Liczymy pasujące modele…
A nice Mini Bic lighter sleeve, that feels very tactile. It has holes to attach paracord and when the lighter is reversed, the sleeve protects the gas lever from accidental discharge. J25 is the official model number of the Mini Bic…
I found the files on Thingiverse and printed them for a friend. It is a working model engine (35% scaled) with parts color-coded... Sort of. It's really cool! This is NOT my original design, it is a make from Thingiverse. I do not know…
Printed the original sleeve and made the rookie mistake of not paying attention/checking measurements. I quickly realized the original was intended for a mini-Bic lighter. I really liked the design, and I rarely use minis, so I remixed…
Tool to help install cam seals to the correct depth for Subaru EJ engines. It's similar to the OEM tool or any of the other professional tools. It stops on the engine head, so you can't put the seal in too deep. It was tested on a 2007…
Designed by: ericthepoolboy Hardware Kit and Build Support by Maker Rx Experience the unique engineering of the Subaru EJ20 with this fully functional, 3D printable scale model. With moving pistons, belt-driven camshafts, and a motorized…
⚡ Limited Edition: Goku (Super Saiyan) - Low Poly Geometric Figure ⚡ Elevate your collection with this unique fusion of modern digital art and iconic anime history. This isn't just a toy; it’s a minimalist masterpiece.
This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps with a 2.5" throat. To see my version with a 4.0 inch throat, see here. Clamps are retained securely in a small recess modeled into…
English: Introduction: This 3D printed container has been specially designed to securely and compactly store a BIC Maxi (J26) lighter and two cigarettes. Ideal for cigarette breaks, it effortlessly fits in your pants or jacket pocket…
This is a Engine holder for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print settings 1 x EngineSupport : Layer:0.15mm Raft:no Support:no Infill:20% Accessories 2 x m4 threaded inserts 2 x m4x10mm SHCS Mounting…
This is a Intake Manifold Spacer remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). There is two Intake manifold spacer on the EJ20 engine ; they are not the same. The second is the mirror of the first. On the…
This is the Turbo Oil Drain Flanges for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ); the turbo is available with this original model ; all turbo STL files are in the ZIP file…
This is Gaskets add-ons for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). The package include : Driver Side Head Gasket Driver Side Valve Cover Gasket Passenger Side Head Gasket Passenger Side Valve Cover Gasket…
A simple model I made in fusion360 of an EJ25 head gasket.
This is a Oil Dipstick for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: 100% Filament: Geeetech PLA Black…
This is a Oil Pickup extension for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print Settings 1 x OilPickup : Layer:0.15mm Raft:yes Support:yes Infill:100% 1 x OilPickupCap : Layer:0.15mm Raft:no Support:yes…
It can be a bit tricky to get the tool lined up, but once you do you should feel it ‘snap’ onto the seal. Gently rock the tool back and forth as you pull and the seal will eventually release. Installation works the same, just in reverse.…
This is a Cooling Manifold for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). Print settings 1 x CoolingManifold : Layer:0.15mm Raft:no Brim:no Support:yes Infill:20% 1 x CoolingManifoldConnector : Layer:0.15mm…
This is a Cam Gear Face remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). The Cam Gear Face is updated with holes for m2 screws. The screws have a maximum length of 2 mm and are glued. More add-ons…
This is a Waterpump Tensioner Bracket remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). I made a remix of this part because the original spring stop is too fragile (the second picture). More add-ons…
Suzuki Jimny Type J2/J2A - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If…
I have a french door style LG refrigerator (specifically model LFXS26973D /01 ), the left hand door has a mechanism that runs the height of the door to keep it closed, the right-hand door, however, only has a small plastic clip at the…
This is a Valve Spring Puck remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). This piece is updated to allow its printing with a 0.4mm nozzle. Print instructions Rafts: No Supports: No Resolution: 0.15mm…
Originally posted on Thingiverse here: https://www.thingiverse.com/thing:2901483 Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file…
Gridifinity Holder for Klein Tools J2000-9NE Side Cutter Linemans Pliers
Saab J29F Tunnan. I have remeshed and inflated the original model by ThibautF(https://www.thingiverse.com/thing:4549480) to make it easier to print at smaller sizes. Print Settings Printer: XYZ Da Vinci jr 1.0 Pro Rafts: No Supports: Yes…
This is a rough footprint of AJ27-TIE charging module for use in designing various cases. I attempted to make it as accurate as I can, to include the holes, but you should double check the layout for yourself. There maybe some differences…
There is a Oil Pan remix for the EJ20 engine. Electric motor used with this remix : https://www.amazon.fr/gp/product/B07HP62M92 The Drive Gear is remixed for this motor. More add-ons…
Fender Pick Up Cold Air Intake for 2002 Subaru Impreza EJ251. ------------------------------------------------------------------------------------------------ Pros: - Cleaner Engine Bay - Theoretically colder air (factory pickup is next…
This model contains the Freecad file for the mast mount and the 3mf Prusa and gcode files to print this model in PETG. The mount fits on a standard mast of the J24 sailboat and has a tight fit for the Sailmon MAX.
