Liczymy pasujące modele…
NO, THERE IS NO WAY TO GET A LICENSE TO SELL THE BOX COMMERCIALLY. MY DESIGNS WILL ALWAYS BE FREE FOR NON-COMMERCIAL USE ONLY. PLEASE STOP ASKING! The design is based on the " Tool box parametric " by Yanev and provides some more options…
For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…
I was messing around with a twisty fidget egg and the next logical step was clearly a twisty fidget dragon egg. I am no good with blender, and found the awesome solid dragon egg modeled by Tony Youngblood here: At that point it was just a…
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
This is a large threaded egg. It was designed to be large enough to hold one of McGybeer's articulated dragons (printed at the default size). Looks particularly good in multicolor coextruded filaments. It will print OK without supports,…
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
Design for Large eggs (60mm). Choose between 12 or 18 eggs size Fits on PrusaMINI bed After print you could remove the center column. Check some of my paid model at: https://cults3d.com/en/users/Cisco3D/creations Important : IF YOU LIVE…
*** Free to print, NOT to sell *** Thanks to sunset and sunset_3d_design for uploading this great model! UPDATE 12/11/2023: Added v9.5. Fixed the fused segment from the new PrusaSlicer updates. I moved the “Spikey” models into the archive…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
A small box in the shape of a scaled dragon egg with a hinge and latch that snaps shut. This is a remix of Tiny Dragon Egg Box by GreyFluffs and Dragon ornaments by Syxiaolu94 with some modifications to make them sturdier, so that it…
This fidget toy is a tiny, clicky toggle switch! It's fully printable in about an hour and is only four pieces. You can change the "snap" effect by using either spring option and/or different materials. Want to sell prints of this model?…
Modern and fun Easter Egg with bunny ears. Easy print and great for spring/easter decoration. Large egg has a big enough hole to fit a tea light, and when you used a light or transparent filament you will be able to see the light shine…
If you like this fidget toy, check out my improved 4-button Quad Toggle fidget ! PopKeys is a “toggle” fidget with a mechanical twist… Pressing any key will release any/all other keys. Pressing the key down far enough will lock it down…
🌀 Description The Spiral Fidget Egg is a satisfying print-in-place 3D model designed for smooth, relaxing movement straight off the build plate. Its helical structure allows the inner parts to glide along the spiral path, creating a…
Printed in PETG for slight flexibility needed around the locking ball hinge when assembling. Please read the comments of the parameters before changing them to prevent failures in the design. If you remix this design, please link it. I…
Egg dispenser hold 10 eggs from S to L sizes (up to 65x45mm). Print recommendations: Filament - PLA, PLA+ Layer 0.2mm, 2-3 Walls Infill 10-15% With Brim 5mm The Support is not important.
Update March 30, 2024 -- more sizes uploaded . On request, I've uploaded more pre-rendered 4x4 and 6x4 box model files. There are no changes to the source model or any of the existing model files. Enjoy! Description My Rugged Storage Box…
Egg dispenser. Add model for bed 256x256x256 type bambu. 3110_Bambu dispenser eggs.3mf New model with solution break eggs https://www.printables.com/model/1223603-2025_dispenser-rotary-egg New model 2025…
Hello! I present to you my articulated dragon model. Its print in place and require no supports . Made with a use of Blender. I encourage you guys to post a make after printing. Im curious of your filament choice and the print result!…
Print-in-place and Articulated Surprise Egg #4 - Tiny Excavator 'Making of' video: Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock…
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model. Update 12-09-2025 - Added internal model !! Prototype !! Magnetic version to be used inside, if you want to use the internal spool holder…
This is an egg. The dimensions of the egg are 43 mm x 43 mm x 55 mm, which corresponds to a standard chicken egg. Works well as an Easter decoration or nest training egg. Recommended print settings fill density: 10% brim: yes perimeters:…
Versatile drain cleaning tool available in three lengths—15cm, 20cm, and 25cm—designed to effectively unclog and remove hair and stubborn debris from (drain) pipes. Works with most filament types, provided they aren’t overly flexible or…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . After much trial and error, I…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). Update: In the meantime I also created a version…
I really like the Gridfinity Case by Aiko since but the the model is extremely resource hungy - without any sacrifice in functionality or robustness I shaved down everything to yield about 33 % savings and added a list of other cool…
Info: I have taken great original model from @OneIdMONstr (thanks!) and had an idea how to make bigger alien facehugger which is still fully print-in-place bent tail & fingers allow: much longer tail (tail has 41 particles, instead of 11…
