P
PrintablesFranspai
Netgear GS105 switch rack mount for the microlab
The tolerances are a bit tight so you might need to sand it down a bit.
- Pobrania
- 39
- Polubienia
- 8
- Ocena
- 0
Wyniki wyszukiwania: gs1
Liczymy pasujące modele…
P
PrintablesBrian Berkley
10in-Rack-Netgear-GS108
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the 10inch_TP-Link_SG108.stl by https://www.printables.com/@mariusbach_1431080 since the TPLink SG108 is roughly the same size as the Netgear Switch. Printed…
- Pobrania
- 1112
- Polubienia
- 76
- Ocena
- 4,43
P
PrintablesPicoNeslr
Netgear ProSafe GS108E v3 10" (& 19") Rack Mount
This is a 10" rack mount for a Netgear ProSafe GS108Ev3 network switch. This model assumes you have the 4 round stock rubber feet under the switch. Printed in PLA with a 0.4mm nozzle using 0.2mm SPEED preset with adaptive cubic infill.…
- Pobrania
- 556
- Polubienia
- 37
- Ocena
- 0
P
PrintablesSquirtle
Netgear 5 Port (GS105) Switch holder
The switch can be mounted under a table, on the wall or wherever you can fit 2 screws in it If you are looking for the same holder for the 8 port switch: https://www.thingiverse.com/thing:3278568 Print instructions Category: Computer…
- Pobrania
- 507
- Polubienia
- 60
- Ocena
- 4,8
P
PrintablesJan-E.de
10" Rack Brackets (1 U) for Netgear GS110TP POE Switch
A pair of brackets to mount a Netgear GS110TP POE-switch into a 10"-rack. As the switch is a little wider than the mountig rails in a 10-inch-rack, the switch is actually mounted behind the rails with a little gap to accomodate the cage…
- Pobrania
- 478
- Polubienia
- 44
- Ocena
- 4,5
P
PrintablesChriswak
Netgear GS116 Switch Rackmount Adapter
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
- Pobrania
- 437
- Polubienia
- 39
- Ocena
- 5
P
PrintablesVaarlion
Rack ear for Zyxel XGS1210-12 switch
This model barely fit in the mk3 bed size, and may be a bit flexible but having support under helped You will need 6 8mm m3 screw and 6 m3 square nuts to bolt the part together. The switch is meant to slide from the front, and be locked…
- Pobrania
- 413
- Polubienia
- 23
- Ocena
- 5
P
PrintablesOrnotermes
10" rack mount with keystone for Netgear switch GS108
10" rack mount for Netgear ProSAFE Gigabit switch GS108 (maybe others). It has one kestone slot on each side of the switch. Designed to fit my 10" 2020 rack. When inserthing the switch the sides will need to flex out a bit in the rear,…
- Pobrania
- 326
- Polubienia
- 38
- Ocena
- 5
P
PrintablesCHARL13
Netgear GS108 Multiboard Bracket
Brackets for mounting a Netgear GS108 switch to the Multiboard mounting system. You will need to print 4xHandsOnKatie_Standard-Underware-Connector from the original remix file library.
- Pobrania
- 312
- Polubienia
- 54
- Ocena
- 5
P
Printablesl3LueSkull
Netgear GS105 Lan Switch Holder
This is an Easy to Print Small Holder for the Netgear GS105 Lan Switch I was Searching for a Similar Model in the Web but didn't Find anything (maybe I searched not good enough) well whatever, I decided to just make my own, the Result You…
- Pobrania
- 298
- Polubienia
- 18
- Ocena
- 5
P
PrintablesRvdH
Netgear GS108E Wandhalterung
Über den Parameter “Spalt” kann der Freiraum für den Switch verändert werden. In der ersten Veröffentlichten Version stand er auf 0,2 mm, jetzt ist er 0,5 mm und liefert etwas mehr Freiraum.
