Liczymy pasujące modele…
Originally published here: Motorola Moto G72 G82 & Edge (2022) xt2205 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay…
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
Saw there weren't many printable options for the PG7 gland used for CAN BUS. I instantly though of sprongos. You have to run a blade to separate the helix cut. It's pretty shallow. You might want to put a dab of super glue at the…
◆ Redistribution of this mod, sale of products/commission using this mod is prohibited. (If you want to do, please contact me.) I am not responsible for anything that happens using this mod. This mod may require post-processing depending…
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
Mirrored version of @RedWish's EBB36 PG7 Mount behind NEMA14 stepper
does not need supports nor a brim to print it.
A box to store your Dexcom G7 Overpatches
Mounts tilted between spacers from: https://github.com/chirpy2605/voron/tree/main/general/PCB_Mounts/STLs/G2SA
This is compatible with the “ Official Creality Ender 3 X-axis MGN12C Linear Rail Guide Kit ” that can be found on online retailers.
Spona proti rozevírání plastových okapů Marley RG70 Material: ASA, ABS, PETG
Ladestation für Dexcom G7 mit Platz für Winkelstecker/-adapter. Durch den zweiteiligen Aufbau ist ein Druck ohne Stützen möglich. Die Teile werden mittels Schwalbenschanz verbunden. Bei 14.4mm empfehle ich eine Pause einzurichten, um den…
A kitbashed ABL mount that uses the left fan mount location
TLDR - HeroMe Gen 7 and Phaetus Dragonfly BMS are great until you need to get to the bowden tube and fight with that little clip. This bypasses that, constantly holds it in the release position, and secures the tube with a PC4M10 coupler.…
Gridfinity storage for Logitech G703 mouse with the slots to put in the extras, USB dongle, weight and the adapter
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
Overview A while back, the scroll wheel of my G703 failed - it spun freely but no scrolling would register. Opening up the mouse to take a look revealed that the left-side axle of the wheel, which sits inside of and spins the rotary…
EBB36 Can Board Mount IGUS Chainflex Mount w/ PG7 Threads. Pairs with: Umbilical Rear Passthrough Recommended to solder your molex terminals after crimping. They just need a tiny dab. Solder with the terminals facing up in the air so the…
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
PG7 Gland mount for the ebb36 on the lgx lite. BOM: 18MM STANDOFF x2 PG7 Gland with cable relief x2 (milage may vary depending on build)
because heat sets BOM: - 2x M3x6 BHCS - 2x M3x5x4 Heat Set Inserts (Voron Spec)
this was patched together from 2 files…i made it in mins so it sucks…. but the one i found wasnt actually for pg7 it was too small…
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
Mouse case consists of base and cover. Magnets are used in this model 5mm diameter 5mm height 4pcs for cover 5mm diameter 2mm height 4pcs for base (pause necessary to insetr magnets) CHECK POLARITY BEFORE PUTING MAGNETS IN PLACE Test…
You will need 2x Standard Heatsets and 2x M3 x 12mm SHCS. The Parts should be printed in the orientation shown in the image for optimal strength Note the Standoff and Spacer are unchanged from the original design
This support allows the use of a PG7 cable gland on the StealthBurner toolhead when using the SB2209 CAN board, providing a cleaner, safer, and more reliable cable management solution. The design properly guides the CAN cable, reducing…
Variants of the parts by Ilyas Sofian. - Lighter baseplate with cutouts - Comfort groove on the mouse clicks. Also 1mm extended for more travel clearance. https://www.printables.com/model/811624-logitech-g1008-mod-g703-shell-g305-pcb
Requirements: 1x M3 countersink ± 10 mm (lock ring) 2x M3 screws to adjust/reduce the default wheel angle of 35 degrees as required (Make sure the screws are nicely flat where they touch the angle bar) Needle file for finishing…
..if The Rock was a toolboard mount. use auto-orient and its pretty much done. both parts are in the same model, so take that into consideration when importing the file to slicer. 04.02.2026 update - increased the depth of mount holes…
Some Logitech mice are known to develop scroll wheel issues over time. The pin/rod that rotates the scrolling mechanism inside gets worn out after a while and starts skipping. I used to buy replacement wheels online but they also tend to…
So, this is for the atomman g7 pt pc, many people have been complaining about the stand that it comes with, so I made a different one! Soon, I will upload a variant that has the text removed!
To hold the lid shut, i used the tiny magnets from Dexcom G7 Sensor applicators but you can also get a bunch of 5 x 1.5 mm magnets on AliExpress. For the hinge bolts i used the threaded ends of 2 mm bicycle spokes. I mounted them by…
PG7 cable gland mount for the fourth toolhead on Voron 2.4 Stealthchanger to match the position/height of the other three toolheads using standard Clockwork2 extruders and @CstmCreations_174350 's PG7 mount. Hopefully this saves someone…
A replaceable headband for the Logitech G733 Headset. Uses a one piece design. printed with Polymaker TPU 95 on Prusa Mini w/ Supports. Remix the headband to fit your head, I have uploaded a STEP file to reference the mounting slots and…
Overview A while back, the scroll wheel of my G703 failed - it spun freely but no scrolling would register. Opening up the mouse to take a look revealed that the left-side axle of the wheel, which sits inside of and spins the rotary…
Open and lock slide lcd cover
Exhaust filter grill with PG7 cable gland threads for the Filter X upgrade.
