Liczymy pasujące modele…
Remixed from nilson84 Reinforced every part to reduce sagging in the heat. Taller hook to prevent hat from falling off over bumps. Much stronger design Please donate if you like the design Category: Vehicles
Can be customized to accommodate any panel connectors. I will be using for a USB-C and an HDMI port in a 2012 F150 with a Sony XAV-AX8500 head unit.
Overview This was one of my very first chase light designs for the 1997–2003 F-150. Since posting it, I’ve built a lot of different versions, and the one on my truck today looks very different. I’m leaving this older model up in case…
Remixed from nilson84 Reinforced every part to reduce sagging in the heat. Taller hook to prevent hat from falling off over bumps. Much stronger design Please donate if you like the design Category: Vehicles
this is a button if you broke or lost your volume button
Some valve caps for vehicles, I made these with 0,2mm nozzle. This far: tesla, f150, bmw, toyota, yamaha, gasgas, will add more later.
This is a mount to house a USB-C and HDMI adapter instead of the Aux and USB-A that comes stock. I designed this to fit the USB-C cord that came with the Sony XAV-AX6000 Head unit. I used this HDMI cord from amazon:…
Ever need to fit a larger cup (RTIC) or water bottle (Owala) in your console cup holder and just end up frustrated? Pull out those narrow inserts and replace with one of these. I have not tried TPU yet, but I don't see why this design…
A few years ago I upgraded the radio in my 2005 F150 Lariat 2WD to support Android Auto. While I had the dash apart, I removed the factory 12V cigarette outlet, located under the radio in the center stack and replaced it with a dual USB…
this is a pretty bad model if im being honest, one of my first blender designs ever, so its not perfect by any means.
This is a switch panel that will fit in the slim storage area between the cup holders and shifter for a 2021-2024 Ford F150. The base is wider to cover the entire center section to make it look for "factory". I printed the base separate…
Alternate bracket for 13th? gen F150 backup camera so it faces backwards when the tailgate is down. Requires no extra hardware. I printed in PETG with 0.8mm nozzle
Wanted a phone holder for my 1987 F150 without doing any permanent modifications to my dash or clipping it to the fragile 40 yr old vents so i made this adapter that slips into the coin holder/cubby slot behind the steering wheel and…
I got annoyed with my floor mats slipping around the vinyl liner on my 2022 F150. Ford suggests using W715120-SS3JA clips but they didn't secure well for me. I designed a threaded oversized clip so that they lock in place securely. The…
Lowe HF150 LCD Backlight Diffuser This is a diffuser for illuminating the LCD on a Lowe HF-150 receiver. There is space for 2x3mm LEDs, one each end. I used two green LEDs in series with a dropper resistor powered the VBAT line. I printed…
My tailgate bumper on my 2019 F150 kept falling out. I bought another one but the same thing happened so I printed a new pin that is a little longer and holds the bumper in place. This piece is pretty small and the outside piece should…
I printed this for my 2016 Ford F150 to hang my hats. I'm sure this would fit a lot of other Fords and other vehicles, but I've only tried it on my truck. Printed with PETG, not for strength but to withstand the hot summer heat in SoCal.
I think the orientation for printing should be obvious. I used the X1-C with AMS, and three colors of PTEG. Once the two parts are made (about 10 hours), measured and glued with J-B Kwik. I then re-enforce with JB Weld. It's been in the…
The McDonnell Douglas F-15 Eagle is an American twin-engine, all-weather fighter aircraft designed by McDonnell Douglas (now part of Boeing). Following reviews of proposals, the United States Air Force (USAF) selected McDonnell Douglas's…
Ford F150 Lightning Center Console Cushion Badge/Emblem. Fits 22 and up Platinum Cushions. It is meant to replace the Platinum Badge.
IIIF150 B2 ULTRA mobile phone case No supports, no raft, print with TPU or TPE.
