Liczymy pasujące modele…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Start with Black At layer #8 (0.76mm) swap to Orange At layer #11 (1mm) swap to Beige At layer #18 (1.56mm) swap to White for the rest.
UPDATED 2023-07-25: Added a guide on how to use this test, plus other additional info. If you're interested just in using the test, don't read it whole; just read the “What is the Blending Distance (BD)?” section and do the steps of…
There are several ways to make Ornaments + Hueforges, the easiest way was to just add a hole in Bambu studio, so I decided to bring an ornament designed from Fusion 360, and combine both. This model was not generated using AI,the photos…
This is the official TD(Transmission Distance) step test developed by the creator of HueForge(listed here with his permission). This test can be used to test the TD of your filament TDs. This is the LEDs I used for the light box…
Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions : Start with Black At layer #8 (0.66mm) swap to Jade White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PLA Smartfil Reciclado Negro Transmission Distance: 0.2 PLA 3DFils Galactic Red Transmission Distance: 5.8 PLA 3DFils Galactic Gray Transmission…
Try out this hummingbird generated using HueForge software! Play around with different colors and swap heights to customize the look. Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO Black Transmission Distance: 0.3 PLA JAYO Gray Transmission Distance: 2.5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA…
I created this minimalist floating Frame for my HueForge Filament Paintings. Included are the Fusion360 file and a .step file In Fusion 360 just change the user parameters “objectwidth” & “objectheight” to match your painting dimensions…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Pro Black PLA PolyLite Steel Grey PLA PolyLite…
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm. Also, use a brim to prevent lifting in corners. Filaments Used(Try to use similar colors to match my print): Black - Hatchbox PLA Dark silk blue - Generic PLA…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #6 at 0.56mm Red until layer #19 at 1.6mm Pure Yellow until layer #23 at 1.92mm White for the rest.
100% infill first layer height .16 layer height .08 colors and swaps black layers 1-4 red layers 5-7 grey/silver layer 8 white layers 9+ few other settings I like to use are inner/ outer wall 150mm/s infill overlap 25% hilbert curve top…
Hueforged T-rex 2 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade…
HueForge Butterfly I created for the Polymaker Blue Start Pack of Filaments. Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Blue Starter Pack :…
The size is 133x200. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #5 at 0.48mms Purple until layer #9 at 0.8mms Green until layer #15 at 1.28mms White until layer #26…
Owl generated on Midjourney and STL generated with HueForge. No MMU or AMS required. Small enough to print on the Prusa Mini, but I included the HueForge project if you'd like to mix things up a bit. Print at 100% infill with a layer…
HueForge Fire Dragon created for the Polymaker Fire Color Set . Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Fire Color Set: Panchroma Matte…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ eSun Black PLA+ Sunlu Red PLA+ Sunlu Yellow PLA+ Sunlu White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to red At layer…
I liked the model from Houston713Texan , but I found another image with the same characters placed in a different order and with more details. I’m really happy with the result. I used Hueforge to create this 240 x 167 piece. Print at 100%…
Original art created by us, then we used Hueforge to create this 200x200 piece Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab…
hueforge delorean blueprint
A baby elephant image generated by Midjourney - https://midjourney.com and painted with HueForge software. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sliceworx Onyx Black…
Darth Vader loves watching sunrises (and sunsets). Hates long walks on the beach, however. In the early morning hours, before the galaxy awoke, Vader would venture to a secluded spot on a remote planet, far from the prying eyes of the…
I hope you like it Please put a like it's always a pleasure and follow me Shelf Skadis Hueforge: https://makerworld.com/en/models/453432#profileId-360747 HUEFORGE Cats : . https://makerworld.com/en/models/446601#profileId-353110 .…
Hueforge Optical Illusions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab…
Dragon Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade…
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #13 (1.12mm) swap to…
Can it do the Kessel Run in 12 parsecs? Who knows?! This is a fairly simple print in place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises…
IMPORTANT: This is the 3 slot version. The single slot version is available here . Update 23/02/2024 Added a new box of size W 160mm x H 240mm Update 11/01/2024 Added a new box of size W 200mm x H 200mm Update 22/11/23 Added 2 smaller…
I generated a 4 color STL of the Dragon decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made…
Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #8 (0.66mm) swap to White At layer #14 (1.14mm) swap to Black At layer #19 (1.54mm) swap to rojo At…
By request added another STL. of a Charizard card without the Pikachu logo, it may be a bit darker than the original print (see photo of Hueforge model) For the 90's kid nostalgia, check out my profile for more Hueforge projects ✌ Print…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #15 (1.22mm) swap to rojo At layer #21…
You need for display Your HueForge picture like this https://www.printables.com/cs/@DonMatis Verry fast and easy print I recommend using PETG, due to the flexibility of the joint
If you have no idea what Hueforge is look here You need something like black, then brown, then yellow, then white for this. I used a sort of dark red as the 2nd colour, worked ok. I used bambu studio and an X1C/AMS but you can use…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #12 (1.04mm) swap to Blue At layer #16 (1.36mm) swap to Yellow At layer #24 (2.08mm) swap to Jade White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 156.8x235.2mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm…