Each variant is optimized with dedicated print profiles to suit different filament types: Basic filament for standard materials. (PLA Basic) Matte and silk filament to accommodate the increased friction of these materials, ensuring smooth…
Print-in-place and Articulated Surprise Egg #7 - Tiny Car Carrier 'Making of' video: https://youtu.be/lOENd-wVnmA The cars and the egg was each designed to be printed in place without any support structures. The Car Carrier do have…
This is a unique spiral Easter egg! It consists of two parts that interlock by spiraling into each other. This innovative design blends functionality with aesthetics, adding a fun and modern touch to the festive atmosphere. It's the…
The cam-latch closure on my original rugged box is still the toughest 3D printed box closure of all, but I know snap closures are convenient too. I made this extra tough snap closure, which will not break because it doesn't rely on layer…
Print in spiral vase mode or normal with 0 top layers, 3 bottom layers, 1 wall. In normal mode you can use infill and print the eggs solid if you want. I printed in vase mode. Each egg file is solid and approximately 55mm wide and 70mm…
The box is parametric using gridfinity units. Added lids to ensure small parts are not mixed up in multi department boxes. Lids and Baseplate can be suppressed if needed. Parameters: Baseplate and Lids can be suppressed: Bodies to export:…
Print-in-place and Articulated Surprise Egg #6 - Tiny Jet Fighter 'Making of' video: https://youtu.be/hjCWHOE4sb8 Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. Both the jet fighter and the egg was each…
Print-in-place and Articulated Surprise Egg #1 - Tiny Haul Truck 'Making of' video: *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock (fits 3x1mm, add a drop of glue) Stresstest your 3D Printer by printing this tiny…
There are two versions of the facehugger. One simplistic design that fits more the flexi-family and one more realistic design.
Spiky Sensory Trigger Twisty Spiral Roller This Spiky Spiral Fidget Roller is engineered for dynamic sensory play, featuring tightly patterned geometric spikes that wrap around a twisting core. As it rolls, extends, and shifts in length,…
Print-in-place and Articulated Surprise Egg #5 - Tiny Fire Truck 'Making of' video: https://youtu.be/LYwZcH8kKiw Stresstest your 3D Printer by printing this tiny collectable stocking stuffer. Both the fire truck and the egg was each…
A major capacity upgrade for your egg storage: This is a Double-Track Remix of the popular egg dispenser. Based on the concept of a single gravity-feed egg trough, this design doubles the number of tracks, allowing you to store and…
I saw other mario boxes but they were hard to print because of the fillets on the edges. This box is to organize youre money so you don't have it laying around everywhere. To firmly close the lid you'll need 8 magnets. Size: 6X3mm For the…
Modern easter egg decoration. Large egg is compatible with tealight (use light or transparent filament. Both sizes should be printed in vasemode. The large egg is 129 mm tall and the small one 90 mm. If you want to support me or get…
Meet the ultimate “Highland Cow” : big horns, bigger fluff, and a fringe so long it’s practically a privacy policy. This chunky, seated Highland cow is sculpted with flowing fur, a boopable snoot, and soft, rounded hooves—perfect as…
Using a flexure spring and an over-center mechanism to create the classic toggle switch in an interesting way. Shouldn't need any lubrication, but like all mechanical prints, it can benefit from a little oil, wax, or soap in the joints,…
A remix of a remix - a Unicorn PiggyBank. As is 18cm high, I printed this for my niece in Geeetech Silk rainbow PLA (together with another model to ensure sufficient color changes. Came out nice although the chin overhang IS challenging…
Squid Game Gonggi No needed support
Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…
This is a Dragon Egg Storage pot held together with 12 magnets (3mmx2mm). Magnets I made it a while ago, and was pleased with how it came out, but I haven't done anything with it so have put it on here for others to enjoy. I printed it…
This is a remix of Chewey 's deburring tool case and Whity 's parametric rugged box. It has an insert construction in the style of PjotrStrog 's Multipart Pinecil case. Like the original, this case fits a 150mm length tool from tip of…
Designed to print stones and white pieces separately for those who don't have AMS. Tight tolerances so make sure you have calibrated material settings.
Holder for Kinder Surprise egg in model of “Rabbit” Nice decoration and present for kids for Easter. Created 2 versions Model 1 - model as 1 part Positive - printed faster Negative - possible support needed Model 2 - model separated to 3…
A Minimalist Skeletonized Dagger. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5 0.825…
Printing & Assembly: Print the box in one piece (lid and bottom together). After printing, snap the latch into place. Sealing is optional.