My F150 XLT did not come with a wireless charger from the factory, and it also has that massive chasm in the console under the infotainment center. I designed this to sit on the little ledge around that pocket and hold a universal…
Used to hold grocery bags/etc on the passenger side of a F-150
These are bumpers to stop the lid on the center console of a 2017 F150 banging when closing, and rattling when closed. No idea how they disappear but seems to be very common that they do Two versions Loose - Looser fit than the tight one…
Easy to print in any material. I printed it in PLA 0.40mm draft mode with a 0.6 nozzle. Dimensions: 125 x 5.9 x 7mm
Made to fit KG-1000G+ remote radio head. No glue or screws required. Base allows for 30deg or 45 deg and does not obstruct beverage holders. Printed using Overture TPU with 3-4 walls and 30% gyroid infill. Pair with my mic holder for a…
After printing on my ender 3 there was minimal post-processing needed to get it to fit in the keyhole. A little bit of sandpaper and some wiggling does the trick. You can either carve your keys profile into the blank or modify the .stl…
Created a new knob with a 180 degree different orientation of the flat on the hole. It also is 1.125" in diameter and 1" deep. I used the skull from Panzer Design for the front of mine.
UPDATE: Added a second model that has been tested to work with the iPhone 17 Pro (not max) down to the iPhone 13. My F150 Lightning trim did not come with a wireless charger, so I modeled a fix that utilizes the pen holder between the…
Printed for an F150 to adapt the cupholder to fit a Yeti mug. Printed out of PLA however, I recommend either PETG or ABS Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** Doesn't Matter Supports: Yes **Resolution:**…
f150 center console latch. this is a minimalist design to replace the broken latch in the center console. if you found the spring (yes, one) reuse it or you will need an alternative. Print Settings Printer Brand: MakerBot Printer:…
Passgenau für einen Leinen F150. Passt aber sicher auf viele Schraubstöcke mit 150mm Backenbreite. Rückseitig können Magnete (10x2mm) eingesetzt werden. Innere Länge: 151.5 mm Innere Breite: 19 mm Innere Höhe: 30mm Äussere Länge: 155.5 mm…
Passgenau für einen Leinen F150. Passt aber sicher auf viele Schraubstöcke mit 150mm Backenbreite. Rückseitig können Magnete (10x2mm) eingesetzt werden. Das Prisma hat eine Tiefe von 2mm, sodass Rundmaterial ab einen Durchmesser von 4mm…
Passgenau für einen Leinen F150. Passt aber sicher auf viele Schraubstöcke mit 150mm Backenbreite. Rückseitig können Magnete (10x2mm) eingesetzt werden. Innere Länge: 151.5 mm Innere Breite: 19 mm Innere Höhe: 30mm Äussere Länge: 155.5 mm…
ssogaard 's Oil funnel remixed for 2011-2014 F150 5.0. Funnel is keyed to match oil cap.
Some valve caps for vehicles, I made these with 0,2mm nozzle. This far: tesla, f150, bmw, toyota, yamaha, gasgas, will add more later.
Wanted a 3D printed phone mount that would fit in the unused coin slot in the dash on my 2014 F150 Lightning. Something that would lock into place easily so it wouldn't pop out, and would be compatible with the standard AMPS hole pattern.…
I printed this out of PLA and when I checked after a drive it became super flimsy. Don't use PLA. I printed it in PETG in October of 2024 and I'm still driving on that sucker (Feb 2025). Fits nice. I was fortunate enough to recover the…
WHAT IT IS: A very specific tool for holding the YETI Cup Cap as well as the charging cradle for the Samsung Gear S3. I use this on my commute to work to drink my coffee and charge my watch. This keeps them in perfect position. There is a…
58mm Dosing Funnel for Breville Barista Max (VCF126X) and Max+ (VCF152X) Espresso Machines. Print upside down without supports. Two versions, choose yours: 0.6 nozzle, 0.4 layer height, 0.6 layer width TESTED 0.4 nozzle, 0.2 layer height,…
It's much more sturdy than it looks. PotatoGambit did a fine job on this mount.
The glue in my model was weak, and I missed one side. I created a new one that fits perfectly without glue, and I printed it with Flex A95.
This model was originally found on Thingiverse by a maker named Vizionfilm. I originally modified this model in Tinkercad back in 2020 to accommodate my needs in my truck. The model was shortened to allow access to the 8" screen radio in…
Hi there! Let me introduce you to the Ford F150 Raptor , a carefully crafted 3D model designed for those who appreciate detail and quality in their projects. Perfect for uses such as visualization, 3D printing, animation, or simply as…
This extension tube goes under the front seat of an F-150, F-250, F-350, or Ford Expedition. This extends the vent further to the rear seat for better airflow.
