Wyniki wyszukiwania: esh

Meshy.ai Test. Classical Statue.

Playing with Paid version of MeshyAI HighPoly Mesh Output + post Texturing. Verdict. Slightly better mesh but messy texturing (seams are not clean). Displacement seems to be less predictable. Probably just need to play with it a bit more.…

Original Prusa Enclosure (OPE) Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5/S, MK3.9/S & MK4/S - MMU Not Required)

Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…

Rasberry Pi 4 Model B Case with snap fit mesh lid

This case has 4 versions: Plain : No cutouts and no mesh Plain cutouts : This version also has no mesh but it has slits for GPIO and camera cables Mesh standard : A mesh is added in PrusaSlicer to the 3MF files. This only works when you…

Bismarck Battleship

Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…

Bonsai / Plant Pot with Drip Tray, Drainage mesh

Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…

HMS Hood Battleship

Printing assembly instructions below! The HMS Hood, the first of the Admiral-class battlecruisers built in 1916 for the Emergency War Programme. Since then it has been a feared battleship and a proud jewel in the Royal Navy. Sunk by the…

SSUPD Meshlicious Fan Mount 92mm

The SSUPD Meshlicious fan mount is inspired from chaosmage project. I have optimized the holder to be more stable and is not blocking any airflow. With this fan mount you could improve the VRM and mainboard cooling. Fits perfectly for…

mATX/ATX IO Mesh Shield Blank

IO Shield blank for mATX/ATX. Printed in Jessie Black PLA on Prusa Mini+ Added modifier box to interior for grid infill 25% and zero top and bottom solid layers. After aligning the motherboard ports with the shield cut out corresponding…

Epcot Spaceship Earth (Hollow)

Wife needed this as a planter so I hollowed it out.

WaveShare 7.5" e-Paper case - symmetrical borders

WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…

Anti-Wobble Z axis bracket with Floating Driveshaft Bearing

Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…

Suction Cup Mount for ANY Fleshlight/ Fleshjack Model

Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…

Fast Bed Mesh Level Grid

it s the fastest to print currently ~~20m connecting element for simple peel off

Nvidia Jetson Nano Case – NanoMesh Mini

NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…

Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5, MK3.9 & MK4, MK4S - MMU Not Required)

24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…

Mesh / Wireframe Easter Egg

Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…

Driveshaft #4 Unimog RC edition

This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…

Case for a Raspberry Pi 4b + Waveshare POE HAT B or C

Cases for Raspberry Pi 4B with POE Hat from Waveshare. PoE HAT B with OLED screen or C without the screen. Bottom and top cases snap together without the need of screws and/or nuts https://www.waveshare.com/poe-hat-b.htm…

Monkey Skull Chalice AI Mesh Generation + Blender Displacement How to Video

Monkey Skull Chalice. HOW TO VID.

Enclosure for Waveshare ESP32-S3-ETH OV2640 CAM LAN RJ45 POE

This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…

MK3 Original Prusa Enclosure (OPE) Mesh Side Boxes (No MMU Needed) - Deprecated

UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…

Al'kesh - Goa'uld bomber/transport

Al'kesh Bomber/Transport from Stargate SG-1 at 1:250 scale

Classic Horseshoes Game

Part of the Classic Games Collection Just the standard Horseshoes game without the metal parts. Requires at least 4 Horseshoes and 1 pole to play. There are many rule sets, including "official" rules.....but the most basic I know is: 4…

Headband for Faceshield (PETG or Nylon) Compatible with Prusa Faceshield

Since many of you had problems with attaching the Shield to the face with rubber bands we proudly release our Remix for a Headband. It is tested by medical personal and has the big advantage of not giving you pressure points anymore,…

Lucky Horseshoe Magnet

Easy to print without supports.