I was having trouble with the thread on the original model so I redid it in Fusion 360
Accessory trays for Philips MG7720/15 - MG7745/15 shavers
PG7 Gland dual mounting plate with integrated drip ring for use on bottom of project boxes. 12.5mm holes spaced at 26mm. Edit Added single version.
Air Conditioner Remote wall mount for Midea RG70E/BGEF RG70E/BGEFU1
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
a screwable mount for the umbilical cord with relocated y-endstop
Ideal print orientation is tread face towards the bed, but flat side down should be okay too. Cable exit is intended to place the wire inside the vertical 2020 extrusion. Use m4x10 - m4x12 screws to hold it in place. Support me on ko-fi.…
Sketched this up and changed out my spring instead of setting up an electronic boost controller. Didnt have time to wait for a stamped steel wrench to be delivered in 4 days at a rate of 45USD for standard shipping. This one has the added…
Philips Multigroom Accessory Caddy Model MG7735 + Accesories slot
Mounts a pg7 cable gland to the trident frame that feeds directly into the extrusion t slot. Added the Archetype logo for added style points.
I wanted a rear exhaust that worked with CPAP and also had a HEPA filter + carbon pellets. This is my solution to my own problem. Please let me know if you have any troubles printing this model at all. I haven't tried this design out for…
Mounting bracket for umbilical with a PG7 mount for Stealthburner / Clockwork 2. Puts the end of the cable in a reasonable spot for an LDO Nitehawk SB. Easiest to print upside down.
I needed a PG7 Mount for my Voron 2.4 Formbot Kit which came with an umbilical setup. Since I feared that the sharp endings of the piano wire would scratch through the isolation of the canbus cable when used on its own I decided to put…
11.04.2026: Added a new version where the part can be printed in two separate models.The print direction is better for stability of the individual two models, so it will not break again. The inserted pin should be printed in 98% size,…
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…
I have remixed tetsu97 's umbilical mount for G2SA with PG7 fixing point by moving it to the right. Added channels for zip-tie that is meant to secure the umbilical cable. The stl is print oriented and includes sacrificial support (in…
Some days you need to cover your CGM for safety, and some days you have special occasions and want to bling them out. I've printed these for both reasons and gifted a few to the kids I coach. This works in both PLA and PETG; it does need…
I remixed the original A motor cable cover with PG7 threads in order to attach a PG7 gland for umbilical setup.
Remix of Modified Voron Exhaust Filter by Michal Kelnar to add a option for PG7 *New to CAD but did my best* tried to line up the fitting best I could to keep in aesthetically pleasing from both sides so there is a slight offset.
A holder for Marley Gutter RG70. It has a 20° angle. Has to be printed with support (Best treesupport)
Cap that's been modified for PG7 grommets
The battery life of my Logitech G703 Hero started to decrease, so I wanted to change it, but I could not find a 240mAh replacement, so I bought a 1000mAh one (CS-LOG900SL). However the battery housing of the G703 Hero is designed for a…
Replaces cablechain with PG7 gland for umbilical. Most other mounts infere with Z-cablechain. This mounts cable gland on the side of extruder motor, using minimal amoun of valuable Y dimension. No need to remove Z-chain. As sturdy mount…
Print with support if you don't want to cut part of the connector. Works well without cutting. If you cut and print it please send a picture :). Good prints for you guys.
I recommend adding a chamfer the bottom to get a good seat. Print Settings Layer height: 0.2mm. Extrusion width: 0.4mm, forced. Infill percentage: 40% Infill type: grid, gyroid, honeycomb, triangle, or cubic. Wall count: 4. Solid…
This Remix have more stability and fits perfectly for my PG7 with M12x1.5 thread. Fits with Fly SHT36 and EBB36 Canbus Modul. Use 2x heat inserts to screw the PCB: https://amzn.to/4gj21lk Screws: https://amzn.to/3Zqkgie
◼ Voron Trident (AK Stealth Wires) PG7 mount bracket Mounted on the corner of a Voron Trident to hide the CANbus wiring inside 2020 extrusions for a stealth look, created as part of the AK Stealth Wires project. Learn more about the…
auto oriented and printed with with organic supports. .2mm layer height out of abs. I 3d scanned my manifold and made this insert that fits onto the intake port locations. I then used a harbor freight vacuum alongside a harbor freight…
I wanted a pg7 mount to route the cable out behind the stealthburner, horizontally centered on an enderwire (switchwire) build. The pg7 cable does not run into the vertical extrusion on either side and is a decent route to push the…
I made the poles beefy and can handle a lot of mangling, Plus a PG7 Connector. I'll update if it doesn't fit the connector. *I've printed the Tall/Non-Short One & It has a huge gap to run a cable vs. the Short might not Make sure to…
PG7 Gland Adapter for EBB36 Mount that works with any of mine EBB36 mounts. Just print it with any ABS filament with usual Voron print settings.
