Liczymy pasujące modele…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
This is it, this is what I have been focusing on for the last month. the system is done, I am not making anymore adjustments at all. There will be more mounts there will be more options but tis is the base system in its glory. Hi I'm…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
This was a Human Rogue that I added a tail and horns to make it a Tiefling. Downloaded from: https://www.myminifactory.com/object/3d-print-human-rogue-200947
note that there is a V3 version out there... https://odysee.com/@c0ld\_d8rk\_h8nd:8 this design is taken from a: Rifling Mandrel-9x19-6gr-polygonal-1in9.82-Twist-8.82mm-Bore step file. this for the use for a 300mm barrel and this can be…
A travelling member of the Little Folk. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis seen in one of the images are available…
A tiefling female with a blade. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The tieffling…
This is my Tiefling Female Bard with a Fidle. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 . If you like it and/or…
6 tieflings (3 male, 3 female) for your tabletop needs
I wanted a wolf riding druid, so I combined a model from MZ4250 and Printed Encounter
This is a Tiefling Rogue I created on desktop hero then adjusted it with 3d builder.
this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…
A table top mini figure of a halfling archdruid.
Hafling Calvary! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have…
This is a new version of my Tiefling Rogue. I found the last one was easily broken so this time I included a piece of scenery to increase strength. That being said I also included very thin parts in her skirt and hood. On my resin printer…
Tiefling female wizard miniature casting fire spell. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit:…
Hello, I have for you a Garden Gnome, a halfling, a dwarf . Suitable for coloring. Amazing decoration for the garden. Very nice detail. Will protect the whole garden! :-) Good luck with the printing! I used PLA/PETG as the material. No…
Tiefling Bard dnd miniature. There are two file versions: one with a base and one without. I sculpted the model in Zbrush and scaled and rendered it in Blender. I recommend printing it using a resin printer.
A character I play in a regular tabletop game. The base is designed for standard one-inch squares. The rest of the model is larger than a typical miniature due to being of human proportion and shrinking that down to 28mm size makes legs…
The Shearforce PBCAR is a variable-mode rifling attachment platform inspired by the principle behind the Rexfire Akasha “Super BCAR.” Featuring an initial, more aggressive PCAR segment to pre-rotate the dart, followed by a gentler BCAR…
Halfling rogue dual wielding daggers. Miniature is designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. Have fun printing. If you want to support me and get access to my weekly posts, please…
Support me on Patreon! https://www.patreon.com/PrintedEncounter
A frisbee flinger is a handheld device designed to launch frisbees with high accuracy and speed. Take your frisbee skill indoors. Instead of hitting trees outside, break valuable stuff inside with the redesigned, recalibrated, recharged…
Changed to a lighter, cooler, sleepware top for the hot nights of summer
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Miniatura tema dnd di un halfling
This is my Goliath barbarian wielding a halfling barbarian wielding a battleaxe. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix/update of a model…
created this one using www.desktophero3d.com scale by 432.96% for Standard 25mm figures please bear in mind that there are 2 versions and the small rapier of the one barely prints on most home printing solutions Combination of the assets…
Halfling wizard smoking pipe. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please visit: https://www.patreon.com/cw/Umarty
tiefling bard in 28mm scale playing the mandolin with a sword at her side. Designed to print without supports on an FDM printer. Level of detail visible on photo is achieved by 0,2 nozzle and 0,08 mm layer height. If you want to support…
An update to my Tiefling Rogue from a Pathfinder game I am currently in. The previous model was improperly size so I had to redo it. This is now sized to be 5'1" at a 34mm scale or thereabouts. I can't say how well it will print on…
Tiefling fighter in 28mm scale wielding a great sword. Designed to print without supports on an FDM printer. Level of detail visible on photo is achieved by 0,2 nozzle and 0,08 mm layer height. If you want to support me and get access to…
A miniature for tabletop players showing a male Halfling, riding on a bear. The miniature comes in 4 variations: - without base - with round base (_rb) - with square base (_sb) - with hexagonal base (_hb) The model is 36.9 mm high.…
Another "Welcome to the Hellfire Club" mini - this time it's Dardew. Technically he's a fiend but I think he makes a great Tiefling bard. 👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models…
Based on pose of Z. Tsereteli's ballerina statue. I printed the supported model and uploaded a make. Print went well, support removal was easy. It really is amazing what you can 3D print these days.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Thanks to Ludodg for the initial design. V0.2 1/27/2026 Initial public beta release. Jig has been tested for printability. Successfully used to fletch 1 dozen of the following arrows with spider vanes Easton x10 Pandarus CA320 Elite…
3D-printable miniature of a Halfling Rogue character for Dungeons & Dragons and other tabletop RPGs. Created using an AI-powered text-to-3D tool and optimized for resin printing at 28–32 mm scale.