Octoprint Box - Raspberry Pi 4B, Waveshare 4.3" DSI

This box supports following components: Raspberry Pi 4B Waveshare 4.3" DSI display ( https://www.waveshare.com/wiki/4.3inch_DSI_LCD ) Noctua 40mm 5V fan - NF-A4x10 5V PWM 1-channel relay (unfortunately not exactly a typical one:…

SSUPD Meshroom D 25mm Tall Feet

This are 25mm tall feet for the SSUPD Meshroom D. These are ~18mm taller than the original so your GPU can get more airflow for lower temperatures. Note: these do not fit the Meshroom S. Printed in PLA with a 0.6mm nozzle and 0.3mm layer…

Rounded corner helper for faceshields

Currently a lot of makers are printing faceshields as "Makers vs Virus". To cut the rounded edges easier, I have created a small helping tool. The tool can be adjusted via OpenSCAD. The 80mm diameter variant is attached. 80mm diameter…

Another Driveshaft, again !

The is the new driveshaft that will be used in my RC Car V2, five times ! It drives the wheels (that's 4) and is also used for the front transmission. The overall length is ca 60 mm and it is still a double universal telescopic joint.…

Headband for faceshield

A headband made from 3 pieces. Two identical flex pieces to make the band and a size adjustor. Is reasonably comfortable. Could serve as a replacement for when elastic bands are out of stock. Could also be disinfected better. However the…

Original Prusa Enclosure Mesh Side Boxes for MK4

The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…

Prusa MK3/S/+ Mesh Sidebox 2.0 Redux

I wanted a longer and wider sidebox for my MK3S+, so I took dotson90 's excellent Mesh Sidebox and remixed it, albeit with only the left sidebox. However, you should be able to mirror this model to create a right sidebox as well. I made…

Death Star Egg Cup (AI -Meshy Experiment)

Death Star Egg Cup - Testing out Meshy web site for generating 3d models for use with Blender displacement. Evaluation: LumaAI is better. Meshy offers more refinement and prompt options than LumaAI. But its going to cost you after your…

16pt/25pt Bed Leveling Mesh for 220x220mm Bed

This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 20mmx20mmx0.2mm squares in a 4x4 grid with 2x200x0.2 lines connecting each grid element to provide whole…

Adult Mask with Eye Mesh

Uma--Maheshvara (Ball-Gazing)

Uma--Maheshvara (Ball-Gazing) The Iconography of Play: Decoding the “Circle Mudra” in Divine Lila The vast sculptural tradition of Hinduism is governed by mudra , the precise language of hand gestures that conveys divine attributes and…

Crazy FAST Voodoo Headband Prusa Faceshield compatible

UPDATE New version 2.2 (more bleow) This print uses Voodoo magic and a 1mm nozzle to enhance print speed while still producing a good quality finish. This print uses Voodoo magic to enhance print speed while still producing a good quality…

Warning Sign: This Machine Knows No Difference Between Plastic and Flesh

A comical, yet serious sign that is sure to fit in with any 3d printing setup. A 3mf file with color changes is provided, and NO MMU IS REQUIRED! Wanna use it for a different machine? (cnc, router, mill, lathe, etc…) Make your own remix…

Meshtastic Solar Station

I released the first version of the Meshtastic router station in March 2024. Since then, I learned a lot, designed my own Meshtastic motherboard PCB, and completely changed my original design. The result is this second version. Why…

Prusa Mk2/2.5 Mesh Sideboxes

Loved the mesh sideboxes for the Prusa MK3 but could not find any for the Mk2.5. These Sideboxes clip onto the threaded rod of the Mk 2/2.5. Gcode is for PETG and has 2 stops for color change built in at the right points. Have also…

Meshtastic Housing for Pole

Housing for mounting antenna and radio directly on pole. Print with PETG for that weather-resistant housing. Spray the inside of the enclosure and the insert with PRF 202 to make it waterproof. The inserts for Heltec and RAK are optimized…

Waveshare HDMI to CSI adapter case

This 2-part case is designed for the Waveshare HDMI to CSI adapter card. This card is used to convert the video signal from an HDMI device to the CSI connector on a Raspberry Pi. It can be used to interface HDMI webcams (like a GoPro) to…

Meshes / Fences

Again for modeling.

Prusa Faceshield 0.8mm Stacked 4pcs/print - WORK IN PROGRESS!

We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…

A Sweet Friendship Refreshes The Soul

This sign honors friendship. It was printed flat and does not need any support material. PETG was used with a 10% infill. The .3mf and .gcode files contain a color change for the words.