Grogu, the adorable and enigmatic Force-sensitive creature, known to many as "The Child" or "Baby Yoda," had a curious habit that both amused and perplexed those around him. Whenever he had the chance, Grogu would eagerly engage in the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Sapphire Blue Transmission Distance: 0.3 PLA PolyTerra Lavender Purple…
A seamless tile that can be used in multiple copies to create something in large scale. The dimensions are a bit odd [196x245], but was trying to create a cover for my laptop. Print at 100% infill with a layer height of 0.08mm with a base…
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!*** Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: JAYO Black Transmission Distance:…
Hueforge Dreaming Cleopatra Illusion You have to options: With AMS or No AMS (pause at height). It doesnt require the following brands. You only need black, white, dark grey and light grey. The frame you can get here . Print at 100%…
To print this model you will either need a multi color printer, or to manually do some color swaps. There are some great tutorials on youtube for manually swapping colors. I printed this on an X1c BambuLabs printer with an AMS. If using…
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #10 (0.88mm) swap to…
A pre-made 3MF for Bambu Studio that has a swatch card and a modifier already set up.
Simple, print-in-place stand for Hueforge prints or other small 2d art.
This model has been carefully designed to look great with 4 colors. This is an easy to print 4 color Filament painting to add to your other Halloween decor. Only filament swaps! No AMS necessary. This does not need an AMS to print, but it…
Print the cartridges at whatever setting you like. The ones pictured were printed at .16mm layer height for improved curves. A Mouse-ear brim in the corners may be necessary to prevent the corners from warping. For the HueForge prints: I…
Darth Vader HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Protopasta Black Transmission Distance: 0.5 PLA Kexcelled Red Transmission Distance: 4.5 PLA Protopasta White…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission…
In Hueforge one important function is the Transmission Distance of your filament.THis test grid will help you determine the TD for each of your filaments. Be sure to use a layer height of 0.08mm and 100% infill. Start with white filament…
Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This model was created with this Wolverine png. I used Elegoo Black PLA, Hatchbox Blue PLA, and…
I generated a 4 color STL of the snake decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made…
Few Different Sizes to Pick From Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with Black At layer #6 (0.56mm) swap to Red At layer #16 (1.36mm) swap to White for the rest
Put a beautifull racoon in your life ! (Because racoon is the best animal xD) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Model size is 220 x 220 (You can reduce or enlarge the size BUT ! Not change the…
_______________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models, future and past , become a member of my Patreon for a…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 186.67x250mm in size You may print at higher layer heights below the Base Thickness of 0.4mm The Max allowed Thickness is 2.16mm and the Actual…
Hello Printables makers, this is my first model . I am a new designer with an ever growing model base. I am now trying to gain a foothold in printables, I would like to offer my models here as well. I hope you like them ! Happy Printing !…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Please post you prints Filaments Used: PLA PolyTerra Charcoal Black PLA+ Esun…
4 color image Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Pitch Black At layer #7 (0.64mm) swap to Red At layer #12 (1.04mm) swap to Pure Yellow At layer #15 (1.28mm) swap…
Optical illusion processed in HueForge. My first HueForge attempt. 200 x 200 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA…
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm with a .2mm nozzle for best results. for .4mm nozzle try a layer height of 0.06mm with a base layer of 0.14mm. Filaments Used: PLA PolyTerra Charcoal Black…
Image of an orchid under the moon. Image was generated in Midjourney and painted in Hueforge The prompt used was: “orchid, high contrast colors, moonlight, cartoon, cel-shaded art style” I am still learning how to measure transmission…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA Sunlu Meta Grey PLA Control3d White Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #18…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black PLA PolyLite Steel Grey PLA BambuLab Basic…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #10 at 0.88mm Red until layer #25 at 2.08mm White for the rest. Background will go away after slicing. Original artist:…
The dark side of the Force has a mysterious and transformative effect. Darth Vader, after the events of Return of the Jedi, experiences a profound change. His physical form gradually withers away, leaving only a skeletal visage encased in…
Print at 100% infill with layer height at .12mm with base layer of .24mm used Black, Cyan, White Sunlu PLA+ Swap instructions Black until layer 8 at 1.08mm Cyan until layer 19 at 2.4mm White for the rest
Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #14 (1.2mm) swap to…
Another HueForge Painting of my Sea series, my favorite so far! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue…
HueForge Iguana created for the Polymaker Green Start Pack of Filaments. Only manual filament swaps required. Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm Filaments used Polymaker Green Starter Pack :…
Print at 100% infill with a layer height of 0.15mm with a base layer of 0.2mm Filaments Used: PETG KVP Black PETG Polymaker PolyLite Dark Blue PETG Polymaker PolyLite Silver PETG Overture White Swap Instructions: Start with Black At layer…
I generated a 3 color STL of the Mandalorian with the amazing HueForge program. I used greyscale but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made…
Hueforge filament painting (5 colors) of a lighthouse. The photo shows an actual print of the model (scaled down to 130x130mm). I like the more cartoon-ish look when printed with matte filaments - you will get smoother transitions with…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 167.86x235mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Orange At layer #18 (1.52mm) swap to Yellow At layer #21 (1.76mm) swap to White for the rest.
