4,797 models
Playing with Paid version of MeshyAI HighPoly Mesh Output + post Texturing. Verdict. Slightly better mesh but messy texturing (seams are not clean). Displacement seems to be less predictable. Probably just need to play with it a bit more.…
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
This case has 4 versions: Plain : No cutouts and no mesh Plain cutouts : This version also has no mesh but it has slits for GPIO and camera cables Mesh standard : A mesh is added in PrusaSlicer to the 3MF files. This only works when you…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
Now out! The HMS Hood that was sunk by the Bismarck! Get your model here: https://www.printables.com/model/776292-hms-hood (Printing and assembly instructions below) The German battleship Bismarck! Named after Otto von Bismarck and the…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Printing assembly instructions below! The HMS Hood, the first of the Admiral-class battlecruisers built in 1916 for the Emergency War Programme. Since then it has been a feared battleship and a proud jewel in the Royal Navy. Sunk by the…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
The SSUPD Meshlicious fan mount is inspired from chaosmage project. I have optimized the holder to be more stable and is not blocking any airflow. With this fan mount you could improve the VRM and mainboard cooling. Fits perfectly for…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
IO Shield blank for mATX/ATX. Printed in Jessie Black PLA on Prusa Mini+ Added modifier box to interior for grid infill 25% and zero top and bottom solid layers. After aligning the motherboard ports with the shield cut out corresponding…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Wife needed this as a planter so I hollowed it out.
Print approx. €5.79–€7.07 excl. taxPreliminary estimate for one variant
WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
Simple model of a microgreens planter with various extension like a stackable holder, lid, and sprouting tray. Everything was thoroughly print-optimized. The lid can optionally be separated in slicer and has a hole - for example, use the…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
it s the fastest to print currently ~~20m connecting element for simple peel off
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for PETGSource material: PET
Low poly model of an egg (only the wireframe) Print instructions Use a brim (About 5 - 10 mm) Can be printed without any support (possible that some oozing has to be removed) Print with 0.15mm layer height For better results use the Layer…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
New: Mesh 004 uploaded with zipper to extend ! This is my first idea fom an other work and i have declined in meshs you can integrate in yours makes. Stay tuned, bookmark this, i make upgrades everytimes when i have new ideas. A little…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Cases for Raspberry Pi 4B with POE Hat from Waveshare. PoE HAT B with OLED screen or C without the screen. Bottom and top cases snap together without the need of screws and/or nuts https://www.waveshare.com/poe-hat-b.htm…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
Monkey Skull Chalice. HOW TO VID.
Print approx. €14.90–€18.22 excl. taxPreliminary estimate for one variant
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
Al'kesh Bomber/Transport from Stargate SG-1 at 1:250 scale
Print approx. €13.66–€16.70 excl. taxPreliminary estimate for one variant
Part of the Classic Games Collection Just the standard Horseshoes game without the metal parts. Requires at least 4 Horseshoes and 1 pole to play. There are many rule sets, including "official" rules.....but the most basic I know is: 4…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Since many of you had problems with attaching the Shield to the face with rubber bands we proudly release our Remix for a Headband. It is tested by medical personal and has the big advantage of not giving you pressure points anymore,…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print without supports.
