesPeter C

Golf - Indoor Golf Tees - varied heights

Simple indoor driver golf tees (9) with varied heights from 0.125 inches (3mm) to 2.5 inches (63mm). Printing Tip Use TPU for FDM printing on 100% infill and 0.2mm layer height. Usage Testing is underway to see how durable they are when…

Pobrania
167
Polubienia
13
Ocena
0
P
PrintablesFoggydesigns

Adjustable Dumbell Handle for 1" or 2" weights

This model has 3 main parts, but one of them is optional depending on your weight selection. For one handle, you will need to print 2x of the screws, 1x handle and as many of the centering rings as you need. I have tested it with 50…

Pobrania
162
Polubienia
17
Ocena
0
P
PrintablesAdam L

Parametric Keychain Kapsules: Customizable Text, Width, Heights

This is a fully customizable version of my basic keychain holder here . Do you need a convenient way to carry around your essential items? Whether it’s medication, earplugs, or anything else, a custom Keychain Kapsule is the perfect…

Pobrania
161
Polubienia
33
Ocena
5
P
PrintablesSam Schultz

Tekton Three Eights Socket Organizer

In looking for a vertical socket storage for my Tekton 3/8 set I couldn't find anything that had all the spaces for my set and no extras so I made it myself. The pieces are designed to be printed on an Ender 3 bed size (the 6-15mm will…

Pobrania
159
Polubienia
22
Ocena
0
P
PrintablesStarHen

Stack for 0.3/0.4/0.5mm layer heights - RC3 US Headband

I remixed the original version to optimize for layer heights other than 0.25mm by adjusting the size of the gap between headbands and the height and thickness of the supports that hold up the 3 pins/bumps for the shield. pt[3/4/5]…

Pobrania
155
Polubienia
2
Ocena
5
P
PrintablesMetikumi

Classic Curved Flower Pot with Wavy Decorative Lines in four Heights

This classic curved flower pot takes inspiration from the wide, elegant shapes of Roman vases, adding a unique twist with its wavy decorative lines. These lines artfully wrap around the vase, echoing its curves from the rim to the bottom.…

Pobrania
152
Polubienia
60
Ocena
5
P
PrintablesKnot Impressed

Intarsia sinkers for knitting machines (yarn bobbin/weights)

Instead of using bobbins and winding small amounts of yarn, these weights allow use of yarn straight off the cake or cone. They will hold enough weight with friction to keep your yarn on your needles, and can be slid down the length of…

Pobrania
150
Polubienia
55
Ocena
0
P
Printablesmsj

Manta Stack, 8 high for layer heights 0.3 and 0.35mm

Stack of manta face shields that is 8 high. This is my first try with stacking 3D prints but it worked just fine on my Prusa printers so I thought I would share for those who want to try it but aren't sure about stacking it themselves.…

Pobrania
148
Polubienia
0
Ocena
0
P
PrintablesBoogie

Different heights from 0.5 to 5.0 mm

Different heights from 0.5 to 5.0 mm

Pobrania
147
Polubienia
19
Ocena
0
P
PrintablesBuilderBohn

Finger weights

Looking to get your fingers swole? Download and print these files.

Pobrania
138
Polubienia
39
Ocena
3
P
PrintablesFruitieX

Weighted Gridfinity Baseplates larger weights

Original Gridfinity accessories and baseplates by Zack Freedman: https://thangs.com/designer/ZackFreedman NOTE: If you're going to add weights to the model, please make sure the dimensions of your weights fit in the slot. This model has a…

Pobrania
133
Polubienia
22
Ocena
0
P
PrintablesKatona Edvard

Scuba weights (models for casting)

The bigger one is 1 kg,and the smaller one is 0.5kg. I put two small (2.9mm)holes in the bottom of each model so when you need to take is out on the casting sand/clay you can screw in two m3 screws or some woodscrews for puling “handles”.…

Pobrania
131
Polubienia
12
Ocena
5
P
PrintablesSwan_Kikaku

Spiral Fall for Gravitrax V2 (capable of handling 20cm~ heights)

---- I modified the previous model to allow the ball to spin at high speeds with a larger diameter, while ensuring it remains stable and does not topple over even when it exceeds 20cm in size. previous model :…

Pobrania
130
Polubienia
30
Ocena
0
P
Printablesfusionlab

Star Decorations - For Hanging or as Balloon Weights

A collection of stars in a variety of styles These include a space perfect for a UK penny inside to add enough weight to hold down one or two light helium balloons (your mileage may vary :) ). Add a pause or material change in your slicer…

