Liczymy pasujące modele…
Hylian shield keychain from the Legend of Zelda! This one involves multiple filament color changes so I have added a gcode file or you can reference the photo.
UDPATE 6/19/23: I added a set of files with the complete backing under other files! These pieces replace the edge pieces and allow for a fully printable shield. (Disclaimer, I haven't test printed these, but I've sliced them all and…
This is a model of the Hylian Shield from The Legend of Zelda: Breath of the Wild made specifically for multi-extruder printers. Please be aware that the colourized version of this model was not designed to be printed in pieces on a…
You will have to glue on the appendages, so the handles and rivets. Superglue works great. Also check out the master sword: https://www.printables.com/model/288922-master-sword-tloz
I have to admit that I never even played Zelda. Thank you @fasteddy546 for the design for this shield. I just wanted to print a toy shield for my son to play with. I scaled it up to mostly fill an Ender 5 Plus bed and added a handle. I'm…
Zelda Hylia shield sub-assembly model, multiple colors: silver, gold, red. Special note: Silk filament is recommended. The models are printed using Creality K1, and all models are modeled by ourselves. Model display video is on Bilibili…
In this project, we're 3d printing Link's Hylian Shield from Zelda. Read the full guide on learn.adafruit.com It’s over 450mm long and features a built-in handle. It prints in just 2 parts. The bottom part is printed upside down so the…
The Master Sword and Hylian Shield are made the fit the hands of Dummy 13. If printing in multiple colors, the shield is set up to be easily painted with the paint bucket tool. The sword has to be painted free-style, I used the triangle…
Scale model of a hylian shield from Legend of Zelda series. Dimensions are 70cm tall x 58cm wide x 5cm outer thickness (recessed section is 4cm thick); dims were approximated based on official artwork, and a screenshot of Link in the…
I painted a sheet of 4mm MDF in blue (I used a small colour tester). The parts are all printed flat, in the desired colours. I used: Silk Silver PLA Silk Gold PLA Red PLA Blue PLA (optional) I assembled all the edge pieces with the…
Hylian Shield Nintendo switch game case. Room for 10 switch games. Holes in both base and lid for 6x3mm magnets. The games are a tight fit to keep them in place during transportation. Photos show the top face of the extruded design…
Stencil for drawing or spray painting Hylian Crest. Note: If using spray paint, don't print in ABS/ASA. I simply imported an SVG of the crest and cut it into a 1mm plate. Then, I did slight modifications in order to join the different…
This is a Hylian shield plus stand model. The shield model was made by Raven Van de Werken. The MMU profile was painted by me. The stand is new and created in Onshape. Link to the file here if you want to edit it yourself:…
This is a file for @mh_498145's Hylian Shield model. Several users asked for a backing to be posted and although one was given this had the edges which is a different colour from the backing. This remix allows the edges and backing to be…
This model is compatible with the lego system.
Zelda Hylian Sheild and Master Sword Controller Holder Fitted with the arms of the legend, this Zelda-themed controller stand is a legendary home for your gamepad! Whether you're running from guardians, attacking divine beasts or…
The shield all Zelda fans love. Thanks
I wanted this as a wall decoration, so I made it! The best way to print the shield is at a 45° angle with the top of the shield facing down. I have added pre-painted files for the Bambu Lab printers with AMS, as well as files that are…
My own design of this iconic shield from Legend of Zelda. See my base stand file here: https://www.printables.com/model/319619-hylian-shield-base and Targ's Sword here: https://www.thingiverse.com/thing:1411578 Print is about 13 hrs at…
First remix so go easy lol but i created a Hylian shield version of 3D-Printy's Lock Box. The shield prints in parts so you won't need a multi filament printer and the Triforce/Z on the topper will just need a filament change. I have…
M4 Threaded inserts are needed Without MMU: Import in PrusaSlicer and split to objects Hide/ unhide the shield parts you like to slice Slice the red, the blue and the yellow parts sperate without any loops or brim and set the Elephant…
A simple low poly model of the shield of Link
For use with 3dMaker_'s Hylian Shield print and mounted to the wall with 2 50 Lbs picture hangers as seen here , but you can find them just about anywhere. This holds all of the weight. The V shape ensures the shield stays upright while…
A replacement for the top cover of a 2DS XL based on the official Nintendo Hylian Shield edition
This is sized to match a child's hand - and the Hylian shield printed at 80%. So you might need to scale it up if you use the 100% shield. I've attached the Fusion file, in case you want to modify it directly. The bottom of the handle is…
The hylian shield from Zelda Breath of the Wild and Tears of the Kingdom. Made last summer, by myself. Second prop I made, will probably revisit is later after other to make a new version.
