Liczymy pasujące modele…
A practical, wall-mounted holder for your glasses. The model is optimized for easy 3D printing and requires no supports. It is designed to be mounted to a surface using double-sided adhesive tape (approx. 2 mm thickness).
An organizer rack for safety glasses I find user friendly. Some notes: I print in PETG and recommend you to also use PETG, as this relies on flexure of the printed part, and it is untested in other materials Printed at 0.2mm layer height…
Affiliate links for my favorite filaments to help support what I do are here: Linktree I wear my prescription lenses till they break and they usually lose the padding near the ears so I created a simple TPU replacement. These are for…
Glasses shelf for the Multiboard system. Designed to be mounted using Multiboard Small Thread, Flat Head T-Bolts Orientation: Print on bottom (for maximum strength and to avoid supports). Material: PLA. Infill: 15% (Grid or Gyroid…
A simple case for cheap reading glasses. It's quite finicky to get the measurements right so there is a parameterized FreeCAD file included where the dimensions can be adjusted. One can also try scaling the model file for the same result.…
Hello Unfortunately a little later than expected later than never ^^. A beautiful modern glasses stand. Unfortunately, there is no longer any fits due to the dimensions. Show me your version in the comments and leave a comment.
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
Print Settings Rafts: No Supports: No Resolution: 0.2 mm Infill: 15 % Filament brand: Elegoo Filament color: Transparent Filament material: PETG
A dog with sunglasses designed by Meshy.ai with no changes made to it. it would be best printed on a resin 3d printer.
This is another new version of my glasses case. See also the previous model https://www.thingiverse.com/thing:5751006 . I noticed that the previous model kept tipping over when you opened the lid. I was also in the mood for a new design.…
Wall mounted box for safety glasses. The lid stays closed due to its own weight and the safety glasses. The lid has an end stop when opened and therefore does not fall down. Several boxes can be mounted on top of each other to save space,…
A simple case for cheap reading glasses. It's quite finicky to get the measurements right so there is a parameterized FreeCAD file included where the dimensions can be adjusted. One can also try scaling the model file for the same result.…
Flat mount sunglasses clip for use anywhere you need to store your glasses. I put two over head in my center mount in my jeep. Works perfect! Adhesive backed foam is required inside the clamping faces to keep glasses secured and so they…
This is a fairly compact case which will carry 10 pairs of daily wear contact lenses and a pair of glasses.
Novelty glasses with a scope reticle so you can take aim at your friends and love interests. Makes a great gift for your gun nut friends! Wear to parties and social gatherings. Assembly only requires a short length of filament t act a a…
For those who have magnetic glasses frames (casper to be precise, iykyk) this is really cool to make your own design! Here is how i got it to match “perfectly”: Printed on P1P with a smooth holographic plate for the light effect with…
Printed in Verbatim PETG 0.2 mm layers. Make sure to insert the magnets with the same poles in both holes of the bottom piece and the opposite poles facing down on the top piece. I found it easier to push the magnets into the bottom piece…
These sun shields are thicker than the originals. I've made them that way so they'll hold their shape. I've designed a version with a 10x1 mm magnet slot—just be sure to align the poles correctly before gluing them in place. While they…
This clip slides onto your shirt collar, and has a hole to put your glasses through. This way, you can hang your glasses without them slipping out so easy
EXTRUDR Easter Bunny 2017 Separate Sunglasses + Lenses >>> Reupload of the Extrudr Easter Bunny 2017 Separate Sunglasses >>> Lenses for Sunglasses (my remix) I made suitable lenses for the Extrudr Easter Bunny 2017 with separate…
Affiliate links for my favorite filaments to help support what I do are here: Linktree I wear my prescription lenses till they break and they usually lose the padding near the ears so I created a simple TPU replacement. These are for…
I was looking for a compact case for my clip-on sunglasses, but most cases were too big, mostly for the glasses themselves. So I decided to print a custom case. The case is just one clip and fits discreetly in my trouser pocket where I…
Adjustable 3D-Printed Glasses Retainer Choose either the large or small attachment model. The small one is designed for very small glasses, while the large is better suited for most glasses. Never lose your glasses again — this…
Box for glasses. Printed with PETG, layer - 0.1 mm (for better look), perimeters - 4, support - yes, brim - yes STEP files included
Glasses case dimensions via pictures add magnet 6x3mm with glue insert with hexagon 1mm thick (optionall) Print settings 0.2 mm layer 5 walls 30% infill no supports Print together like a one part for insert use TPU
Current version is for suited for four sunglasses and can be mounted by using double-sided mounting tape. If the pins are to small, try adjusting them by a few percentagepoints to get that tight fit. Enjoy! Get creative and choose your…
This model is for those whose original nose pad broke. I made it for my friend, she said that it is better than before.
