Wyniki wyszukiwania: har

Articulated Whale Shark

Dimensions (LxWxH) 186,9 x 66,7 x 33,8 mm (100% scale) Basic information The model is divided into 7 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility. The model was designed to…

Articulated Shark

No supports required. Just slice and print!! 4 Versions available: Shark_v4_A.stl: Original design, movable jaw Shark_v4_B.stl: Friendly face, movable jaw Shark_v4_C.stl: Original design, NON-movable jaw Shark_v4_D.stl: Friendly face,…

*~ Fully Printable ~* Butterfly Knife Balisong Design - CyberPunk Arasaka Remix Hardware Included In Print Files

Articulated Hammerhead Shark

Dimensions (LxWxH) 164,5 x 65,75 x 42,7 mm (100% scale) Basic information Print in place articulated Hammerhead shark. The model was inspired by the Great hammerhead shark, the largest species of all hammerhead sharks. It can grow up to…

Charger Port Cleaning Tool

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! New thinner version for USB C: printables.com/model/1164721-charger-port-cleaning-tool-usb-c-optimized Keep your devices clean with the Dual-Sided Port…

Articulated Great White shark (singlecolor & multicolor)

Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…

Fishing Rod "Sharky"

Fishing Rod “Sharky” — THE Perfect Beach Companion for Fishing Enthusiasts 🖨 100% printable – no extra hardware required (except for fishing line and hooks of course) ⏱ Fast print – ready in around 2 hours 🧵 Material efficient – under 50…

NEW VERSION 3.5 with XL Lid: Steamdeck USB-C Charger Cradle (for USA plug only)

Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…

Baby Shark Keychain

My son turned 16 and loves Mcgybeer's "Articulated Shark." So I made him a keychain version of the model. I scaled the design and added a loop to attach your keys to. I also attached the tail to the last body segment and made it so that…

The Elder Wand - Wizarding World of Harry Potter

I designed this Elder Wand from pictures after watching the Harry Potter movie series again in anticipation of Halloween. It is divided into two pieces so that it will print on smaller print beds, but have also included the full wand for…

Charger Port Cleaning Tool - USB C Optimized

Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Tip is thinner, handle with care! Keep your charging ports spotless with the Port Cleaning Tool V2! This optimized version is specifically designed for…

Cute Pokemon Pot Plants - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)

Articulated Shark

An articulated shark with moveable body sections, jaw and pectoral fins. It has a hidden slot (as shown in the picture) for adding a keychain. Original size: ~4.9 cm × ~9.6 cm × ~3.1 cm Upper teeth require support materials (see…

Harry Potter Bookmark

Printed with regular 0.15mm quality profile in Prusa slicer with PETG .

Adjustable Stand for Smartphones, Ipads, and Tablets :: 100% Printable :: No Hardware

Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…

Pixel Watch Charging Stand v5

This stand will only work with Pixel Watch 1, for Pixel Watch 2 please use this stand: https://www.printables.com/model/615266-pixel-watch-2-charger-stand This stand includes a cutout to route the wire so it's not visible. For best…

Golden Snitch Harry Potter

Golden Snitch Harry Potter

Sharpie Hilt - Pen is Mightier than the Sword

Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…

Flexi Tiger Shark (print-in-place)

[Update] ---2025/10/07--- Reduced the memory size of the body model. ------------------------------------------------------------------- This is a Flexi Tiger Shark. It can be assembled simply by inserting the head part into the main…

Harry Potter ornaments / pendants

harry potter tags for Christmas, Pendants or keychains

Makita Battery Charger DC18RC Wall Mount

Thanks to blueOcean for making this tool mount. I traced it in OnShape and removed the french cleats and added some screws. The charger fits perfectly. Don't mind the multiple colors, I ran out of filament in the middle of the print.…

EV Charger Holder J1772

Tired of your charging cables laying all over the place, tripping over them at night? Why are you in the garage in the dark, at night?? The ⚡ EV Charger Holder J1772 ⚡ is designed to hold an at home Level 2 EV charging plugs and cables…

Golden Snitch - Harry Potter

This is a digital 3D printable model of the Golden Snitch from the Harry Potter series. It’s designed to work with both FDM and SLA printers. The wings can be printed flat, which makes them especially easy to print on FDM machines. After…

Apple Watch charger

This holder fits Apple watch 6, printing with carbon filament makes a nice finish, wood also look great. Printing in a slight angle avoid using support in the back. I included a sliced file for Prusa mini, it is printed in an angle to…