FISH CARP FRESHWATER COMMON KAPR RYBA

FISH CARP FRESHWATER COMMON KAPR RYBA

Lilygo meshtastic T-deck screw/zip holder

Depth modified for official case. Can be used in pegboard, as car holder or to "plant" device. Sized for optional cover Official antenna https://www.thingiverse.com/thing:6792300 Big antenna…

Driveshaft #5 Peugeot 3008 RC edition

This is my fifth take on this crucial part… It will be used on the front axle of my new RC car project - Peugeot 3008 RC. This time I wanted to reduce the size as much as possible while still using no screws and keeping the ability to…

Beer Nukatap tap handle with Waveshare 2.7" e-ink display

Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle

Simple faceshield with A4 foil

Jednoduchý obličejový štít. Po vytisknutí roztáhnout, vložit A4 fólii pro kroužkovou vazbu, nasadit gumičku. Žádné řezání ani děrování fólie. Navíc se dá fólie kdykoli lehce výškově posunout. Simple face shield. After printing, stretch,…

IKEA Jonaxel Mesh Basket Hex Wall

Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Hexagonal pattern design.

1.25 " cheshire eyepiece for telescope - reparable

Here is my version of the Cheshire eyepiece, in a 1.25" (31.75 mm) version. I split it in 4 parts, so i can 3D print all of them, in two colors. No glue needed. The crosshairs is replacable! this is so fragile, i wanted the eyepiece to be…

1mm VoodooFaceshield V3.4

Update June 21: The Faceshield turns out to be also sliceble with current versions of Cura when setting Z Seam Alignment to “User Specified”. Settings down below.…

DeepCool Matrexx 50 Mesh Honeycomb Front Panel

Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…

Mesh experiment

When it stops printing, just put there some window mesh, adjust it with magnets and continue printing.

Meshtastic Solar Housing for Pole

Housing for mounting solar powered radio on pole. Print with PETG for that weather-resistant housing. Spray the inside of the enclosure and the insert with PRF 202 to make it waterproof. The prints are optimized to not require print…

Stacked 4 high snap in faceshields

Based on the design by made by HanochH ( https://www.thingiverse.com/thing:4233193 ) A ready to run stack of 4 faceshields. You can snap in an A4 or 8.5 x 11 transparent sheet and lock it in to place! No hole punch required!

Divider for IKEA Jonaxel Mesh Basket

Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.

Cheshire cat Wall art

Bonjour à tous. Je vous partage un wall art avec le Chat du Cheshire de Alice aux pays des merveilles. Dessin trouvé sur le net. Pour la modélisation, j'ai fait avec Paint 3D pour retoucher l'image et séparer les différentes couleurs pour…

DreamQuest Mini PC - Refreshment base

Simple model buil with thinkercad. I tested with PLA and with a Creality Enver V3 se. I made 3 models for my 3 Mini PCs dreamquest at home. Any question, send me a email with the subject: “Mini-PC Dreamquest Fan” to [email protected]

FabLab U. de Chile FaceShield v5 4 stacked

Stacked remix of the FabLab U. de Chile FaceShield . 4 stacked faceshields with 0.2mm separation between each one. Gcode for Ender3 printers and STL files. Print instructions Optimized for 0.4mm nozzle.

Veggie fresh box - Garlic

This is one of a total of four fresh keeping boxes for leftover vegetables: Garlic You can find the other three (Tomato, Lemon, Onion) here . Printing information Layer height: 0.20mm Infill: Support Cubic 20% Support: none If necessary,…

RefreshRack

Introducing a practical solution for storing your drinks in your Tesla Model Y. This 3D printed insert fits perfectly in this under-seat storage box from Temu (https://share.temu.com/BY8kgFcX30A), holding up to six cans securely. Whether…

1mm nozzle version of Crazy FAST Voodoo Headband Prusa Faceshield compatible

UPDATE There is a new version: https://www.prusaprinters.org/prints/29052-1mm-voodoo-faceshield-v34 This print uses Voodoo magic and a 1mm nozzle to enhance print speed while still producing a good quality finish. ATTENTION!!! These files…

