Counting matching models…
No supports required. Just slice and print!! 4 Versions available: Shark_v4_A.stl: Original design, movable jaw Shark_v4_B.stl: Friendly face, movable jaw Shark_v4_C.stl: Original design, NON-movable jaw Shark_v4_D.stl: Friendly face,…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
This is deceivingly hard 8 piece durable puzzle box designed to be difficult to solve and simple to print. Any rigid material should work. However 2, 5mmX1mm circular MAGNETS ARE NEEDED. Other than that and a little glue it's ready to…
Print approx. €7.48–€9.14 excl. taxPreliminary estimate for one variant
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
I designed this Elder Wand from pictures after watching the Harry Potter movie series again in anticipation of Halloween. It is divided into two pieces so that it will print on smaller print beds, but have also included the full wand for…
Print approx. €4.89–€5.97 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. Tidy cable storage inside the dock. Size-specific versions for your Apple Watch. Easy to print without supports. Choose your…
Print approx. €3.28–€4.00 excl. taxPreliminary estimate for one variant
I prepare Charizard for prusa Mini, but you can adjust the size if you want a Mega-Charizard ;) You can find here the original file : https://www.thingiverse.com/thing:4750833 Enjoy
Print approx. €9.62–€11.76 excl. taxPreliminary estimate for PETGSource material: PET
Printed with regular 0.15mm quality profile in Prusa slicer with PETG .
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for one variant
This stand will only work with Pixel Watch 1, for Pixel Watch 2 please use this stand: https://www.printables.com/model/615266-pixel-watch-2-charger-stand This stand includes a cutout to route the wire so it's not visible. For best…
Print approx. €3.83–€4.68 excl. taxPreliminary estimate for one variant
Golden Snitch Harry Potter
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
[Update] ---2025/10/07--- Reduced the memory size of the body model. ------------------------------------------------------------------- This is a Flexi Tiger Shark. It can be assembled simply by inserting the head part into the main…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
harry potter tags for Christmas, Pendants or keychains
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Tired of your charging cables laying all over the place, tripping over them at night? Why are you in the garage in the dark, at night?? The ⚡ EV Charger Holder J1772 ⚡ is designed to hold an at home Level 2 EV charging plugs and cables…
Print approx. €5.37–€6.56 excl. taxPreliminary estimate for PETGSource material: PET
This is a digital 3D printable model of the Golden Snitch from the Harry Potter series. It’s designed to work with both FDM and SLA printers. The wings can be printed flat, which makes them especially easy to print on FDM machines. After…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for one variant
Inspired by the design on tinkercad by örjan https://www.tinkercad.com/things/ejnXN5An6ae And by the design by Polestar itself for a protective snow cover for the chargepoint I designed this. The portrusion is meant to keep snow mostly…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for PETGSource material: PET
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for PETGSource material: PET
Provides long-term or transportation storage for four hard drives. Feet can be printed and inserted into the feet slots in the bottom to provide cushier surface contact and make the storage cages stackable. While I printed the feet in…
Print approx. €18.82–€23.00 excl. taxPreliminary estimate for one variant
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for PETGSource material: PET
Maximum HDD dimensions: Length 148 mm Width 102 mm Height 27 mm HDD is attached from bottom with a 95.25 mm by 44.45 mm screw pattern. Check if your hard drive fits and has this mounting pattern on bottom. Printing To assemble one case,…
Print approx. €8.06–€9.85 excl. taxPreliminary estimate for one variant
(DE) Ich habe das Scharnier eigens für meinen selbstgebauten 3D-Drucker Wärmeschutz mit 5mm Plexiglas-Fronttüre (420 x 340mm ca. 1Kg Gewicht) konstruiert. Man kann es in PLA oder auch in PETG drucken. Ich habe die Scharniere in PLA…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Print & acrylic draw
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €17.13–€20.94 excl. taxPreliminary estimate for one variant
Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…
Print approx. €9.67–€11.81 excl. taxPreliminary estimate for one variant
Inspired by a print Sharkz: https://www.thingiverse.com/thing:910216 But I completely redesigned it from scratch (so I don't really think of it as a remix). I wanted it to be a Chip Clip (Crisp Clip in British). Here is what I added: Be…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Charger port plug for Onewheel Pint. I lost mine so I modelled one myself. Tested with PLA and fits tightly. Apologies for my beat up Pint. Print instructions 0.2mm layer height. Supports from buildplate. Everything else at your discretion.