Info This is pretty and easy to print Jägermeister glasses holder for 6 glasses. It is for storing glasses in home, freezer or in car. If you find some problems please text me i will fix it. As always i uploud Fusion 360 projekt file so…
Optico Professional Optical Glasses Cleaning Wipes (50mm x 69mm package) from Costco - Dispenser. Two versions, 90mm and 120mm tall. Mount with command strips to wall. Alternate 120 version with 2 holes 40mm apart. Alternate 90 version…
16 cm long, 5 mm thick, 35 mm wide. Contains two pairs of glasses, Samsung Galaxy Pro 3-sized headphones, and two packs of chewing gum.
I liked the original model but wanted it to hold more securely. See remix changelog for notes. Fusion 360 files included. Have fun. Licensing: Credit/attribution/link is my only requirement. Free to use, modify, or sell. Please share your…
Something to keep my glasses handy when not on my head. Several versions, see files. No supports needed, print as pictured. Edit: Added "Portable" version to slide under things. Edit2: Added versions with spot for 2"/50mm circle adhesive…
It is very small so please use TPU/Nylon/ASA/ABS or other heat resistant filament. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other models HERE Any feedback will be…
Designed with stunning gothic architecture details—towering spires, pointed arches, and rose window carvings—this dark and elegant piece transforms ordinary storage into a work of art. Visit my Thangs.com:…
Inspired by https://www.printables.com/model/1407760-sunglasses-holder-for-sun-visor-in-car But it's hardly a remix. I built it from scratch, added “teeth” to the design for better grip and honestly was experimenting designing with…
Keep your glasses safe! Use 3M double-sided tape to stick this wall mount / holder to the wall. Slide one arm of the glasses down into the holder. I print this with these settings: 1.5mm Structural 100% infill, rectilinear PLA 13/12/2025…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Custom made to fit my Warby Parker (Callum model), which use a significantly wider holderback width than the default. Graylynn 's remix of the original model does increase it to ~155mm, but it still comes a bit shorter for my…
This is a very simple model to create. Print out the frame and the two arms and screw the arms into the glasses just like a normal pair. Use an M2 8-10mm screw. Fits really well. Use glow in the dark filament and have a great NYE !!…
Each holder holds 4 glasses. Multiple holders should fit snug beside each other. Requires supports for printing. I printed with PETG but I'm sure PLA will work just as well.
I printed it with PETG and no supports. Needs 6x M4x40mm screws. Fits 2 pairs of Milwaukee safety glasses and a stream light flashlight
Hello, Today I have Happy New Year 2026 glasses for you. They are suitable for every party! They will make every New Year's photoshoot special. You also have a model for children from me. Good luck with the printing! I used PLA/PETG as…
This is a compact case designed specifically to hold 2 pairs of 3D glasses from the cinema so you can keep then clean and scratch free for your next trip down there. I'll be keeping this in my cars glove compartment so I always have them…
Print instructions Print settings supports - no , maybe a bit with the ball brim - no layer height - any (0.2mm is tested)
Rugged Glasses Box The box is printed Print-in-place The locks are printed separately and click onto the top of the box. The dimensions of the box are in the picture, measure your glasses first. If it is small, scale all parts equally in…
easy to install, just need a small piece of command strip. PETG recommended, but PLA will work fine
Glasses shelf for the Multiboard system. Designed to be mounted using Multiboard Small Thread, Flat Head T-Bolts Orientation: Print on bottom (for maximum strength and to avoid supports). Material: PLA. Infill: 15% (Grid or Gyroid…
Bring personality to your desk or shelf with this collection of 3D printed bust-style sunglasses holders — each one inspired by a different iconic character or figure. Perfect for organizing your glasses in a fun and creative way while…
Small, minimalistic hanger which can be attached to every kind of bike handlebar with 1x zip tie/ cable tie. Keeps your glasses safe by hanging on your bars when not needed. I used PETG for a solid result. Have fun printing your…
I was given a hanging mat that holds my glasses, but found it collapses when hanging. I modelled this in Shapr3D and printed in PETG. Can be scaled to whatever length is needed.
