Liczymy pasujące modele…
This is a 3D-printed stand designed for cylindrical JBL speakers like the Flip or Charge series. It provides improved stability, clean, modern look. The open-frame design minimizes material use while keeping the speaker securely in place.…
Hoy os dejo una reparación de unos cascos bluetooth JBL TUNE 510BT de mi hija. Para arreglarlos hay que desoldar algunos cables como comento en el video.
Model of the Stone Mask from Jojo's Bizarre Adventure
Simple lid for JBL Wave Buds Easy to remove, you can shake off the lid when it's upside down.
Simple transport case for JBL Tune 500BT headphones. For hinge pin I used a piece of filament. Material: PLA Nosupport Layer high: 0,3 or lower
This case protects the speaker and also allows you to attach a strap with the two holes at each end. You can use the shoulder strap from the Xtreme model with the case for easier portability. Parts you will need: 8x M3 Bolts 8x M3 Button…
A simple lid to keep dust out of the case of JBL Wave 100 TWS.
This is my first minimalist lever wallet I designed. I wanted a wallet that would be small enough for my front pocket, but still have some storage area for cash or other cards. Other Required Materials That I Used: Screws -…
The material should be ABS.
This is a DIY enclosure designed to be used as a 45 disk JBOD to add to a NAS. It is rack mountable and is built from 3d printed and sheet metal parts. For general information on part sourcing and how to assemble things, refer to this…
I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…
screwless enclosure for one or two HDD/SSD single and double version available
UPGRADE JBL Charge 3 battery cover with support for rubber part. Gasket for this cover is here: https://www.printables.com/cs/model/453487-gasket-for-jbl-charge-3-battery-cover-not-for-orig
Hello, this is a project that i am working since my bowden coupler failed, i remembered why i hate bowden setups, actually i hate the couplers. So, i designed a direct drive mount that is compatible with my cooling solution to upgrade my…
Skadis mount for a JBL Charge 5. Does have a 90mm space for the speaker. May fit other speakers. Hooks have a tight fit.
JBL Charge 4 Wall Mount. Mount your speaker in your room, Garage, and also office.
Edited case from DGA to fit JBL Tune 670NC headphones. Case is resized to fit 670NC model and added logo on top. In case is removable cable case from desordenado , cable case is resized and hook is removed. I added padding to prevent from…
A simple and easy to print JBL Flip speaker stand.
Printed parts : charge 5 case band x4; charge 5 case handle x1; charge 5 case side x2. Screws: m3 x10 ;m4 x6. Nuts : m3 x10.
The title says it all! I have made a hanging frame for my old JBL GO2. Ideal for hiking trips and mountain bike rides. I have printed with ABS that shrinks quite a lot. The model is 0.2-0.3 mm larger than the speaker itself. Even like…
A simple under desk mount for the JBL Charge 3. It is intentionally designed in one piece so that the distance and angle of the two brackets is correct right away. You will need supports if you want to print everything in one piece (you…
Should be printed in ABS or ASA as otherwise PLA or PETG will warp in heat. Fits on with some double sided tape
Printing Material: PETG for a more reliable snap latch and its better for outdoor use. Seam: exclude the seam away from the front, looks better. Assembly Its uses a filament hinge that can be pressed in and use Flush wire cutters to cut…
I made this test cube and additional prints for my nozzle testing video:
Just a notebook stand i designed. Made to work with my 15.6" notebook,but should work with others. BOM: 4x silicone feet 4x M3 Screws 4x M3 nuts Print instructions Category: Computer Summary Just a notebook stand i designed. Made to work…
Thanks @Adastorm, very cool idea with the JBL Flip 3 shower holder. I modified it for the JBL Flip 4 and added a cross beam. The print is broken up into 3 parts for easy printing and to eliminate the need for supports. I used DAP Rapid…
New type of stand for very popular JBL Clip 4 BT Speaker. Printer: Mk3S+ Material : Noctuo PetG Orange Layer: 0,25 Time: 2h 35min Support: No
This is a remix of the mixing nozzle by @drho1337 to be compatible with the 14ml J-B Weld Clearweld Epoxy part number 50114. The ‘EZ Mixer' that comes with it is not available to purchase extras for. Optimized for fast printing with a…
You can print the cover with a color change during printing to get a nice look. The cover is designed for my JBL Flip Essential but should fit all JBL Flip speakers. The cover simply snaps into place.
