109 modeli
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
Designed to suck only clean air. For example, from the filament package. Don't try vacuuming dust... Designed to have a firm friction fit. The firmness will depend on the printer and the filament. For the best results, cut the model and…
Achieve precise mortise centering on 12mm stock instead of the lowest 16mm setting the tool offers out of the box with this custom jig designed for the Festool Domino DF500. Perfect for non-structural projects, small boxes, and other fine…
Die Drehgriffe findet Ihr hier: https://www.printables.com/de/model/502882-sterngriff-knauf
Large falcon tube rack for F15 or F50 tubes, to be used for storage, aliquoting, etc. F50 holds up to 8x 50mL Falcon tubes F15 holds up to 18x 15mL Falcon tubes Edit: I added a couple of extra variations allowing for the flippable version…
I was restoring a honda amigo from 1972 and the taillight was missing, so, 3D printing to the rescue, I modeled this taillight. I recreated it from photos and without a real one as a reference, so it looks to me pretty accurate, but may…
Festool Domino DF500 Dust Extractor Cam Lock Adapter with Twist Lock 25 degree angle allows extractor host to be offset Printed in PETG @ 0.3mm
Flat design so it fits in my toolbox drawer. Prints well in PLA with low infill.
printed with bambu standard petg presets 30mm m3 bolts were used for the latch and the hinge
Dock for holding the DF500 up, to the MFT3 table aluminium profile. Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail. The DF500 slides and is held tight…
Dock for your Festool DF500 Domino. Allows you to have both hands free for cutting mortises in smaller work peices.
I was restoring a honda amigo from 1972 and the headlight was completely broken, so, 3D printing to the rescue, I modeled this headlight casing. It works really well, the speedometer, light switch, lens and all other gear fits perfectly…
Portable refracting telescope. (lens : 80mm F500) Includes cradle and focuser. << For dual focuser assembly, please refer to the link below >> https://www.printables.com/model/1385830-dual-speed41-focuser << File name convention >>…
NOT an official step file, just my quick measurements. Used it to make my snap fit case: https://www.printables.com/model/1358459-wolfbox-mf50-snap-fit-case Basic nozzle included. As for other nozzles, I did not include any of the…
This upgraded angle plate for the Festool Domino DF500 or DF 700 provides a better stability and rigidity than the factory version. The file JOINT can be printed in TPU to hold the 2 M5 screws. Category: Parts
A quick easy to print holder for the WOLFBOX MF50. Sturdier then the plastic tray that comes with the electric duster.
The minimum plunge depth of the Festool Domino DF500 joining machine is 12mm when using any Domino size other than 4mm. When joining material to the face of 12mm plywood a plunge depth of less than 12mm is desired. This attachment for the…
Mount your Wolfbox MF50, inclusive accessories, on your Skadis pegboard! Using the T-Clip System by @LineArcLine. I printed it with 15% gyroid infill with the big flat face on the print bed. Support enabled for the horizontal parts. See…
Another glue spreader for the festool Domino DF500. I Made it to suit to our glue bottles from Ponal. Using this glue spreader only makes sense if you do bigger glue ups… for one or two domninos, the cleaning afford is to much…. With a…
Ein Adapter von osVAC neo auf Festool z.B. Dominofräse DF500
Celebrate automotive excellence with this 3D printable STL model of the 1995 Ferrari F50. This supercar masterpiece model is perfect for automotive enthusiasts looking to display the exhilarating design and raw power of this iconic…
Store your MF50 fan in a personalized case. INSERT piece needs to be printed in PETG for snap flexibility. All printed supportless, with an insert designed to press fit into the case (0.1mm clearance). Magnet holes are for 5x5, but STEP…
Festool DF500 bit Holder print with tow colors infill : 20% layer hight : 0.20mm ( Quality )
Simple case to store the Wolfbox MF50 blower, the lid is optional, you can put whatever gridfinity box on top instead. The simple pull over clamp might be adjusted in size to work with the material shrinkage you have, just adjust in the…
I needed a way to easily store and grab my studfinder but I'm totally out of drawer space, so on the wall it went. I'm by no means a talented or trained CAD designer, this was made in TinkerCAD. It needs minimal supports, just to support…
Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art
This is a 3d printable replacement for the Stepcraft vacuum adapter for HF500 spindle made in 2019. In my case a Stepcraft D840. I was having clogging issues with the original one when cutting MDF so I redesigned it to make the internal…
Handle for DF500 to improve handling. Slide on the back of the domino. Printed in Atomic PETG Neon Green An ergonomic handle is harder than I thought. Size can be tuned in the enclosed Fusion .f3d file.
