Liczymy pasujące modele…
Dieses Schiffchen entstand nach den wünschen meiner Frau. Da die sonst recht kantigen Modelle ihr nicht zusagten, entwarf ich kurzer Hand, ein eigenes. Gedruckt auf einem Bambu Lab X1 Carbon Silky PLA von ESUN 230 Nozzle 50° Bed in 0,2 mm…
Little base I made for the Puffco Peak. Please let me know what you think!
Some one broke the glass so I made the fix.
PLA Settings that prove to work: *0.2mm layer height *20-25% infill (cubic or gyroid) *3 walls/perimeters for strength and visual appearance (not necessary, just suggested) This is designed to print without supports. Pairs best with the…
It's a pretty good problem to have: your Peak glass collection is growing, and you need to make sure they stay upright. Sure, Puffco sells a glass stand, but you have a 3D printer. Carefully designed to snap onto the base of your glass…
Diamond Painting Schiffchen dem Original ähnlich. Diamond Painting boat similar to the original.
Diamond Painting Schiffchen dem Original ähnlich. Diamond Painting boat similar to the original. Category: Art
This part can be used to connect a Raspberry Pi camera cable to an FFC/FPC port that has a broken or missing plastic latch. To use, simply insert the camera cable into the port, and then secure the cable by inserting the printable part…
Eine Box zur Aufbewahrung von 20/40 Schiffchen für Diamond Painting inklusive Deckel und Stellfüße.
This simple stand is designed specifically for the Puffco Proxy vaporizer. It securely holds the Proxy while keeping it steady and upright, when not in use and on display. The stand is compatible with the stock Puffco Proxy glass,…
Puffco peak cotton swab holder/qtip holder. Print Settings Printer: Prusa Original Mini Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .20 Infill: 15% Filament: Prusament PLA Lipstick Red Notes: I started printing vertically…
Mount for DIN 35x15 Rail, It's offcenter by 5 mm to sit flush against the 2020 extrusions when using a 4mm corrugated plastic and 1mm VHB tape (two side sticky tape) I've added a tape spacer to position in the din rail to be able to stick…
Tray organizer for the older generation Puffco Peak. Might work with newer model. feel free to reach out with dimensions of newer model and I will modify to make work if need be. The tray templet is optional. You can tape the templet down…
Travel case meant to hold all accessories you may need for your pivot. Magnetic lid for slim design. Used PETG as it was already loaded on the printer. Can hold Puffco Pivot 15ml dropper bottle for Iso 5ml Concentrate Jar Q tips Dab Tool…
https://www.amazon.de/dp/B077Z8QN3S?psc=1&ref=ppx_yo2ov_dt_b_product_details This was ones r good but 3mm offcenter .
Źródło oznaczyło ten model jako treść 18+.
This set is a top cork cap and bottom cap for the normal puffco peak glass. They're meant to be printed in TPU and should fit on pretty snug. If your print settings are right, everything will be water tight. Print Settings Printer Brand:…
Didn't really see any models I liked for the Proxy on here so I decided to make this. I'll likely make more Proxy accessories in the future as I continue to find problems! Printed with Prusament Ultramarine Blue Transparent PETG, - .4mm…
These are the all the parts I use to lighten the printhead of the FFCP, improve cooling and cable management for single extruder use. Needed hardware: 6 x short M3 heatset insert (CNC Kitchen) Optional: 2nd cooling fan + 2 x M3 heatset…
A tidy station for the puffco Pivot and accessories. Features Include: Pivot Holder hotknife or tool holder Q-tip storage PEARL STORAGE and of course a spot to keep your concentrates
This bracket will screw in using one of the bolts on the side of the machine. The feet will rest inside of the handle. I've had it installed with heavy use for a few months and its been solid. Print Settings Printer Brand: FlashForge…
A stand to hold both halves of the Puffco Plus, a hot knife, and q tips for cleaning.
I wanted to change the color of the Proxy's new Core cup, so this goes over the existing cup and does not replace it like some other models. This was printed in TPU and has a hole in the bottom to make it easy to take on/off and also…
I have a physical version for sale on Etzy .
repair from keyboard notebook noizze ABS 0.2mm Category: Computer
i broke my glass, never use water, prefer lower profile
I wanted an upright stand for my pivot that would magnetically click into my gridfinity setup, so I created this simple model. The hole is a little big for the pivot to enable easy insertion and removal, but if you'd like it more snug,…
a short and simple anti tip base for the puffco proxy. keeps oem glass upright and prevents catastrophic tippage
You don´t print this part with PLA or other rigid filament, you need print it with flex filament Cable of the Artillery X1, during the movements of the X axis the FFC Cable can have a bad contact and burn the FFC tracks and the connector…
Storage for wire offcuts, for people who like to reuse things and can't bring themselves to throw short bits of wire away. Get rid of the box of wire spaghetti and find the perfect reused bit of wire quickly when you need it. Most are 4u…
Fluffcorn is a bundle of magical goodness that is ready to make your messaging (and printing) experience 100% cuter. Fluffcorn Stickers is used by 1.3+ million users and is featured by Apple on the App Store — now you can 3D print…
This is a 3D Model of a Marker that will perfectly fit a Puffco Plus Portable Dab Nail. Its not a very good disguise so I would not condone using this to smuggle the pen into places it shouldn't be, however, it does do a good job at…
Say AA Pivot! A simple stand for holding the mouthpiece clear when filling your well. Tried to make it as brainfart compatible as possible, enjoy.