Print approx. €0.32–€0.40 excl. taxPreliminary estimate for one variant
Pokemon Charizard
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for one variant
A small twisted piece that wraps around the charge cable to protect the ends from being damaged from frequent pulling. This file is suitable for the original iPhone charge cable's size. May not be suitable for other cables. Print…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Material black and white filament (PLA, PETG, …) USB-C or lighting cable concrete or plaster for base (optional) Printing side panels (white) Printing the side panels is quite tricky with a FDM printer because of all the wobble. I printed…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Charging Stand for Pixel Watch 2 & 3 Easy to use with the original charging cable of the Pixel Watch 2 & 3 Note: you'll need to mirror the model for the left wrist, as I wear my watch on my right wrist. Print settings: 2 perimeter 0,2…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €7.69–€9.40 excl. taxPreliminary estimate for one variant
.3mf file plus gcode for printing charizard with your MK3S+ with MMU2S This model needs to be printed with supports. Please be VERY careful and patient when removing the supports, because it can be quite tricky. Color layout for the…
Print approx. €22.12–€27.04 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
Neville Longbottom Wand with some support needed on 2 of the parts. I printed it at .20mm with 15 % infill, but it probably doesn't need that much. I took the original model here, decreased the amount of triangles, and split it into…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for PETGSource material: PET
Use Case : Printed at 101% scale to avoid any threading issues with my Dremels. Printed all four versions of the sharpener and was able to thread onto my Dremels without any clean-up or post-processing. Accessories : Dremel Lite 7760 -…
Print approx. €10.70–€13.08 excl. taxPreliminary estimate for one variant
I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…
Print approx. €10.68–€13.06 excl. taxPreliminary estimate for one variant
Nothing/CMF watch 2 Pro charging dock/stand
Print approx. €3.75–€4.59 excl. taxPreliminary estimate for PETGSource material: PET
Quick remix to hold the Pixel watch charger. Fredslund's original design was a perfect starting point for a functional and stylish place to charge your Pixel watch.
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET
Steve Harrington : Stranger Things
Print approx. €4.75–€5.80 excl. taxPreliminary estimate for one variant
Print with tree towers, layer of 0.2mm and fill 15%
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
Date Description 18/09/2024 Updated models for gen 2 & 3. Slightly enlarged the ring and the cable groove for an easier fit. 03/01/2024 Fixed a mix-up in the files. I had not uploaded the right ones for the Pixel Watch 2. 02/01/2024…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important: If by chance the…
Print approx. €10.73–€13.12 excl. taxPreliminary estimate for one variant
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
Print approx. €0.90–€1.11 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) Bring the fiery spirit of Poke to life with this highly detailed 3D printable model ! Designed for FDM and resin printing, this model captures the essence of the beloved fire-type with precision.…
Print approx. €3.59–€4.38 excl. taxPreliminary estimate for one variant
NOTE! Im not affialted with Pokémon in any way with this model. I tried making Charizard from Pokémon with makerlabs printmon it is cute so go print it if you want the 3mf version also has multi color for the AMS from Bambu Labs You need…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Based on the idea I found in a German forum, I have created an optimized version of the Qi charging tray for the CUPRA Born. If you are receiving messages that your smartphone cannot be charged by the charging cradle of your Born, this…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Update: I have added a new version that has thinner walls. I made the inner walls angled to run parallel with the exterior walls. They are 3mm thick and should be plenty strong for normal usage. The cord sits inside much better without a…
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for one variant
5 minute print
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €11.72–€14.33 excl. taxPreliminary estimate for one variant
This bracket mounts your BlueSCSI v2 in your vintage Macintosh hard drive bay. Note: This is NOT compatible with the 2023.10a board! For the 2023.10a version, you need this design: Features There is a slot in the side to make firmware…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Use double-sided tape for mounting. There are pre-drilled holes in the back of the model if you want to mount the charging station to the wall with screws. Added custom text models, Mom, Dad, Prusa …
Print approx. €3.27–€4.00 excl. taxPreliminary estimate for one variant