My very first very simple 3D model for some sunglasses that were laying around in a drawer. Fits 4 regular sized glasses/sunglasses. Or other stuff that fits into 154x45mm compartments. The whole tray is 195mm x 160mm. No real challenge…
A fashion glasses, you can wear it.. i don't care if you can't see through it ..
A place to put your led-lit magnifying glasses from Yoctosun. Print with supports.
Use this glasses holder to hold your glasses when you are busy.
This is the first model I ever designed and the first version of it. It is modular, meaning you can print the parts however many times you want in order to get to satisfying results. The sort of exception to this is the Rotative Base Pole…
Protective Storage Case for Fragile LED Magnifying Glasses (Electronics Repair Goggles) These low‑cost LED magnifying glasses are handy for electronics repair, soldering, inspection, and detailed work—but the frame and head‑mount are…
I wanted a version of this that I could put on a Multiboard that is installed on the inside of a closet door. To make the glasses more secure given that the door is opened and moves the installation I raised the sides and added a nose…
This specific design showcases the iconic, the passionate puppy created by BTS's Jimin, with his tongue playfully sticking out. Perfectly sized to fit on your desk, nightstand, or vanity, this dish brings the energetic spirit of the BT21…
Show your love for the entire BT21 universe with this unique, 3D-printed accessory tray!This specific design showcases the iconic, the passionate puppy created by BTS's Jimin, with his tongue playfully sticking out. Perfectly sized to fit…
Heart-shaped glasses for all creatures in your life (excluding fish). Perfect for Valentine's Day and date night. Three sizes to choose from scaled from the small size: Size Designed For Scale Small Cats 100% Medium Dogs 150% Large Humans…
A holder for my sunglasses, to attach them to the fridge and or the bulletin board next to my desk. If you want, you can glue a strong magnet to the back, I added a recess indentation on the back that should fit rectangular or circle…
Cute Chibi Owl Planter with Glasses | Drain Hole | Desk Organizer / Pencil Cup Has drain hole hidden in the feathers. Could also use as pencil cup or desk organizer. I have current purge set high as black loves to bleed into white so you…
Remix of Multiboard Glasses Stand by eugenyale . Changed the connector from Multiboard to openConnect. Also added a longer version (the one shown in the pictures). I got a good result by printing the model tilted forward and sunken into…
I wanted to make something that was easy to print and that didn't seem like my glasses would tip forward on. I also wanted something I could maybe add a little splash of panache to. On my old Flsun qqs, each piece took about 45 minutes to…
TPU wine glass holder This glass holder ensures that your stemmed glasses are held securely during the washing process. The holder secures stemmed glasses to the dishwasher basket and prevents them from tipping over or knocking against…
Video! Everything prints flat - no supports needed! SAFTEY NOTE: Wear at your own risk - the polycarb is used to block UV. Without it, polarizer-only glasses can be dangerous, as they block visible light, so your pupils dilate, but then…
Brick-Style Glasses Holder – Customizable with Minifigure No AMS, under 30minutes printing time - fits kids' and adults' glasses as well. 1x2 brick needed to fit the minifigure. Do not have a brick? Print the one here: Printing notes:…
This Clip-On Sunglasses Case features an integrated filament hinge, a soft felt lining, and a secure magnetic closure. The design includes precision cutouts on both sides for seamless felt and magnet integration. Assembly Instructions…
Steve (Steven Paul) Jobs — Buste (avec ou sans lunettes) 🇫🇷 Description Ce buste représente Steven Paul Jobs dans une interprétation sculpturale classique, limitée à la tête et au haut du torse, reposant sur un socle discret. Les volumes…
I made this with ELEGOO PLA and magnets of 6mm x 3mm Printer settings: 0.4 mm nozzle 0.2 mm layer height 15 % filling Gyroid 3 walls No support Make sure to add a pause in your slicer For the lid pause at layer 182 For the case pause at…
I liked this design for glasses but I wanted one for my sunglasses. So I made some new markers and changed the hinge so that I could use M3x20 screws, since I have those lying around. Print however, no supports needed. I printed all of…
This connects to openGrid using openConnect. I've included one attachment type but any of the openConnect snaps should work. I printed the holder as it would appear on the wall with supports.