Pobrania
130
Polubienia
15
Ocena
5
P

Stacking Tray Sewing Pattern Weights for Pennies

Here in the US, if you need to weigh something down, pennies are the best bang for your 1/100th of a buck. Let's take advantage of this to make some beautiful, multifunctional pattern weights for cheap – it's just common cents. (Yes, I…

Pobrania
128
Polubienia
80
Ocena
5
P
PrintablesIsaac Corbrey

Fully Parametric Phone Stand w/ Adjustable Angles, Widths, and Heights

Print Settings Rotate the model onto its side for layer strength. I used 15% triangular infill for my print, but if you need additional support increasing the infill should be fine. If all else fails, increase stand_thickness . Parameters…

Pobrania
122
Polubienia
21
Ocena
5
P
PrintablesJoe Carr

Balloon weights

I needed two small weights for my child's birthday balloons. Made these up to do the job. Each weights 6g so perfect for little helium balloons to stop them blowing off!

Pobrania
122
Polubienia
10
Ocena
0
P
Printablesdm

Modified 48 art pencil holder with staggered heights

Remixed this to have staggered heights so that it's easy to see the different colors. Category: Art Tools

Pobrania
120
Polubienia
17
Ocena
0
P
PrintablesScared__Bunny

Sewing Weights 160g

My Wife wanted to buy those Donut weights from a content Creator, but they were out of Stock, so I made her even heavier ones. Also iterated on the design. If you use one of those fancy build plates with a pattern make sure to get a good…

Pobrania
120
Polubienia
117
Ocena
0

Coin Tube Weights - USD Coinage Set

Series of Tubes for USD Coinage to serve as storage and generic weights for maker projects.

Pobrania
113
Polubienia
12
Ocena
0
P
PrintablesMKE Dan

Alexa Echo Dot Max Pedestal Stand (Multiple Heights)

Simple, stable pedestal stand designed for the Amazon Echo Dot Max . These stands elevate the Echo Dot Max to improve sound projection and visibility while keeping your desk or shelf setup clean and organized. Four height options are…

Pobrania
103
Polubienia
9
Ocena
0
P

Curtain Cord Weights

Two identical parts that clip together.

Pobrania
99
Polubienia
8
Ocena
5
P
PrintablesLarteed

Nike Sneakers Air Heights

Nike Sneakers Air Heights

Pobrania
97
Polubienia
9
Ocena
0
P
PrintablesSchnippi

Quest 2 Dumbbell / Weights

I designed this gadget to make to Quest 2 controllers a bit heavier. With the extra weight games like minigolf or fighting with a sword feel more realistic. Also it may increase the fitness aspect. I chose wide washers from amazon, outer…

Pobrania
95
Polubienia
29
Ocena
5
P
PrintablesLWK_256

Weights

This is a model of weights like you can find them in the gym. If you're planning to build a gym and want to present your idea to somebody I would suggest to print those weights out and place them in your gym (people can image the finished…

Pobrania
93
Polubienia
13
Ocena
0
P
PrintablesKyleTW

Bambu Nozzle Wiper - Various Heights - Custom-Built, Easy to Remove Supports

A Bambu nozzle wiper I created after being unhappy with other offerings that were not easily printable. These are offered in increments of 0.5mm height from standard height to 3mm shorter. I've found that the 2.5mm shorter works best for…

Pobrania
89
Polubienia
34
Ocena
5
P
Printablesblechbude

Schachtel mit Deckel, Box with lid; 150mm x 95mm, Höhen / heights 30 mm - 150 mm

Schachtel mit Deckel. Abmessungen Innen: Länge 150mm, Breite 95mm, Höhen von 30mm bis 150mm. Gedruckt mit PLA ohne besondere Einstellungen Update 2025-08-07: Höhen von 30 mm bis 150 mm hinzugefügt. ……………………… Box with lid. Internal…

Pobrania
88
Polubienia
5
Ocena
0
P
PrintablesScout339

Mechanism's Steam Controller Dock with Penny Weights and Hot Glue Feet

This is Mechanism's Steam Controller Dock, but I have modded it to accept 50 pennies at the bottom as weights, 4 small holes to use for hot glue feet, and reduced baseplate thickness to accommodate for the extra weight added by the…

Pobrania
88
Polubienia
8
Ocena
0
P
PrintablesNate DiSalvo

Solid swim bait No weights needed

This modifies the original design so that weights are not needed. Also the loops are on both ends. Print Settings Printer: Qidi tech Rafts: Doesn't Matter Supports: Yes Resolution: Doesn't Matter Infill: 100% Category: Sport & Outdoors

Pobrania
88
Polubienia
7
Ocena
5
P
PrintablesSamdsx

TEA20 counter weights

TEA20 counter weights for the awesome model from @makitprojects_103007. One hole M3 needs to be done in order to add the M3 screw in front, the 2 back holes are already part of the chassis. If you like it please hit the LIKE button, it…