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). There's also a version which has more shallow…
Print-in-place and Articulated Surprise Egg #8 - Tiny Racecar 'Making of' video: https://youtu.be/DxNNB9PW3\_0 This is not the most complex Surprise Egg I have made in this series but it sure is the smallest :) The racecar and the egg was…
I need to print many of them without hollow. So I remixed it
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
Print-in-place and Articulated Surprise Egg #2 - Tiny Fork Lift 'Making of' video: *edit 04.14.22 added high-poly egg and a high-poly egg with magnet lock (fits 3x1mm, add a drop of glue) Stresstest your 3D Printer by printing this tiny…
Hallo Das ist meine Version eines Eierspenders. Es passen etwa 16-17 normale Eier rein. Es hat auch Platz für grosse Eier! Einfach zusammenkleben, die 6 Bolzen nicht vergessen. Masse: 282mm x 180mm Hello This is my version of an egg…
UPDATE 12 November 2023: I've received a consistent handful of messages from people who have been downloading the wrong original files so I've reuploaded the correct lid/seal files here as well. UPDATE 13 July 2023: Added a version with…
Very easy print with 2 options to print (* see also update) : Print-in-place version with the ball. Shake the ball loose after printing (or pause just before printing from the bottom of the treat compartment and break it loose). Version…
Revision – February 8, 2024 While creating my Gridfinity Rugged Storage Box , I've made some updates to this model. New features: New draw latch option New top opening grip and hinge end stop options Changes: The default required screw…
2 brand new free Easter egg twist fidgets Choose between the twisted egg or the colored egg… or both! Fully print in place with no support required and no brim necessary with zero infill for little waste, both are suitable to fit on any…
🔵 Piggy Bank 🔵 If you have any coins, the best way is to feed this piglet. ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can look forward for. ■ YouTube ➔ https://www.youtube.com/c/MrHanjak2017 ■ Video 🔷 INFO 🔷 ■ Steel…
This is a Screwless, parametric, sealed, storage box. The Alround Box MINI: https://www.printables.com/de/model/851837-rugged-storage-box-mini-parametric-screwless The box is assembeld with pieces of filament, so screws arn't needed…
Update 16/3/2025: Each model is now labeled with its size! Insulation Cutting Tool – Perfect for Plumbing Projects This versatile insulation cutting tool is available in 11 sizes, ideal for different plumbing needs. The sizes range from…
introducing “TANK” the small but heavily rugged capsule/container for any kind of outdoor usage. waterproof against rain when using O-ring with dimension 3.5mm x 31.7mm (ID). I have included some STL- file of such ring for reference but…
There is one main screen housing design, multiple mounting options. The Front mount is compact and needs fewer parts but is at a fixed angle and can be low for taller people. The Rear mount takes up more space and uses more parts, but the…
Egg holder-egg box-egg stand with changeable sign for MHD/BBD m With changeable compartment to insert small pieces of paper to write down the expiration date. Always fresh eggs, thanks to this dispenser, fill the dispenser with up to 10…
Game of Thrones dragon egg, now hollow and threaded for putting treasures inside! Printed well at .1mm layer resolution, unless scaled up in size. The threads are very fine, so YMMV. Print settings: Material: PETG Resolution: 0.1mm…
This assembly is for adding scales to your Gaggia Classic or Gaggia Classic Pro. Compatible with two HX711 boards or Vas' dual HX711 board. Requires 750 g load cells. Please use the assembly instructions at gaggiuino.github.io…
https://youtube.com/shorts/Ss0iSEgnsyo Stresstest your 3d printer by downloading and printing this tiny print-in-place Surprise Egg for free! Both the dump truck and the egg was each designed to be print-in-place without any need for…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I needed a hollow, two-part,…
XY Size Compensation on the Inner Piece at -0.4mm
Fridge magnets are great but I don't like that most of them put the magnet dangerously close to the finish on that expensive fridge and removing them to put up a new note or change a picture can be a hassle, if your hands are full. This…
The case is based on my parameterizable " Rugged Box ". A GoPro 8 version is available here . Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order…
This is the improved version of the original "EGGROLLBASKET". Walls are thicker, the construction is more solid and the model is easier to print. G-code is prepared for Prusa Mini. NO SUPPORTS NEEDED!!!
