P
PrintablesJordan Hasenberg
95-98 GMT400 Chevrolet Dash Saver
A small, easy-to-print bracket to help reinforce cracked dashboards in 95-98 Chevrolet trucks
- Pobrania
- 767
- Polubienia
- 37
- Ocena
- 5
Wyniki wyszukiwania: gmt
Liczymy pasujące modele…
P
PrintablesFirebrick43
GMT800 Silverado / Tahoe / Suburban / Yukon Door handle repair clip (1999-2007)
This is a repair part for your GMT800 front door arm rest clip. The door switch panel clips into it. The originals are prone to breaking with age and then the switch panel flops around. Print in ABS or PETG for heat resistance. Printed…
- Pobrania
- 663
- Polubienia
- 66
- Ocena
- 5
P
PrintablesCarter Swenson
GMT800 dash cubby
replaces the cubby in GM trucks that is annoyingly too small to fit most phones. it is 3.12" wide and 6" deep. fits my IPhone 12 with a case very nice. pop the trim off and the old cubby out. Please feel free to modify this to suit your…
- Pobrania
- 523
- Polubienia
- 30
- Ocena
- 0
P
PrintablesNate Woodruff
GMT800 Dash Pocket Adapter
I wanted a way to use a Ram Mount cell phone holder in my truck without a suction cup in the windshield or taking up a cup holder spot. That little pocket in the dash is such a weird shape and kind of unusable that I figured it would be…
- Pobrania
- 205
- Polubienia
- 26
- Ocena
- 5
P
PrintablesFirebrick43
GMT800 LT Silverado / Tahoe / Suburban / Yukon Door Switch post repair (1999-2007)
This part helps repair the front post on higher optioned LT models that can break if the rear clip fails. Not all models use this front bolted post from the bottom. Print from ABS/PETG solid for strength. Will need to use supports and put…
- Pobrania
- 158
- Polubienia
- 44
- Ocena
- 0
P
Printablesohlaf
Terrain hexes for Memoir 44 (Days of Wonder) and Napoleonics (GMT)
Two types of hexes for both Memoir 44 and Napoleonics. Basic hexes are meant as straight replacement for a lost hex or to design a new one by drawing/painting/etc. These have same dimensions for each respective game. Hill hexes are meant…
- Pobrania
- 153
- Polubienia
- 6
- Ocena
- 0
P
PrintablesHudsonStan
Mind MGMT insert
Printed with PLA LW for light weigth and softness. Total weight of all parts of insert can be less than 250g. Print all 3 box parts and glue them together. Print 6x tray.
- Pobrania
- 124
- Polubienia
- 11
- Ocena
- 0
P
PrintablesNate Woodruff
GMT800 Wheel Nut Cover
I modeled this just to see if it would work. I know you can buy them aftermarket but I feel that a 3D printed one would be more robust. I'm including the Fusion f3d files so you can modify the model to your liking. Update: 6/28/25 The…
- Pobrania
- 120
- Polubienia
- 24
- Ocena
- 5
P
Printablesfotofisher
Speaker Stands for iLoud Micro speakers w/cable mgmt system
Speaker Stands for iLoud Micro desktop nearfield reference speakers with a cable mangement solution.