!!!!! Depricated !!!!!!!! I've uploaded a superior design . Fender Pick Up Cold Air Intake for 2002 Subaru Impreza EJ251. ------------------------------------------------------------------------------------------------ Pros: - Cleaner…
Made this remake to fit my RJ26 model. There are tvo versions, one "full" and a shorter one as well.
This is a simple BIC J26 Lighter sleeve. As always, my philosophy is to go fully open source so , here is the Full open 'source code' CAD for this sleeve:…
Funnel for pouring oil into EJ20 engine, easy made and fine fit with pipe (on my opinion of course). I'm made it with 1mm nozzle, Petg filament. Supports maybe required, but i print it without supports.
I became frustrated with my PJ2+ because it seemed like it was always turning on when I didn't want it to. The antenna also regularly popped off, and I'd have to hunt it down. I designed a cover to prevent the power knob from being…
I am learning AI to try and stay relevant and maybe bring it to some projects. I got a Seeed Studio Jetson device and running it at MAXN and keeping it busy can cause thermal throttling. After attaching a fan there is not enough clearance…
If you are using access to 3rd row only from right side of the car you can use step on the left side for this box. Store shackles, straps or other items here. Use velcro tape for attaching box into the place.
Subary Impreza WRX STI Engine EJ20, can be used for display or as keychain
Here's a keychain using the EJ25 block stamp design. Can print with PLA, TPU, whatever. Recommend printing on fine 0.12-0.18 on layer height. Otherwise pretty standard settings should be fine. Enjoy!
Here is a wall mount for a Lutron Caseta Pico Remote Control ref. PJ2-3BRL. Can either be screwed on or -preferably- with double sided tape. To be printed upward. The dimensions are perfect, neither to snug nor too lose.
Surface mount box for Hitachi WJ200 Remote Operator OPE-SRMINI. You will need a 90degree network cable to use this design
I had been looking for a while to see if someone had uploaded some type of mount for the Kenwood D700A ham radio. I could never find one, so I decided to draw one up. This is a work in progress, although it worked for me right off the…
pretty snug fit, so the lighter is pretty secure.
Da ich zu meinem GoXlr noch einen Midicontroler unterbringen musste, habe ich in anlehnung einer Vorlage von Thingiverse etwas neues konstruiert. Der Stand wird zweimal gedruckt und die Querverbinder dreimal. Am besten noch etwas…
Layer: 0,2 mm, infill: 30%
this clamp allows you to mount a BJ2010 ball joint arm to the end of a pipe. current model is for a 20 mm pipe (however a FreeCAD file is provided for customization) 2 x 10mm m4 bolts and nuts are required to secure the clamp to a pipe.
Subaru Impreza (2006, NA) exhaust flange blueprint Subaru Impreza 2006 exhaust flange blueprint to CNC cut from steel. How to make? Needs to be cut out of 10mm (3/8 inch) steel.
Antenna holder to store antenna compactly. Sandwiches behind the belt clip. Knob cover to stop unintended power on.
Switch designed for people with limited movement to operate communication equipment, toys and other electronic equipment. [Spanish] Pulsador pensado para ser accionado con la mano, ésta puede estar posada encima.También puede ser…
The Comsoon J22 bluetooth adapter is a unit which allows your phone to connect to bluetooth, and provides a line-out to connect to a stereo or Aux IN in your car radio. In this case, I'm using it in a 1986 Corvette with a Pioneer radio…
Here is my Mounting Solution for the PZRacing Start ST500 Laptimer. It is specifically designed for the Yamaha R6 RJ27 (2017-) , but may fit other Motorcycles with a 36mm Fork Bridge Nut too. I recommend installation with 3M Dual lock…
Here is my Exhaust Cover, Designed for an Akrapovic Full exhaust System for Yamaha R6 RJ27 (2017-) Should fit on Slip-ons too Prevents Dirt and Water getting into your Exhaust System during maintenance / bike cleaning The fitting is not…
🇬🇧 English Description This small mechanical adapter replaces the fragile plastic link between the front slider and the offset linear potentiometer of the Jing Neng J2500 dimmer . It recreates the original “L-shaped” coupling piece that…
This model was designed to be printed in TPU 95A without supports.
