Liczymy pasujące modele…
Pay attention to where the legs and arms are place. They are different. The joint's depth in the arm and the leg is different. build it carefully. Print in PETG with tree supports for best results. OVERHAUL UPDATE 11/13/25: Added Harken's…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Harke für das auflockern der Erde bei Indoor Pflanzen. Sowie ein Schaufel, mit längerem Griff.
I shortened the original model to 20 cm directly in PrusaSlicer. Isn't 100% perfect but close. Fits on the Prusa mini.
A funny request from one of my patrons :-) Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
Harken from die of death with extra headpieces. I cant print this out rn, but i wanna ask if anyone does print it, tell me what you reccomnd i shud change, or adjust.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Scale to 10% for very tight fit. 11.5% or 12% for a loose but snug fit. Bic Buddies are great companions for smokers and non smokers of all walks of life. I have a lot more Buddies to post! This is one of the coolest designs I have ever…
Der Klebehaken ist die perfekte Lösung für eine bohrfreie Montage von Bildern und leichten Gegenständen an der Wand. Er ist kompatiebel mit dem Pattex „Kleben statt Bohren“-Klebeband. Mit einer Klebefläche von 22 x 45 mm sorgt er für…
This is a replacement i designed for the worn out trim cap on top of the Harken MKII furler. It consist of two halves so that it can be fitted without the need to disassemble the furler system. A strong adhesive or epoxy is needed to join…
Man benötigt 4 - 6 Harken an der Unterseite, um das Gewischt der PS4 aufzunehmen. An der Oberseite auch weniger, da dort nur das Umkippen verhindert werden muss. Im Gehäuse der PS4 ist eine Ausbuchtung, 1 Harken knapp davor und danach…
Drucken Sie das Objekt am besten in PETG!
Kabelharken für den Kärcher WD3 Für das bessere aufrollen des Kabels beim Kärcher WD3. Der Harken wird von unten mit einer Schraube gesichert. Gedruckt mit Sunlu PLA Matte 50% Füllung.Kabelharken für den Kärcher WD3 Für das bessere…
Harken design of carbo block line guards. full and half guards for 56 and 75mm carbo blocks. Instructions link: https://harkenblockheads.com/feed/wp-content/uploads/2022/09/Carbo-Line-Guard-Instructions.pdf Line Guard Types - The half…
Der Türharken ist ideal um an Türen, Jacken oder Hantücher zu hängen
Used to prevent the traveler lines from fouling each as often experienced in small boat mainsheet traveler systems. Print in UV resistant material such as PETG. Printed 0.2mm layer height, 15% infill.
I wanted to put a Harken 150 cam cleat on my Tethrd One Stick for saddle hunting and needed something a flat top to secure the cam cleat to. I designed and printed this using Polymaker ASA. I had to cut off the DynaLoc tab and drill holes…
I have a sailboat. The spinnaker sheets (big sail control lines) come back to the stern pulpit and through a H2600 AirBlock. This dangles and bangs. There is no obvious way to hold it in position, so I made this. It is a loose fit in the…
This is a flag pole holder for the Harker Outdoors EDC Camper to attach to the top rail. It easily attached and can accommodate up to about 1" Dia. flag pole. (See adapter separate for smaller dia. pole) I recommend PETG filament for…
This is Gluepad for the Harken 3288 Compsite Eyestraps. I designed this so dont have to drill holes in my boat. The component is not designed to carry even remotely any load. It is certainly enough to attach a cord to it and hang up the…
Ein Haken für Hobby wonwagen für die Vorhang leiste zumrein drehen
harken für das Ikea regal mit dem Namen IVAR
This is a replacement pawl for a Harken 75mm Cheek Ratchamatic Block. Category: Sport & Outdoors
this is a cover for the Harken Triple Block, that we use on the Melges 24 on the Vang. We glued it with a strip of 3M in place. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0,1 Infill: 50…
A bit of a bodge, but it works. Would suggest printing in something like ASA, the PLA one I printed lasted about 6 months of racing, which isn't bad considering. I've just printed a handful of them to replace as they break.
harken from game DIE OF DEAD in ROBLOX
Gutter attaches to the existing L Track on the Harker Outdoors canopy campers on the very front end of the canopy up next to the hinge. It is designed to work on either side and attaches easily with two L Track 3/8 stud bolts (don't…
Pieces to fix a damaged Harken C car Printed in PETG 2mm layer height
This handhold is designed as a near drop-in replacement for the Harken handholds, used on boats like the Soling and Yngling. It is modeled to match the original as closely as possible, but there may be small deviations, so it is a good…
Add supports yourself, and not articulated, it's a statue.
I have a sailboat. The spinnaker sheets (big sail control lines) come back to the stern pulpit and through a H2600 AirBlock. This dangles and bangs. There is no obvious way to hold it in position, so I made this. It is a loose fit in the…
Bram Stoker's Dracula - Jonathan Harker (Keanu Reeves) - 1992 3D printable model.
