Liczymy pasujące modele…
The idea is simple - just print the 2 parts. The first insert screws into a 20 mm hole that you drill into the top of the empty container. I would recommend to glue it in with some super glue or 5 minute epoxy to secure and seal the fit.…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This collection of 3D models is designed as an example for teaching mathematics, helping to make the concept of integrals easier to understand. The models show the area under a curve, Riemann sums with different rectangle widths, and…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
Das Model testet den Einsatz von Input Shaping Damit ich eine schwarze Magnet-Werkzeugleiste in der Küche verwenden kann, habe ich eine foliendünne weisse Hülle gedruckt, mit der ich die Leiste verkleidet habe. Sie dient jetzt als Messer-…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples series on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples]…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This set…
A simple print in place linear gear example
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
2-sided thread printable and works! (Flip the model on the right side before printing!)
This is connected with me being the new owner of a Bambu Labs A1 combo. Specifically, this adapter will shrink the hole in the centre of your Anycubic filament spool so that it works with the Bambu Labs AMS system. Also it has a super…
Label holder for interchangeable labels/signs of crates. Halterung für austauschbare Beschriftungen/Schilder von Kisten oder anderen Behältnissen.
It could be G-Class Fog light cover if I only knew dimensions.
Hold multiple similar objects that require custom spacing in x and y on a Skadis pegboard. I used this to make the attached walkie-talkie holders (Retevis models RT24, RT79, RT618) as they require room for clips and other parts that stick…
Take your production to the next level with this Hat Clip Engraving Jig , designed for precise and repeatable alignment on both fiber and CO₂ laser machines. ✅ This alignment fixture includes a 6.5mm rail to ensure consistent placement…
Set up the following way (back to front): 1 mm insert for thin PCB (Nooelec UWB antenna) 6x square holes for cheap Ali/Amazon probes 2 mm insert for normal thickness PCB (1.54 mm): H-Tool SL-10 mini LogPer antenne 2x mount for VHF and UHF…
2-sided thread printable and works! (Flip the model on the right side before printing!)
This example uses a groove and a hole each replicated with a polar pattern to create some kind of locking mechanism in FreeCAD. The discussion can be found over on Mastodon . If you like this design, please consider leaving a ♥heart.…
As it will help increase the models' exposure. (Thank you) I used Makerworld's parametric part creator to make these for another project. The SLT file can be found here . Here is the link to the holder in the main picture:…
I created this spacer to align my Regalux shelves. Spacer can be placed on top of each shelf, between them, to allow a regular alignmenmt. I printed in PETG, with supports.
Example use of my Flex Leg model Add legs to any model in the slicer or CAD software. This example was created in PrusaSlicer See: https://www.printables.com/model/1664100-flexi-leg
Set of desk numbers for exams (1–30). Designed for real classroom use: - Stable rectangular base (30 mm depth) - Numbers 1 and 7 have wider bases for better stability - Height ~75 mm - Easy to read from a distance - No supports required…
I designed a drink bottle holder for my kids so that the bottle is always close by. The holder is simply attached to the bet and Suitable for boards up to 23mm thick. The board should not be too thin, as the grip will not be optimal. To…
The "Colour example card" is a 3D printable model designed to help showcase and compare different colors. It can be used to test various filament or paint colors, allowing you to see how they appear on a printed surface in real life. This…
If you have people who want to learn more about Additive manufacturing you can use this modal to help them learn how it works. PRINT WITH TREE/ORGANIC SUPPORTS!!! This will make support removal much easier.
A side-by-side comparison of the low poly version of a model that you can download from Models-Resource and the resulting model after Displacement Magic in Blender and some basic sculpting. Video Coming Soon. Very similar to. FYI you can…
First of all: It doesn't seem that way in the pictures, but the camera is in perfect position! xD A simple design of an iPhone 8 Case. Made from scratch by myself (with the help of the dimensional drawing from Apple). You can customize it…
Cookie Cutter Generator using OpenSCAD How to use your own design: Create a new SVG file in Inkscape. Draw out paths for the features on their respective layers. An example on how this is done can be found in the attached Pig.svg Open the…
An exercise in minimum effort for maximum effect. This method just needs two color swaps and a 0.2mm tall (thinner if you dare) modifier slab that removes just the first bottom layer of the print, leaving only the infill and the…
Custom Frame & Photo Generator Description: Create unique and customizable photo frames with this generator! This project provides STL files for the first two sizes in the photo_sizes list, along with versatile SCAD code and SVG…
Shelf for home server series Qotom Q203* in New design (for example Qotom Q20331G9). ! Check your stand carefully before printing - tray width 228mm! For wide stands! I just received a new Qotom Q20331G9 server for my home lab. The width…