Project: CJ2Aviod.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x125.07mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is…
This is a support for Logitech C920 series webcams. It is designed so it can be sticked to the top of an enclosure. Just flip the image 180 degrees or (flip horizontally and vertically) and you're good to go! :) It doesn't need any…
Um eine zusätzliche 2,5er Festplatte intern im MacPro 2019 an einer Promise Pegasus J2i zu befestigen. Die Halterung wird unten anstatt der Kabelhalterung (muß entfernt werden) mit zwei M3x8mm Schrauben befestigt. Als passende Verkabelung…
J2's notes: 1. What would a " multiverse portal " mean in physics There are two main ideas that people mix: Many‑worlds quantum mechanics: All possible outcomes exist in parallel “worlds” that never interact once they decohere, so there’s…
Direct drop-in replacement for the fragile original top cover claws/hooks on the Specna Arms SA J20 airsoft replica. The original plastic claws are a very common failure point — once they break or wear out, the top cover becomes loose and…
Suzuki Jimny Type J2/J2A - Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If…
Wing mount J2 and J6 for Tamiya Top Force Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2um Infill: 10% Filament: Prusament PLA or ABS Black Category: R/C Vehicles
Case for ZK-SJ20 Mppt Buck Boost Case Please note: I have changed screw terminals because I don't like the original ones! So this case may not fit to original screw terminals! Parts needed: 2x Screw terminal (RND 205-130-7.62-02P Data…
the cover for the power knob is modeled as separate bodies so it can be used on an mmu. the gcode for it uses .2mm layers, and all petg settings which will also print ninjaflex which is the what i used on the bottom of the cap to lightly…
WHY? The J22 has either a piece of garden hose or a small sail batten to prevent the spinnaker line from falling in the water. Those are vulnerable to break or wear down after a while. This is a solution where you can simply print a new…
J2 Design Studio's Range Ruler Set for Star Wars Legion miniatures game. A great printable tool set for all gameplay! Super easy to print and for those with color changing 3D printers, this can be easily colored for that perfect fit with…
This package includes all paid add-ons for the SUBARU EJ20 engine. Rather than purchasing the add-ons separately, this package allows you to benefit from a 20% discount on the total purchase price of the paid add-ons. For detailed…
i cut the model at the waist and added a round peg connector to be able to print it in one go. Total height is 10 inches. reccomend a 2 layer raft to ensure everything adheres and doesnt warp!
I modeled this so I could embed magnets in the sleeve and put the remote somewhere convenient on my desk leg. I designed it around 12x3mm magnets but many sizes will fit. My remote was a little shorter than the photo so I included the f3d…
This design is based upon the ‘VALVE ROCKER HOLDER’ tool shown in the factory service manual. Just like the factory tool, this snaps onto the upper support rail and holds the rockers in their normal orientation during disassembly.
4 pieces of M2x10 screws are required. https://twistypuzzles.com/forum/viewtopic.php?f=15&t=36812
Description This arm is the central component of the BJ2010 system . This system goal is to allow you to fix in the desired position and orientation any object compatible with this system. The arm terminations have a simple squared shape…
This is an adjustable mount for a projector, in my case the RCA RPJ280, with an M6 threaded mount. Three M3 screws are used to adjust/tilt the projector in the XY axes and the mount itself can swivel before you tighten it down for the 3rd…
WARNING: Improper use of this tool can result in damage to your engine block. Don't use it if you don't fully understand what you're doing! NOTE: when printing, increase Infill to 25% – all other default settings should be fine. Affix…
Screw in Funnel for Subaru EJ Motors, helps prevents spillage due to factory oil filler neck design. Recommend printing in ASA/ABS for durability, slow down print speeds at the threads to allow for appropriate cooling of the overhangs.…
Introduction This is now updated model for a Jung (J2) adapter for the Bosch Smart Home Rolladensteuerung. Mechanical properties I've invested some time in fixing the mechanical properties: you can press the button on any position and it…
![Clamp Rack for 2.5" Throat Bessey Tradesman Series F Clamps TGJ2.5[xx]](https://media.printables.com/media/prints/936501/images/7157902_f049f508-01fd-4dda-a38e-0011d4178cb1_f748f9c0-55ab-4dab-98fe-fa885813aa96/pxl_20240706_052349242night.jpg)
