36 modeli
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
I already printed a bunch of the The Ultimate Cereal Container Filament Drybox - Official Remix (2025) bases. I just want to add the rewinding feature to what I already have. Update V2: lower mounting slightly. See pictured 200mm spool;…
Improved remix of the original spool rewinder.
Was having an issue with the little slot for the spring snapping when under load so I reinforced it a little.
Sized to fit Creality Plastic spools, including the undocumented cutout parameters to offset the recessed hole. Parameters of the OpenSCAD file: spoolHoleDiameter: 56.4 spoolWidth: 66.0 spoolCutoutDiameter: 60.0 spoolCutoutDepth: 2.0
Remixed Lid to fit YOZOTI containers.
Premise The idea behind this whole endeavor was to use the new FS2026 system without having to waste filament on printing an entirely new lid or having to drill a hole into the box, and consequently being able to use the box in its…
I liked using the PC4-M10 Bowden couplers in the 2025 dryboxes and I wanted to stick with them. The JurB's remix used a separate piece that needed to be glued in, which I did not like. So I added threads directly into the lid itself.…
Overview I really liked the rewinding mechanism on the fs2026 dry box system , but didn't want to use so much filament to print out a new lid. I also already had a desiccant and hydrometer holder in the bottom of my cereal box containers,…
By request, this is an adaper support that mounts the 2026 Rewinder onto the The Ultimate Cereal Container Filament Drybox (2025) base. Top of the base to the center of the rewinder is 103.6mm, so it should fit up to 205mm diameter…
I really liked the Filament Storage 2026 solution by GunplaMark, and I’m a big fan of his work. However, living in Europe means the cereal container he uses isn’t commonly available here. So I set out to find alternatives that are easier…
Remixed lid base frame of the FS2025 Official Remix to achieve the following goals: Larger desiccant box Clear space under lid opening to use one of the many available cereal box caps instead of drilling a hole into the box itself It's…
FS2026-rewinder-nut with different offsets
Print with your slicer's default settings. No need of any support. Regular bread plastic bag expiry date plastic tabs work pretty well as lock clips. And you can also print the custom designed lockclip if you do not have enough or right…
This is a more universal fit because some of my hygrometers have 30 degree tabs. Hole was moved down so sides do not get too thin with the new tab cutouts. I also created a version with an NFC tag holder above the hygrometer. Some of my…
I wanted to create my own custom primary flight display for mfs2020. On my Youtube channel, I'll take you through the assembly steps and walk you through the coding part. Over time this will result in a fully customizable and modifiable…
I added a small extension to the latches, with an offset, to make it easier to unlatch the bin.
part for https://www.printables.com/model/1606655-filament-storage-2026 Printed the lid ripped it off the build plate and the latch was still on the plate. so with the magic of 3d printing 5min later a replacement latch is printing…
I wanted a Smartthings controllable outlet for my treadmill but couldn't find any self-contained 20A-rated devices save for the Linear FS20Z-1. Unfortunately that product assumes that you'll be wiring it inside an electrical box so all…
Add contrasting-color arrows to the FS2026 rewinder without an AMS, MMU, filament swapping, or mid-print pauses. The nut and interface print normally in your main color, while the arrow inserts are printed separately in any contrasting…
Halo MA5C assault rifle body kit for the F2000 and FS2000 airsoft AEGs. Parts: Grip, Muzzle (14mm CCW thread), Top Rail 01-08 (numbered front to back - these are the parts that go on the rail). Hardware: M3 screws to lock the parts down /…
Halo MA40 assault rifle body kit for the F2000 and FS2000 airsoft AEGs. Parts: Flash Hider (Pt1, Pt2), Hand Rest (A, B), Top Rail (6 different segments, numbered in order). Hardware: M3 screws to lock the parts down / pin them to the…
U need to buy 25mm metal or stell ball and 8x8 neodyum magnets, this project is remake of this VR Flightstick for meta quest 1 2 3, VTOL VR Grip by JavierSmith - Thingiverse u need 25mm ball made of steel or metal and 8x8mm neodyum…
Calibration ring to put into a heating valve motor. Just adjust Z-height to your needs in your slicer. (The STL is 1mm) Category: Replacement Parts
Replaces the original spacer for a ca go FS bike. Requires a M6x25 and M6 washer for mounting. The inner hole is a bit tight. But helps installation, because the spacer holds on the screw.
Siemens Sinteso FS20 Fire Panel Safety Holder
Spool Adaptor for Filament Storage 2026 by GunplaMark for Fusion Filaments plastic spool. ID 57 mm width 66 mm.
Parameter 54.7 mm and 66.5 mm for the Refill-Spools: and: Made with the SCAD-File from GunplaMark (Thank You)
I used the Scad model of the spool adapter and modified it to fit the Smapmaker spool so it would fit in the FS2026 container
I already printed a bunch of the The Ultimate Cereal Container Filament Drybox - Official Remix (2025) bases. I just want to add the rewinding feature to what I already have. Update V2: lower mounting slightly. See pictured 200mm spool;…
Was having an issue with the little slot for the spring snapping when under load so I reinforced it a little.
I added a small extension to the latches, with an offset, to make it easier to unlatch the bin.
Remixed lid base frame of the FS2025 Official Remix to achieve the following goals: Larger desiccant box Clear space under lid opening to use one of the many available cereal box caps instead of drilling a hole into the box itself It's…
Sized to fit Creality Plastic spools, including the undocumented cutout parameters to offset the recessed hole. Parameters of the OpenSCAD file: spoolHoleDiameter: 56.4 spoolWidth: 66.0 spoolCutoutDiameter: 60.0 spoolCutoutDepth: 2.0