- Pobrania
- 92
- Polubienia
- 19
- Ocena
- 0
P
PrintablesTJ
Seiko NH34 GMT Hand Pusher tool
This is a tool for pushing the GMT hand on watch. Printed in PLA
- Pobrania
- 76
- Polubienia
- 8
- Ocena
- 5
P
PrintablesKraig Westhoff
GMT800 dash cubby for wireless charger
Created a deeper well, added a vent on side for heat management, cutout for charger cord, used the following charger mat from amazon, with each side cut per instructions. link for charging mat…
- Pobrania
- 70
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNate Woodruff
GMT800 armrest attachment
The part that is built into the armrest of my 2006 Chevy Silverado 2500HD Duramax broke. Without it, the door panel pulls away from the door when closing it. It's a very simple design but it seemed to work. I just epoxied the s*!t out of…
- Pobrania
- 63
- Polubienia
- 17
- Ocena
- 0
P
PrintablesKickbut101
Chit Holder / Tile Holder for GMT Games
This is a 2x12 tile holder for games with chits like GMTs Space Empires or Twilight struggle or what have you. I will be uploading more sizes later on for different holding options. I also included a singular unit that you could multiply…
- Pobrania
- 62
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFlusteredOzzy
GMT400 Chevy Winter Front
Based off my grill which was ordered from Amazon (99 k2500). Unsure of what grill styles it will fit. FreeCAD file is also up so you can have a solid starting point for your project as well. this is 200mm x 98mm x 30mm. I personally used…
- Pobrania
- 61
- Polubienia
- 5
- Ocena
- 5
P
Printablesxiipledge
GMT Games Wolfpack U-boat Dashboards and U-boat Token
I have been enjoying GMT's Wolfpack game designed by Mike Bertucelli. It is a fun and immersive experience especially if you have interest in this part of WW2. I had some issues referencing the correct U-boat to the correct player board…
- Pobrania
- 60
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHazMatt
1846 Board Game (GMT) Storage
This is a storage solution for the GMT edition of the 18xx board game 1846. The box holds 2 trays, one for the yellow tiles and one for the green tiles (use the yellow_tray design for both). The brown and grey tiles fit in the bottom of…
- Pobrania
- 57
- Polubienia
- 4
- Ocena
- 0
P
PrintablesH3xCat
Split 4x6 Speaker Adapter Bracket for GMT800 (Silverado / Sierra)
After failing to find a reliable 3D-printable bracket online, I designed this from scratch. Standard design rely on a plastic spring-clip lock, which is inherently fragile when FDM printed. This design solves that problem by using a…
- Pobrania
- 52
- Polubienia
- 7
- Ocena
- 0
P
PrintablesGuardianHobbies
GMT Tray Dividers
Two and three segment dividers that drop into your GMT counter trays to keep the counters separated. Category: Games
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBoluge
Watch GMT Hand Pressers
Small tip to clip onto the end of a press tool for watch needles in place of the original tip. Printing Instructions: Recommended Settings: Use a layer height of 0.10 mm for an optimal balance between printing time and quality. Supports:…
- Pobrania
- 50
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCaden Wellnitz
GMT400/GMT800 4.3 Vortec Intake Hat to Throttle Body Gasket
Designed for 4.3 V6 Vortec on pre 2000 gmt400/800 GMC/Chevrolet Pickup trucks. Must be printed with 95a or less TPU, 2 walls, 30% gyroid infill, and 0.16 layer height. I also recommend setting seam to random to reduce the possibility of…
- Pobrania
- 50
- Polubienia
- 11
- Ocena
- 5
P
PrintablesTheTexMech
GMTEC Fan 120mm AMD Ryzen 9 7940HS
Fan Cover to cool SSD and Ram for: Mini Gaming PC AMD Ryzen 9 7940HS 2TB PCIe4.0 SSD 32GB DDR5 5600 MHz RAM, Desktop Mini Computers Windows 11 pro, Radeon 780M Graphics, 2.5Gbps LAN, HDMI 2.1, 8K USB 4.0…
- Pobrania
- 50
- Polubienia
- 3
- Ocena
- 0
P
PrintablesXartle
GMT130 display model
Made this to design a pi zero project. OpenSCAD file posted in my github fork. https://github.com/xartle/Python_ST7789 Huge thanks to solinnovay for the SPI driver btw. :)
- Pobrania
- 48
- Polubienia
- 1
- Ocena
- 0
P
Printablesmagu
2 pile card tray for GMT Games size decks
What? A 2 slot card tray for keeping GMT Games size decks and discard piles organized. Particularly awesome for the COIN game series. Why? Because I hate it when the decks start to slide around the table when playing late at night.…
- Pobrania
- 41
- Polubienia
- 9
- Ocena
- 0
P
PrintablesFirebrick43
GMT800 LT Silverado / Tahoe / Suburban / Yukon ATOTO USB (1999-2007)