so i broke the glass of my new peak by tipping on a table, so i desing this bumper for it that fits perfectly on the inside of the tip of the glass, and its made from tpu, and feels nice on the mouth so its a plus. Print on tpu, 2 walls…
This simple yet functional weaving shuttle is designed especially for children's weaving looms. With smooth rounded edges and a lightweight form, it's the ideal tool to introduce young crafters to the basics of weaving and textile work.…
Howdy! I was tired of placing my dab tool in between keys on my keyboard so I designed this holder to keep the tool out of the way. Includes a small cut out for grabbing the tool in the rear. Currently the tool fits in loosely, however, I…
Modeled this off the stock one. It fits snug and flash against the bottom lip of the chamber. Also, the same dimensions as stock so anything like the oculus plug or Puffco ball cap fits perfectly. Only for the Puffco Peak Pro. Print…
UPDATE 1: Added tighter fitting lid. This FFC Barrel allows you to shorten any flat flex cable no wider than 16 mm to the desired length, without cutting the cable. It includes a small hole in the bottom which allows you to fix it in the…
This is a Puffco Peak Pro desk mount that has room for a wireless charger sure many will fit but diameter is set for 87.5 mm. The wireless charge i used is a onn WIABLK00008472. No Clue if its made anymore but should be simple enough to…
Papierschiffchen als Deko zum Aufhängen. Das kleine Loch am Bug ist dafür gedacht, um ein Band zu befestigen an dem ein Anker hängt. Hier ein Beispiel, wie man den Aufhänger gestalten kann. Wenn es euch gefällt, dann lasst mir ein Like da.
This is like the Jacket on the 3D Chamber. Print in TPU Category: DIY
I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…
RPi 4 case. Can be mounted on any extrusion slot with M3 T-nut Can be oriented Vertically or Horizontally Here's the BOM to fully assemble the unit: Bill of Materials (BOM) Pi 4 2x M3 T-nuts 2x M3 x 8mm Socket Cap screws 2x M3 heated…
Andruckvorrichtung für Hammer B3 Winner Ich habe es jedoch an eine B3 Winner Formatkreissäge von Hammer angepasst. Mit diesem Werkzeug können Sie einen Anschlag festlegen, der auf das Sägeblatt der Kreissäge ausgerichtet ist, so dass Sie…
The silent box for Puffco Pivot, titanium tool edition. The modern version of the silk lined sigar case. It is print in place. I printed all these boxes in July 25, the box that contains my Pivot in the Reddit video, have been in use…
ESP32 Camera Clip Replacement made for the ESP32 AI Thinker module should work for other ESP32 modules too. Printed at 0.08mm Superfine. Printed and tested on my ender 3 v2 neo running klipper. adjust dimensions if the printers…
This is a simple spool holder for the flashforge creator pro family of printers. This works great with the Magnetic IDEX printers and the Akula-class motion system.
Offcet marking gauge Draw an offset line, perpendicular line Available in 50, 75, 100, 125, 150, 170 (max for A1 Mini), 200, 250, 300mm sizes. Starting from 100mm, shoulder is made bigger than the base (see pic.) Font - bahnschrift semi…
A stop for the FFC so that it does not get stuck in the support profile on the left of the Pandaplacer. Insert in the end of the support profile and fixate it with a screw and nut.
V slot cable clamp for FFC (Flexible Flat Cable) and IDC flat ribbon cablecrossing 2020 or 2040 extrusion. need this to keep my Geeetech LCD interface tidy and safe. Print two stand upright to go on either side of FFC to hold it. Print…
Stop losing your hot knife cap! Print the tether in TPU Insert the knife from the bottom into one loop, then slide it up. Insert the cap from the top into the other loop. I included my TPU profile for Polyflex TPU 95, but it should work…
Took cues from a few different designs. Narrow frame for older machines with the snap clips. Added filament slots and stops for the guide tubes. Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: No…
Turn any Puffco Proxy pipe into a flower solar pipe. For the bowl I use Cocktail Smoke Filters. They are stainless steel mesh came in 20 pcs on amazon. 2" ring magnet of some sort if you can find them is what I did. The dome 2" acrylic…
TTB-3d MK-5 Extruder Carriage for Flashforge Creator Pro and Duplicator4 printers (and similar style printers as well) I really liked the overall design by FrankenForge but wanted to clean it up and add my own touch. I have yet to print…
Elevate your gear with this sleek, minimalist Puffco Logo Keytag. Designed with clean vectors and a bold twotone aesthetic, this tag is the perfect accessory for your Peak Pro travel case, backpack, or keychain. This model is optimized…
This is a customisable riser for an FFC (flexible flat cable) extension PCB. This riser is intended for use on a Sidewinder X1 with either: the stock extruder assembly an aftermarket extruder assembly (such as the E3D Hemera). Please note…
Fatter sleeve case so it's easier to get the camera cable hooked up, an OctoPrint logo, and a stand that hooks onto the top of the FlashForge Creator Pro frame. OctoPrint logo by Janina Himmen see http://octoprint.org Lithopane by…
I have a puffco proxy and didn’t like laying the tool on the table.