charnière de remplacement pour porte de tableau électrique LEGRAND EQUINOXE
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I was not able to find a pin cover for the battery connector of my eBike (Pedelec) to buy. There are models available for the earlier Bosch system, but I didn't find any for the (new) Bosch Smart System (BES3), hence I designed my own.…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the pax storage case from thingiverse by maker giek2000 . I modified this case to include an insert for the pax charger, so the device can be charged while being stored, combining all accessories in one single neat…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Updates since initial upload: Date Description 02/23/2023 Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a remake of my low-poly Apple Watch charging stand, with a larger diameter and obviously not low-poly. I think this looks much better. For the best finish make sure your seams are aligned to the rear of the model, otherwise using…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Robot Shark
Print approx. €4.20–€5.14 excl. taxPreliminary estimate for one variant
Add this nice Office Accessories to your desk to store pens/pencils or whatever you wish. Designed by me - D3D Creative (Design inspired by suck uk wooden version). Main Body has two version, with and without supports. Blade is thin, I…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
I think Ryobi is missing a huge market opportunity. I have a ton of Ryobi Tools and Batteries (1000+ Wh worth!). I've made several prototypes that use Ryobi 18V batteries to charge USB ports or run a 13.8V regulated cigarette socket. I'd…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Samsung Galaxy Watch 4 charger dock
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
Neckerchief or scarfring for Harry Potter for Scout or Cub Scout. Pasa pañuelos para los scouts o lobatos
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE CHARMANDER KEYRING A 3D keychain featuring Charmander, showcasing his adorable and fiery design, perfect for fans who want an accessory that reflects their playful spirit and love for…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have Harry Potter and company for you to diorama, or just for play. Very cool characters. It is suitable for coloring. My kids absolutely love it :-). Important: If by…
Print approx. €9.79–€11.97 excl. taxPreliminary estimate for one variant
My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…
Print approx. €3.11–€3.81 excl. taxPreliminary estimate for one variant
This is a mounting point for Lenovo Legion 300W and 230W charger. It's designed to be attached to the underside of a table so that the charger isn't laying on the floor. You can also quickly and easily unattach the charger if you need to…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
This is a Harry Potter themed strongbox with a programmable 8-digit combination lock. The lid is held firmly shut by the powerful locking charm Colloportus to ensure that only one properly schooled in the art of witchcraft and wizardry…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €13.26–€16.20 excl. taxPreliminary estimate for one variant
Make Your Own Custom Charing Station using these 3D Printed clips Go have a look at your current charging setup now, I bet the wires are all tangled! I have included designs for a basic charger station that has cable channels on the back.…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for one variant
ENG Sharpen blocks of dressmaker's chalk with this sharpener. Sharp edges allow you to draw fine lines on your fabrics. It is very easy to use just move the block of chalk back and forth in the V-shaped groove at the top, until the…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €7.20–€8.81 excl. taxPreliminary estimate for one variant
Hello, I have for you a Realistic Predator figure, a space warrior. The figure is suitable for an exhibition for fans of the Predator movie and games. For a diorama with a space theme. 2 STL files, one full figure and the other is an…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0,2 (Recommended) Supports needed Scale it as you like :)
Print approx. €9.51–€11.62 excl. taxPreliminary estimate for one variant
Last minute print for the year ;) Set to 3mm height scaled to 70% in slicer (effective height 2.1mm) 100% infill Octagram Spiral has a nice effect on the top surface! I printed it in PETG, because I had no PLA in green color…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
I created a bracket for the Parkside 12V wall charger IKEA Skadis. You need to print in portrait, use supports and I recommend a brim. You can use my attached 3mf file where everything is properly set up and tested. I recommend first…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
I figured this would make a nice display piece and be fun to paint. Instructions: Print it on its side at about a 45 degree angle with supports to reduce the stepping effect.