These prints are to install the Atoto USB ports into the dash of a GMT800. They use the original cubby if so equipped. The dash face plate easily pops off (see youtube) and you can remove the cubby by removing the M8 headed screws. The…
- Pobrania
- 41
- Polubienia
- 11
- Ocena
- 0
P
PrintablesScarecrow
95-99 GMT400 Hood Release Repair
Repair plug for GMT400 hood release handles if you (or someone else) managed to rip it off the body via the drivers kick panel. This plug plus some epoxy is a solid repair. Recommend ABS, PETG, or better. Not a job for PLA. Print Settings…
- Pobrania
- 37
- Polubienia
- 10
- Ocena
- 0
P
Printablesapope
Auxbeam switchpanel mount for GMT400/OBS Chevy
Simple mount for 6-gang Auxbeam switch panel. Used in a GMT400
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
Printableskarel.works
16mm GMT Counter Stand
Stands for one 16mm GMT counter. You can use them for a variety of things. In the Fields of Fire , I use them as markings of e xposed/pin or covers and field fortifications. In the Plantagenet , it could be used for Vasals and so on. It…
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLuftwaffles47
Chevy GMT400 Passenger Vents
Following a request on the page for my driver's side vent, I modeled and printed the rest of the vents for my 1988 GMT-400 chevy truck. You can use these to replace broken vents (all my vanes are disconnected from the controls) or just…
- Pobrania
- 32
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJan Riha
Grease Injector LM8UU - LGMT 2/0.035
This grease injector for LM8UU bearings is adjusted to fit a small tube of SKF LGMT 2/0.035 (35g/1,2oz) bearing grease. The outer thread diameter on the tube is 10.56mm which does not correspond to any standard thread size. I have created…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarcel
Ikea Skubb Partition wall - Cable Mgmt
I use them to keep my cable organized. Should work for Boxes with the size HxW 12,5 x 13,5, Walls 3mm
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKickbut101
GMT Chit / Tile trimmer
Little plastic tile holder for use with a nail clipper or small side-cutting pliers. This way when you're clipping tiles you can make sure they are all uniform and it provides a relatively fast way to clip them. The hole in the middle is…
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAngryTaco
GMT Games Red Storm Aircraft Data Cards Holder
This card holder allows you to store ADC and SAM Data Cards in one place! Print the top and bottom and you should be good to go. Fit might be a little loose, please let me know if you have some issues and I will tighten it up. It does…
- Pobrania
- 22
- Polubienia
- 6
- Ocena
- 0
P
Printablesamish_rabbi
1862 GMT Tile Trays
print 3x the tile trays and a1x the lid lid is printed with no top and bottom layers and 15% grid infil you will need 6x 3/8"D x 1/10" magnets Category: Toys & Games
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
Printables00becks
Falling Sky - Insert/Organizer - GMT - COIN Vol. VI
Separate trays for all factions. Quick to set up... More time to play :-)
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 5
P
Printables00becks
People Power: Insurgency in the Philippines; insert; organizer; GMT Games
Small insert for this fantastic coin game! The cards have to go up because the space below is not wide enough. Fits sleeved cards (Paladin sleeves, 90 microns, should work for others). addet
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNC Studios
Climate control adjustment joiner for GMT800
This is a climate control adjustment joiner compatible with the 2003-2006 GMT800 controller, Chevy Silverado, Tahoe, Suburban, GMC Sierra and Yukon. It will work with any of these vehicles that have the manual climate controller as a…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
Printablesnsocwx
GMT900 Rear Cargo Side Storage Door Latch — 2007–2014 Tahoe/Suburban/Yukon/Escalade
Replacement rear cargo side-compartment latch for 2007–2014 GMT900 Chevrolet Tahoe, Suburban, GMC Yukon, Yukon XL, and related Cadillac Escalade models. This is the small plastic latch used on the left-side rear cargo-area storage/cubby…
- Pobrania
- 9
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCam Hinshinsaw
GMT800 platform Silverado Daylight Sensor Cover
3D Printer Files | 3MF File | GMT800 platform Silverado Daylight Sensor Cover | Creality Cloud
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 0
P
Printables00becks
Vijayanagara: The Deccan Empires of Medieval India, 1290-1398 by GMT
Small organizer. The base plate isn't actually necessary. Fits sleeved cards and allows the lid to close flush.
