Liczymy pasujące modele…
Various designs for XT30 connectors Here you will find my designs for the XT60 size and MR30-M . News 12.03.25 Step files available 22.11.23 added design of angled and round mounting bracket 02.11.23 added design of standard mounting…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
About I have a one socket and a plug that is super hard to remove, so I created a handle to make it easier to remove the plug from the socket. Should be compatible with standard angled plugs used in computer electronics, home appliances…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Handle on my parents' refridgerator broke off and I found a great replacement for 3d printing by @HolesAreRound, but the handle itself was too long for the specific model my parents have - I had to shorten it so that the inner distance…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DE: Einfaches Ersatzteil für ältere Blanco Select Müllsysteme mit Soft-Close Funktion. Die Stützstrukturen an den Ecken sind in diesem Fall sinnvoll um ein besser Passform zu ermöglichen. Als Material empfehle ich PETG um vorzeitigem…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Freestanding or can be attached to a surface with mounting tape. Version 1a This is a fraction larger to fit the older Sonicare models (I did have a Sonicare HX8911/04 that I bought in 2017 that slightly bigger). Our newer Sonicare 4300s…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena jednego wariantu
Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…
Wydruk około 4,11 €–5,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple cover for electrical outlets with an outfeed for cable.
Wydruk około 1,65 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The stock MMU3 Selector tends to break when tightening the clamp that holds the FINDA in place. My first one broke, as it seems they made the hole larger than the previous model. I ended up remodeling a couple features on it. First, I…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compact Electrical Junction Box for WAGO 221 (or similar) Connectors This is a 3D printable model of a compact junction box designed for the neat and safe enclosure of wire connections using lever connectors, such as the popular WAGO 221…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EEW Nano bobbins can be used on the EEW 6.0 flyer, but they leave a sizeable gap on the flyer rod. the bobbin can slide to the left at higher speed and drag the break band with it, which will eventually catch on the flyer arm and stop the…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
The grid is made in Prusa Slicer (no bottom and top layers) and can be omitted. The top part has a good fit to the bottom part due to a small rim. I printed in PETG. Only screws needed (4 x M3, 8x M4).
Wydruk około 4,25 €–5,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
notes d'impression Impression en 0,1mm DETAIL Impression avec supports partout
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Upgrade from your traditional electric doorbell button to a modern Reolink video doorbell without any drilling or modification to your wall. Features: - Designed to fit standard (Schneider) Electric doorbell mounting boxes - Direct…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ho creato un sopporto per il telecomando del garage. Le dimensioni sono compatibili con gli scomparti standard delle vetture per il trasporto delle bottiglie.
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
Many hoses come with aluminum fittings. When attaching these to brass hose bids the dissimilar metals cause a cathodic reaction (the aluminum corrodes) that causes the fitting to seize and makes disconnecting the hose difficult. This…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the Frigidaire 318242275 (Electrolux ICON) stovetop knob bases. Although the part you grab is metal, the base is plastic, and the knob post that connects to the stovetop often cracks at some point, and then the…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Electrolux vacum adapter
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Krytka na kartáček ,aby hrotem něco nepoškodil při uložení např. v batohu.
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
Miniature template for drawing electrical schematics. See also: Template For Flowchart Diagrams https://www.printables.com/cs/model/792825-french-rulers Template For Logic Diagrams…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Electric Cable Diameter 4,5mm -> 8mm Mounted using screws or double sided tape
My dimmer knob kept breaking so I made one myself along with the wall plate. Modeled a couple other plates as well and just kept going! The size of these covers are modeled to be midway size. Many to choose from. If there is something…
Try printing at 80% of speed and very hot bed (75° ?) Best R
Improved version - combination of 2 models Better locking mechanism to secure the wires larger adhesive area for double sided tape combination of following models:…
Improved version Better locking mechanism to secure the wires Want to have a commercial licence on this model? → Join the CLUB :)
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
Here's a B.C. Rich Warlock style guitar body I made. This is a fully functioning guitar body, just add a neck and electronics! I started making this in July 2022 right around the time Stranger Things 4 ended since I wanted the guitar from…
Parts print flat and snap together. Print shorter legs for electric guitar and longer legs for acoustic guitar. The connector and right and left back are the same for both versions.