The original design was created with the intent of modifying the case to allow external access to the SD slot and USB cable port. However, I don’t have any need for that, so I moved the board to the left allowing the usb cable to be…
This is a camera mound for a Microsoft Life Cam to mount on the side of a flashforge creator pro Category: 3D Printer Accessories
This is a remix...I just need to find the source on Thingiverse and give credit. I did my mods to this back in December 2016. Still needs fine tuning but I did successfully print flex filament a time or two with this drive block.…
Keep your glass mouthpiece attached to your puffco pivot! Print in TPU (TPU 95 profile in downloads) Insert pivot chamber into large loop. Stretch small loop around mouthpiece. I included my TPU profile for Polyflex TPU 95, but it should…
Pi Caddy with Tool Slots optional added from This Thing does not have all the same tool slots, added additional tools slots per my personal needs. There is a version with the optional tool caddy grooves and a version without them for just…
Dual Pico Hotend Carirage Adapter designed for the Flashforge Creator Pro & Duplicator 4 3D printers but should also fit Replicator and other Replicator clone printers. teaser pic here.. https://www.instagram.com/p/BOyXomyjB_Z/ UPDATE:…
Snapfit Y-Axis Motor Cable Chain Mount (FFCP, Dup4) (tool-less) I still haven't found the X-Axis cable chain mount I like but I modeled this recently and it fits very well, without tools. Insert an M3 nut and use an M3 bolt to remove the…
A simple holder for your Puffco Pivot. I printed this snap to hold it.
A simple holder for your Puffco Proxy. Works with stock glass and many custom cups, like my Magizle glass. If your glass doesn’t fit, please let me know. I may be able to adjust it or you can use the remix files. I printed this snap to…
A simple holder to display your glass for your Puffco Pivot. I printed this snap to hold it.
This is a Puffco Peak Pro desk mount that has room for a wireless charger sure many will fit but diameter is set for 87.5 mm. The wireless charge i used is a onn WIABLK00008472. No Clue if its made anymore but should be simple enough to…
A tidy station for the puffco Pivot and accessories. Features Include: Pivot Holder hotknife or tool holder Q-tip storage PEARL STORAGE and of course a spot to keep your concentrates
This simple yet functional weaving shuttle is designed especially for children's weaving looms. With smooth rounded edges and a lightweight form, it's the ideal tool to introduce young crafters to the basics of weaving and textile work.…
The silent box for Puffco Pivot, titanium tool edition. The modern version of the silk lined sigar case. It is print in place. I printed all these boxes in July 25, the box that contains my Pivot in the Reddit video, have been in use…
Elevate your gear with this sleek, minimalist Puffco Logo Keytag. Designed with clean vectors and a bold twotone aesthetic, this tag is the perfect accessory for your Peak Pro travel case, backpack, or keychain. This model is optimized…
This FFC guide provides protection for the FFC from contacting the edges of the sheet metal housing during install/removal and long term usage. Printer: Prusa Mini+ Settings: 0.4 nozzle, Prusa Slicer input shaper and variable layer height…
Gedruckt aus PETG, mit leichten Stützen.
🎸 Riffcaster Garden Gnome 🎸 Turn your garden (or desk) into a full-blown rock stage with the Riffcaster Garden Gnome ! This little legend doesn’t just guard your space — he shreds it. Few supports are needed. I used organic-style…
This is a “calibration” cube, which is slightly offset from 20mm by +/-0.5mm on the X/Y-axis and includes a tapered section from 19.5mm to 20.5mm in Z-direction on the top. (It actually prints smoother if you rotate it by 90°)…
This is a simple bracket for installing Bigtreetech octopus in a Flashforge Creator Pro. Probably also compatible with other printers that use a Makerbot Replicator Mightyboard. Bracket was designed to use standard M3 threaded inserts.…
I was asked to create this allowing for a battery pack to be stored in the base, as well as providing for a larger more robust design. Let me know if you need any tweaks to this!