I recommend printing in a high temp, like PETG, filament - although PLA would work... when printed in PLA it warped over a few weeks of use. The additional sizing of a 4mm inside to hold glasses with thinner arms, which most of mine are!…
A wall-mounted model of the Pokémon Probopass made to hold your glasses for you Printed with generic PLA at .2mm with 15% infill and auto supports The model is meant to be assembled after printing (I used super glue) The model does not…
A simple Multiboard shelf to put glasses on. Print Settings Print at 0.2 mm layer height.
Multiple pairs of (sun)glasses, two parts, no supports! The original length + base (my settings) prints in 1 hour and 45 min, with 45g filament, so this is a pretty quick and light print! I like the style of 'wrap around' sunglasses, and…
Harry Potter-style glasses for HP Otto Harry Otter or Otto Potter? Assembly notes Both pieces just fit together; you can support them with a bit of glue. Printing notes Printing time: approx. 25 minutes Material: PLA Nozzle: 0.4 Supports:…
A practical, wall-mounted holder for your glasses. The model is optimized for easy 3D printing and requires no supports. It is designed to be mounted to a surface using double-sided adhesive tape (approx. 2 mm thickness).
I made this as a Christmas gift for my friend who wears glasses and often sports bowties. He loved it. I think he even squeaked when I showed it to him. The Lemon Lime Philodendron that lives in it is thriving. Sorry about the picture…
Turn your Otto robot into a true nerd! 🤓 This simple and fun glasses mod gives Otto a brand-new personality. The chunky nerd-style glasses make the robot look smarter, cuter, and much more expressive. The model is designed to fit the HP…
Compact glasses case. Uses 2 8x2mm magnets and a piece of filament inserted for the hinge. Internal dimensions L - 162mm W - 40mm H - 33mm
A simple wall-mounted holder for sunglasses inspired by simui's "Solwave". Use 4 pieces of 1.75 mm filament for the assembly instead of glue.
This is a remix of the original Gridfinity Glasses Holder . The base has been redesigned to better comply with the official Gridfinity specifications. In the original model, the module did not fit perfectly into standard Gridfinity grids,…
👓 Skadis Glasses Holder 🧩 Description Keep your glasses safe, visible, and always within reach with this Skadis-compatible glasses holder . Designed to fit perfectly on the IKEA Skådis Pegboard, this holder adds a simple and elegant…
A simple protective case for your glasses or sunglasses. the case has a sleek and functional design witch a magnetic latch mechanism that makes it easy to open one handed. Printed in 4 different parts it can be assembled with only 3…
Ioniq 5 sunglasses holder for the magnetic spot on the instrument panel. Uses four 6x2.6mm magnets (what I had on hand). Fusion360 file included for customization. Prints in one piece, front side down. Might need to tweak settings to get…
An organizer rack for safety glasses I find user friendly. Some notes: I print in PETG and recommend you to also use PETG, as this relies on flexure of the printed part, and it is untested in other materials Printed at 0.2mm layer height…
This is a compact, custom-designed case for glasses. Make sure to check the dimensions against your own pair before printing, as fit may vary depending on frame size and shape. The design uses a simple hinge mechanism: insert a short…
