1207 modeli
Attachable Fence for tracks/guides from Festool and Makita for 90 degree rip cuts. One can attach a piece of plywood at the reference edge for a longer fence. Print instructions PLA 0.3mm layer height 3 perimeters 20% infill (gyroid)…
Wydruk około 7,11 €–8,69 € nettoWstępna wycena jednego wariantu
Hier ein Hindernis und zusätzliche Zaunteile für Spiele mit Schleich Modell Pferden. Hinweis: Ich habe mittlerweile etliche der Gatterteile gedruckt. Bei Verwendung von PLA brechen die Verbinder viel schneller als wenn PETG verwendet…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can find a fitting trailer here .
Wydruk około 0,36 €–0,43 € nettoWstępna wycena jednego wariantu
Ersatzteile für Schleich Horse Club oder als Anbau ans Puppenhaus Weitere Teile: https://www.printables.com/de/model/50036-pferde-gatter-zaun-hindernis-gate-fence-obstacle-s…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Levi Sitts provided a great collection of gargoyles (see here : https://www.prusaprinters.org/prints/20577-gargoyle-fence-post-toppers ) I wanted to put a couple of them on top of two solar light posts, but my posts have pyramidal tops -…
Wydruk około 2,71 €–3,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You know, for the kids.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Fence Flowerpot
Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu
So far happy with the looks and takes about 55mins on the mk4 @ .2mm Speed setting. Not sure how the color will hold up but thinking that I can paint them if the sun bleaches them too much.
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
I made this model to secure our Philips Hue Festavia string lights to the top of our terrace fence. The top of the fence has the following dimensions: H: 4 cm (1.5748 in), W: 2.9 cm (1.14173 in). The fence also has a small 2mm indentation…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Deutsch Mir fehlten bei einem typischen Mattenzaun auf manchen Pfosten die Kappen. Die Pfosten haben ein Außenmaß von 6 x 4cm, sind aber nicht perfekt quadratisch sodass sie bis zu 4,2cm Außenmaß haben. Für einen perfekten Druck des…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Had some materials left over from other projects and decided to make the kids a set of monkey bars over their sandbox. I made this part to allow for locking the bars from spinning freely. Metal base flanges cost over $10 locally so beefy…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a clip to attach a cable to a fence. Nail a normal nail into the fence, place the cable in this clip, and then hang it on the nail. If you want this already printed and mailed it is available to purchase here. I am the only one…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are several chain link fence camera mounts, but none worked exactly as I wanted, so I created my own. I needed a GoPro mount that I could use to hold my camera on the fence to record and stream my son's little league games. This one…
Wydruk około 5,66 €–6,92 € nettoWstępna wycena jednego wariantu
The cap from the gate post around the pool disappeared. This is a quick fix until a more intricate one can be designed. I wanted this to be as quick as possible so I changed all the speeds to at least 70mm/s. Thoughts?
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
0.6mm nozzle 9 and 10 mm number height, Helvetica Rounded font sticking out 0.6mm from wall.
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Fence post cap for planters that can support any item up to 10.5" round footprint. fits a 4x4 post snug, has 4 small notches for nails/screws for added support. Drains well and wont flood your planters in heavy rain, and it has an inner…
Wydruk około 9,39 €–11,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter to use the Kreg KMS7215 Micro-Adjuster with a POWERTEC 71536 Router Table Fence: 1 ¼-20 nut needed: the print is interrupted at 10mm to insert it. Connect the adapter to the fence first, at the left handle, then screw the…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You will need a battery, a high voltage generator and conductive wire. And 3D printed components to keep the wires from the wood and each other. Hooks. To keep wires close to each other and free from the wood. Corners. To get the wire…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design was heavily influenced by the fencing weapon tester by Yafra7, but I wanted to implement some changes to make it easier to print, hold the components in place securely and to fit the components available to me. the electronics…
Wydruk około 3,85 €–4,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's a replica of a fence support
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
It is made in Fusion 360. I made it myself for a fence, because buying such elements is expensive. The diameter of the fence wire is 2mm. I printed this element with an Anycubis Cobra 2 pro with PETG filament.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Somewhere safe was needed to keep the fence & spare collet so I came up with this.