If necessary, you can scale it in the slicer. As a first approximation, the rule of three can be used. The model is designed for an inner diameter of the roll of 33 mm. If, for example, an inner diameter of 40 mm is required, the scaling…
…If you don't feel like springing for a coffee, please at least be sure to hit like & post a make, I'd love to see your prints! A super quick design to turn your Spiral Vase Rose into a glowing electronic tea light with a natural rosebud…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
This is a fun model to print because it's quick (49 min), and multi-color makes it look 10 times more awesome! Change your filament color/ material at layers 26 and 30 to achieve this look. Make sure you turn supports ON, or else your…
Every model I found for hiding the cable of the Braun / Oral-B toothbrush wall charger was not enough good/polished/perfect/minimal for me so I designed this and I hope you will enjoy this too. The design is based on the german 55mm…
Features A magnetic connector for low-powered, removable electrical connections Fits two 6 x 2mm neodymium magnets (Edit: Added files for 6 x 3mm, 5 x 2mm and 5 x 3mm) Compact and easy to build into your models - roughly 10mm tall and…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it. I use a 0.6mm nozzle and high layer…
4 in 1 Schlüssel für Schaltschränke und Industrieanlagen. 2x 4 Kant Schlüssel, 1x Dreieck und Schaltschrank Schlüssel. am besten mit 60% oder mehr Füllung drucken für Stabilität. 4 in 1 key for control cabinets and industrial plants. 2x…
This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…
ABOUT THE RIG The Rig is mostly printed DIY helper stand for testing electronic components in an easy and accessible way. This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing. The rig…
This 4-Way Utility Key is designed for opening a wide range of electrical, utility, and service cabinets. The compact cross-shaped design combines multiple common key profiles into a single tool, making it ideal for technicians,…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
(The links below are affiliate links. I may earn a commission at no extra cost to you, helping keep my work free and continuously improving my designs.) This case is meant for this Electronic Load:…
To make the ski lift you first need to print all the parts. Print 8pcs of; “wheel-connect2”, wheel-connect1, wheel-connect3 Print 16pcs of “small-wheel” You can add som grease to make the small wheels spin better. You also need to use…
A stylish key cover that turns any fey into an electric guitar. Look at the second photo for assembly. If you have any questions or concerns feel free to comment.
Electric mining drill from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The drill can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included…
The 10mm diameter, 3mm height magnets to hold the two halves of the UFO together are optional, as a display piece gravity alone should be sufficient. Use a piece of wire to hold the UFO over the base at a height and an angle you like.…
This is a modular stand to hold the XSC G600 electronic microscope. I designed this because the original stand was terrible. Use 4 x m5 nuts and 4 x m5x30 bolts with hex head to assemble the stand. Important The arm-1.stl (orange x 2) and…
CArts Lukisegler !! Attention !! There is an updated version of the fuselage of the Lukisegler: https://www.printables.com/de/model/927540-lukisegler-20-electrical-rc-glider CArts Lukisegler (english) Span: approx. 1700 mm Body length:…
electric cabinet key (triangle)
Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector…
Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…
Introducing a new and improved template for drawing electrical schematics. With the help of the template, you will be able to draw cross-sectional electrical diagrams. It is suitable for beginners and students. The template is designed so…
Recommended layer height 0.15mm - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 09/05/2022 Electric dice REV1 d6 layout correction
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Remix-Ready I added a BLANK version for you to add your own language/font. ------- For this look start with White then switch to Black, then Red last. Quick Guide to changing…
I decided to create my own water pump using a 775 motor I had lying around. It is capable of some pretty hefty flow depending on how big you make the body and impeller. If you find that your motor is overheating, lower the height of the…
A print-in-place travel case for 2/4/6 Oral-B toothbrush heads (Vitality/Pro/Smart/…, NOT iO/Pulsonic), including 2/4/6 stands. Before that we just carefully placed them upright somewhere, but they often fell over. I had several…
This is the third version of my headless guitar design. The main improvements are the shape modification and the installation of a floating trem system. I have uploaded the step files in case anyone is interested in customizing it (make…
Increased the size a little to mostly fill the MK3S+ bed(disabled skirt). I also added a small box on top to allow a filament swap when the main section is done to give it a more cpu look.
Please note that the license for this print is for the layer-change G-code only. The Roses of Unicofil flower used as an example remains “Attribution-NoDerivatives” and is itself unmodified in this print. By dynamically adjusting the…
NOTE 2025-04-23: I just uploaded a depth gauge, which will make it very easy to determine the gap between the wall and electrical box faces. This gauge makes selecting the correct spacer thickness quite easy. That model is here: NOTE…
Just "discolored" remix with added brim on selected areas
The small electric pole from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The pole can stand alone or could be glued onto an empty tile that is part of our grid system. Empty tile and…
A wallet-sized stencil for quickly drawing electronic schematics. Includes resistor, capacitor, inductor, LED, switch, ground, voltage source and junction symbols. Perfect for students, engineers, makers and hobbyists
It's a small pick stand which turns your guitar-pick into a Telecaster body. It should fit all picks up to 2mm thickness. You can print it as it is and won't need support. It's a good idea to place the seems in line or even use the…
This is a remix of the '7 inch LCD Case' by arrowmeiwaracing, which can be found here. I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint server, I came across the original by…
Snaptronics gives you a bunch of solder-free 3d-printed bricks to build various basic circuits in a breeze on a magnetic snap-fit basis.