i needed a new holder for my controler, but unfortunly i couldnt find one that fits on printables (i searched like 1 minute) and then i designt one for my self 20% infill tree support when laydown its not so smooth, but its a print time…
Bill of materials for a 16-bottle holder: Part Function and Printing suggestion Number VaseModeHexBottleStand_Body Main body of bottle holder Suggest print at Vase mode, 0.2 mm layer height 16 VaseModeHexbottleStand _SupportFull Part to…
Example build for building vertical color rack
Hello, this model is an example print of the 3-axis joint - “Sampo-gumi-shikuchi” Bambu A1 Mini, 0.6mm Nozzle, PLA+, 0.3mm height, with supports You can see how it goes together from this website:…
**Description Language:** DE, ENG, FR, CZ **Configurable:** YES **CAD Program: FreeCAD** # DE Hierbei handelt es sich um ein BEISPIELPROJEKT um trennbare Scharniere eines Deckels zu zeigen. In diesem Fall kann das Kästchen und der Deckel…
Parametric Funnel - Create pretty much any funnel size by changing a few parameters in Fusion 360. New to Fusion 360 or design software? Give it a go! This is easy and fun! And Fusion 360 is FREE for personal use. Example(s) attached.…
Make your 3D print projects great again - Here is a collection of common screwless joints you can use in your project. Feel free to edit these on my Tinkercad . PRINT SETTTINGS 0.2~0.24mm layer height 0.4mm layer width Supports required…
Are you struggling to respond to social interactions? Customize your social dice and let it do the work for you. This model was used to teach how to use the “PrusaSlicer Embossed Text” tool in this tutorial: Personalizar modelos en…
I commented on this Youtube video (https://youtu.be/lcI8Kw39ADk?si=V1Sab3AD5HP00Tb5) about using this type of hardware for a joint like this. The familiar indexing “click” sound is found in many different products. This is just one way to…
I commented on this Youtube video: The type of joint he was making was a Hirth Joint. This is an example of a Hirth joint that incorporates a button release.
Label holder for interchangeable labels/signs of crates. Halterung für austauschbare Beschriftungen/Schilder von Kisten oder anderen Behältnissen.
IT3 Industries is my DBA hint the tag on the model DISCLAIMER: This project is one of hopefully many to showcase some of the technology regarding injection molding. Starting with this independent mold, the back plate is windowed in a way…
See: https://www.reddit.com/r/Fusion360/comments/1jx7jvf/how_are_these_vent_holes_being_made/ How to model these vent channels UPDATE: Better solution with one sweep per channel at the price of a 3D sketch
Someone asked for an example project with multi-everything and I obliged. https://forum.prusa3d.com/forum/original-prusa-xl-tool-changer-how-do-i-print-this-printing-help/use-case-study-multi-diameter-and-material-print/ Extruder 1: Pla…
We have made this mini example of column styles/types for the classroom setting. All of the parts print separately including the topper for the ornate Corinthian column. If it gives any difficulty in printing you can slightly size it up…
Illustrating how to include a belt clip without relying on layer adhesion, as per this thread. Holds 8x 6.5mm diam arrows. - print auto-orientated, no supports required.
Just a little remix of Aeonfly's iPhoneX Case (https://www.prusaprinters.org/prints/47675-iphone-xxs-hullecase). This version allows you to design your own custom back plate. Since my starting point was an STL-file there may be a few…
Answer to question on reddit: https://www.reddit.com/r/Fusion360/comments/1kndg5y/emboss_on_to_a_curved_face/
Planetary Gear Example (30 ring, 4x10 planets, 10 sun) with crank, holder and gear to show rotation, graphite recommended as lubricant, 6 m2 length 4mm screws required to close gearbox
I always care to design thinking the best way to possibly omit the need of support in printing, so I got use to elaborate in mind also the slicing before to even run the slicer program. I draw this basket type of box initially even with a…
We have made this mini example of arch styles/types for the classroom setting. Support free and prints in one piece and the defined base gives you an option to do a filament swap to get a multicolor print without an AMS/MMU. Filament…
Somewhere to put your spray bottle for cleaning the build plate
It could be G-Class Fog light cover if I only knew dimensions.
I'll try out some things. Will be filled time by time. For example: Module-Parts fit together with a variable Spacer. Ever user this for the first two lines: $fn_preview = 24; // Vorschauqualität (F5) $fn_render = 80; // Renderqualität…
This is a compound of a cuboctahedron and a rhombic dodecahedron, modeled in CAD as the base shape for a new fractal series I'm releasing . I’ve included the 3MF file for the exact print shown in the photos. That one was printed on a…
I printed a bird feeder with a PET bottle, but there was a problem pouring grain into it. A standard funnel with a small
How to create a radial fillet in an obtuse way using surface lofts and other crazy moves. See: https://www.reddit.com/r/Onshape/comments/1ljqe7w/how_can_i_fillet_these_raised_edges_in_a_circle/
Educators teaching in the sometimes abstract world of 3D modeling may find these physical models helpful! In the exercises found in Motion implied through modeling at newMediaWiki , our students learn that “extrusions are shapes moving…
An example card with only the front of the card, with the sample VISA number 4111.
Printable 3D-Floorplan Example w/ Conversion & furniture Note: Scale is 1:100. And details of windows,etc. are depending on the nozzle-diameter.