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
Not sure how I wanted the skirts for my 🥰 BoxTurtle , whether to go the true mesh way or rather opt for a mesh-like look only but have them printed solid 🤔, I played around in CAD to have the mesh as a separate part and also to do some…
The 🥰 BoxTurtle Enclosure comes with a redesigned front and different skirt parts which require some changes to the TurtleFence . So here they are: Modified front skirts, spacers and the clip-in mesh inserts to fit the enclosure … and of…
Inspired by The DOM organizer. I modified the dugout organizer design made by John Tedesco ( https://www.tinkercad.com/users/hRCDevMzLeH-john-tedesco ) https://www.tinkercad.com/things/4cf5V6weAc0-dugout-organizer The design of the bottle…
Remixed from a variety of sources. See links below. I scaled and modified each model to work with my universal post adapter. Print a universal post adapter for each model and glue the dovetail joint before painting. The paint and primer I…
A set of 30mm tall fences for use in my mother's Christmas village. The fences are made with individual fence posts and fence segments that connect them. Everything connects together with a press-fit mortise and tenon. Small bases can…
Just made a easy to print Hoarding / Fence for your construction site :) It's in scale 1:14, so it fits perfect to the Tamiya RC Trucks ( or Less , Scaleart and so on ). Flat on the back, so very easy to print. Splitter in 2 parts, so you…
I built a DIY router table a while back and needed a connector for my regular old shop vac (I don't own a fancy dust extraction system with 100 mm hoses ;-) The part prints without supports and can be screwed right into your fence without…
This is a toy animal fence that I designed to be compatible with the products of a renowned European toy animal brand. If you intend to print this on a vanilla extrusion-based printer, you should use the "FDM" version of the STL and…
This handy unit both gives you a place to hang your gear bag, and also keeps your water bottle handy for hydration. The photo shows a version emblazoned with my local club's initials (Bellingham Pickleball Club), but the posted STL file…
My girls recently started getting into Playmobil sets and have several with horses. They wanted horse corrals to go with them. Seemed like a fun thing to design and 3D print. The sections just snap together and can rotate to make corners.…
A wicker fence for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE The supportless giant model seen in the photo is available on my Patreon . Let me know…
A small fence to be used in your garden (pot/kitchen garden) to mark the delimiter between different plants. Different versions in regards to “wear and tear”. Size of the fence (fences) is roughly 18X18 cm (7x7 inches)
Rework of the Thingiverse parts by kaltmann (not on Printables)
Motivation The xTool RA2 rotary is a great accessory, but it can be challenging to square the workpiece up to the RA2 rotation axis. Solution Design and print a fence to achieve the following objectives: Allow workpiece to be held square…
The Idea This problem was not mine, but it was made to be mine. My daughter started to use hair ties and hair clips and those started to fly around over the whole bathroom. I found them everywhere. To stop this mess I designed this…
Straightforward print no supports
If you guess the exact colour, you deserve a crown! Scoring is the same as the original fence, 3 for the centre square, 2 for the 8 surrounding it, and 1 for the circle beyond that. Scoring values are marked on the fence! Print at 0.12…
This is my take on a crash barrier wall with an attached, chain link style fence. This was inspired by the Ninco fence product, but the end result is quite a bit different. It is designed to be able to bend easily in either direction with…
Ces différents types de barrières peuvent être utiles sur des réseaux de modélisme ferroviaire dont le thème est la société des chemins de fer français (SNCF). Je modélise tous mes modèles de manière à ce qu'ils soient imprimables avec…
Not Affiliated with Ridgid. Fixes the slight wobble in the ridgid table saw fence before you clamp it down. It replaces the two white plastic parts on the bottom of the table saw. If you use it let me know! it's a work in progress. I…
When we start our new vegetables in the garden, it is always a fight against the slugs. When the slug slithers up the side of this fence, it is not smart enough to slide down the inside of the rim, around it and up the top surface. My…
This is a complete of fixed fences for positioning items on the xTool F1 Ultra. This set consists of straight, right-angle and cross fences in all relevant sizes. These are held in place with standard m4 thumb screws.