Summary Easy-to-print and without supports printable buddy in the form of an easter egg bunny. I hope you like it! Print no supports! 0.2mm layer height or lower 15-20% infill Postprocessing Be careful when removing them so as not to…
This rugged box is a remix of the ‘Tool box parametric’ by Yanev. UPDATE 2024_03_31 - I combined both the main box and lid into a single .f3d file so now only 1 set of parameters needs modified and all parts will adjust accordingly. This…
MODEL DETAILS A golf buggy style 3D printer benchmark test. Based on E3D's onsite transport! Influenced by the design of the classic 3DBenchy, the E3DBuggy is a quick print designed for benchmarking your 3D printer. #E3DBuggy Post a make…
I made this dragon egg and dragon with an articulated tail completly in tinkercad. I can say this was a very pain staking project. I had to resize, angle, and add each scale individually to the egg, this actually pushed tinkercad to its…
My wife bought ceramic ornaments like these for our daughters to paint. Unfortunately, they didn't grip the rim of the pot very well and were very fragile. I decided to see if I could make something better. Be gentle, this is my first…
Grogu and Vader will need support, the others should be fine without. Enjoy your egg! Also see Part 1 of the collection: Star Wars Egg Cup Collection
These baby chick and egg layered fidgets are the perfect little additions to any Easter basket 🐣 I have included the following STL files for printing: (1) Baby Chick Layered Fidget (2) Round Egg Layered Fidget 3D PRINTING SETTINGS Layer…
This is a remix of the awesome Joe's V4 spray handle , which is a remix of thefilamentcorner I removed the logo from the sides Print at a high infill % - I used 70% and its feels very solid. It fit all the spray cans I have laying around,…
Notes: If you want to use this with an Arduino Nano build in a Gaggia Classic, please also print the Gaggiuino Optocoupler Case There are now two accessory parts: A stripboard mount and cable strain relief (see changelog). The stripboard…
Thanks to @TonyYoungblood for the original dragon egg model here: https://www.printables.com/model/173584-solid-dragon-egg-remix-of-my-threaded-dragon-egg. UPDATE : I fixed the .stl and .3mf files and tested in Bambu Studio 1.5.0.61,…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
Squid Game - Osselet Set [Updated] Ready to Print Squid Game-Inspired Jacks Game (Osselet) from Netflix Dive into the thrilling world of Squid Game with our unique jacks game! Inspired by the intense challenges of the hit series, this…
Print-in-place and Articulated Surprise Egg #11 - Tiny Harvester 'Making of' video: https://youtu.be/szbpNGrIUOU The harvester and the egg was each designed to be printed in place without any need for support structures. The harvester…
It's ~40cm long in total, which seems to be the typical fridge depth. It works, mostly. I did model it from scratch, specifically to adjust the tile angle and fiddle with the supports. Sometimes they rotate while falling and jam, not sure…
Build instructions are identical to the original Rugged Box using same hardware. -Insert M3 bolts through bigger holes(outer) and thread into smaller holes(inner). -Latches are a single object. Use cut tool in slicer to separate them and…
use supports my Creality Ender V3 KE print speed settings in pictures 1 mm version – ❗fast printing without supports can cause oscillation and shifting of layers, see photos added version with 2mm wall (better printing) added more…
Just a simple remix which removes a little from the top and bottom to allow for easy vase mode printing and turns it into a great plant pot! I have found that printing with a 0.8mm or 1.0mm wall at 0.2mm layers gives a really solid feel…
Custom Rugged Box OpenSCAD What This rugged box is loosely based off “ https://www.printables.com/model/258431-rugged-box-parametric ” but completely written from scratch in OpenSCAD. So, it can be customized either in the OpenSCAD…
Little doggo modelled after a beagle. Lovely to fidget with and shake its tail! Print on 0.6 or less or the tail will be fragile!
If you like my stuff please consider buying me a coffee https://ko-fi.com/philm 3D printable replacement chassis plate for the popular 4WD Arduino robot/smart car Includes a split version for printing on standard 200 X 200mm beds To join,…
Fantasy dragon egg suitable for resin and fdm/fff. Can make for a good decorative piece or present. Modelled in Blender. It might be inspired by GoT, I honestly have no idea as I only used google images and never looked further. Happy…
New helical model without supports. Helicoidal eggs dispenser approx 15 units of XL size, maybe 16/18 of other sizes. Optimized model to do it without supports and redesigned (recommended) A model with supports is also left, but it is…
![Squid Game Gonggi - Korean Jacks - Osselet Set (Jacks Game) [Updated]](https://media.printables.com/media/prints/1123432/images/8479780_aec8d906-b096-4e90-bd50-58292bb4f8b6_f838fc03-0805-4fb2-898a-edf94517cb3f/screenshot-2024-12-27-221040.png)