MagFace - iPhone and Apple Watch MagSafe Charging Station

I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…

Nintendo switch style apple watch charger

No selling of this model is allowed at all, since I am already selling it on Etsy . Tips for printing: You will need 9 of the round buttons, 2 of the joysticks and one of everything else. The middle section should be printed on its side…

Polestar 2 Charger Snow cover

Inspired by the design on tinkercad by örjan https://www.tinkercad.com/things/ejnXN5An6ae And by the design by Polestar itself for a protective snow cover for the chargepoint I designed this. The portrusion is meant to keep snow mostly…

CHARGING PORT DUST REMOVER - USB-C CLEANER - (Tested)

Also tested with other charging ports Inspired by the box openers

Project Synthara - Generative Design FPV Drone Frame 3.5 Inch

Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…

Stackable hard drive storage

Provides long-term or transportation storage for four hard drives. Feet can be printed and inserted into the feet slots in the bottom to provide cushier surface contact and make the storage cages stackable. While I printed the feet in…

HarvestRight Freeze Dryer Tray Stacker

[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…

Steam Deck USB-C Charger Cradle (EU Plug Version, 1.5m cable length)

2026 Update: It looks like since the original launch of the Steam Deck some chargers might come with different length of cable now. My original release charger has 1.5m of cable and it is already a tough fit even when rolled up tightly.…

Protective Hard Drive Case

Maximum HDD dimensions: Length 148 mm Width 102 mm Height 27 mm HDD is attached from bottom with a 95.25 mm by 44.45 mm screw pattern. Check if your hard drive fits and has this mounting pattern on bottom. Printing To assemble one case,…

3D Scharnier 60x60x7mm

(DE) Ich habe das Scharnier eigens für meinen selbstgebauten 3D-Drucker Wärmeschutz mit 5mm Plexiglas-Fronttüre (420 x 340mm ca. 1Kg Gewicht) konstruiert. Man kann es in PLA oder auch in PETG drucken. Ich habe die Scharniere in PLA…

Grifinity Charger Cable Organizer Holder

PLEASE NOTE: THIS IS SIZED FOR ORGANIZERS FROM DFV Tech , PRINTED AT 120% SCALE. This storage organizer is made for the excellent Gridfinity collection from Zack Freedman. This Gridfinity holder is designed to hold the Version 3 -…

Logo Harley Davidson

Logo is made with 3 color changes per layer for those who don't have a color system

Oral B Toothbrush Charger Holder (US/NA Plug)

Reworked the German plug version of this Oral B toothbrush charger holder to accommodate the US plug model. The extra length of wire can be tucked into the bottom cavity for that sleek look. The plug holder has small tabs to retain the…

Samsung Galaxy Watch 4 & Cell Phone Charging Station.

Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.

Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare)

At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…

Tiger Shark Clip

Inspired by a print Sharkz: https://www.thingiverse.com/thing:910216 But I completely redesigned it from scratch (so I don't really think of it as a remix). I wanted it to be a Chip Clip (Crisp Clip in British). Here is what I added: Be…

iPhone 8/SE Case - Support free voronoi designs (hard and soft versions)

Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…

Onewheel Pint charger port plug

Charger port plug for Onewheel Pint. I lost mine so I modelled one myself. Tested with PLA and fits tightly. Apologies for my beat up Pint. Print instructions 0.2mm layer height. Supports from buildplate. Everything else at your discretion.

Harley Davidson Plaque 2

I made this for a friend, they loved it 9" plaque If anyone needs the vector file please email me at [email protected] I added a hook and raised the white lettering so you can swap filaments in order to achieve a 3 color plaque Print…

Tape and Sharpie Holder

I Designed a stylish Tape roll and Sharpie marker holder. It fits perfectly inside a 77mm diameter tape roller and keeps your supplies neat and accessible. The holder has a special compartment to securely hold your Sharpie, making sure…

iPhone Charge Cable Protector

A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…

Tesla V4 Supercharger Phone Charger

Material black and white filament (PLA, PETG, …) USB-C or lighting cable concrete or plaster for base (optional) Printing side panels (white) Printing the side panels is quite tricky with a FDM printer because of all the wobble. I printed…

Low Poly Charmander (No Supports)

Remix of Weberowsky's Charmander from Pokemon

Charging Stand for Pixel Watch 2 & 3 - 100% printable - no support

Charging Stand for Pixel Watch 2 & 3 Easy to use with the original charging cable of the Pixel Watch 2 & 3 Note: you'll need to mirror the model for the left wrist, as I wear my watch on my right wrist. Print settings: 2 perimeter 0,2…

Shark Vacuum Wall Mount

The Shark Vacuum I have (Shark IZ362H) has a nice feature where the main unit can hang from one of the extensions. I thought it would be great to be able to mount the vacuum from the wall, so I designed this to suit! The wings on either…