LG made this amazing portable projector with native 1080p resolution and a built in battery, but for some reason decided not to make a lens cap. As a result, dust accumulates quickly when you throw it in your backpack for a weekend trip…
This is a remix to connect OS Vac Hoses to the excellent BlastGate of stevetecx to connect to 50mm HT pipes. You will have to print the file from this model as well as the following from the Original on Thingiverse (link below): 1x…
Allows for depth stops shallower than the 12mm minimum depth provided by the standard depth stops on the DF500. Includes: 10mm, 8mm, 6mm and 2mm I printed this in PETG. The stops can be easily snapped on or off the pull rod by hand.…
Quick remix to make unit easier to remove, no lettering, and 6x3mm magnets.
osVAC neo F50 + step + Fusion 360 I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
I created a stand for my Wolfbox MF50 + accessory nozzles to sit on my workbench for easy access. It includes an integrated channel in the bottom which provides airflow to the vent on the bottom of the unit. The charger port is uncovered…
Made my own version of gridfinity storage for the Wolfbox MF50 in a 4 by 1 gridfinity grid to save on the used area andi improve grabability. This fits perfectly in the deep Ikea Alex drawers.
These are a pair of well-fitted mounting brackets to wall-mount a Mayflash F500. Modeled in Onshape, they match the angles of the body of the joystick and hold it flush against the wall. I printed in PETG with 0.2mm layers, but PLA should…
Made a holder for my MF50 to mount it on Multiboard. Recommend using 2 multiconnect connectors, but 1 could work too.
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
This is a part to place on the brake. It allow you to put in place the sensors to make sure de magnet is aligned to it. Once printed you have to cut the part which is going arround the cable to make it trought. Also i've already make…
Print it as you prefer, I just recommend a brim as the design may be prone to warping. Higher infill will help in rollover accidents. I printed mine in PETG 60% infill.
Simple mount I designed to hold the MF50 under my desk. Can be mounted to hold vertically or horizontally and can also be mirrored in slicing software to reorient. Should be no problem to wall mount as well.
Cuscinetti lineari con flangia tonda serie LMF misure da LMF6UU - LMF8UU - LMF10UU - LMF12UU - LMF16UU - LMF20UU - LMF25UU - LMF30UU - LMF40UU - LMF50UU. Creati con solidworks con passaggio semplificato. per le misure complete consultare…
Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s
This project includes two Multiboard attachments designed for the MF50 Wolfbox tool : A holder for the MF50 Wolfbox device itself A separate holder for up to 4 nozzles
To fit into an l-boxx mini, I made a gridfinity bin that fits the Wolfbox MF50 air duster.
Dass man die Fräse nicht von unten absaugen kann, schränkt die Möglichkeiten stark ein. Besonders wenn man eine Frässpindel für Fräser mit 8 oder 12mm Schaft benutzen möchte! Gratnuten und verdeckte Nuten können so nicht gefräst werden!…
Follow the Replacement instructions to replace the metric depth stop. Printed in Atomic Carbon PETG PRO .
Just a case to store your MF50 with its acessories
Mount to the wall with countersunk screws. Done!
made for RYOBI ESF5002 Studfinder used with HSW (Honeycomb Storage Wall) Slide Mount supports: Yes
This is a Bahtinov Focusing Mask for a Stellarvue F50 Guide Scope. This greatly aids manual focusing by using three angled diffraction spikes to accurately focus.
Holder for the Wolfbox MF50, design to fit IKEA SKADIS. Print with supports for the hooks. I used 15 % infill with 3 walls
Attach the base to a piece of plywood or any flat board and clamp vertically or horizontally. If you print with the plastic that shrinks (ABS/ASA), you want to scale the model 1-2% up ( the model printed as-is in ABS is a very tight fit…
Print the mounts. Print 3x universal attachment. Voila.