This is my take on a Tiefling Warlock. You might need to resize this model for your RPG needs.
To be greeted with stares and whispers, to suffer violence and insult on the street, to see mistrust and fear in every eye: this is the lot of the tiefling. And to twist the knife, tieflings know that this is because a pact struck…
Do you find yourself with spare mini marshmallows, M&Ms, wads of paper, and other small objects that need to be hurled across the room? Well look no further! Introducing the amazing FINGER FLINGER: the pocket-sized catapult capable of…
Note that this model, unlike the original, does need supports (at least for the horns) but it really deserves to be resin-printed anyway, Teirale's work is that good!
Made for resin printing.
Halfling paladin in 28mm scale wielding a great two-handed hammer. Designed to print without supports on an FDM printer. Level of detail visible on photo is achieved by 0,2 nozzle and 0,08 mm layer height. Edit: added version with thicker…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Halfling gloomstalker ranger equipped with hand crossbow and short sword. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please…
(18 June 2024: Minor updates) Open the file in Fusion360 and customize the user parameters. Experiment to find the best combination for your particular blaster. Then send the part to your slicer (in the given orientation) and slice with…
This is my take on a Tiefling Wizard. You might need to resize this model for your RPG needs.
This is my take on a Tiefling Bard. You might need to resize this model for your RPG needs.
Here is a really simple Tiefling Rogue. I applied my usual process to thicken the model and then went onto sculpting. I kept it around the 200k vertices mark so I didn't have to do a remesh at the end (aside from the usual quad). I paid a…
This is my take on a Tiefling Barbarian. You might need to resize this model for your RPG needs.
This model is derived from my Frisky Tiefling Dancer model, but with substantial enough changes to deserve a separate entry. For models are provided, all of which have been print-tested (see the Makes). The FIVE models are either based or…
[UPDATE July 18: I have no idea why the Prnitables Adminsitrator labeled this NSFW: there's no exposed “naughty bits” in any of the models. But there also seems to be no method of contacting the Administrator to find out what the problem…
Figure based roughly on FFXIV Viera but with shortened torso and heavier. Arms from the classical statue “The Violinist.” Horns, ears, and trident created in OpenSCAD. Hair is from Rolls Royce hood ornament. Tried to include the net a…
This is my take on a Tiefling Paladin. You might need to resize this model for your RPG needs.
This is my take on a Halfling Rogue. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
Materials needed: M3x4 set screws x2 M3x2 set screw x1 Description: I used to consider printed rifling a difficult, even impossible(if you pursue a good effect) task for FDM because of layer lines. So I made quite many SCARs out of low…
Based on pose of Z. Tsereteli's ballerina statue amd an anatomical drawing of a fruit bat skeleton. I printed the supported model and have uploaded the make. Print went well. It really is amazing what you can 3D print these days. [Update:…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
"Why hello there sir! Pleasant day, yes? Don't mind us... er... me, just an ordinary elf out for an afternoon stroll." What mischievous creatures, those halflings. Perhaps they are pulling some sort of prank, or entering a city were their…
My D&D character in the campaign I'm in acquired her long longed-for wings, so of course I had to create another new figure. I gave her two new outfit more suitable for flight: light and streamlined – and enchanted against wardrobe…
This is my take on a Halfling Druid. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
This is my take on a Tiefling Fighter. You might need to resize this model for your RPG needs.
OPEN-SOURCE, I have both .step and .stl files available aswell as my .f3d file Nerf rifling with options for 15, 12, 10, 8, 6 or 4 degrees of angle. Has ~12.55mm of crush Most options use 4 rows of 3 Options marked as compact use 2 rows,…
Made for resin printing.