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
This model is a mesh that can be cut to any shape and is easy to print and can be used for practically anything. I intend this to be used for terrariums as a drainage layer. Print Requirements Layer height has to be 0.2mm No supports No…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
This box supports following components: Raspberry Pi 4B Waveshare 4.3" DSI display ( https://www.waveshare.com/wiki/4.3inch_DSI_LCD ) Noctua 40mm 5V fan - NF-A4x10 5V PWM 1-channel relay (unfortunately not exactly a typical one:…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
This are 25mm tall feet for the SSUPD Meshroom D. These are ~18mm taller than the original so your GPU can get more airflow for lower temperatures. Note: these do not fit the Meshroom S. Printed in PLA with a 0.6mm nozzle and 0.3mm layer…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Currently a lot of makers are printing faceshields as "Makers vs Virus". To cut the rounded edges easier, I have created a small helping tool. The tool can be adjusted via OpenSCAD. The 80mm diameter variant is attached. 80mm diameter…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This bracket is designed for the SSUPD Meshlicious, to provide a more comfortable access to the video output ports. We have optimized the bracket for ADT Link DisplayPort and HDMI cable. You could use the bracket with the following ADT…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
A headband made from 3 pieces. Two identical flex pieces to make the band and a size adjustor. Is reasonably comfortable. Could serve as a replacement for when elastic bands are out of stock. Could also be disinfected better. However the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
Print approx. €6.41–€7.84 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a longer and wider sidebox for my MK3S+, so I took dotson90 's excellent Mesh Sidebox and remixed it, albeit with only the left sidebox. However, you should be able to mirror this model to create a right sidebox as well. I made…
Print approx. €7.63–€9.33 excl. taxPreliminary estimate for PETGSource material: PET
Death Star Egg Cup - Testing out Meshy web site for generating 3d models for use with Blender displacement. Evaluation: LumaAI is better. Meshy offers more refinement and prompt options than LumaAI. But its going to cost you after your…
Print approx. €4.06–€4.97 excl. taxPreliminary estimate for one variant
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 20mmx20mmx0.2mm squares in a 4x4 grid with 2x200x0.2 lines connecting each grid element to provide whole…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Uma--Maheshvara (Ball-Gazing) The Iconography of Play: Decoding the “Circle Mudra” in Divine Lila The vast sculptural tradition of Hinduism is governed by mudra , the precise language of hand gestures that conveys divine attributes and…
Print approx. €21.66–€26.48 excl. taxPreliminary estimate for one variant
UPDATE New version 2.2 (more bleow) This print uses Voodoo magic and a 1mm nozzle to enhance print speed while still producing a good quality finish. This print uses Voodoo magic to enhance print speed while still producing a good quality…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
A comical, yet serious sign that is sure to fit in with any 3d printing setup. A 3mf file with color changes is provided, and NO MMU IS REQUIRED! Wanna use it for a different machine? (cnc, router, mill, lathe, etc…) Make your own remix…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
I released the first version of the Meshtastic router station in March 2024. Since then, I learned a lot, designed my own Meshtastic motherboard PCB, and completely changed my original design. The result is this second version. Why…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Loved the mesh sideboxes for the Prusa MK3 but could not find any for the Mk2.5. These Sideboxes clip onto the threaded rod of the Mk 2/2.5. Gcode is for PETG and has 2 stops for color change built in at the right points. Have also…
Print approx. €6.45–€7.88 excl. taxPreliminary estimate for PETGSource material: PET
Housing for mounting antenna and radio directly on pole. Print with PETG for that weather-resistant housing. Spray the inside of the enclosure and the insert with PRF 202 to make it waterproof. The inserts for Heltec and RAK are optimized…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
This 2-part case is designed for the Waveshare HDMI to CSI adapter card. This card is used to convert the video signal from an HDMI device to the CSI connector on a Raspberry Pi. It can be used to interface HDMI webcams (like a GoPro) to…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Again for modeling.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…
Print approx. €6.37–€7.79 excl. taxPreliminary estimate for PETGSource material: PET
This sign honors friendship. It was printed flat and does not need any support material. PETG was used with a 10% infill. The .3mf and .gcode files contain a color change for the words.
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
FISH CARP FRESHWATER COMMON KAPR RYBA
Print approx. €3.78–€4.62 excl. taxPreliminary estimate for one variant
Depth modified for official case. Can be used in pegboard, as car holder or to "plant" device. Sized for optional cover Official antenna https://www.thingiverse.com/thing:6792300 Big antenna…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
I designed this case for the 7" Waveshare touch screen for use in my Smarthome system. The following parts are required to complete the display: 1 pc. Touch Screen ( Link ) 1 pc. Rapsberry Pi (see above link for supported types) 8 pcs. M3…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for PETGSource material: PET
Jednoduchý obličejový štít. Po vytisknutí roztáhnout, vložit A4 fólii pro kroužkovou vazbu, nasadit gumičku. Žádné řezání ani děrování fólie. Navíc se dá fólie kdykoli lehce výškově posunout. Simple face shield. After printing, stretch,…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Hexagonal pattern design.
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Here is my version of the Cheshire eyepiece, in a 1.25" (31.75 mm) version. I split it in 4 parts, so i can 3D print all of them, in two colors. No glue needed. The crosshairs is replacable! this is so fragile, i wanted the eyepiece to be…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
Update June 21: The Faceshield turns out to be also sliceble with current versions of Cura when setting Z Seam Alignment to “User Specified”. Settings down below.…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for one variant
When it stops printing, just put there some window mesh, adjust it with magnets and continue printing.