- Pobrania
- 253
- Polubienia
- 13
- Ocena
- 0
P
PrintablesSquirtle
Netgear 8 Port (GS108) Switch holder
This is a remix of the design https://www.thingiverse.com/thing:1322695 . For a smoother fit I made it 1mm bigger in the inside and added a honeycomb pattern to it. The switch can be mounted under a table, on the wall or wherever you can…
- Pobrania
- 227
- Polubienia
- 33
- Ocena
- 0
P
PrintablesBrent
Netgear GS116 Switch Rack Mount Ears / Wings
I found various examples of mounts for this switch but all were bulky, used a ton of filament, or didn't use the factory mounting holes. I had one of the original metal ears that came with the switch and used it to model these. The result…
- Pobrania
- 224
- Polubienia
- 11
- Ocena
- 5
P
PrintablesNirvash
Netgear GS108E mount bracket
A simple bracket for the Netgear GS108E . It has small holes so you can see the power LED and retain access to the factory reset button. It fits very snugly and you'll have to relocate the rubber pads slightly (or you can remove them…
- Pobrania
- 210
- Polubienia
- 23
- Ocena
- 5
P
PrintablesIron Momo
Netgear GS108 10in rack
10in rack mount for the Netgear GS-108 8port gigabit ethernet switch. Based on the design from @BrianBerkley. Printed face down, 2 versions are available to be used with/without M3 metallic threaded inserts. 2 screws M3x10 are required…
- Pobrania
- 202
- Polubienia
- 27
- Ocena
- 5
P
Printableswiefeli
Netgear 8 Port (GS108) Switch wall mount
This is a remix of the design https://www.thingiverse.com/thing:1322695 . I seperated the model and added some support, so you can print it also on smaller printers and you are more flexible to mount. You have to mirror the parts in your…
- Pobrania
- 202
- Polubienia
- 25
- Ocena
- 0
P
PrintablesWyliGr
10" Rack Mount DGS108 Switch
For my simple Homelab, I needed a Rackmount for my old DGS-108 Switch (12 Ports, 1 Gbps). The print in in two parts : The support and the “ears” I used some super glue to fix them together. (Yeah, I used too much glue so I have white…
- Pobrania
- 197
- Polubienia
- 21
- Ocena
- 0
P
Printablesvsz
Zyxel GS1100-16 v2 10" Rack Ears
I couldn't find any other designs that could fit this switch so I made my own. This design is for the v2 version that has 3 holes in a triangle pattern. The v3 chassis of the switch has 4 holes and looks slightly different. Check the…
- Pobrania
- 196
- Polubienia
- 11
- Ocena
- 4
P
PrintablesNeukirchener
Zyxel GS1100-16 V3
I just started playing around with Fusion 360 yesterday and created brackets for my 10" Rackmount.
- Pobrania
- 183
- Polubienia
- 11
- Ocena
- 5
P
PrintablesRonald Queloz
Netgear-GS108-Mount-10-in-rack
This is a rack mount kit for the Netgear GS108 switch designed for a 10-inch rack. The kit comprises three parts that can be 3D printed without the need of support. The clamps must be secured to the main part using two small screws. I…
- Pobrania
- 174
- Polubienia
- 16
- Ocena
- 5
P
PrintablesChriswak
Netgear GS108 Switch Rackmount Adapter
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
- Pobrania
- 162
- Polubienia
- 18
- Ocena
- 0
P
PrintablesBert
BMW GS1250 Adverture
Download ? Please Like Thx BMW GS1250 Adverture
- Pobrania
- 160
- Polubienia
- 14
- Ocena
- 5
P
PrintablesEvilProphet
ESRack - Module - Netgear GS108GE
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
- Pobrania
- 153
- Polubienia
- 16
- Ocena
- 5
P
Printablestrondage
1U Bracket - fits ZyXEL GS1900-24 switch
I lost my brackets for mouting this switch in a rack, so I made my own since the other on Thingiverse didn't fit my holes. Use M3 8mm to mount them in the Switch. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK3…
- Pobrania
- 146
- Polubienia
- 9
- Ocena
- 5
P
PrintablesEdy
Zyxel GS1100-16 V3 Winkel für 10 Zoll Montage
Die Winkel ermöglichen die Montage von Zyxel GS1100-16 V3 Netzwerkswitches in 10 Zoll Netzwerkschränken.