The Czech Republic plates with numbers 1-25. Used for graduation from geography. It has the shape of the Czech Republic. Print instructions You can use colorchange.
We had a discussion if it was possible to print working M6 threads on FDM printers. We have established that it is generally possible, and I have produced a working example with a 0.4 mm nozzle and a layer height of 0.12 mm. The provided…
44- hisoka 99- Killua 301- Illumi 403- Leorio 404- Kurapika 405- Gon
A simple print in place hinge made with cones instead of a hole in one and an axle in the other.
Example model from www.gerridaj.com You can play with model settings on gerriaj.com alter the its appearance and export the new mesh. The pictures show an example of custom G-Code generation from the model.
Project box intended for customisation. I've included a joystick / button box lid which I created this for as an example. Add your own cutouts / slot for usb cable or whatever interface. Added additional box bottom with a cutout for an…
Project box intended for customisation. I've included a joystick / button box lid which I created this for as an example. Add your own cutouts / slot for usb cable or whatever interface. Added additional box bottom with a cutout for an…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This set…
Hold multiple similar objects that require custom spacing in x and y on a Skadis pegboard. I used this to make the attached walkie-talkie holders (Retevis models RT24, RT79, RT618) as they require room for clips and other parts that stick…
This is HexaMESH! The perfect print when you don't have much filament, and almost impossible to fail the print. this is the most realistic, fidgety, durable Mesh You Can FIND! IMPORTANT: Use the .OBJ File if your slicer separates models…
Simple 5 Bladed Iris for testing Iris designs and tight fitting covers. I was interested in learning some basics in creating tight fitting enclosures and mechanical iris's. I'm including the mf3 file and the f3d file (Autodesk Fusion 360)…
i ewanted to make a pumpkin tealight as i had a bunch oif led tealights left over... so i bought and scanned a pumpkin
Uploading the example as I have simply seen too many claims that "plastic bushings do not work", when using unsuited designs. This is one bit of folklore with with which I do not agree. You have to use a design appropriate to the task,…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This set…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] This set…
While this print was made for a pretty limited purpose, I thought some of the design considerations involved in making it might be instructive when considering the design and printing of “missing parts.” This handle insert fits my…
This is an example file for multicolor printing. It was designed with reliable mass production in mind. 0.4mm nozzle recommended. The colors used are Hatchbox 'Black', Voxelab 'Purple', Hatchbox 'Purple', Hatchbox 'Orange', and Hatchbox…
Take your production to the next level with this Hat Clip Engraving Jig , designed for precise and repeatable alignment on both fiber and CO₂ laser machines. ✅ This alignment fixture includes a 6.5mm rail to ensure consistent placement…
Set up the following way (back to front): 1 mm insert for thin PCB (Nooelec UWB antenna) 6x square holes for cheap Ali/Amazon probes 2 mm insert for normal thickness PCB (1.54 mm): H-Tool SL-10 mini LogPer antenne 2x mount for VHF and UHF…
You can generate your own: https://michalmietlinski.github.io/braille-label-generator/ or use my repo https://github.com/michalmietlinski/braille-label-generator A generator for braille tactile labels you can 3D print: a rectangular plate…
This example uses a groove and a hole each replicated with a polar pattern to create some kind of locking mechanism in FreeCAD. The discussion can be found over on Mastodon . If you like this design, please consider leaving a ♥heart.…
As it will help increase the models' exposure. (Thank you) I used Makerworld's parametric part creator to make these for another project. The SLT file can be found here . Here is the link to the holder in the main picture:…
SCH 1.25 Inch 6 Cylinder Merge Collector Example. SUPPORT: YES.
A Redditor asked to see the supports that I used for this model. This is a fairly large STL, so I figured that I'd upload it as a remix instead of baking it directly into the main thing. I designed these supports for a 0.05 mm print with…
I created this spacer to align my Regalux shelves. Spacer can be placed on top of each shelf, between them, to allow a regular alignmenmt. I printed in PETG, with supports.
Example use of my Flex Leg model Add legs to any model in the slicer or CAD software. This example was created in PrusaSlicer See: https://www.printables.com/model/1664100-flexi-leg
For 4 beds max. Max bed length 315-320 mm. I use for Qidi Plus 4. Holder - printed with PLA, infill 20% honeycomb, 2 walls and works well. Rotate 45 angle. Around 145g per item, 3h30 min to print. Top corners - printed with PLA, infill 8%…
Set of desk numbers for exams (1–30). Designed for real classroom use: - Stable rectangular base (30 mm depth) - Numbers 1 and 7 have wider bases for better stability - Height ~75 mm - Easy to read from a distance - No supports required…
Nozzle and Nozzle cap for System Reiner cartridges, which for example is used by the Fuchs Lagermeister BF2 cartridges, which is great for lubricating linear rails. The fit is not perfect but it screws on fully and seals well.
This is an example Mitral Valve Scaffold for educational purposes. This one-way valve sits between the atria and the ventricles in the heart. I've included two versions with differing tolerances for printing, where Valve 2 is more…