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
Housing for mounting solar powered radio on pole. Print with PETG for that weather-resistant housing. Spray the inside of the enclosure and the insert with PRF 202 to make it waterproof. The prints are optimized to not require print…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Based on the design by made by HanochH ( https://www.thingiverse.com/thing:4233193 ) A ready to run stack of 4 faceshields. You can snap in an A4 or 8.5 x 11 transparent sheet and lock it in to place! No hole punch required!
Print approx. €6.67–€8.15 excl. taxPreliminary estimate for one variant
Divider wall designed to fit inside the IKEA JONAXEL slim mesh basket ( 904.199.65 , 25x51x15 cm). Small pins on the sides slot into the mesh openings, keeping the divider in place. Voronoi pattern design.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Bonjour à tous. Je vous partage un wall art avec le Chat du Cheshire de Alice aux pays des merveilles. Dessin trouvé sur le net. Pour la modélisation, j'ai fait avec Paint 3D pour retoucher l'image et séparer les différentes couleurs pour…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
Simple model buil with thinkercad. I tested with PLA and with a Creality Enver V3 se. I made 3 models for my 3 Mini PCs dreamquest at home. Any question, send me a email with the subject: “Mini-PC Dreamquest Fan” to [email protected]
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Stacked remix of the FabLab U. de Chile FaceShield . 4 stacked faceshields with 0.2mm separation between each one. Gcode for Ender3 printers and STL files. Print instructions Optimized for 0.4mm nozzle.
Print approx. €6.82–€8.34 excl. taxPreliminary estimate for one variant
This is one of a total of four fresh keeping boxes for leftover vegetables: Garlic You can find the other three (Tomato, Lemon, Onion) here . Printing information Layer height: 0.20mm Infill: Support Cubic 20% Support: none If necessary,…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Introducing a practical solution for storing your drinks in your Tesla Model Y. This 3D printed insert fits perfectly in this under-seat storage box from Temu (https://share.temu.com/BY8kgFcX30A), holding up to six cans securely. Whether…
Print approx. €8.23–€10.06 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE There is a new version: https://www.prusaprinters.org/prints/29052-1mm-voodoo-faceshield-v34 This print uses Voodoo magic and a 1mm nozzle to enhance print speed while still producing a good quality finish. ATTENTION!!! These files…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
The variants have different minimum base thickness. The example variants: a single 0.2mm layer at minimum, for the most gradual overhang behavior on the underside 7mm for a heavier base and much more intense overhang situation solid for…
Print approx. €5.84–€7.14 excl. taxPreliminary estimate for one variant
Bolero fresh bag holder, stackable, 2 drawers, 1 cabinet for 72 bags
Print approx. €16.53–€20.20 excl. taxPreliminary estimate for one variant
Framework 16 with dGPU ONLY - It works great. I have been using this printed and so far - it's great!!! I recommend printing in PETG with at least four perimeters and 0.2mm layer height. It does need some supports. The holes should each…
Print approx. €15.31–€18.71 excl. taxPreliminary estimate for PETGSource material: PET
Loved Mesh Side Boxes in Prusa Enclosure with MK3/4's and wanted the same esthetics and similar functionality for the CORE One. Remix is of 3mm flat bottom variant of Purge bin as that matches the closest to the Mesh boxes, which means…
Print approx. €2.40–€2.94 excl. taxPreliminary estimate for PETGSource material: PET
My wife wanted a multicolor Cheshire Cat as fridge magnet for a birthday present for a friend of her's and I came across the awesome model from @Tims_3d_world which was the perfect base for what I needed. Tim was kind enough to change the…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Some health professionals, such as dentists, use a magnifying glass in some procedures. This model is compatible with some magnifying models on the market. Print instructions Doens`t need supports. You can print with 0.6 ou 0.8 mm noozle…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
PETG
Print approx. €4.74–€5.79 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement panel for the front of the meshify 2. This allows fans to be mounted directly behind it with the radiator inside the case. Designed with 120 x 25mm fans. I happen to have ek vardar fans with non standard mounts,…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant
An accessory for the espresso knock-box by @thenickdude . Prevents mould from growing inside the container. Print with 100% infill. Like it? Send me a coffee! ☕
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
You can resize this model in FreeCAD or PrusaSlicer. Put a piece of insect mesh between two frames and glue them together. The tiny holes are suitable for nails.