Just a remix to add some detail https://www.printables.com/model/117363-brain-electronic-circuit-wall-art/remixes I printed this with the Revo .25 nozzle in 3 and 4 colors. Print time took 4+ hrs no brim let it completely cool before…
if you need a different size let me know
Parametric junction box for electric wiring. Use the default 100mm x 100mm x 50mm (8 holes sized for M20 cable glands) STLs supplied, or adjust the OpenSCAD file to control dimensions, number of holes, cable gland diameter and so on. Make…
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Here you will find my designs for the XT30 size and MR30-M . News: 12.03.2025 STEP files available XT60 Male vertikal/ horizontal mount simple and slim design suitable for a wide range of applications To additionally secure the plug in…
You can use a 3660 4s Brushless motor. The connection betwen the prop and the motor is a Gt2 Pulley with pressfit. You should print the whole Thing in 0.2mm and a fibre reinforced Material. The Flow corrector gets glued to the back of the…
Version 2.0 Dive into the future of DIY electronics with our Parametric Waterproof Electronics Box. This innovative design allows you to customize and modify the enclosure using Fusion 360, giving you full control over dimensions and…
This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…
Organizer for Oral-B electric toothbrushes, fits 4 plus one charger. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant minimalist design. Easy print, no supports needed for any part. Printing Tips…
prints best with 2 walls and 10% infill, suitable for 175mm TIG tungsten electrodes with hex sides, so it cant roll of the table :) when going with more strength, you might want to use the looser Version, since the threads get kinda…
Electric toothbrush holder for 4 toothbrushes. should fit most if not all oral-b electric toothbrushes
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 17th Dec 2022: Updated "Christmas Lantern Box - Middle.stl" as the holes at the bottom was a bit offset. My bad! IF YOU LIKE THIS MODEL, CONSIDER ALSO DOWNLOADING ANOTHER…
A rear mounted electronics case for the Ender 3. At the back, there is room to mount a Raspberry Pi, fan, buck converter and two relays on the left. On the right, either the standard board with four TL smoothers or an MKS Gen L or SKR1.3.…
Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨
IMPORTANT : this model is about 20mm longer than the ender 3v2 print bed. So you will need to print this on a different machine or alter the model before printing. If you don't want to do that you can take a look at my original version…
9/10/26: Ploutone no longer makes the headless bridges used in the original models. There may be remixes for alternate part compatibility! Welcome to OpenBass! This is my first DIY guitar project. There are many 3D printed guitar projects…
Introduction This rubber band gun is based on the clever trigger mechanism used in “M1911 Rubber band gun” (https://www.thingiverse.com/thing: 3053501) and “MINI rubber band pistol” (https://www.thingiverse.com/thing:2740883). The goal…
For the easier application of static grass on the model of railway, I created a model of grass applicator. For more details, check the article: https://blog.prusaprinters.org/3d-printed-railways-size-h0-187/ Print instructions Everything…
Sound sample 3d printing tips I printed most of the parts using a layer height of 0.2mm. But for the bigger pieces, I bumped it up to 0.25mm. This change helped speed up the printing process without compromising the strength and overall…
Updated feet to print in black Added a hand touched up version to clean up color bleed. Remixed from @JDubya_221134 https://www.printables.com/model/328966-electricity-will-kill-you-sign
Se below for update (V5) For this model you will also need 4x M3 heat brass inserts and 4x M3x12 hex screw I print mine in PETG 0.4 nozzle 0.3 hight 3 layers and 25% cubic infill Drill the holes with a step drill as needed on work sight,…
After printing and painting the rocket and crater, use a bit of wire to hold the rocket over your tea light at the right height (see picture). The rocket's back side pod is hollow to help with drilling a small hole to insert the wire.…
Resolution: 0,2 mm Infill: 40 % Material: PLA
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
“CM3588 NAS Case Desktop Standalone” - pretty much this.
Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.
3D Printed Telecommunication Tower (1:100 Scale) Description: This meticulously crafted 3D model of a telecommunication tower, scaled down to 1:100, is ideal for 3D printing enthusiasts. It faithfully replicates the design of a real…
A refined selector, with smoother filament paths and a robust blade holder. Someone raised the point that when you run out of filament, the return pathway is still quite problematic. However, as you will only need that return pathway when…
This is an electical box that i designed for my security cameras. It does not meet code but it might be useful for small projects. You can change the size by editing the base sketch in the object “box” and the depth of the box can be…
Handy Cheat Sheet for calculating Volts, Amperes, Watts and Ohms using just two variables. Fusion360 design added for you to improve upon. Please share your feedback and comments :-)