Hex Mesh Fruit Bowl

The variants have different minimum base thickness. The example variants: a single 0.2mm layer at minimum, for the most gradual overhang behavior on the underside 7mm for a heavier base and much more intense overhang situation solid for…

Bolero fresh bag holder, stackable

Bolero fresh bag holder, stackable, 2 drawers, 1 cabinet for 72 bags

Framework 16 Air Flow Mesh with Expansion Cards Storage and Present (dGPU ONLY)

Framework 16 with dGPU ONLY - It works great. I have been using this printed and so far - it's great!!! I recommend printing in PETG with at least four perimeters and 0.2mm layer height. It does need some supports. The holes should each…

CORE One Mesh purge bin

Loved Mesh Side Boxes in Prusa Enclosure with MK3/4's and wanted the same esthetics and similar functionality for the CORE One. Remix is of 3mm flat bottom variant of Purge bin as that matches the closest to the Mesh boxes, which means…

Cheshire Cat Fridge Magnet - MMU/XL

My wife wanted a multicolor Cheshire Cat as fridge magnet for a birthday present for a friend of her's and I came across the awesome model from @Tims_3d_world which was the perfect base for what I needed. Tim was kind enough to change the…

Faceshield for Magnifier / Loupe by Maker Factory

Some health professionals, such as dentists, use a magnifying glass in some procedures. This model is compatible with some magnifying models on the market. Print instructions Doens`t need supports. You can print with 0.6 ou 0.8 mm noozle…

Polygon Box Mesh

PETG

Fractal Design Meshify 2 replacement front panel

This is a replacement panel for the front of the meshify 2. This allows fans to be mounted directly behind it with the radiator inside the case. Designed with 120 x 25mm fans. I happen to have ek vardar fans with non standard mounts,…

Coffee knock-box mesh

An accessory for the espresso knock-box by @thenickdude . Prevents mould from growing inside the container. Print with 100% infill. Like it? Send me a coffee! ☕

Resizeable insect or wasp mesh frame

You can resize this model in FreeCAD or PrusaSlicer. Put a piece of insect mesh between two frames and glue them together. The tiny holes are suitable for nails.

A193 Mesh Riser for concrete pours

I carried out a concrete pour recently for which I was reinforcing with A193 mesh. I forgot to order risers to hold the mesh so quickly designed and printed a number of these to suspend the mesh at around the 55mm mark. Support has…

Waveshare 4,3" DSI display mount & cover

Cover for Waveshare 4,3" DSI Display(such as this one) and mount for Articulating Raspberry Pi camera mount system. Cover is bends into place with live hinges(sides first, top and bottom to lock it into place, M2,5 screws to secure it)…

Pusher (pousseur) moulinex easy fresh

Hi everybody, I make this new pusher for my Moulinex easy fresh grater. I broke the original, too fragile! I redesign more stronger and in one volume, to give in easy to wash. Print with PETG filament. Have a good print ☺

NXZT H440 Mesh Side Panels Mod

This is a front and top panel design for the NZXT H440 Case which aims to fully open the airflow for the PC and provide mesh-based solutions for dust filtration. As a result, the front and top panels include room for a “door screen”…

FISH FRESHWATER COMMON RYBA

FISH FRESHWATER COMMON RYBA

16pt/25pt Bed Leveling Mesh for 180x180mm Bed

This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 16mmx16mmx0.16mm squares in a 4x4 grid with 1.6x160x0.16 lines connecting each grid element to provide…

Higher Box for Raspberry Pi Compute Module 4 IO Board, upper part replacement for WaveShare WS-19195 box

If you want / need use CM4 with PCIe TO M.2 Adapter Pi Compute Module 4 (WaveShare WS-19091) in WaveShare WS-19195 box - you will find that you cannot close original box. This was reason that I created new higher upper part replacement…

Case for RAK wisblok 19007 and battery, meant for meshtastic use

I purchased a Meshtastic starter kit for a RAK19007 WisBlock (and RAK4631) with a 12x40x65mm battery, only to not be able to find a case that fit that battery. This is my solution. This case features thin spots over the LEDs so you can…