Źródło oznaczyło ten model jako treść 18+.
HueForge Parrot created for the Polymaker HueForge Red Starter Pack. Only manual filament swaps required. Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm Filaments used Polymaker Red Starter Pack : Panchroma…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue Gray PLA…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ eSun Black PLA+ Sunlu Blue PLA+ Sunlu Red PLA+ eSun Yellow PLA+ Sunlu White Swap Instructions: Start with Black At layer #7 (0.64mm) swap…
This is a filament painting of an awesome zombie. It was made by using Midjourney. Printed at 154x200 @ 2.mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PrintBed Black PrintBed Grey…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. 100% infill Start with Black At layer #10 (0.88mm) swap to Green At layer #17 (1.28mm) swap to White for the rest. Makerworld:…
I took the classic superman symbol and placed it into hueforge and made a print out of it. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Lava Red Transmission Distance: 1 PLA…
It uses 5 colors so make sure you swap one out during the print if you only have 1 AMS. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ eSun Black PLA+ Sunlu red PLA+ eSun Yellow PLA+…
This is my picture of a tiger that can easily be printed in 5 colors. It requires only 4 color changes. Here is timelapse video: I used Aurapol PLA. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap…
Only filament swaps are needed, no MMU or AMS is required, but AMS makes it a bit easier. To get the intended look use the filament swaps as described. You can change the colors to get the desired look, but I do not recommend adjusting…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue Gray PLA…
Hueforge T-Rex only 2 color Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap…
I remixed the floating frame from OtherDogDesign for my HueForge Filament Paintings. First, I streamlined the frame to its essentials, making the print almost twice as fast and using half the amount of filament. Additionally, various…
Hope you all enjoy! Post your prints! Make sure to not adjust the z height! this will mess with the layers. You can however change the x and y dimensions! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm…
Hueforge 3D painting software Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #8 at 0.72mm Blue until layer #10 at 0.88mm Aqua Blue until layer #19 at 1.6mm White for the…
Joleton EX Pokemon Card, prepared for multicolour 3D printing using HueForge. The included .3mf file can only be opened with Bambu Studio unfortunately. Can be made with filament swaps, details below. Print at 100% infill with a layer…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA ESUN PLA LITE Grey PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #10 (0.88mm)…
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Pro Black PLA PolyLite Steel Grey PLA PolyLite…
The One Ring From of the poster of the original movie remade in HUEFORGE; Added the one ring on it is mate black, red white and gold Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA JAYO…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
Hueforge print of a Zeus stone carving, with a bit of an optical illusion effect. Total height of the STL is 3.5mm. Print at 0.08mm layer height, with 0.16mm base layer height. Filaments Used: Overture Matte Black Sunlu Grey Overture…
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black PLA PolyLite Steel Grey PLA PolyLite Grey PLA PolyLite Pro Cold White Swap Instructions: Start with…
![Technology Themed [seamless tile] - Hueforge](https://media.printables.com/media/prints/522390/images/4225725_854f5b47-2750-48fd-b1ad-49b37f32fcba/photo_2023-07-07_22-53-49.jpg)
![Sugar Skull T-Rex [HueForge]](https://media.printables.com/media/prints/618058/images/4908613_b08f33b0-a724-4804-8f63-a957a0c710e8_c96f4a90-2bbe-4d33-9a52-ee172db3876f/2023-10-18-094313-1.jpg)