V2 is more efficient for water evacuation.
This headphone stand is heavily inspired by JGR's Headphone stand model, but doesn't use its files as a base for this model. Its been recreated from the ground up. (IMHO) It improves on the original model on a few key features, that I…
This is remix of my previous case. I changed locking from snap lock to latch lock. M3x30 screw and nut is fot the lid and latch mechanism. M3x25 is for lid hinge. Lid hinge should be tapped M3 thread before assembly. ( It is not…
Model uploaded from Thingiverse. I think is great sollution so I am sharing it here.
The JBL Clip 4 is nice, but the hook can suck sometimes and the speaker doesn't sit flat. This little stand helps let the speaker stand in a few positions and it can fit/store over the JBL hook.
Holder to protect the speaker from dust and rolling down. Improved aesthetics without effecting the functionality.
!!! To avoid scratching the frame, it is best to line the center with something soft (old handlebar tape, bicycle inner tube). !!! Maximum pipe width 40mm, height depends on the screws used (you can print) Sample link:…
Small rubber feet for the JBL PartyBox310 Can be printed in TPU to be similar to the original ones. I have printed them in PLA, also works fine.
Standard case without feet for JBL Charge 5 and with side protection and reinforcements. Screws needed for assembly: 6xM4 8xM3 with nuts (use glue to hold nuts in right place) Print options: Print with PLA or PetG with layer height 0.2mm…
I liked the original model by Neybao, but the power port on my buds case was quite a bit lower (almost 5 mm!) than the port on the original model. So, I had to widen that a little to make room for what I gues is a factory change in the…
I was looking for a holder for JBL wireless microphones. These mics are thick, so I had to draw my own mount. The print consists of two parts and they are connected by an M6 screw. I printed the holder from TPU and the other part, in…
A wall mount with hooks
Rugged box with holder for JBL Flip. I have an JBL Flip Essential 2 Bluetooth Speaker. For save transportation i needed an strong case so i merged the rugged box form Whity and the JBL Flip Holder from melvinfec. The case should also work…
A nice holder for your bluetoothspeaker
Rear speaker wall mount for the JBL BAR 1000. Should also fit for similar JBL BAR models. You need for one wall mount assy: 3x M5x16 screw (cylinder head screw, pan head screw,…) 3x M5 washer 3x Insert nut (ruthex) I printed the wall…
I made this holder for my shower. It hold the JBL GO 2 Speaker (Waterproof). The mountening was made with double faced tape. I hope someone can use it or inspire it for further ideas. Print instructions No Support I used PETG.
This model allows you to mount the JBL Charger 3 directly to the wall. It was designed so that the buttons can be operated from the front and the flap on the back is freely accessible. Only the holes on the bottom must be printed by means…
A click-on microphone holder for JBL wireless microphones to be easily carried together with your JBL Partybox 310. No support nor brim needed when printed on a side. made with tinkercad.
Quick and easy feet for JBL Flip 3 If you have one of these speakers, you're probably familiar with their annoying, cylindrical nature. These feet are my solution to their cylindricality. ( Is that a word? ) The feet clip onto the speaker…
This is JBL Tune Beam EarPods mount bracket, just print it in PLA Now you don't have to look out everywhere in your area
Created a mount for my JBL GO to hang on the wall next to my Ipad. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: High Infill: 20% Notes: K Camel PLA 213°C Category: Audio
This 3x1x2 Gridfinity-compatible box is designed to hold up to four JBC C245 or six JBC C210 soldering tips. Each tip rests in a slot with a bit of lengthwise wiggle room—enough to allow for easy insertion and removal without forcing a…
My daughter wanted a Stand for her JBL Charge4. I found this one on thingiverse but is was for a smaller one. I scaled it up a bit to fit hers. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
HSW for JBL CHARGE 5
I tried to make the mount as hidden as possible. I have also included an .stl file to help determine the spacing of the holes. The helper only takes around 2g of filament.