The model is in 1:16 scale, which would give it a 1:1 scale size of 3.45 m x 2.01 m Scale the model up or down depending on what scale you want! Print at 0.2mm layer height Fence dimensions: Width 215.75 mm Height 125.85 mm Depth 2.50 mm…
Duplo compatible plank fence generator in OpenScad. You can easily tweak any parameter you want. Turn on or off supports. Make it extra long, short or high or without vertical planks. Some original bricks that you can replicate and…
This is a picket fence created for an o-scale 1:48 model train layout. It can be scaled to fit any other scale or just printed for decoration - (ho scale is 50% scaled, and n scale is roughly 25% scaled). Printing Instructions (Standard):…
The fence size is the same as Timo's, but allows cutting at -45, 45 degree angle. In addition: Added .1 mm to fit more easily Add lock mechanism with 2 M3nS nuts and 2 M3x14 bolt (from the MK3S+ Fasteners spare bag) to lock the track. The…
Fence Want a fence for your pigs? It's good tactics so the pigs don't dig up and eat your potatoes. I provide a wattle fence. One straight and one bent. https://www.myminifactory.com/users/terrain4print?show=store Access to all new models…
A pair of chain-link fence sections (short and tall) for your modern / super-hero / horror or other tabletop miniature games. If you like these free files please check out the full set here…
Printing material: PLA: can be more ecological PETG: is more UV resistant Sizes: hight diameter (inner) diameter(outer) 6cm 12.2cm 20cm (fits for MK4) 6cm 18cm 6cm 7.2cm 15cm Slug fences of same model/size are pilable. Slug fences are…
Really simple and quick-printing wire fence in n-scale (1:160). Print settings 0.25 mm nozzle 0.05 mm layer height print in provided orientation no supports required any PLA should work fine The fences shown in the picture have been…
Glue Stick may help with the pointy part warping. Turn off elephant foot compensation too. Yeah, the gnomes help and all, but if you wanted their help, you would ask for it. Join my patreon to sell this commercially!…
holster for the hdr 50 umarex revolver
Fence that can be found round industry.
Additional fence for the Makita PJ7000 biscuit joiner Parameter: Walls: 3 Infill: 15% Infill patttern: gyroid Support: yes Material: PETG or PLA , 112g (incl. support) Disclaimer The use of this attachment for the Makita PJ7000 is at your…
Fencing for any kind of model, from dollhouse to train, including RC. This one is easy to print and requires no support (brim does help). One version (basic) is freestanding, while the other interlocks very nicely. Both are freestanding.…
Print flat, and wait for build plate to cool before removing to prevent bending. I print in PLA, paint and glue them into position.
I spent a long time looking for an elegant solution for the steep curves that isn't permanent. I found the safety fence and adapted it to the scale and my clips. I have modified my clips so that they can be used in steep bends. The fence…
The most common modular concrete fence in the USSR and Russia, which became a visual symbol and brought fame to its author - Boris Lakhman. File in scale 1:100. Print instructions Supports: No Resolution: 0.2 Infill: 30 Notes: For greater…
Vertical planting vegetables - Seeded vegetables separation fences and id labels I have printed in PLA Burly Wood, but this models can be resized, customized and printed on any other filament according to your needs.
Update 2024-4-29: I've uploaded a pair that have minimal supports. I really don't recommend using them, as the models with the built in supports have been fine tuned over dozens of test prints to provide the best printability and most…
A small construction fence that fits my fence feet. It can be printed laying down with minimal support for the little pins. The fence is around 23x 14cm big.
Secure your tabletop battlefield or urban zone! This modular print in place chain link fence set , designed for 28mm scale , is perfect for modern, sci-fi, post-apocalyptic, or even zombie-themed terrain setups. Use it to enclose…
Made the main base larger (about 9 ½ in or 240 mm wide) and added two holes at the top for possible bungee connection. Original cup holder and fence hook still fit. Used the original print suggestions, but added a modifier on the bat…
I set out to make a “Wedgie” sled for segmented turning but realized I already had made this sled based on the plans that came with the Microjig Zeroplay 360 Sled Kit. instead of cutting, gluing, and routing slots in some janky scrap…
A fence for guiding a router to cut dados. Fence is attached to the baseplate using M5 hex bolts with washers and wing nuts.
Baseball and Softball fence rack. It features : 1 Bat holder 1 Bottle holder (up to 85mm. Owala-24oz can fit easily) 4 Hooks 1 decorative moustache (because it's cute) This model is free for personal use only. Please, contact me if you…
This is a 0.03 scale model of the fence I built for my yard, which is not exactly HO or O scale. I chose this scale because it looks nice. If you want something different you can adjust this in your slicer. The fence panels and feet are…
Need : - 2 carriage bolts, ¼-20 x 2 1/2", you have to grind a little bit the head to make it fit into the track channel - 2 ¼-20 nuts, pause the knobs print at 8.00mm and insert them
Printing Instructions: Perimeters x1 (I found that just one perimeter was required.) Top & bottom layers x3 Infill 0% If you have any questions, please feel free to contact me & please share your makes Thx.