Baby Shark Hoody Beads

I tweaked McGybeer's the design and added a loops to make the baby shark into hoody beads. I also attached the tail to the last body segment and made it so that it prints vertically as at the half scale I could't get the tail's ball joint…

Google Pixel Watch 2 Charging Stand

This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing…

Low Poly Whale Shark

A whale shark model in low-poly style. Default orientation set the mouth part downwards. The model could be unstable during printing since it has a small bed side. Support materials or brims would prevent it from collapsing. GCODE set up…

RYOBI 40V Pass-Thru Charging Adapters

I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…

3D Printable Flexible Shark Toy

Join here to get access: https://www.patreon.com/kogi3d Material: PLA (recommended) Layer Height: 0.2 mm or finer Infill: 15% or higher Supports: Not required. If you experience any adhesion issues, especially with the head piece,…

Dremel Drill bit sharpener

Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…

Flexi Shark

I have been making flexi toys lately so I thought that I would make a shark because I like them. This one is pretty cool, I added more things such as the, mouth, eyes, and gills. If you like this model, make sure to follow me and check…

Philips OneBlade Stand, equipment storage and charging dock

I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…

Nothing/CMF watch 2 Pro charging dock/stand

Nothing/CMF watch 2 Pro charging dock/stand

Pixel Watch Charging Stand

Quick remix to hold the Pixel watch charger. Fredslund's original design was a perfect starting point for a functional and stylish place to charge your Pixel watch.

Little Josef Prusa Character - SINGLE COLOR

Action figure of Josef Prusa

Sharps Disposal Can for Utility and Hobby (X-Acto) Blades

This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…

Pixel Watch charger for Pixel Stand (any generation)

Date Description 18/09/2024 Updated models for gen 2 & 3. Slightly enlarged the ring and the cable groove for an easier fit. 03/01/2024 Fixed a mix-up in the files. I had not uploaded the right ones for the Pixel Watch 2. 02/01/2024…

BMW Wireless Charging Mod F3x F8x I01

Remix von https://www.thingiverse.com/thing:4599572 Schriftzug auf BMW abgeändert. Erweiterung bzw. Austauschteil für den Original Schieber am Wireless Charger. Passend auch für F3x, F8x und I01 (I3) mit Wireless Charging Ablage. Die…

Hardworking dwarfs, gnomes for the garden

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important: If by chance the…

Aircap Fengda and Harder & Steenbeck airbrush

Tip dry can occur during airbrushing with acrylic paint, causing the airbrush to splash. By using this air cap, the needle can be wiped clean with a cotton swab. The air cap can be used on a Fengda airbrush as well as a Harder and…

Type-C/Lightning Tesla SuperCharger Phone Charger

Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…

Cupra Born - Charging Tray Optimized

Based on the idea I found in a German forum, I have created an optimized version of the Qi charging tray for the CUPRA Born. If you are receiving messages that your smartphone cannot be charged by the charging cradle of your Born, this…

HarvestRight Freeze Dryer Drain Plate

[update] I created a new version ( https://www.printables.com/model/663843-improved-harvestright-drain-hose-plug ) that helps maintain a good drainage angle better. You probably want that one. [/update] Didn't like the hose just resting…

harry potter pendant / keychain

5 minute print

Bosch eBike Charger Wallmount (added removable plug)

This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…

Case for a Raspberry Pi 4b + Waveshare POE HAT B or C

Cases for Raspberry Pi 4B with POE Hat from Waveshare. PoE HAT B with OLED screen or C without the screen. Bottom and top cases snap together without the need of screws and/or nuts https://www.waveshare.com/poe-hat-b.htm…

Smartphone and Tablet Stand with Charging Cable Support / Handyhalterung und Tablethalterung mit Ladekabelunterstützung

I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…

Oral B Wall Mount Charging Station

Use double-sided tape for mounting. There are pre-drilled holes in the back of the model if you want to mount the charging station to the wall with screws. Added custom text models, Mom, Dad, Prusa …

charnière porte coffret

charnière de remplacement pour porte de tableau électrique LEGRAND EQUINOXE

Bins with Label Shelf - For Harbor Freight Medium Parts Organizer

Background The natural state of every garage or shop is disorder and its a constant and never ending battle keep some semblance of order. A good organization system helps with that. As a maker I also found myself buying lots of assorted…

MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free

MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free September 29, 2024 Update: Added Cable Organizer compatible with thicker 4,5mm diameter braided cable. Product Description: The MacBook Pro cable organizer clip is a…