Untested idea I had (Still waiting for parts to come in mail). Thought it could be nice to experiment with various accuracy inserts into flywheel cages (Various amounts of striation, degree, ID, smoothbore, length etc.), and I wanted an…
Here is a halfling wizard model set to 22mm height on a small base. I added a "Chonk" version which is an attempt at heroic scale with larger head/hands etc... and generally filling the 20mm baseplate via skewing and some sculpting.…
This is my take on a Tiefling Monk. You might need to resize this model for your RPG needs.
From the mind behind a myriad of projects he never got around to finishing comes… FroGolF! A tabletop game for 1 to Infinity-1 players ages 6 to 98½! Do you have a 3D printer, some empty table space, a roll of packing tape and at least…
A mini about a Tiefling Paladin for D&D. You can resize however you want for your own purposes. Leave a review to know what you want to see more.
Miniature request I've made for one of my patrons at https://www.patreon.com/roleplayingminiatures Come and join with the annual suscription to get a custom miniature request! Category: Games
Easy to print easy to paint optimized for 0,2 layer FDM HAVE FUN PLEASE SEE THE OTHER CREATIONS
This is my take on a Tiefling Cleric. You might need to resize this model for your RPG needs.
The idea of this device is to spin the dart using escaping air that rotates through channels out of the blaster to force the dart to rotate. In practice, it at least works decently.
This is my take on a Tiefling Druid. You might need to resize this model for your RPG needs.
This model is a mix of classic Greek statuary (legs, hips, arms) and a Rolls-Royce hood ornament (torso, head, hair). Clothes, slippers, daggers, horns, ears, and tail are made from scratch in OpenSCAD and Meshmixer. The latest revision…
Based on pose of Z. Tsereteli's ballerina statue. I really like this. You can make many things from the base model: a spellcaster, a School of Dancer bard, and so on. Update: I've added a version with palms up and a split skirt. The…
This is my take on a Halfling Cleric. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
Hello, Today i am uploading halfling necromancer in 28 mm scale. I made two versions, with and without skeletons - if you have problem with printing them or you want sorcerer instead of necromancer :) On the photos you can see miniature…
This is my take on a Tiefling Ranger. You might need to resize this model for your RPG needs.
This is my take on a Tiefling Rogue. You might need to resize this model for your RPG needs.
I am starting to get into Blood Bowl and found this lovely Scatter template from SIRBATS on Cults3d. Unfortunately there was not a throw in template to match and I like having completed sets, so I trace an image of the scatter template,…
Image generated via ChatGPT. 3D model generated via Meshy.ai
This Tiefling Warlock miniature features a horned spellcaster with flowing robes and arcane staff. The sculpt emphasizes bold robe folds and thick horn structures designed for reliable FDM printing. Magical effects are simplified into…
Strike from the shadows. Quick, cunning, and deadly, this Tiefling Rogue is ready to join your next adventuring party—or make life considerably harder for one. Armed with twin daggers and captured in an aggressive, low combat stance, she…
I would recomend halfing your printspeed if you like to print it in original size. Trust me the model looks way better, if you paint it ;) If you love this design and want to see more fun projects like it, consider joining my club on…
The Retiarius was a staple of gladiatorial combat. I haven't printed this yet, but with the Chitubox Basic supports in the supported model there were only 15 small islands that needed removal so I'm optimistic. I'll post a make once I've…
This is my take on a Halfling Warlock. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
This is my take on a Halfling Bard. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
This is my take on a Halfling Paladin. You might need to resize this model to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
Unlike my other halfling models I couldn't use my skewing/sculpting method for heroic scales so I've added a male and female version to this post. For FDM print on their backs. They are pretty solid so you shouldn't have issues removing…
My attempt to create Patrons for a tavern setting for RPGs. You may need to resize them to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
A mini about a Fire Sorcerer Tiefling for D&D. You can resize however you want for your own purposes. Leave a review to know what you want to see more.
Tiefling female fighter in 28 mm scale. This is the miniature from my Patreon post. If you like what I do and want to support me please visit my patreon and get access to all my miniatures including: Tiefling wizard and Tiefling rogue…
![[Updated July 12,2025] Frisky Winged Tiefling, crouched curvy female, flight harness](https://media.printables.com/media/prints/e37932ce-6f6e-4eea-a417-d1a81f6369ef/images/10202359_5ac55138-e592-4265-bb22-4b0ec78e2dd6_8de174ef-5a21-4083-b272-48076164f8c6/frisky-winged-crouch-r5-cover.png)