Its a stand for your JBL CHARGE 4, don't need any support to print. Stand for JBL Charge 4. I printed with an Creality K1 MAX with a 0.4 mm nozzle and texture plate. Material: Black Matte PLA with a layer height of 0,20 mm. Printing time:…
I made a stand for my JBL Flip 4 for my skadis pegboard
This is my second project of JBC Soldering Iron Tips Storage Box for 11 tips and 8 tweezers. You can easy attach it to your JBC Soldering Station by M4 screw at the left side. If you want to attach it to right side - just print in mirror.
Those JBL speakers are great for those boxes. They are not “flat”, as in Studio Monitors flat. There's a picture that shows the EQ from my AKG headphones (the left image) to the boxes (the right image). I captured using a Sure Pro mic, so…
Magnetic or Fix Holder for bluetooth speaker: JBL FLIP 5 accessories: neodymium magnets: 15 x 3 mm - 6 Pcs OR 2 Pcs Screw Pattern https://spartanmounts.com/products/jbl-flip-4-speaker-mount
JBL Flip 3 holder. So you can hang the music to your honeycomb wall. You shall use at least 2 of them. I don't own any other JBL devices to try compatibility with others. Inner diameter of hang is 65mm. Enjoy
I developed a simple support to leave my JBL Xtreme suspended on my 15mm shelf, it was useful to reduce the space on the table and leaves the box in a good area to listen to music while I work. Also added the f3d file so you can edit in…
Mostly resumed in Model name :)
This is an holder for the JBL Flip 3. This holder makes it less prone to rolling so it won't fall off your table anymore. There are recessed holes that can accomodate both countersunk screws and also round ones. I have one mounted on my…
I didn't want to use the crappy ABS mount for the original speakers. New speakers were a bit big for the original so I made these. I wanted to preserve the original harness connector to make install easy. Looks and sounds great. Should…
This is a case for JBL Go 2 Whit this case you are able to carry it around just like JBL Clip 3 There is also a extra part which acts like swivel so when you attach something like carabiner it can turn 360 freely If you love my work,…
JBL Flip mount Mounted with 4 screws. The two strips needs to be printed with TPU. Base, left and right side are glued together.
3D Printable case for the CNC Kitchen C245 Heat Set Insert Soldering Iron Tips compatible with, for example, JBC Tools stands (ADS, CTS) and soldering stations such as the YIHUA 982, Quicko T245, KSGER T245 or Sequre T245. Fits the Insert…
This is a remix of the bike mount designed by r/canadaornot. his design was good, but was hard to print cleanly without support. It fits the JBL clip 3 to your handlebars for safe listening while riding your bike. You will need to buy a…
This is to mount a JBL Charge 5 (and possibly other JBLs) to your Multiboard wall. You need to print 2x Brackets & 4x Multiconnect Big Thread Connectors. It uses the Multiconnect system and requires the Big Thread Connector found here:…
This part is designed to replace the RIGHT ear cup fork mount on JBL Tune 7XX series headphones - made for and tested on JBL Tune 770NC but it will fit several other models with similar cup forks. It can be used for the left side as well…
Please comment, rate, and post a make! I ran out of physical space to add more hard drives to my home server. Given that I already had a few parts laying around, I didn't want to spend several hundred dollars on a prebuilt enclosure. So,…
I designed this to fit most bike frames and logo as well as controls are all accessible from the outside. The controls and logo line up with the windows. It is a pretty snug fit but just in case there is a lid for the case. I out two…
I bought a JBL GO3 Bluetooth speaker for my worktable to play music from my laptop while working. Did not want it to be sitting on the tabletop with all my tools, so I designed a bracket that I can use the 3M command tapes and mount to…
Converting my QAV-S JB to Walksnail Avatar, I wasn't able to find a dual antenna mount, so I decided to quickly put one together. I printed the part with 100% infill and 100% part cooling to, so the steep overhang prints properly. Make…
A remix of GWA's well designed bracket to better fit the Pioneer TS-G1620F-2 6.5" speakers. This bracket is used to fit speakers in the rear of a 3-door JB74 Suzuki Jimny. Includes simple TPU gasket model.