GoPro mount for Prusa Faceshield - light attachment

Ther are a lot of GoPro Mounts that can be used, also for Flashlights or LED. https://www.prusaprinters.org/prints/11407-handle-bar-flashlight-gopro-bracket-318-mm Included with the design is the Prusa RC3 Faceshield for dentists. Print…

BATTLE SPACESHIP BITEVNÍ VESMÍRNÁ LOĎ

battle spaceship space rocket galactic bitevni vesmirna lod vesmir raketa

WaveShare Jetbot mount for Turtlebot3 Waffle plates and lidar

This model allows you to mount a Turtlebot3 waffle plate on your WaveShare Jetbot robot. This then allows for the mounting of additional sensors includeing lidar, imus etc. Designed to print without the need for support. Source:…

Mesh experiment - Beetle

This model is not really flexible because of the frame. After few layers stop printing and put there material of your choice. Adjust it with strong magnets far away printed motive because of printing head. Than continue with printing. Be…

BATTLE SPACESHIP 2 BITEVNI VESMIRNA LOD

BATTLE SPACESHIP SPACE ROCKET GALACTIC BITEVNI VESMIRNA LOD VESMIR RAKETA

Waveshare OV5640 USB camera case/magnetic mount

Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).

Lešij (Leshy) - Slavic forest demon, guardian of the forest 1 (three colours)

Lešij - Slavic forest demon, guardian of the forest (three colours) - 20 cm Wall art, matrix for graphics and frottage

FEA Hex Mesh Coaster

One of the tools at the disposal of an engineer is Finite Element Analysis. In the process of this the item being investigated needs to be meshed into discreet parts, preferbly hexahedral. This design is a coaster based off the common…

Waveshare Raspberry Pi Compute Module Case Lid

3D printable Lid for the Waveshare POE adapter board I have a CM-10-POE-Box, however I lost the lid. Included are 2 designs: 1. Plain 2. Home Assistant Fusion 360 design file included for easy modification. The Home Assistant model…

Cycloneshock barrel spacer

Nerf Barrel Spacer made to go in the Cycloneshock barrel around 17/32 brass tube.

Držák filtrů Rainfresh DNF500-N5 a FC200-CF2

Držák filtrů na vodu (viz foto). Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.25 Infill: 80% Filament: PET-G, ASA, ABS... Category: Bathroom

Stackable Prusa LCD and Waveshare 5" display cover

Two separate covers for the origin Prusa MK3+ LCD and the Waveshare 5" LCD. Both covers can by stacked for easy storage. It can be printed easily and without support.

Door threshold screw cover

This has been bugging me for a while and I didn't want to mail order for caps that might not fit. A few minutes worth of modeling and now it's fixed. If it doesn't fit your screw holes then edit the Fusion 360 model and print another remix.

Modified Front: Weather Stand - 4.2" ePaper Waveshare Display - Lolin ESP32

Remix of the Case Cover to custom fit my desk shelf and provide some angle. 70 degree layed back orientation for better viewing, simply replaces the front of the OG design by Rafal Ko. (https://www.thingiverse.com/thing:5157668/files)

Verrou boîte à gâteaux Rotho Fresh

Verrou pour sécuriser la fermeture de la boîte à gâteaux de marque Rotho, modèle Fresh. Le verrou coulisse selon l'axe circulaire de la boîte.

Makeshift Scavenger Pipe Dreads

This was a humorous lil idea i had for the flash hair contest. Materials: ¾ in garden hose Superglue Fishing line Cutting tool The premise is pretty simple. Its fitted for ¾ in garden pipe but can be scaled up using the scale tool and…

Connectors for Lakeshore "Connective Furniture"

I built a custom section for a toddler wall at a child care center. I needed four of these connectors to attach my section into the wall. The first photo above shows one of my connectors test-fit to an original wall section. The last…

Meshmixer Bunny

A version of the meshmixer bunny that is split into 3 different parts, you can print it as normal and assemble it with super glue, or print the 3 parts in different colours, also a good test for lining things up when gluing them together.