Pax 2/3/Mini Vape Charger-Case Combo + Storage

This is a remix of the pax storage case from thingiverse by maker giek2000 . I modified this case to include an insert for the pax charger, so the device can be charged while being stored, combining all accessories in one single neat…

Pixel Watch gen 1 charger with cable winder and plug mount (USB-C & USB-A)

Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…

Apple Watch Charging Stand

This is a remake of my low-poly Apple Watch charging stand, with a larger diameter and obviously not low-poly. I think this looks much better. For the best finish make sure your seams are aligned to the rear of the model, otherwise using…

Enclosure for Waveshare ESP32-S3-ETH OV2640 CAM LAN RJ45 POE

This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…

Bosch eBike Charger Wallmount with 2-Layer Spool

This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. This version allows to neatly wrap the DC cord around the 2-layer spool integrated in its base. I made this version…

Robot Shark.

Robot Shark

WaveShare 4.2“ e-Paper case - symmetrical and without holes

WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…

JBL Charge 3 battery cover (upgrade)

UPGRADE JBL Charge 3 battery cover with support for rubber part. Gasket for this cover is here: https://www.printables.com/cs/model/453487-gasket-for-jbl-charge-3-battery-cover-not-for-orig

Ryobi Batttery Charger Wall Mount - 18V ONE+

Older ryobi battery chargers were wall mountable, but the newer ones which ship with their drill and driver sets are an odd wedge shape which seems designed to prevent fixing anywhere. This model solves that. No fuss, just print and hang.…

Bruder RAM 2500 Hardtop Nástavba

Nástavba, Hardtop na vůz Bruder RAM 2500 Nástavba je sundavatelná, nebo přilepit

Pencil Sharpener Desk Tidy Storage for Office/Home Desks

Add this nice Office Accessories to your desk to store pens/pencils or whatever you wish. Designed by me - D3D Creative (Design inspired by suck uk wooden version). Main Body has two version, with and without supports. Blade is thin, I…

Toothpaste Squeezer - Hand charming Version

Remix of @TinkrMakr model to be a little bit more hand charming. I beveled the edges to make it feel better.

Ryobi One+ 18V Battery Charge Adapter for Solar / Powerstation

I think Ryobi is missing a huge market opportunity. I have a ton of Ryobi Tools and Batteries (1000+ Wh worth!). I've made several prototypes that use Ryobi 18V batteries to charge USB ports or run a 13.8V regulated cigarette socket. I'd…

IKEA Skadis Valve Index Holder with Charging Function

Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…

Harry Potter Proclamations - customisable via top insert for wall or Xmas tree decoration

Here we have a customisable proclamation display, as seen in the Harry Potter series these can be mounted on the wall via nail and chain, or command strip. They can also be used as Xmas tree decorations the key part, is they are…

Shopping Cart Coin - Token - Harry Potter Deathly Hallows

I designed this cute shopping cart coin with the Harry Potter Deathly Hallows emblem. Ho disegnato questo simpatico gettone per il carrello della spesa con l'emblema dei doni della morte di Harry Potter.

JBL Charge 5 case

Printed parts : charge 5 case band x4; charge 5 case handle x1; charge 5 case side x2. Screws: m3 x10 ;m4 x6. Nuts : m3 x10.

Harry Potter Scout woggle

Neckerchief or scarfring for Harry Potter for Scout or Cub Scout. Pasa pañuelos para los scouts o lobatos

Ramses II (Der Zerstreute Pharao) pyramid

Do you need a spare pyramid for board game Ramses II? You come to the right place. It fits nicely and even can be stuck on top of original pyramids.

Charnières pour porte de compteur EDF

En plus de la serrure (Voir https://www.prusaprinters.org/prints/123226-serrure-pour-porte-de-compteur-edf) une des charnières de la porte de mon compteur EDF était cassée et la porte ne fermait plus. Je me suis donc lancé dans la…

Oral B Universal charger stand

Oral B electric toothbrush holder with cable/ plug tidy. Fitting most sizes including the newest IO circular designs. Wrap-around cable design with the secure plug end holder hidden at the bottom. Mounting options : Screw or adhesive…

Cute Harry Potter and Co.

Hello, Welcome to my profile, full of models and miniatures :-) I have Harry Potter and company for you to diorama, or just for play. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If by…

Heltec V3 Case with 18650 cell and TP4056 charge controller

My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…

Harry Potter themed strongbox with 8-digit combination lock

This is a Harry Potter themed strongbox with a programmable 8-digit combination lock. The lid is held firmly shut by the powerful locking charm Colloportus to ensure that only one properly schooled in the art of witchcraft and wizardry…