- Pobrania
- 140
- Polubienia
- 6
- Ocena
- 5
P
PrintablesChriswak
Netgear GS105 Switch Rackmount Adapter
I had three Netgear gigabit switches (GS105, GS108, GS116) sitting on Rack shelves. I wanted to move them off the shelves and add them to a standard 19" server rack. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x 14mm…
- Pobrania
- 137
- Polubienia
- 15
- Ocena
- 0
P
PrintablesMcWuragu
Wall mount for Netgear GS105
This item is a small wall mount for the Netgear gs105 LAN switch. It is designed for the using of tesa powerstrips for the wall montage. It can be used for vertical and horizontal mount. Print Settings Rafts: No Supports: No Resolution:…
- Pobrania
- 130
- Polubienia
- 8
- Ocena
- 5
P
PrintablesGulianrdgd
10-inch Rack Mount | Netgear GS105 Switch
Remix from 6 inch rack to 10 inch rack
- Pobrania
- 129
- Polubienia
- 8
- Ocena
- 5
P
Printablessteve
Skadis 40mm to 45mm width adaptor (e.g. for Netgear GS105)
The pegs can be used to adapt the 40mm spacing to the 45mm of a Netgear GS105, or any other device with that pattern. In “reverse” order, the pegs can provide a 35mm width pattern. The holes are 3.5mm to be tapped M4 and the tolerances…
- Pobrania
- 126
- Polubienia
- 15
- Ocena
- 5
P
Printablesvvision
Netgear Switch GS108E Rack mount
Rack mount ears for Netgear GS108E switch. Remember to hold switch while pluging cables to prevent it from moving to the back. I've added a hole on each ear for the switch feets. Inspired by: https://www.thingiverse.com/thing:249851 Print…
- Pobrania
- 116
- Polubienia
- 15
- Ocena
- 0
P
Printablesdmayle
Zyxel GS1900-24E Rack Mount Ears
This model contains three variants of the rack mounting ears for the Zyxel GS1900-24E. First is the original, which matches the metal ears provided by Zyxel, and is likely too flimsy for 3D printing in plastic. There is a reinforced…
- Pobrania
- 114
- Polubienia
- 8
- Ocena
- 0
P
PrintablesAX
Netgear GS110EMX 10“ Rack Ears
Some Rack Ears for the Netgear GS110EMX Network Switch to mount in a 10“ Rack. Two Variant are available to mount. The normal 1U Variant and the weird 0.5U Version. In my Case it worked perfectly but it may not in yours… I would suggest…
- Pobrania
- 111
- Polubienia
- 16
- Ocena
- 5
P
PrintablesChristian Kernbeis
Netgear GS105 UnderDesk mount Easy2Print
Not much to say about this Thing :-) It's dead easy to print, use 4 Wall_Layers, infill 20%, no support if printed rear side to plate. As always: I added Autodesk Fusion file + Step - modify as you like. Print Settings Printer Brand:…
- Pobrania
- 104
- Polubienia
- 10
- Ocena
- 5
P
PrintablesPhilip Hermes
Switch Rack Mount (Netgear GS105E)
Small single-sided 1U mount for a Netgear GS105E switch, suitable for a 10" rack. The switch measures 10.1 x 9.4 x 2.6 cm. Also fits other switches of the same size.
- Pobrania
- 99
- Polubienia
- 6
- Ocena
- 0
P
PrintablesClonetrone
Zyxel GS1200-8 10 inch rack mount, with rounded corners
Zyxel GS1200-8 10 inch rack mount, remixed from the excellent model by Chillora. The remix introduces rounded corners and a centered slot to match the “rounded” rack look. Recommended to print in PETG for high thermal environments with…
- Pobrania
- 97
- Polubienia
- 5
- Ocena
- 5
P
Printablescrazybob1215
6-inch Rack Mount | Netgear GS105 Switch
A 6-inch rack mount for the Netgear GS105 and similar sized switches/hubs (94mm wide x 100mm deep x 26mm tall + 3mm feet) Inspired by and compatible with Mauker's series of 6-inch rack accessories and madmax890's models for the series.…
- Pobrania
- 93
- Polubienia
- 10
- Ocena
- 0
P
Printablesrcremote24
10 in Rack mount GS105 and Raspberry Pi 3,4,5
This mount is a combination of the Switch Rack Mount (Netgear GS105E) by Philip Hermes and the Raspberry Pi 2B/3B/4B/5B 10-inch Rack Mount by Maurício Pessoa. The two were combined to make use of the full 10-inch 1U space on the faceplate
- Pobrania
- 92
- Polubienia
- 14
- Ocena
- 3,5
P
PrintablesGianluca Bigagli
10" Rack Netgear GS110EMX mount
10" Rack Netgear GS110EMX mount
- Pobrania
- 88
- Polubienia
- 17
- Ocena
- 0
P
PrintablesJgreuh !