Print approx. €5.23–€6.39 excl. taxPreliminary estimate for one variant
About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This box supports following components: Raspberry Pi 4B Waveshare 4.3" DSI display ( https://www.waveshare.com/wiki/4.3inch_DSI_LCD ) Noctua 40mm 5V fan - NF-A4x10 5V PWM 1-channel relay (unfortunately not exactly a typical one:…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Balmbu Lab X1C: For best results models have to be scaled up by 10% so the border lines will be thick enough for printing with 0.4mm nozzle. or line width in print settings need to be changed down to 0.35mm. Embark on a delightful reading…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Low-Poly model of a 1969 Dodge Charger 500 HEMI. Included are functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This staple of American muscle cars is at roughly 1:25 scale. Tolerances…
Print approx. €7.00–€8.56 excl. taxPreliminary estimate for one variant
I made a book holder from the movie harry potter from the logo of the deathy hallows without support line height 0.2 UPDATE 23 MARCH 2023: I made a 2nd version so that it remains more stable with the help of a book.…
Print approx. €4.38–€5.36 excl. taxPreliminary estimate for one variant
This allows you to remove the 2 to 1 hose adapter and use a single 4" hose. It has a single hole for the original screw that is used to hold the original adapter in place. I used some thin foam insulation tape to help make the connection…
Print approx. €5.39–€6.59 excl. taxPreliminary estimate for PETGSource material: PET
This handy cable organiser is perfect for travelling or when you are simply tired of constantly untangling cables. Strengths: sturdy design fits any cable (fits 2m long 4mm thick cables easily) Assembly instructions: insert cable in its…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
Charge ore store your Apple Watch appropriate on your IKEA SKADIS pegboard. Maybe this model is perfect for you. For those who are creative, i have included the original Fusion 360 files. Happy printing! Recommended print settings:…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
4mm base with 0.8mm lettering sticking out Strong keychain i Put 100% infill for better strength
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Designed and Printed for a co-worker who needed to hold chrome books for his children. It is made to fit almost* any laptop from a thin MacBook-Air to a Chromebook with a hard-shell case on it. This is a large print, please be sure to…
Print approx. €23.83–€29.13 excl. taxPreliminary estimate for one variant
Harb is a small excursion steamer that fills both in the harbour and in the lakes of this world at home. What he doesn't like is the rough, open sea. High waves can make him capsize due to the high centre of gravity. Since you don't have…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
[EN] It is a common problem for the Twizy that the hinges break, because the material is not very thick. If the charging flap is not closed properly the vehicle will not move. Normally you have to replace the whole flap that might break…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Silueta de Charles Chaplin. Se puede imprimir en tres capas de diferente color. Decorativo.
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Standing figure of Harihara carved from a single slab of buff-coloured sandstone. Date: 1000 (circa). Found in India, possibly from Khajurāho (north). Now located in The British Museum. Photos taken in November 2018 with a Sony a6000 and…
Print approx. €10.86–€13.28 excl. taxPreliminary estimate for one variant
If you’ve lost or broken the original light mount (Thule part no. 1500055273), this 3D-printed part restores the ability to attach the LED rear light securely to your child trailer. It clips onto the rear frame bar and holds the light…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Sun Pharaoh : Plants vs Zombies
Print approx. €14.09–€17.23 excl. taxPreliminary estimate for one variant