remix of the backing but the are cut up
Hyaa Hyut Hyaa Show your love for The Legend of Zelda with this Hylian Shield hoodie bead or shoe bead. Slight curve to the front of the shield so recommended that you print it at a angle. Was printed at .16mm layer height. Can go to .20…
The divine light of Hylia will bring you protection and hapiness! This model is a remix of 3D Central's goddess statue where I added a rocky-shaped pedestal and a place for a candle. Dimensions are 95 x 150 mm and 115 mm tall (4 x 6 x…
A replica in dimensions of the Master Sword and Hylian Shield as seen in Ocarina of Time. If the pieces are too tight to fit in the hand, try scaling it down by 2% at a time. Enjoy! Please support me by liking, following, and/or…
Just a little something I whipped up in my spare time. The model includes a .3mf file, and two STLs that can be split into parts for multi-color printing. I have also Included STLs so that each color can be printed separately, the shield…
Llavero del escudo hyliano del zelda para multicolor ams.
I got tired of using an old filament box for my old roommate's mail after she moved. This can be used for mail, napkins, or just as decoration if you only print half. All pieces are simply pressure fit held together - no glue.
Hyrule Hylian Crest Stencil for hoodie/tshirt (or whatever else you want to make).
I used 5x3mm magnets for this. If you need different sized magnet holes let me know. I used 20% infill (for a bit more weight) and 0.05 layer height to get the nice details. When printed flat it doesnt need supports however you'll get the…
There is the option between left handed shield and right handed. The handle works for both. In the games link uses a right handed shield if you want it to be accurate. SETTINGS this model works with any filament, I recommend high infill…
Remixed https://www.thingiverse.com/thing:2762990 into a project I did for my son. This is the logo added as a relief into the base. I user Amolen PLA+ walnut wood and Amolen Glow in the Dark PLA I suggest printing and manually pausing at…
the Hylian Shield Goes great with my Master sword
Phylian Toothbrush Holder. For use with 3M mounting tape. Included a single and double brush holder file. Hole at the bottom allows for charging in the holder. For use with https://www.amazon.com/dp/B09MTRXRNK Material: PLA No Supports
I made my own alignment pins for this shield. You will need 10 of these. Print at 100% infill and brims on so they stay in place. Lay flat on the long side. All 10 took less than 10 minutes to print on my X1Carbon at standard speed. Nice…
I am a big zelda fan and therefore decided to make a fan cover with one of the most iconic shields from the games. I used the existing fan cover of Killbabylon and added the shield to it. This is my very first 3d model so I am happy to…
Stand per organizzare al meglio gli spazzolini Phylian (lo trovate su Amazon), compresa una postazione di ricarica dove poter inserire il connettore in dotazione è una scanalatura a V per appoggiare lo spazzolino per prepararlo all’uso,…
So you're playing Skyward Sword and you have a Wiimote enabled Master Sword already, what are you missing? A Nunchuk compatiable Hylian Shield obviously! There are two sizes Mini & Big. There are two ways of printing and colouring them,…
My kids wanted a shield fit for little heroes equipped with an appropriately small Mastersword . This shield is flat so it requires minimal supports and uses printed dowels to align all parts when gluing it together. The body of the…
Hylian Shield topper for triangular twist lock trick box.
UPDATE (12/18/2017): Re-uploaded for 2 cookie thicknesses; 1/4" and 3/16" Someone asked me to help make some nerdy cookie cutters so I decided to take a crack at it. I saw other attempts at this design on Etsy, but I decided to use a…
This is a minimalistic Table stand for the Hylian shield by ZoltanKi It perfectly fits the shield printed at 200% (print stand at 100% and shield at 200%) Use supports, glue the parts for assembly, make sure to glue the longer side of…
If you want to see how it was made, aswell as it riding, i recommend you check out https://www.youtube.com/@bassteannh
I couldn't find the type of shield I wanted for Halloween on amazon, so I decided to make my own using Tripo AI.
Print the "inlay" parts all at once if you have an AMS. Each part is on the build plate so you can combine materials- I printed some of it from PETG and some from PLA. The pieces only have to adhere enough to get them glued into the…
Just a little something I whipped up in my spare time. The model includes a .3mf file, and two STLs that can be split into parts for multi-color printing. I have also Included STLs so that each color can be printed separately, the shield…
Link's Hylian Hood clasp from Legend of Zelda: Breath of the Wild! This listing is for the digital .STL files for you to download and print at home on your own 3D printer. Model is split for most sized machines (they are approx. 20mm in…
Parts were printed on my X1-Carbon and Elegoo Neptune 4 Pro with 5% infill, 2 walls, and a .2mm layer height. All parts except for the Triforce, Shield Body, and Cartridge Holder will need support material to print.
