Liczymy pasujące modele…
A diffusor that can be used with the NiteCore MH12GT or any other flashlight that has a head of 25.4mm wide.
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
This adapter allows you to securely mount a Nitecore MH12 flashlight using any standard GoPro mount . Designed specifically for the MH12 model, it ensures a firm hold even in demanding conditions such as mountain biking. For full…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Featured in 3Printr.com ! When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for…
This is a bracket to mount a HEPA filter to the Creality K1 and K1C at the rear fan exhaust. I take the cheap Levoit LV-H128-RF. You can get it on Amazon and Aliexpress.
Print with 3 perimeters for stability Use 4x M3 Threaded inserts, outer diameter 5mm, length 4mm: https://s.click.aliexpress.com/e/_DmG9Lyz
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
Osłony zabezpieczające podczas upadku mojego autorstwa (pliki 1,2,3) Pliki 4,5 nie są moje , należy je szukać n stronie: https://makerworld.com/pl/models/990931-meijiaxin-h12y-spare-tire-side-panels?from=search#profileId-966410
Tisk položené do “A” a doporučím trochu seříznout spodní části pro lepší styčnou plochu.
This is my first real attempt at creating a model. Few attempts and changes leading to this v3 version that is a friction fit for the filter. 10mm standoffs keep the filter and fans separated to allow the airflow to spread out to use the…
A 1x1 single height gridfinity storage box for GH1200 superglue as well as a slot for toothpicks (I tend to use toothpicks as applicators).
Right and Left doors Hyper Go H12Y JEEP
The original adapter is great, but it doesn't fit the K1C - the walls are too thick to fit in the slots. I discovered someone else had commented that after I had printed the whole thing plus the filter adapter. Ouch. I felt stupid. I…
MJX H12Y 1:12 RC roof rack with added side rails. Based on the original rack design. https://makerworld.com/zh/models/2257558-hyper-go-h12y-upgrade?from=search#profileId-2459355 Rail diameter: 3mm. Due to the 1.3° slope on the bottom…
Remixed to move the end stop 2mm higher so it works with the mgn12 rails, the original only just catches the limit switch. Category: 3D Printer Parts
Replacement handle for Bifinett KH1204 Customize This thing was made with Tinkercad. Edit it online Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,2 Infill: 10% Category: 3D Printing
Its a replacement wheel design for stock wheels, designed from scratch but inspired from stock wheel
Hello i have designed this funnel that fits the water tank of the Dream H12 Pro since I find it quite difficult to fill water in. I normally fill it half full, add the detergent and fill up the rest. This should make it bit easier to fill…
Hi there, I’ve uploaded a small project for the Dreame H12 Pro accessory holders. These holders should also work with other Dreame models that use the same OEM holders. I noticed that the original holders weren’t holding everything…
Adapter for connecting the Makita LH1201FL with Kärcher Category: Tools
In addition to a new look, the doors will also protect the model from scratches. It's best to use PLA filament.
No assembly required other than putting a filter in. The small half filled carbon air filter that came with the K1\K1C fits behind the HEPA filter. Given ASA nature you may have to scale +/- 2% ASA was used because of the high chamber…
Dreame H12 wall mount for accessories. TESTED AND OPTIMALIZED HOW TO USE IT: MOUNTING TO WALL FEATURE: Better to use wall mount screw, but generally on the picture you can see version mounted on 3M strong double tape width 15mm and…
The cross piece of the vacuum cleaner Dreame H12 pro
Fits for the lever to tighten the saw table Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Prusament PLA PETG Black Category: Machine Tools
In addition to a new look, the doors will also protect the model from scratches. It's best to use PLA filament.
I bought some GH1200 brand super glue from Amazon ( https://www.amazon.com/dp/B0BFNFRJYC ). The bottles are so thin that they won't stand up without falling over. Here's a tray that will hold 2 of them.
This is an exhaust shroud to fit LV-H128-RF Hepa filters. This model is to be used in conjunction with this adapter for the K1 series machines:
Wall mount for Fakro remote control ZRH1 or ZRH12
Designed the feet and caps for the Organize-It Resin Shelving System Model #SH12244SR purchase at BJ's. Printed with PLA at .28 layer height for speed. Didn't need it to be pretty.