Pobrania
87
Polubienia
11
Ocena
0
P
PrintablesJedadoo

ZWO AM5, Celestron AVX/CGEM - 1" Weight Plate Adaptor For Counterweights

Remixed from https://www.thingiverse.com/thing:4834804. Fixed the center hole on the spacer at 20.5mm for a tight fit on Celestron AVX & CGEM & ZWO AM5 mounts. Print Settings Printer brand: Prusa Printer: Mini Rafts: No Supports: build…

Pobrania
85
Polubienia
10
Ocena
0
P
PrintablesCatsParfait

Small + Chunky S-hook for CSM Weights

Fantastic hook modelled by Tmpx64 ! Print Solid, 100% infill in PETG - Scaled in height and thickness to work with my heel forks and heel weights. 1cm thick, 2inch x 1inch. Please download the original model as well!

Pobrania
83
Polubienia
9
Ocena
5

John Deere - Suitcase Weights with Bracket - 1:8 Scale

John Deere - Suitcase Weights with Bracket - 1:8 Scale Designed to fit 1:8th scale John Deere tractors. Uses M4 Screws

Pobrania
82
Polubienia
6
Ocena
0
P
Printableskilthro

Modular Stackable Shelves - Flexible Heights

I really enjoyed the original model that dewgenenny created. However, I wanted to have more flexibility with the shelves' height and tighten the tolerances quite a bit for a snug fit, as the original seemed a little loose. I revamped this…

Pobrania
81
Polubienia
9
Ocena
0
P
PrintablesHag3D

DUPLO compatible pillar 2x4 and 6 bricks high. Additional heights added...

Update 27.02.2025: Added versions from 2 to 8 bricks height and a 5.5 bricks high version to support multi-level train tracks when placing a 2x16x0.5 brick on top and 1 row pillars (still to be designed) on the sides. 6 bricks is the same…

Pobrania
78
Polubienia
8
Ocena
0
P
PrintablesRedlow

Counterweights for Hadley, using Coins for weight

Do you have a jar of coins collecting dust on a shelf? Put them to good use! This counterweight for Hadley uses a stack of US cents, euro cents or other coins as a cheap and readily available mass. For a general-purpose version with…

Pobrania
78
Polubienia
15
Ocena
5
P
Printablesstereosound

Holder for PowerBlock Elite Dumbbells 2.5 lb Handle Bar Weights

PowerBlock Elite adjustable dumbbells have 2.5 lb cylindrical bars that can be removed/added to further adjust the dumbbell weight. If you don't have the PowerBlock stand and instead just have your set on the ground, this print will give…

Pobrania
78
Polubienia
9
Ocena
5
P
PrintablesShadrack

Insert for Rolling Heights

Insert for Rolling Heights. Take it out of the box and play. Great game, just needed some help making it easy to setup. I keep the tiles in the rolling boxes. added a split version of the meeple holder for those with a smaller printer bed

Pobrania
77
Polubienia
3
Ocena
0
P
PrintablesRiskable

Box (Container) for Calibration Weights

This is a box (container) for this calibration weights set: https://smile.amazon.com/gp/product/B07B8J19DM/ which includes 1g, 2g, 5g, 10g, 20g, 50g, and 100g weights + metal tweezers. It includes a space for the tweezers and should store…

Pobrania
76
Polubienia
15
Ocena
0
P
PrintablesMatt

adult - paperweights - jessica Rabbit

I thought I would appeal to the sophisticated gentlemen out there and boost my download scores... Ha!

Pobrania
74
Polubienia
8
Ocena
0
P
PrintablesFergy7

Family of 100mm Diameter Jars in Various Heights with Covers

As with any cylindrical part design I recommend choosing random instead of nearest start. Fit-up of part was verified at .16 print resolution for both base and cover..

Pobrania
73
Polubienia
6
Ocena
0
P
PrintablesHervea

Mode vase flower with stem - Fleur - Multiple heights

Mode vase flower with stem - Fleur Stem can be found at : https://www.printables.com/model/1000035-stem-for-vase-flower Vase can be found at : https://www.printables.com/model/1295609-vase-with-flat-base-2-variants-and-dervish-spiral

Pobrania
72
Polubienia
13
Ocena
0

International Harvester - Suitcase Weights with Bracket - 1:8 Scale

International Harvester - Suitcase Weights with Bracket - 1:8 Scale Designed to fit 1:8th scale International tractors Comes in two different varieties. Set of 10 and Set of 12 suitcase weights with mounting brackets to match. Brackets…