JBL GO 3 bracket/holder made for electric scooter mounting
Ochranná mřížka jako doplněk, pro ochranu reproduktoru
I washed my JBL Flip 6 once, it didn't charge for a whole day because the water had entered the USB-C port, I created this simple cap (to be printed in TPU) in such a way as to make it totally waterproof
This is my updated (JBC Logo and some filets) project of JBC Soldering Iron Tips Storage Box for 11 tips and 8 tweezers. You can easy attach it to your JBC Soldering Station by M4 screw at the left side. If you want to attach it to right…
This part is designed to replace the RIGHT swivel joint on JBL Tune 7XX series headphones - made for and tested on JBLTune 770NC but it will fit several other models with similar cup forks. It can be used for the left side as well by…
Einfacher Halter für die JBL Go 4 Box. Kann mithilfe der 4 Bohrungen an etwas angeschraubt werden.
Printed on Elegoo Neptune 3 Plus
Please comment, rate, and post a make! I ran out of physical space to add more hard drives to my home server. Given that I already had a few parts laying around, I didn't want to spend several hundred dollars on a prebuilt enclosure. So,…
You can stick the holder with double-sided adhesive tape
For this model to work you need to have your monitor mounted on a vesa mount arm. Print settings: Bed adhesion: skirt Supports: No Walls: 6 Infill: 20% (Preferably grid) PLA/PETG *.blend file included for edits to the arm length *Two of…
Stojan , držák míče na plážový volejbal
Wall mount for JBL Flip5 Speaker. Very simple and can be printed without supports.
You can simply print this model using PETG (more durable than PLA) and TPU. TPU is very useful to completely absorb vibration from Sonos diffuser. The diffuser is entirely supported by TPU. Maybe is a good idea increase fill density in…
This is a pegboard mount for the JBL Extreme bluetooth speaker. Fits versions 1 through 3 of the JBL Extreme series speakers. using standard 1" spacing for the pegboard holes. Supports recommended for the pegs. Infill: 60% Filament brand:…
JBL Speaker Bracket for side by side Kawasaki Teryx 4
Printed with 99% infill with carbon fiber PLA Corner piece 141gram Straight piece 66gram I Recommend to place the circel with the hole on the buildplate
This model is for the JBL GO 3 - It features a 30mm belt loop to go hands free. I printed mine using 0.35 layer height and 20% infill but you will probably get a better surface finish with the .20 layer height.
This phone mount for the Suzuki Jimny JB74 is part of my ModMount (Modular Mount) system. This system comprises mounts, connectors and device holders. The mount is designed to fit using one of the existing fixture holes along the dash…
JBL Flip 4 holder I needed a secure way of mounting a flip 4 into my boat. This design keeps some of the buttons within reach without the need of taking it out of the holder. The speaker clicks into place. Printing instructions Print with…
Simple and effective protective case for the OG JBL Go. I can't believe this speaker still works even, so figured I might as well protect it. Has carabiner\lanyard hole for hanging on backpack etc. uses 4 M3 screws.
This model is designed to mount your JBL Flip 6 onto a Skadis board. It consists of two separate components and requires a total of 13 grams of filament to print. Follow your slicer’s recommendations for optimal print orientation and…
This is a plastic insert for a GE gas oven burner control knob. The GE model I have is JGS750SEF5SS and one of the knobs was spinning freely since the little plastic insert had worn out. This replaces that insert and allows the knob to…