This hook unlocks the saw table to set the cutting depth in table saw mode. It is attached to the cutting guard (Europe only) with two screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't…
I recently ordered a two pack of GH1200 super glue from Amazon. It's a pretty good glue for the price, and I like that the two pack has one thin viscosity for penetration and one thick for surface adhesion. The problem is that the bottles…
As I don't like to throw away stuff, I decided to fix my friend headphones hinge by recreating it with my my 3d printer. Enjoy!
Replacement logo for the H120 stickers that we all know get destroyed over time. Back is recessed for double sided tape. (thickness of tape may vary) ZYLTECH Dark Green PLA (very close to JD green) ZYLTECH yellow PLA The base plate has…
The GH1200 Super Glue bottles are not designed to stay vertically reliable enough so I had to design this holder to keep two bottles organized. This fits the GH1200 1 oz bottles sold on Amazon:…
Dreame H12 Dual Wall Mount Upgrade your cleaning setup with the Dreame H12 Dual Wall Mount, designed to provide a secure and organized way to store your Dreame H12 vacuum and its accessories. This custom wall mount ensures your cleaning…
When you have LM12UU bearings but wish you had LMH12UU bearings, this solves your problem. You could replace the inset nuts with heated press inserts, but these work better under compression so the hex nuts are recommended. Fits M3 screws…
Will help save money in the long run. Filament Type: ASA https://amzn.to/45V2hFw Layer Height: 0.2MM Walls: 2 Infill: N/A Supports: false LV-H128-RF Filters: https://amzn.to/3IbhhoQ If you want to thank me subscribe here and to my YouTube…
I like using DeskPi shelves for heavy or hot components of my 10 inch rack, what I don't like is seeing them. This makes it look nice and tidy while keeping the power button accessible, and has an indent on the lower U to sit flush when…
I got myself an old VEM VEB EH125 (small DDR jointer) and wanted to connect it to my dust collector. So I made this little Drop-In replacement for a 40mm (outer diameter) hose.
podlozka pro doladění vzdálenosti zadat potřebnou výšku ve sliceru.
Glucose is the sugar your cells burn for energy, drawn here as the alpha-D-glucose ring. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol…
Ein Stabiler Halter für die Bürstenrolle vom Dreame H12PRO passt bestimmt auch bei anderen Modellen, jetzt liegt diese nicht mehr nur so nebenbei.
I went to gridfinitygenerator.com and created a 2x5x12 and a 3x5x6 bin, then I used Blender in order to merge both bins to a single 5x5 bin with 2 rows being 12 units tall and the other 3 rows being 6 units tall, because I wanted to make…
Angolo, giunto raccordo per zoccoli spessore 1,2cm e H12cm
GoPro camera mount for H12Y MJX. Hardtop mount. DEMO:
Pentane is the five-carbon straight-chain alkane, a common lab solvent. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol plus proton and…
Cyclohexane is a six-carbon ring in the puckered chair conformation. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol plus proton and…
Tryptophan (C11H12N2O2) - Multi-Color 3D Molecular Model (Space-Filling Spheres) An accurate, educational 3D printable model of Tryptophan (C11H12N2O2) in classic Space-Filling (van der Waals / CPK Spheres) style. Ideal for chemistry…
In addition to a new look, the doors will also protect the model from scratches. It's best to use PLA filament.
In addition to a new look, the doors will also protect the model from scratches. It's best to use PLA filament.
I went to gridfinitygenerator.com and created a 2x5x12 and a 3x5x6 bin, then I used Blender in order to merge both bins to a single 5x5 bin with 2 rows being 12 units tall and the other 3 rows being 6 units tall, because I wanted to make…
Angolo, giunto raccordo per zoccoli spessore 1,2cm e H12cm
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
Witam Jest to "chyba" ostateczna wersja modelu dachu dla MJX Hyper Go H12Y. W pierwszej wersji model zaprojektowałem jako jedno częściowy wydruk, lecz ścianki które się drukowały pionowo nie miały dostatecznej wytrzymałości i dlatego…