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printables00becks
Coast Watchers - GMT - Insert
An insert that blends "seamlessly" with the original layout. Exposed tokens might not be the best idea, but the trade-off is that everything in the game remains visible and clearly organized. It even holds up when stored vertically -…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJames Roberson
Chevy Silverado GMT900 Fob Redesign Shell
Never really liked tNever really liked the seashell type fob for my silverado. So i designed a new onehe seashell type fob for my silverado. So i designed a new one a bit more blocky. I would have loved to make it more like the 2015+…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTomas Woren
Google home Mini sidemount with cable mgmt EU
I wanted a mount for my Google mini that protuded as little as possible from the wall so I turned the cable management of the mount made by Carljam ( https://www.thingiverse.com/thing:3471944 ) around and placed it on the back. Then added…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRevivable7947
88-94 GMT400 OBS Ashtray Charger
Add a USB charger to an 88-94 GMT400. I used this charger: https://www.amazon.com/dp/B0FY674MJD but it will probably fit most of the ones of this design. You'll need 4 M3 heatsets & 4 M3 screws, unfortunately I didn't write down what…
- Pobrania
- 1
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAMerican_Car_LOver
Brazilian 1998 Chevy Silverado 1500 GMT400
Back in '97 Chevy came out with a factory truck that had 4.2l MWM 6.07 turbocharged inline 6 diesel that made around 170 horsepower (126 Kw) and 300 lb/ft of torque (406 Nm). Its top speed is around 104 mph (167 kmh) and can only be…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCraig Trader
GMT 1833NE Gamebox Organizer
I recently received my copy of 1833NE: Railroading in New England , so of course I designed storage trays for it. The trays fit in the game box without removing the insert (though I tuck the money under the insert since I use poker chips…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
GMT800 armrest attachment
The part that is built into the armrest of my 2006 Chevy Silverado 2500HD Duramax broke. Without it, the door panel pulls away from the door when closing it. It's a very simple design but it seemed to work. I just epoxied the s*!t out of…
P
Printables
Chevrolet Suburban Wall Art GMT800
I designed a simple outline of the GMT800 Suburban/Yukon XL It is easily able to be hung on a wall, or can also stand alone on a flat surface
P
Printables
Chevrolet Silverado GMT900 Wall Art
Chevrolet Silverado GMT900 Wall Art; can be scaled easily and can be hung or stand alone. I also take requests If you like and enjoy it, feel free to rate/boost (it really helps)
P
Printables
Chevrolet Suburban Wall Art GMT800
I designed a simple outline of the GMT800 Suburban/Yukon XL It is easily able to be hung on a wall, or can also stand alone on a flat surface
P
Printables
Chevrolet Silverado GMT800 Cateye Wall Art
Chevrolet Silverado GMT800 Cateye Wall Art; can be scaled easily and can be hung or stand alone. I also take requests
P
Printables
Chevrolet Silverado GMT900 Wall Art
Chevrolet Silverado GMT900 Wall Art; can be scaled easily and can be hung or stand alone. I also take requests If you like and enjoy it, feel free to rate/boost (it really helps)
P
Printables
GMT024-08-SPI8P version 1.1 / 1.3
TFT Display that's 2.4 inch. Made this because no one else did. UPDATE : added v1.3 as well, since that's bigger.
P
Printables
GMT800 Cassette Player Hole Storage Cubby
For installation: Remove your old cassette player and housing undo the two screws holding the cassette player to the mount/housing Install the printed part into the housing (should be a snug fit), make sure the lip on the opening is on…
P
Printables
MIND MGMT Board Game "Recruit" token
My board game group lost one of the 12 recruit pieces for the awesome "MIND MGMT" game, so I modeled a replacement. It's not perfect, but close enough for just a token piece. I printed with a 0.25mm nozzle to get finer detail in the…