This fits perfectly on my 2011 F250 as well as the 2024 F150 bed posts. After a 500+ mile trip they have stayed in with .4 layer height 50% infill
A replacement cover plug for the spare tire release crank tool access hole for the Ford F150. This hole is located in the rear bumper near the license plate. Original cover plug is locking. This plug is designed with retainer tabs that…
My 32oz water bottle would not fit in the standard holders. When I removed them the bottle flopped around while driving. Now it sits snug and strait. The STEP file is included if you need to adjust the sketch to accommodate larger or…
These are bumpers for a 2015 F150 center console lid. May fit other years, such as 2016, 2017, could also go up to 2020. I'm not 100% sure. Made to replace the ones that fall out. Must print out of TPU. I used 5% rectilinear infill
I created this louver because the air vent on my truck broke several years ago. I am new to 3D printing so it was really a test of what I could create. I have uploaded 3 variations of this model. One is blank, one has F150 on it and the…
I have an 85 F150 that still has years of life left in it. Unfortunately, its plastic parts do not and have started falling apart. 3D printing to the rescue! A few minutes in design, a bit more in printing and we're back! Originally…
Pimp my box truck lol. Designed to adapt this super slick 10.1" android head unit with dual knobs to the old ford hole. Get a factory quality infotainment retrofit on a budget. This dash and radio commonly found on many motorhomes, work…
Small clip to hang walkie talkie out of the small cubby hole to the right of the radio in a 2013 f150. UNTESTED Category: Parts
A cover for the frunk emergency release button modeled on the 2023 stock cover. and based on the design by @mattkay This will fit trucks that did not ship with a cover. (2022/2023, maybe some later trucks?) it should snap right onto the…
This is an intake adapter for all 2015-2020 Ford F150's that are outfitted with the 2.7 Ecoboost platform. This is intended to allow the end user to have a non permanent air filter mod, which allows you to hear more turbo noise.…
I printed it with the flat part down. It went well with petg and my neighbor is happy with it.
This is my first creation, and works flawlessly for 3 rocker switches in an f150 between the shifter and cup holders, it takes place of the pen holder. I will redo the design and update after, until then, I just used a dremel to cut the…
Add a round tip to assist in holding the bag better.
This is a replacement for the sync module that has a usb and aux input for a 2009-2014 f150. Using this part along with this USB cord ( https://amzn.to/2upzINH ) you can replace the original for using an aftermarket stereo. This is also…
UPDATED: 10-11-25 Updated the design to utilize a 3d printed pin to secure the bracket. I noticed the brackets move vertically from when the truck goes over bumps. The added hole and pin should secure the bracket on the Uni Strut rail.…
I wanted to find a grommet that could try to keep the d-ring oriented the same way making it a little quicker/easier to hook the safety chains. All I had on-hand was red 95a TPU-AMS which is pretty stiff. I believe this could be printed…
The Visor Gap Flap blocks the gap to the left of the driver's side visor on F150 Lightnings which should fit Gen 14 F-150's as well. It slides on and has a snug fit to stay in place. Print with TPU with 100% infill, concentric fill. Also…
I'm a big fan of this generation of raptor so i made a keychain similar to my hot wheels keychain of a Porsche 911 Carrera. i may upload a version without mirrors as these break off in your pocket.
This is a phone mount for an F150. It fits in the space in front of the console shifter. This is designed to fit the ESR Cryoboost Qi2 Phone Charger. It will also physically block the button to stow the shifter. This was remixed from a…
I wanted to give out these to other Raptor owners I see on the road, or off of it. I had made a Gen 2 raptor keychain as well on my profile. this needs supports unless you are a wizard at overhangs.
