Liczymy pasujące modele…
I designed Joystick Toy in Fusion360 and prototyped it through several stages before landing on this design. I only recommend printing this assembly in PLA or a material that maintains dimensional accuracy after printing. It prints well…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
I designed this to be like Tomo's fidget joystick but it allows for more range of motion. Its pretty fun but they keep breaking on me eventually. If anyone manages to print one of these in a way where it survives please let me know! I've…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
i couldn't find a case for the KMTech Amiga auto mouse and joystick switcher, so i had a go at making my own. this is a fairly basic case that has a pair of light pipes in the lid for the leds that indicate which port is active. there are…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Check out the Alpakka controller, its a really nice project, and it works like charm, since I built mine, this is the only controller I am using for PC gaming. I made the joystick cap out of TPU and gave it a fuzzy skin in the slicer…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
A "wall mount" or "under table" Holder for Joystick port Extender cable. For the D-sub 9 gaming ports om an 80's computer. Joystick extender found on different web shops, like Ebay or amigakit.amiga.store Category: Computer
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
Adeept Joystick Module Case This custom 3D-printed case is designed for the Adeept joystick module, providing protection while maintaining full functionality. It securely houses the module, preventing damage while allowing easy access to…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple and easy to print fidget toy uses a print in place ball joint I designed in fusion 360 once printed, force the toggle to the side to release the inner support. Print at .2 layer height and use z hop and at least 3 walls/perimeters
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
Joystick with mechanical trim feature that you can use with remote control circuits. Filament: PLA (Can be printed with Normal/Standard slicer settings.) My Youtube Channel: https://www.youtube.com/@Kendin-Yap
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
I needed a simple and lightweight front cover to protect the joysticks and the screen when traveling light, so I made one. Two versions: partial cover and full front cover: Prints as a single piece in the P1P and X1C (and any larger…
ErgonoMouse is a do-it-yourself 6DOF Controller (6 Degrees Of Freedom) based on Arduino. Or commonly known as "space mouse". It uses commonly available hardware (see “Required Hardware” 🡣) and it requires intermediate printing,…
Credit to my son for the name; it's fun to say. EDITS: See bottom for details A long time ago I got excited and found that gimbal design by ulokelo and asked my neighbor to print it. He did, then I learned it had no Z axis and I got sad,…
Don't forget to like and comment. Right-handed joystick grip that looks cool and feels like it's the real deal. Voilà! 12 buttons: 1 trigger, 1 pinkie switch 2x 5-way hat switches This joystick grip is inspired by the Knüppelgriff (stick…
Simple to print fidget toy, print both halves, install the tactile button, and snap the two halves together. Use a 6x6mm tactile button like this: https://amzn.to/46L9ypf Snip off the legs or bend them back and forth a bunch of time to…
Use this to rough-in your Tinkercad or Fusion 360 (or any CAD) designs that include this joystick. The measurements are accurate for the stick I used in MY design, yours may not measure exactly the same as mine due to differences in…
I wanted to create a print in place fidget that was an easy print. I came up with this design. I printed these on my Prusa XL with a 0.6mm nozzle at 0.15mm layer height in PETG (base) and PLA (joystick) and on my Bambu Lab X1-Carbon with…
لقد طورت حامل جهاز التحكم لجهاز البلايستيشن حيث جعلته اسهل في الاستخدام و اوفر في الفلمنت و يستخدم بواسطلة شريط لازق ذو وجهين I have upgraded the joystick holder to be easier to hold the joystick by using the double face or scraws. if you…
easy to print toy for kids and stress reliever. Easy assembly. No supports needed. But are recommended. Printed from PLA+ Layer height 0.2 mm Printing time about 10 hours. You need 4 springs made of a ballpoint pen and some filament as a…
Joystick guards for traveling without a case. Use 6x2mm magnets and snap in gently. If they are lose, can be glued (not my case at least). No supports needed. Bolts are not needed since it has a hinge printed in place
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
(print in TPU!) As the Joysticks of my trusty (wired) Xbox 360 controller are all worked up over the years I decided to make my own little caps to improve on grip again; fortunately fits PS4 controllers as well (DualShock4 v2) and might…
Reemplazo para el joystick del mando de xbox one. se me rompió la goma del original y hice este nuevo.///Replacement for Xbox One Controller Joystick. I broke the rubber of the original and I made this new one. Print instructions…
I feel that this is a major step up for the open source Space Mouse. The current potentiometer joysticks used have two main issues: They work by wiping a metal contact on a carbon track - the carbon track will eventually wear out. There…
I need a joystick, but the ones I find are not like mine. I have designed one like the one I have for my designs.