Pobrania
70
Polubienia
7
Ocena
0
P
Printablesbillsmithem

Quest 2 Counterweights

The Quest 2's habit of sliding down my face whilst sim racing because it's unbalanced was driving me nuts, so I made these. Counterweights for KIWI design Comfort Head Strap for the Quest 2. Designed to snap onto the back on either side…

Pobrania
68
Polubienia
37
Ocena
0
P
PrintablesJPM Designs

Gridfinity, 4x-1x1, 20 Heights, Magnet Holes

1x1 bins split into 4 equal sections. Available in 20 different heights. With magnet holes. No top. Not stackable. Great for tiny or long narrow items such as cotton swabs, tooth picks, tweezers, brushes, glue tube, pens, cutters,…

Pobrania
67
Polubienia
11
Ocena
5
P
Printablesstefvoijen

Deadlift platform for miniature weights

Printed at 0.2 heigt 0.4 nozzle

Pobrania
65
Polubienia
17
Ocena
0
P
PrintablesEzra Black

finger weights

for when your fingers need a workout.

Pobrania
65
Polubienia
1
Ocena
0
P
Printablesakh223

KRG Bravo Buttstock weights

Small molds for adding weight to a KRG Bravo stock in the buttstock area. There are different items. One goes in the under either the flat cover, or the Hook style cover that is on the bottom of the stock and accessed by a single screw.…

Pobrania
64
Polubienia
6
Ocena
5
P

Wheel weights (carrier) for Traxxas TRX4

Designed a pressfit-carrier to add ~57g weight per wheel for the Tactical-Unit Wheels. I like the Wheels alot because of the scale heavy duty look with central tire Inflation system. But i ordered them pre mounted, so i needed a solution…

Pobrania
62
Polubienia
28
Ocena
0

John Deere Rear Wheel Weights - 1:8th Scale

John Deere Rear Wheel Weights - 1:8th Scale Uses M3 screws

Pobrania
60
Polubienia
4
Ocena
0
P
PrintablesARegularBear

Apple Watch Stand Base - Inset Weights

A remix of BlackBanshee 's Apple Watch Stand - Weighted . See the original thing for the other two parts. Instead of two horizontal cylinders for the pennies, that easily fall out if you're taking the stand apart to remove your charging…

Pobrania
60
Polubienia
7
Ocena
0
P
Printablesm_collectable

Triple Heart Makeup Organizer Holder — Low-Poly Lattice and Varying Heights

A connected triple-heart makeup organizer with a low-poly silhouette and repeating heart lattice cutouts. Three compartments to hold lipsticks, brushes, and palettes. They stay visible and are easy to grab. Prints easily without supports…

Pobrania
59
Polubienia
19
Ocena
5
P
PrintablesPrintCraft

sorting bowls different sizes and heights! Vase mode ready

These are sorting trays that I use to keep an overview of the things I need to remove and then build up again

Pobrania
57
Polubienia
11
Ocena
0
P
Printablesobservatoer

BMW F850GS - Barend Weights - Lenkerenden

I asked myself if the 65g (each) barends of my BMW F850GSA do something and changed them for 15g ABS (0.2mm layer, 5 perimeters, 5 layer top/bottom, 25% gyroid). Besides the 100g saved weight, there is no increase in vibration. I might…

Pobrania
57
Polubienia
8
Ocena
0
P
PrintablesFuorissimo

Wall support for 3D masks, clothes and accessories. Various lengths and heights. Two type of wall mounting, 1 X M4 screw or 2 X M4 screws.

Ideal for creating an exhibition wall of 3D printed masks or objects. I created this wall support in various lengths to hang 3D printed masks (Iron Man, Deadpool, etc) or other objects. It should resist +2kg. There are 3 lengths from the…

Pobrania
56
Polubienia
11
Ocena
5
P
PrintablesHaydenWizard

Weighted D20's! Trick your friends! No hardware or weights

I made these dice as the perfect joke and prank! Great for tricking your friends without them even realizing! These dice are subtle but potent , they don't roll strait 20's or 1's but they tend to roll one a lot more often than the other……

Pobrania
56
Polubienia
7
Ocena
0
P
Printablesblechbude

Schachtel mit Deckel, Box with lid; 150mm x 35mm, Höhen / heights 30 mm - 150 mm

Schachtel mit Deckel. Abmessungen Innen: Länge 150mm, Breite 35mm, Höhen von 30mm bis 150mm. Gedruckt mit PLA ohne besondere Einstellungen Update 2025-08-07: Höhen von 30 mm bis 150 mm hinzugefügt. ……………………… Box with lid. Internal…

Pobrania
55
Polubienia
5
Ocena
0