An Apple Magsafe mount for the front storage area on the 14th gen F150's (2021+). It's designed so the charger puck will press fit into it and not require any glue. This should work with any magnetic charger that is the same dimensions as…
This is a mount to house a USB-C and HDMI adapter instead of the Aux and USB-A that comes stock. I designed this to fit the USB-C cord that came with the Sony XAV-AX6000 Head unit. I used this HDMI cord from amazon:…
Remix of @DougDimmadome_553971 model to fit Yeti Cup Cap for Coffee on commute
makes the eco boost have turbo flutter ( stustustu) print and use grey piece from original hose , clicks right on
Print Main Body with supports with standard 30 degree threshold angle (Tree supports work best) holes on the back are for M3 bolts and will self thread if you choose to put the rear supports on
The only 2 things I had on my key ring were my truck key and an airtag. I got tired of carrying them around separately so designed this to keep things more minimal. I also included a back that does not have a spot for an airtag if your…
So I got some coolers that are electric to take food to and from my property. These coolers work off 110 or 12v. I didn't get the option to have cigarette lighter outlets in my bed or a 110 plug. I have been using the Ryobi inverter, and…
added the wheels to be where they need to be so it prints in one spot without any assembly. i print mine depending on how my loop is oriented to have best strength. will be posting the ornament version soon. love this truck. hopefully…
A low profile magsafe phone mount. Step in the truck, throw the phone on the dash! Connects and charges automatically. Printed with ASA. Standard settings. I placed a foam sticky piece of tape on the back inside to keep it snug and rattle…
This is a tool for removing/installing center blend door actuator in 2009-2014 Ford F150 (and others). In this application, the rear screw can't be accessed from the center console, due to a frame member which is directly above the…
2025 (Maybe others) MagSafe Phone Holder for center console
Very basic box. Made in OpenSCAD. This is actually a cover for a fuse box. It fits the original box just right. I did not make clips or connectors, we just used some tape. I plan to make a version with matching connectors. 2001 f150…
***Note: I'm redesigning this mount to push the center of gravity forward. Mounts to third brake light with no modifications to vehicle. Uses existing screws and holes. Recessed slots for fasteners. Does not interfere with brake light…
Center console phone cradle w/usb cable pass-through. Slide it into the track of the retractable door. The door holds it securely. If you like the design, please consider a tip: https://www.paypal.com/paypalme/thisrudager Print Settings…
Uses M5 nuts and bolts. For parts and pieces: https://www.thingiverse.com/thing:2194278 Single mount and Double mount versions. If you like the design, please consider a tip: https://www.paypal.com/paypalme/thisrudager Tablet holder using…
F150 Center Console Organizer Tray 2017, 2018, 2019, 2020 Ford F-150 clip-on organizer. Clips onto the hanging folder rail. Room for: Sunglasses Pens Anything! Console illumination light pass-through design! Allows multiple hanging…
F150 Center Console Organizer Tray 2017, 2018, 2019, 2020 Ford F-150 clip-on organizer. Clips onto the hanging folder rail. Room for: Cellphone holder x 2 Wallet holder Business card slots Pencil groove Allows multiple hanging folders to…
I reworked the original model to fit my Fob circuit board. Thanks to the original creator for this great model.
Cupholder adaptor for late model Ford F150 to fit 24oz Yeti Rambler mug. There are also steps inside to hold standard and skinny cans. Unsure on fitment with other mugs and bottles. I made it to be a snug fit on the mug, the opening is…
Cupholder adaptor for late model Ford F150 to fit 24oz Yeti Rambler mug. There are also steps inside to hold standard and skinny cans. Unsure on fitment with other mugs and bottles. I made it to be a snug fit on the mug, the opening is…
1980 - 1986 Ford F-150 7th Generation Wall art Bullnose
ich habe diese hülle designt für das Handy IIIF150 B1 Pro nun habe ich immer ein sehr robustes Handy mit Stativ Aufnahme immer dabei die hülle ist Stabile und bietet noch platz zum verstauen einer z.B Bankkarte oder für etwas Bargeld auf…
A simple tray to hold a charging pad https://www.amazon.com/dp/B07GW9S9TB?ref=ppx_yo2ov_dt_b_fed_asin_title and my phone in the bottom tray of my F150 to keep it from sliding around
Ever need to fit a larger cup (RTIC) or water bottle (Owala) in your console cup holder and just end up frustrated? Pull out those narrow inserts and replace with one of these. I have not tried TPU yet, but I don't see why this design…
F150 camera shroud for use with Putco's Excalibur Light Bar
A few years ago I upgraded the radio in my 2005 F150 Lariat 2WD to support Android Auto. While I had the dash apart, I removed the factory 12V cigarette outlet, located under the radio in the center stack and replaced it with a dual USB…
F150 Center Console Organizer Tray 2017, 2018, 2019, 2020 Ford F-150 clip-on organizer. Clips onto the hanging folder rail. Room for: Sunglasses Pens Anything! Console illumination light pass-through design! Allows multiple hanging…
