1 / 6
Dual-Filter Solder Fume Extractor: H12 HEPA & Carbon Filter | AC/DC/PD | No Supports — zdjęcie 1
1 / 6

Dual-Filter Solder Fume Extractor: H12 HEPA & Carbon Filter | AC/DC/PD | No Supports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

"This system doesn’t just move fumes around—it actively purifies the air"

Ocena
4,941 / 5
Polubienia
1295
Pobrania
1994
Wydruki
35
Wyświetlenia
22 945
Oceny
34

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Featured in 3Printr.com!
When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for you and everyone around.

What Makes This Fume Extractor Different?

This fume extractor is more than just effective—it’s the result of thorough research, testing, and valuable feedback. Unlike a simple fan, it uses a two-stage filtration system for comprehensive air purification:

  • HEPA Filter: Captures tiny particles and dust for a clean environment. (Why HEPA?)
  • Carbon Filter: Absorbs harmful gases, fumes, and odors for full purification.

For even more effective fume removal, you can attach a 125mm hose to the back of the extractor to vent fumes outside. 

Easy and Versatile Design for Everyone

This fume extractor is designed to be simple and adaptable. It’s fully support-free for easy 3D printing, uses readily available hardware, and offers three power options. Also no need to cut the fan cable, so you won’t void any warranties. Additionally, a handle can be added for easy portability.

To make the setup process as easy as possible, I’ve included clear wiring diagrams, a detailed assembly video, and step-by-step instructions.

----------------------------------------------------------------------------------------------------------------

Assembly Guide

  1. Select Your Power Version: Decide whether you want to use AC, DC, or PD power.
  2. Choose Your Additional Parts: Determine if you need any optional components, such as a handle.
  3. Gather Hardware and 3D Parts: With your power version and additional parts chosen, you’ll know exactly what hardware to buy and which 3D parts to print. 
  4. Follow the Wiring Diagram: Once you have all your components, refer to the electrical wiring diagram for proper connections.
  5. Watch the Assembly Video: Finally, follow the assembly video for step-by-step guidance on putting everything together.

----------------------------------------------------------------------------------------------------------------

Power Options - Choose What Works Best for You

Select your preferred power source for the fume extractor:

  • AC Power: Plug it into a traditional wall outlet (some electrical knowledge required).
  • DC Power: Uses a 12V DC jack, like common adapters for electronics.
  • PD Power (USB-C): Modern and convenient with USB-C PD adapters supporting 12V.

Important Note: For the AC version, please ensure that all AC wires are properly soldered and 

----------------------------------------------------------------------------------------------------------------

Parts List (Approximate Cost: €50)

Essential parts (all versions require these):

Note: The included active carbon filter restricted airflow, so I only used the HEPA filter. Alternatively, you can use a 16mm EPA sheet cut to size (120x120mm): AliExpress 

  • Active Carbon filter (Cut to size 120x120mm) - AliExpress 
  • Wire (22-20 AWG recommended, thicker may be stiff) - AliExpress 


Additional Parts (depending on chosen power source):

Please dont cheap out on power supplies. Use a well known brand. 

Optional Extras:

----------------------------------------------------------------------------------------------------------------

Wiring Diagrams:

  • AC wiring diagram
  • DC wiring diagram
  • PD wiring diagram

----------------------------------------------------------------------------------------------------------------

Additional:

  • HEPA vs. HEPA+Carbon Filter Comparison
  • PD Version Assembly

 

This extractor uses a E12 filter to balance airflow while still capturing the harmfull particles.

 
"Get the Files & save your lungs"

 

Updatelog: (day/month/year)

  • 16/12/2024: Added extra spacers and a custom file
  • 07/11/2024: Updated URLs
  • 11/10/2024: Remixes (share alike) allowed, mirrored version available.

Tagi