Ford F150 High Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
***Note: I'm redesigning this mount to push the center of gravity forward.Mounts to third brake light with no…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 303
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
***Note: I'm redesigning this mount to push the center of gravity forward. Mounts to third brake light with no modifications to vehicle. Uses existing screws and holes. Recessed slots for fasteners. Does not interfere with brake light operation or visibility.
Attach a backup camera, rearview camera or GoPro to the roof of your 2018-2020 F150. May fit older or newer trucks.
Great for towing. Should work with most small waterproof cameras. Follows the contour of the light housing.
Uses minimal filament. Less than 1.5 hours print time on most printers. Print upside down with slots touching buildplate w/support over >75 degrees overhang.
If you like the design please consider a tip: https://www.paypal.com/paypalme/thisrudager
Category: Vehicles