Abstandhalter um das Problem mit nachlassender Saugwirkung bei den GAS 35 Modellen von Bosch zu beheben. Ja nach Verschleiß am Ventilteller 1607000F50 Bauteilhöhe anpassen, bei mit war 1 Millimeter ausreichend. Einbaupositon Bild 3 in…
Wolfbox MegaFlow 50 (MF50) Honeycomb Storage Wall Holder Mount your Wolfbox MegaFlow 50 and accessories to your Honeycomb Storage Wall. Print Settings 0.2mm layer height 15% infill (could probably get away with less)
During my airsoft night games I found that when we split up that it was sometimes hard to see who was who. Using a small and simple print and some gel color filters I was able to create some very nice colored lights to distinguish my…
It was annoying that Scheppach didn't design one to begin with so here we go. Printed in PLA with 0.2 mm layer height on a Prusa Mk4. The support material was a bit tricky to get out but it's possible. You will have to cut a hole in the…
Ferrari F50 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
Router table insert plate for Scheppach HF50 Ø12mm, Ø22mm, Ø47mm Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: any PLA - Category: Machine Tools
Just a few parts I made while working on a CRF50F. It is two handle bar end fillers to reduce help the grips survive a fall without having a hold punched in the end of them. I also add a small bushing between the rear brake pedal pivot…
It's a throttle tube for the CRF50F, exactly the same as the OEM; Because the plastic was a bit different I used wd40 to lubricate the bar but it fits great! the normal thottle tube fits over the end of the bar like the OEM, but the…
This is a mount for Raspberry Pi 4 and Armour case for the open mower project. Fits in a YardForce classic 500 mower. You can also mount the Pololu AltIMU-10v5 but i do not recommend at because auf interference. Use M3 for the clip3 Use…
Thanks to @PrintingPerspective for the great original model. by @CriptasticHacker https://cripsrise.neocities.org/ Please leave a ♥ if this helps you :) The MF50 is perfect for suction adapters given its hex shaped plastic body.…
A flatter, modified model for the turn indicator lamp cover that can be printed in translucent resin. I'm restoring my 25-year old bike and decided I wanted to change a few things around.
This is a more ergonomic replacement for the steam valve knob on the Jura F50 espresso machine. The original is not grippy enough when wet or slippery. This should also work on the older Jura F7, F8, F70, XF50 and XF70
We have a OXELO Freestylestep MF500 step for the kids. While it's a good and sturdy step, braking takes quite a lot of force/weight. The kids have to press really hard on the brake metal before it even touches the wheel, therefore…
The WOLFBOX MF50 Compressed Air Duster is a best-selling (#1 on Amazon) fan-powered air duster. It's a great product; compact, rechargeable, and surprisingly powerful. This product gives you a super handy "holster" that lets you mount the…
Držák filtrů na vodu (viz foto). Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.25 Infill: 80% Filament: PET-G, ASA, ABS... Category: Bathroom
Vertical stand for Mayflash F500 Fight Stick (and maybe F500-Flat) Recommend using 3 wall loop, 15% infill, and Gyroid pattern.Vertical stand for Mayflash F500 Fight Stick (and maybe F500-Flat) Recommend using 3 wall loop, 15% infill, and…
Adapter for Parkside vacuum cleaner. Connects the vacuum to a corrugated pipe Ø50. No latches needed. Also fits the outl
Printed with supports on the bottom of the fins, I used 3M double sided tape. Gluing is probably a more secure approach.
Felder KF500 Dust Extraction Adapter for use with shank cutters. Enhances safety and provides a dust extraction connection for a 30mm hose.
Holder for projector so it doesnt slide
Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file
I’ve made a blind cap in various KF sizes. The blind caps fit perfectly. Because the surface isn’t perfectly smooth after printing, these blind caps aren’t suitable for vacuum applications. As shown in the photo with a turbo pump, the…
This is a handy holder for the WolfBox MF50 air duster. The model comes with 3.5mm screw holes to attach the holder to a shelf/workbench so that you can store the air duster out of the way. I printed it with 20% infill, 0.2 layer height.…
Manually paint the support on the hinge area as well as the latch. Make the layer height as small as possible.