Netgear GS108 Skadis holder
A simple system of hooks to hang a Netgear GS108 switch ( https://www.netgear.com/be/business/wired/switches/unmanaged/gs108/ ) on an Ikea Skadis pegboard ( https://www.ikea.com/be/en/p/skadis-pegboard-black-50534378/ ).
- Pobrania
- 84
- Polubienia
- 5
- Ocena
- 4,75
P
PrintablesEvilProphet
ESRack - Module - Netgear GS105GE
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
- Pobrania
- 84
- Polubienia
- 16
- Ocena
- 0
P
PrintablesRobert S.
2/3u 10" Rack Netgear Holder (GS308E,GS108E)
If your 10-inch network cabinet is full to bursting with technology, this holder will save you some ⅓ U space. It can be supplemented with 4 M3 inserts on the sides so that you can additionally fix the switch to the side with M3 10mm…
- Pobrania
- 82
- Polubienia
- 8
- Ocena
- 0
P
PrintablesPablo
10" Rack Mount 1U | Netgear GS108
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Netgear GS108 This bracket is designed specifically for the Netgear GS108 switch, offering a clean and secure fit in your 10-inch rack setup. Features…
- Pobrania
- 81
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJesper Senger
Zyxel GS105B wallmount
The backstory: Tasked with the challenge of mounting a compact 5-port switch in our attic to facilitate network connectivity for our office outlet and Wi-Fi access points, I found myself with a Zyxel GS-105B at my disposal. With little…
- Pobrania
- 79
- Polubienia
- 14
- Ocena
- 5
P
Printablesp8ght
Zyxel GS1900-10HP 19" 1U Rackmount
Tipp: genug Infill wählen - (35% Gyroid reicht aus)
- Pobrania
- 75
- Polubienia
- 6
- Ocena
- 0
P
Printablesheron
GS110MX bracket for 10 inch rack
1U (actually 2/3 of 1U) bracket to mount a Netgear GS110MX switch (10gbps, unmanaged) in a 10 inch rack cabinet. Do not print in PLA. The heat and the weight WILL eventually deform it. I printed it in PETG with no supports. First mount…
- Pobrania
- 72
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDanAndersen
Zyxel GS1200-8 10 inch Rack Slimline
There are already a few 10 inch rack mounts for Zyxel GS1200-8 (and GS1200-5), but this one has some unique features: As slim as possible, to squeeze it into small spots. The holes fit between the 0.625 inch and 0.500 inch sections…
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGRO
GS110EMX-Skadis-Holder
I needed a holder for a Netgear GS110 to fix vertically on the SKÅDIS pegboard. It also fits other Netgear GS1xx series. It uses a dovetail system (see below) removing the hassle of those pegs. It's a tight fit. I added a file with…
- Pobrania
- 67
- Polubienia
- 23
- Ocena
- 5
P
Printablespiledge
Rackmount 1U Zyxel XGS1250-12
1U Rackmount for Zyxel XGS1250-12. Split design for small printers. BOM: 14x M2 heat-inserts 8x M2x25 (or longer) SHCS Screws 2x M2x16 (or longer) SHCS Screws 4x M2x10 (or M2x12) SHCS Screws You'll find a full assembly which shows how to…
- Pobrania
- 66
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGianluca Bigagli
10" Rack Shelf for Netgear GS108T & Wemos S2 Mini Relay Board
10" Rack Shelf for Netgear GS108T & Wemos S2 Mini Relay Board. Relay board space can be fill with an empty shelf.
- Pobrania
- 66
- Polubienia
- 10
- Ocena
- 0
P
Printablesvalentinarts
Netgear GS105 / GS105GE Multiboard Bracket
this is a remix from CHARL13's model. Brackets for mounting a Netgear GS105 switch to the Multiboard mounting system. You will need to print 4xHandsOnKatie_Standard-Underware-Connector from the original remix file library.