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
I carried out a concrete pour recently for which I was reinforcing with A193 mesh. I forgot to order risers to hold the mesh so quickly designed and printed a number of these to suspend the mesh at around the 55mm mark. Support has…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Cover for Waveshare 4,3" DSI Display(such as this one) and mount for Articulating Raspberry Pi camera mount system. Cover is bends into place with live hinges(sides first, top and bottom to lock it into place, M2,5 screws to secure it)…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Hi everybody, I make this new pusher for my Moulinex easy fresh grater. I broke the original, too fragile! I redesign more stronger and in one volume, to give in easy to wash. Print with PETG filament. Have a good print ☺
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for PETGSource material: PET
FISH FRESHWATER COMMON RYBA
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 16mmx16mmx0.16mm squares in a 4x4 grid with 1.6x160x0.16 lines connecting each grid element to provide…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
If you want / need use CM4 with PCIe TO M.2 Adapter Pi Compute Module 4 (WaveShare WS-19091) in WaveShare WS-19195 box - you will find that you cannot close original box. This was reason that I created new higher upper part replacement…
Print approx. €4.54–€5.55 excl. taxPreliminary estimate for PETGSource material: PET
I purchased a Meshtastic starter kit for a RAK19007 WisBlock (and RAK4631) with a 12x40x65mm battery, only to not be able to find a case that fit that battery. This is my solution. This case features thin spots over the LEDs so you can…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Ther are a lot of GoPro Mounts that can be used, also for Flashlights or LED. https://www.prusaprinters.org/prints/11407-handle-bar-flashlight-gopro-bracket-318-mm Included with the design is the Prusa RC3 Faceshield for dentists. Print…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
battle spaceship space rocket galactic bitevni vesmirna lod vesmir raketa
Print approx. €11.28–€13.78 excl. taxPreliminary estimate for one variant
This model allows you to mount a Turtlebot3 waffle plate on your WaveShare Jetbot robot. This then allows for the mounting of additional sensors includeing lidar, imus etc. Designed to print without the need for support. Source:…
Print approx. €5.60–€6.84 excl. taxPreliminary estimate for one variant
This model is not really flexible because of the frame. After few layers stop printing and put there material of your choice. Adjust it with strong magnets far away printed motive because of printing head. Than continue with printing. Be…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
BATTLE SPACESHIP SPACE ROCKET GALACTIC BITEVNI VESMIRNA LOD VESMIR RAKETA
Print approx. €9.65–€11.79 excl. taxPreliminary estimate for one variant
pdated version of the RPi Zero Frame to protect the Waveshare Ethernet/USB Hub pHat for Webcam usage with PrusaLink.
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
For those who use the Febreze 3volution plug-in air freshener on minimal setting and still are negatively overwhelmed by the shear amount of fragrance it releases: the reduction cover for low-key ambient scent in your rooms. Reduce the…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Lešij - Slavic forest demon, guardian of the forest (three colours) - 20 cm Wall art, matrix for graphics and frottage
Print approx. €4.57–€5.58 excl. taxPreliminary estimate for one variant
One of the tools at the disposal of an engineer is Finite Element Analysis. In the process of this the item being investigated needs to be meshed into discreet parts, preferbly hexahedral. This design is a coaster based off the common…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
3D printable Lid for the Waveshare POE adapter board I have a CM-10-POE-Box, however I lost the lid. Included are 2 designs: 1. Plain 2. Home Assistant Fusion 360 design file included for easy modification. The Home Assistant model…
Print approx. €2.51–€3.06 excl. taxPreliminary estimate for one variant
Some Hotels have special clotheshangers without a proper hook. This is an adapter to be able to use the clotheshanger outside its cabinet. I use this to dry clothes in the bathroom of the hotel room. The current size is untested The…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Nerf Barrel Spacer made to go in the Cycloneshock barrel around 17/32 brass tube.
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Držák filtrů na vodu (viz foto). Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.25 Infill: 80% Filament: PET-G, ASA, ABS... Category: Bathroom
Print approx. €9.90–€12.10 excl. taxPreliminary estimate for PETGSource material: PET
Two separate covers for the origin Prusa MK3+ LCD and the Waveshare 5" LCD. Both covers can by stacked for easy storage. It can be printed easily and without support.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
This has been bugging me for a while and I didn't want to mail order for caps that might not fit. A few minutes worth of modeling and now it's fixed. If it doesn't fit your screw holes then edit the Fusion 360 model and print another remix.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Remix of the Case Cover to custom fit my desk shelf and provide some angle. 70 degree layed back orientation for better viewing, simply replaces the front of the OG design by Rafal Ko. (https://www.thingiverse.com/thing:5157668/files)
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