I wanted to be able to remove the spindle without cutting any cable ties, but still keep the cable and air hose out of the way of the machine's motion. To be printed in PETG (PLA could deform if the stepper gets hot) standing vertically…
INTRO The Wolfbox MF50 is a great tool but it always felt a little small and cheap in the hand. I made this TPU cover to improve the feel of the device and hopefully improve its durability, while maintaining the design aesthetic as best I…
This is a replacement lock arm for the Mitsubishi MF501B 360kB floppy drive. I needed it for MF501B-312M, but I suspect it is compatible with other early Mitsubishi 5.25 floppy drives, with bolt mounted lock arms. I loosely followed the…
I’ve optimized the OS-VAC Neo F35/F50 to HT50 Blast Gate to ensure smoother operation and a more secure fit. Key Improvements: Spacer Adjusted: Increased from 4.00mm to 4.2mm . This provides slightly more clearance, ensuring the gate…
French Cleat style holder for the Wolfbox MF50 duster ( https://www.amazon.com/dp/B0DSW7R4VN ). I didn't like other holders I saw out there for this unit. I wanted something compatible with wall mounting and I wanted the attachments to…
More Information I designed these mounts to ensure the scooter's battery pack is held securely and rigidly in place. The model features dedicated slots for zip ties at both the front and the back for extra security. For reference, the…
I have created this screw panel to hold the screws in the order that they were removed to ensure proper reinstallation. I have also added an anti-seize well for the reinstallation process. The screws fit tight so a screwdriver or drill…
I have created this screw panel to hold the screws in the order that they were removed to ensure proper reinstallation. I have also added an anti-seize well for the reinstallation process. The screws fit tight so a screwdriver or drill…
I have created this screw panel to hold the screws in the order that they were removed to ensure proper reinstallation. I have also added an anti-seize well for the reinstallation process. The screws fit tight so a screwdriver or drill…
Headphone Stand for Hifiman EF500 DAC/Headphone amp Print on the side No support material needed. I covered the top with self adhesive microfibre fabric Included is the f3d file
Summary Customized attachments for the Wolfbox MF50 dust blower for individual areas of application (keyboard, notebook cooler, all types of filters, etc.) Print 0.16mm layer height 3 outer walls / perimeters 15% infill supports are…
Celebrate automotive excellence with this 3D printable STL model of the 1995 Ferrari F50. This supercar masterpiece model is perfect for automotive enthusiasts looking to display the exhilarating design and raw power of this iconic…
Used for wolfbox mf50 to hold nozzles on skadis board Print with supports! I used 100% infill, 0.2mm, with grid style supports, takes about 2 hour on mk3s
printed with bambu standard petg presets 30mm m3 bolts were used for the latch and the hinge
Flat design so it fits in my toolbox drawer. Prints well in PLA with low infill.
INTRO The Wolfbox MF50 is a great tool but it always felt a little small and cheap in the hand. I made this TPU cover to improve the feel of the device and hopefully improve its durability, while maintaining the design aesthetic as best I…
Abstandhalter um das Problem mit nachlassender Saugwirkung bei den GAS 35 Modellen von Bosch zu beheben. Ja nach Verschleiß am Ventilteller 1607000F50 Bauteilhöhe anpassen, bei mit war 1 Millimeter ausreichend. Einbaupositon Bild 3 in…
Attach the base to a piece of plywood or any flat board and clamp vertically or horizontally. If you print with the plastic that shrinks (ABS/ASA), you want to scale the model 1-2% up ( the model printed as-is in ABS is a very tight fit…
I’ve made a blind cap in various KF sizes. The blind caps fit perfectly. Because the surface isn’t perfectly smooth after printing, these blind caps aren’t suitable for vacuum applications. As shown in the photo with a turbo pump, the…
Holder for the Wolfbox MF50, design to fit IKEA SKADIS. Print with supports for the hooks. I used 15 % infill with 3 walls
Printed with supports on the bottom of the fins, I used 3M double sided tape. Gluing is probably a more secure approach.
Made my own version of gridfinity storage for the Wolfbox MF50 in a 4 by 1 gridfinity grid to save on the used area andi improve grabability. This fits perfectly in the deep Ikea Alex drawers.