- Pobrania
- 65
- Polubienia
- 8
- Ocena
- 0
P
Printablesadnanklink
Rack Switch Ears for NETGEAR NETGEAR GS116NA
Switch ears for NETGEAR ProSAFE 16-Port Gigabit Ethernet Switch (GS116NA) Attaching one with M3 screw holes and M5 screw holes. Category: 3D Printing
- Pobrania
- 63
- Polubienia
- 6
- Ocena
- 0
P
Printablesgompa oneal
netgear gs105 mount
netgear gs105 mount print on its side
- Pobrania
- 61
- Polubienia
- 0
- Ocena
- 0
P
Printablesnilrog
Zyxel GS1200-5HPv2 10 inch 1U rack mount
This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 10 inch rack. The mount is 1U high, and the switch mounts flush with the front. The total depth when mounted in the rack is no more than then depth of the…
- Pobrania
- 59
- Polubienia
- 3
- Ocena
- 5
P
Printablesnickd
Skadis Mount for Netgear GS108Tv2
I've used a Skadis pegboard as the backplate for my network cupboard for a while. I had used velcro to attach all of my devices - but my Netgear GS108Tv2 switch is heavy enough that it has been sinking over time, so I've made a mounting…
- Pobrania
- 59
- Polubienia
- 4
- Ocena
- 0
P
Printablesspiralout 112
10" Rack Brackets (1 U) for Netgear GS110TP POE Switch Extended
Modified slightly to move the switch a bit further back so this bracket can be used with Natalie T's reworked 10 inch server rack. https://www.printables.com/model/1090551-modular-10-inch-server-rack-reworked
- Pobrania
- 58
- Polubienia
- 4
- Ocena
- 0
P
PrintablesUncluesteve
Pegboard mounting plate for Netgear GS108T switch
This is a Pegboard mount for a Netgear GS108T switch. It has a 75mm spacing between the mounting holes and uses a standard 1"X1"X1/4" U.S. peg Board. Pictures are from version 1. Version 2 has the holes to reduce some of the plastic.…
- Pobrania
- 57
- Polubienia
- 12
- Ocena
- 0
P
PrintablesTigger
10 inch Rackmount Ears for Cudy 16-Port Gigabit Light Managed Switch GS1016E
10 inch Rackmount Ears for Cudy 16-Port Gigabit Light Managed Switch GS1016E
- Pobrania
- 51
- Polubienia
- 6
- Ocena
- 0
P
Printablesmde32
NETGEAR GS108PP / GS108LP 10" Rack Mount
Description The design is optimized for 3D printing. Thanks to clever angles, the model prints almost entirely without the need for cumbersome support structures—saving time, filament, and post-processing. The minimal support structures…
- Pobrania
- 49
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJirkaVy
DIN-rail mount for Netgear GS108
Its next remix of original model.
- Pobrania
- 48
- Polubienia
- 5
- Ocena
- 0
P
Printableskeerekeerweere
19" rack mount for zyxel GS1900-8hp switch
This is a custom 19" rack mount designed for the Zyxel GS1900-8HP switch . It features left and right mounting brackets , each split into two parts , ensuring a secure and ventilated installation. The design includes ventilation holes and…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 4
P
PrintablesPretenda
D-Link DGS1008D 10" Rack Mount
Print the main body along with two retaining clips. These just screw in with a couple of M3 screws on the back to hold it in place.
- Pobrania
- 47
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMM7VXJ
Netgear GS110EMX 10“ Inch Rackmount Ears
This is a Remix of @Nightfall_536744 rack ears for the Netgear GS110EMX switch. This remix updates the design to fit with @Mauker “ 10” 3D Printable Rack Mount System ” It also adds a cut out to accommodate the GS110EMX optional rubber…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
Printablesbigrjsuto
Netgear GS108 Switch Vertical Stand w/ Ventilation Mod
Remixed print from Thingiverse. I just opened up the ventilation area more from the the original design. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Rafts: No Supports: Yes Resolution: .2 Infill: 10% Category:…
- Pobrania
- 43
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDanuke
Netgear GS105 Right Angle Bracket
Right angle bracket to hold a Netgear GS105 Gigabit Switch that I made for use in an outdoor enclosure. This can be used where ever it is needed such a custom network panel, under desk mounting, or about anywhere.