This is an scaled security fence, similar to the one used by police as crowd control barrier. My son uses it with him hundreds of Playmobil figures, simulating concerts and other crowded situations. You must print one fence with two fence…
Universal parametric system for creating snail collars and snail fences. (slugs too!) Using the type, you can make all the elements in the OpenScad file as desired. With the division into several segments, even with small printers a large…
Support to hang Padel racket in the on the wall or in the mesh or fence. Models have rounded finish.
(Description in english below // Englischsprachige Beschreibung folgt unten) Hier ein Modell eines Bauzauns im Maßstab 1:32, z.B. für eine Carrerabahn. Im Set sind 4 Teile enthalten: Der Bauzaun, eine Personentür, Standsockel und…
my take on the balloon head fighters like the ones in https://www.thingiverse.com/thing:6173073 print in ABS, PLA, PETG or Nylon supports needed for almost all parts you'll need: 3-4mm elastic cord (round or flat) double face tape or glue…
I return to my fantasy ruin modular set, this time for Fences, with lots of styles! I continue to minimize wasted material on supports so I continued the modular wall concept, but just with fence motifs instead. To reduce the overall time…
This 3D printable balisong-style fidget toy is made for smooth flipping and maximum fun. Designed as a safe and simple fidget tool, it captures the motion of a butterfly knife without any sharp edges – perfect for keeping your hands busy.…
This is a part to replace the small block that the fence uses to clip the guide fence to the saw table. And, greatly improves the repeatability of maintaining square when the fence is moved to a new dimension.
This is a removable Stake used for Gardens, fencing and other uses. It has a low profile knob so you can find it to remove it and hang it when not in use. It prints flat with no supports. I have provided several sizes, but you can modify…
Really simple and quick-printing pasture fence in n-scale (1:160). I used it for horse pastures and a shepherd with his sheeps. Personally, I particularly like a two-color print: the print is started with brown filament and a color change…
This is a GoPro fence mount. It can be very helpful at many places. Now you can enjoy activities without having to worry about holding your camera. I included 2 files. One with a safety string loop and one without. The mount can easily be…
Print with 100% infill to make it strong enough to catch a car crashing into the fence.
Inspired by the source models, this hook was redrawn with considerations for strength and smooth contours to be more friendly to fabric materials. Intended for use with various sport equipment bags while on the court.(Pickelball, Tennis,…
Fence post cap for 4x4 (actual dimensions 3.5x3.5") I used 10% infill and 5% supports Please LIKE if you found this useful Print Settings Printer: Voxelab Aquila Rafts: No Supports: Yes Resolution: 0.3mm Infill: 10% Filament: PLA+ PLA+…
An expansion to the first wattle fence, found here: https://www.thingiverse.com/thing:2283338 https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on…
Keep your Kapex from blowing out the grain on the back side. I've seen similar items, but they were bolted to the saw only worked at 90 degrees. This is easily removable and also allows the saw to move freely while installed. Front face…
Decorative fence to border a garden bed or a flower box. You can choose from two versions. A smaller fence is suitable for a flower box. You can use the larger model to border a garden bed. Use glue. Two sizes Small Fence: 19x12 cm Fence…
When you have a farm, you can always use more corral space. This is a simple print with two parts that can be superglued together. I have printed in both PLA and PTEG with standard 0.3 layers and no supports. I used a Prusa i3 MK3S+. The…
a replacement part i modeled. A piece broke for the tower bridge
This is a simple drawer that should fit in the ends of the fence tubing on Sawstop PCS and ICS saws with the T Glide fence. You can just pop the end cap off of the tube and this should fit right in. Pretty much every aspect of this is…
Remix of https://www.prusaprinters.org/prints/71490-removable-fence-stake-garden-stake-landscape-stapl 30x90 without the head and text, 12 pieces.
This is the print setup file for the track saw fence with the STL rotated so it will print on its back. The skirt must also be disabled or the print will be out of bounds.
Mini Garden Fence. Surround your herb garden or seperate your lawn from a flower bed. This makes you garden look nice and fancy. Print as many as you like and connect them together. Connectors are easy to model and print (I might upload a…
A set of three caps for 4X4 fence posts topped with low poly birds. Designed to freak out the squirrels that use my fence as a race track :) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: No Infill: 20%…
This is a custom flip stop for a DIY woodworking tool fence (drill, saw, router, etc.). The model is fully parameterizable, so you can open the attached Fusion 360 file, change the parameters and let the model adjust itself to the height…
More miniatures see Collection Post variations: 90° corner post Post End post
Různorodé betonové ploty pro modelovou železnici