I had to design new PG7 mount for my Galileo2 Extruder on my Voron 2.4. I have Galileo extruder with TAP and scrab brus on the end … me previous mount https://www.printables.com/model/877290-pg7-mount-for-galileo2 was working just fine…
Made a quick mount for BIQU microprobe v2. Was hard for me to find a good solid mount so I just made up my own real quick let me know what you think or if you have any ideas. This one is setup for m2 heatset inserts but I can upload…
BOM Printed part 1 x 1 Printed part 2 x 1 Pan head self-taping screw M2.5x6 x 2 I want to use existing mount designs but my Voron 2.4 kit didn't come with PG7 cable glands and I don't feel like purchasing any. They're easily printable and…
Needed a mount for my umbilical cable in the corner. I am using 2040 brackets and found the original mount, which only works with M4 screws. The screw holes are enlarged to work with M5 BHCS. I mirrored mine in the slicer, since the 2040s…
Originally published here: Xiaomi Redmi Note 8 Pro m1906g7 case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8 Pro , which model number starts with "m1906g7", it will not work with Redmi Note 8 T or the regular…
Just a simple clip-on stand for the Trust Trino webcam. One of the file is just the clip, if someone wants to customize it. Print this object on the side with support everywere with top/bottom clerance of 0.05mm, 3 perimeters walls and…
Hi Logitech Friends, If you’re reading this, it’s safe to say you love your Logitech G710+ keyboard and aren’t ready to part ways with it just yet. However, as these keyboards age, the keycaps tend to become brittle and prone to…
Quick and dirty remix to allow for smaller cables to be sorta slotted inside as well.
This replaces the cardboard plate from the original vacuum cleaner bag. You need to remove the paper plate and the foam ring from the original bag and glue both to this new plate. Compatible with Kabum 900 or liectroux g7.
For single toolhead running CAN w/ PG7 cable gland
2022-02-25: Added a “split” model which uses two pieces instead of one. Print time and filament use is cut in half while stability remains about the same. My organization decided to standardize all of our laptops to be a HP Zbook Fury 17…
I designed and made this to get my laptop off my desk. I do not need to access it as I connect to a HP USB C Dock. The USB-C plug fits into the mount so it lines up with one of the USB-C ports. I can then slide my laptop into the mount…
Voron V2.4 Canbus Exhaust Filter Mod for M12.5 PG7 cable glands. Supports on the rear side thread pg7 would be ideal. Sag from print orientation make it much tighter Fixed threads thanks to @KevinKunst_286112
Storage compartement for the Dongle on the Logitech G703 mouse. Uses the original magents from the original mouse.
This is a great PG7 mount that worked well with my BTT SB2209 RP2040 board since it it out of the way from the connector, however I'm also using the BTT CANBUS cable (the one with the pre-molded XT60+2 connector on it) and there was no…
Designed for better seal (3mm foam), umbilical through PG7 and PTFE through PC4-M10 connector.
Another PG7 Strain Relief to use for umbilical based on https://www.printables.com/model/1077552-pg7-mou by Enderman Prints. This remix changes the position of the PG7 thread making it more central. The hole is open and allows to use an…
PG7 Gland mount for the ebb36 on the lgx lite. BOM: 18MM STANDOFF x2 PG7 Gland with cable relief x2 (milage may vary depending on build)
Actually not a remix but a remodel based on this because the original file was a bit sketchy. Heavily reinforced and added longer posts to fit both the 24" and 27" (and similar) models. Print Settings Supports: Yes Infill: 50%
I wanted to provide mount points for an umblical for a BigTree Tech CANBUS installation. BTT provides a cable bridge for the Clockwork 2. It was an easy matter to attach a threaded boss that would accommadate a PG7 cable gland. The cable…
CAN Cable holder for a PG7 strain relief compatible for the Stealthburner toolhead with the Galileo2 extruder and Big Tree Tech SB2240 / SB2209
Added an extra screw for the XOL carriage to drastically increase rigidity
A shortened version of this great design Printed with VORON Specs with Sparta3D ABS
![[Heat-set] PG7 Gland Adapter for EBB36 Mount](https://media.printables.com/media/prints/fe8e5fba-0bc8-4c4f-bec9-1c748b11de5b/images/9322507_12776c26-cce0-468f-88ca-336265715061_1a417b2b-bc76-4aee-bab8-5a3d21de6b46/photo_5123123401572069014_y.jpg)