- Pobrania
- 42
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMindaugas Markauskas
Zyxel GS1900-8(hp) 19" rack mount
Extended the right part (part1) by 54mm
- Pobrania
- 40
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJawbones
Zyxel GS1100-16v3 10" Rack mounts
I wanted to have a Switch in my 10" Server rack, and this one was the perfect size, tho it only came with 19" rack mounts. This model uses the original screwholes & screws to fasten, and can be easily installed in your cozy home 10" rack
- Pobrania
- 40
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMarcin K
ZYXEL GS1100-16 RACK 19" Mount
Uchwyt montażowy do przełącznika internetowego model GS1100-16 Zalecam drukowanie z dużym wypełnieniem i użycie mocniejszego materiału.
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWolk9
Netgear Multiboard Brackets Stack for 2x GS108 switches
I have two 8 port switches stacked and I wanted to them to hang them on my multiboard system. Due to room on my wall I preferred to have them stacked instead of next to each other, so I assembled the orginal brackets to an assembled one…
- Pobrania
- 39
- Polubienia
- 6
- Ocena
- 0
P
PrintablesHoopy
Skadis holder for ZyXEL GS1200-8 switch
A holder to mount a ZyXEL switch onto a Skadis board. To mount the holder to the peg board, use these T-nuts .
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
PrintablesNanseneut
Netgear GS105 wall mount
A wall mount for the Netgear GS105 LAN -switch. The switch slides in sideways. The whole mount can be mounted with tape or you caN screw it into your wall etc.. Scale it to 102% - 105%, depending on how tight the fit should be.
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCeceka1
Wifi box holder Netgear GS108E
If you want to attach your wifi box
- Pobrania
- 37
- Polubienia
- 6
- Ocena
- 0
P
Printablesmkgin
20mm adaptor for Lidl Parkside Rotary Drill PMGS12 C3
Intended to match the size of the proxxon micromot mount ( 20mm) so that the Lidl drill can be used in a drill press holder made for a proxxon. A quick fix as my proxxon has a chuck and I haven't ordered collets yet. The parkside has…
- Pobrania
- 37
- Polubienia
- 5
- Ocena
- 0
P
PrintablesStarwhooper
Zyxel GS1200-5HP v2 19inch Rack Bracket
Mount Zyxel GS1200-5HP v2 in 19inch Rack
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNautiluStudios
Structured media panel mount for GS108
A bracket for a structured media panel to hold a NetGear GS108. I know there are improvements to make, such as something to hold the back end of the switch, so feel free to improve if you even want to. Just need two pins for structured…
- Pobrania
- 34
- Polubienia
- 7
- Ocena
- 0
P
Printableszcecc22
10" Tray for Netgear 5 Port Switch (GS105) and TP Link MC220L Media Converter
Compact setup for single 1U tray with both switch and media converter.
- Pobrania
- 33
- Polubienia
- 5
- Ocena
- 0
P
Printablesdvittorio
ESRack - Module - Zyxel Switch GS1200-8
I really liked the original ESRack system design created by @EvilProphet . I created a module for Zyxel Switch GS1200-8 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
- Pobrania
- 33
- Polubienia
- 6
- Ocena
- 0
P
PrintablesEmemell
Riser for Netgear ProSafe GS110TP Switch (deep version)
This is the version of this model for normal network cables. There is a shallow version here for flat network cables. I recommend printing at 100% infill and with a raft or brim for best support.
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
Printablesl8cloud
Zyxel GS1200-8 10inch 1U Rackmount
A generic 10 inch 1U Rackmount for the Zyxel GS1200-8 i bought for my Lab Rax. Locks the switch in place without requiring screws, allowing it to be mounted in virtually any orientation. Upside-down, hanging in a rack or standard vertical…
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLvL_Dani
SG108 GS108 modular rack mount
Tplink SG108 modular rack mount likely also fits netgear GS108 requires 1u rails, recommended to print with ASA https://www.printables.com/@LvL_Dani_470947/collections/2036642
- Pobrania
- 30
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRedGreen69
Leica GS16 ARP Extender
A quick and easy antenna reference point (A.R.P.) extender for Leica GS16 GNSS receivers. A great workaround instead of buying the GZS4 Height Hook. Grab a tape and measure to the bottom for a slightly more accurate height reading.…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesEHY_3dp
Netgear GS105 wing for Modular 1U Relay Rack Mount
Requirements for limiter installation ISO4762 M3 screws 10mm x 2 M3 threaded insert nut 3mm x 2
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
Printablesmarc7s
Netgear GS108 Dual 19" Rack Mount
A rack mount for the Netgear GS108 switch, that fits 19 inch racks. The design is modular as it is half width, so other components could be mounted on the other half (by making a compatible mount) if you only have one switch to mount.…
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
Printablesfronti
Netgear GS108 Vertical Mounting Cage
This is a cage to mount a Netgear GS108 vertically to a table using the great Desk Clamp by hein . You need to remove the small rubber feet of the Netgear switch to be able to slide it into the mounting cage. Print with supports required.
- Pobrania
- 22
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJustPrinting
Zyxel XGS1210-12 19inch Rack mount only glue
Thanks to @Vaarlion_340250 for the Original Model.
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKlaupauzius
Under Desk Holder for LGS105 Switch
Simple under Desk Holder for LGS105 Switch
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesWivry
Rack System - Module - Netgear GS108GE with cable hole
Check description of original model here: https://www.printables.com/model/793696-rack-system-module-netgear-gs108ge If you like this model please hit the LIKE button. It helps me collect the prusameters. You may also liked some of these…
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMatthew S
ESRack for Linksys LGS108P
Description @EvilProphet made a really nice system called ESRack. Expanding on it. The ESRack system includes the following components: Mounting Brackets - used to install the unit in the rack, available in 3 sizes: Short Medium Long…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
Printablescho45 SATOH
Staple-on wall mount for the Netgear GS105E
This custom wall-mount plate allows you to attach the Netgear GS105E switch directly to a wall surface using only a stapler. Designed for quick, tool-free installation, it keeps your network setup tidy while avoiding damage from drilling…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKarsten
Adapter Parkside PKGS1450 KH3175 Kappsäge auf Staubsauger-Anschluss
Adapter innen 45,5 auf innen 34,4 mm gedruckt in TPU, hochkant drucken Adapter 45.5 mm inner diameter to 34.4 mm inner diameter Printed in TPU, print vertically
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
PrintablesEmemell
Riser for Netgear ProSafe GS110TP Switch (shallow version)
This is the shallow version of this model for flat network cables. There is a deep version here for normal network cables. I recommend printing at 100% infill and with a raft or brim for best support.
- Pobrania
- 20
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFabrigator
Netgear GS108 Rack Mount (Dual)
Based on a Makerworld posting adjusted for two switches
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
PrintablesVortex31
Support switch Zyxel GS1200-5
Support pour ne pas gêner la sortie d'air de la Livebox dans ma baie de brassage. Support so as not to obstruct the air outlet of the Livebox
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEmrysFaowind
Netgear GS108
I created this for to work with the Mini Server Rack, which can be found printables.com/model/108975-19cm-network-rack I printed it with PETG, worked pretty well. a little tight I forgot about the feet to the switch when I was modeling…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 5
P
PrintablesCharly BEGOOD
TP-Link GS105S Ethernet switch enclosure
This is my TP-Link GS105S Ethernet switch enclosure for my printer Amiga desk. I use 4 screws 3x8mm for fixing the top You can now fix your ethernet switch on a desk or on a wall or under a shelf.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMartin_au
Battery store for Leica GS15 case
Battery store for Leica GS15 case
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 0
P
Printablespeterviszt
Cudy GS1024 Network Switch Wall Mount
By default this type of switch comes with a rack mount, but i wanted to mount it on a wall vertically. You might need a slightly longer screw, the original is a bit short with this()i believe its a M4 screw. I guess it should work with…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
Printables(n,p)
Netgear GS108E Friction Wall Mount
A friction wall mount for the Netgear GS108E 8-port switch. Attach the model labeled “SwitchSide” to the switch using 6-8 mm long M3 screws. The cavity on the switch should be deep enough to allow an M3 nut to fit in the wall mount slots.…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 5
P
Printablespeterviszt
Cudy GS1010PE POE Switch Wall Mount
By default this type of switch doesn't come with either a rack or a wall mount, but i wanted to mount it on a wall vertically. You need an M3 screw, at least 10mm long. I guess it should work with other switches from the same…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 5