A set of faceplates, a digital cross, a joystick, and a pad for the popular SeedSigner ( https://seedsigner.com/ ) Open Pill case. Print the faceplates with the face down on the print bed. The pins match the bores of the WaveShare 1.3"…
This is a keyboard joystick that I made to work on a numpad. It works pretty good and prints with no supports. You will need to put blu-tack or sticky pads onto the bottom of the smaller legs for it to work. Post-Printing For the small…
modelos facil de hacer
This is my original take on the Joy Fidget by TomoDesigns. I wanted to print one but then realized I could elevate the experience by adding a really satisfying clicker underneath. "Where do I get a clicker though?" you may ask. Look no…
These are based on upperpeninsulaplastics's Ultimate Retropie Joystick Controller . Thanks for providing a .step file! These are the changes to my design: Tabbed holes that work for snap-in buttons All other buttons to front Moved…
Having ball bearings running in metal sleeves results in a smooth action and a more compact SpaceMouse. Hall effect joysticks eliminate dead zones and enable much finer control. The only issue you need to be aware of is manufacturing…
These are replacement joysticks for xbox 360 controllers. The design is suited for 3D printers and not identical to the original. I have experimented with a few different designs trying to find the more grippy design that is easily…
I wanted a joystick i could use with games like farming simulator or flight simulator, but i didn't want to buy one since i am planning to incorporate it into a farm sim side panel. And i find it fun making my own stuff. Printing: The…
A simple low-profile Guard/Lock for your Mavic 2 Controller. A much needed accessory since I already scratched my display, still can't find what scratched it. Only my Mavic was next to it... Well, not a problem anymore! You can add some…
This figit-toy is my first attempt at any kind of print in place mechanism, I really like how it moves and makes for a very fun toy. It is nice and small so will not need very much filament to print, could be a great gift if you just need…
DJI RC Motion 3 Thumbstick / Joystick replacement because DJI seem to refuse to replace such a simple part. Installation: A simple press fit with a small dab of superglue just before you press the thumbstick in, just as the factory…
A simple PS4 joystick keychain
Remix of - https://www.thingiverse.com/thing:4695125 I made the concave wall in the center of the joystick a bit thicker/deeper. And rounded out the top of the joystick, where the original was more flat. Works well when…
Grip for flight simulation 0.16 layer height is recommended All the components are avaiable on : https://polysim.fr How to assemble : https://www.youtube.com/watch?v=2aSrMxbHL8U&ab_channel=Polysim
i couldnt find one thats good so i just mixed two models. psp analog-stick/joy-stick or whatever you call it replica, almost like the original, so if u want a replica download this print it vertically for the best texture use a 0.2mm…
Print using supports at about 60° also a brim on the inner and outer. I printed mine out a PETG with 3 parameters and 25% infill. I added an infill modifier for the bottom to the bottom of the palm plate to make it solid. Mark off the…
The ClickShift is an experimental new fidget design, combining a ball-joint joystick and ball detent mechanism to make a joystick that snaps into multiple positions. The result is a “clicky” joystick that produces a fun tactile (and…
FR Les manettes de la télécommande RC2 de DJI sont faciles à perdre. Vous pourrez les remplacer facilement avec ce modèle. Vissez complètement une vis M2 x 12 dans le modèle et mettez une goutte de frein filet Loctite avant de visser…
An aternative to the existing Lenovo Legion Go Joystick Protectors
Simple to print joystick fidget toy using magnets, print the 3 parts, install the magnets, and snap the parts together. Printing This model is small and requires to be printed accurately to work as expected. Material: PLA, PETG Layer…
I wanted to create a print-in-place protector similar to what I've seen out there for the Steam Deck. This has very tight tolerances. Print topside down with supports for the center bit. Once completed, remove the supports then with a…
Good old joysticks for old computers can be expensive so I decided to make my own for my Amiga. Well. Maybe it's not the best working joystick, but I had a lot of fun designing it. I hope you will like it.
This is a bat top replacement for the Arcade1up joystick with ball tops. Bat tops have a much better feel to me so I quickly made this to replace the ball top on my machine. Have installed these on three different machines without issue.…
UPDATE NOV 17 2024: Apparently Seeed makes a whole bunch of XIAO boards now. When I made this project, there were only two options. Unfortunately if you buy certain ones, they won't be compatible . I recommend the SAMD21 or RP2040…
This part is designed to hold the hall effect sensor in a Thrustmaster Warthog joystick when used with the ball bearing gimbal v2.0 by Psyrg https://www.thingiverse.com/thing:4550666 Please calibrate after installation using Thrustmasters…
Remix of the Olukelo gimbal that has threaded arm with mounting space for a 6pin din connector like this: https://eu.mouser.com/ProductDetail/Kycon/KMDPLX-8S-100?qs=56XnaFOCjrofk105TmWYHg%3D%3D gimbal carier and frame have mounting holes…
Extended Joystick for ps5 or ps4 control 0,12 layers and 5 walls 100% infill
Remixed the popular offset extensions for Virpil/Thrustmaster to add more lengths and distance
Octagonal Restrictor Gate for Hori Hayabusa joystick (used in the Hori RAP4 for example) designed as a drop-in replacement for the stock square gate. Important: I modelled the pins of the original gate but actually didn't print them to…
Works well as a reference or for smaller prints, higher detail version for larger prints is currently in progress. Not super accurate since I had to guess the proportions.
Large top joystick is 20mm diameter and the small is 14mm, the small 22mm stick is 12mm you can use fuzzy skin in the slicer for extra grip print upside down.
It is so easy to find this shaft broken in the joystick pad of the mercedes E class and C class. You can print this one and save yourself $200.
A new version of the joystick for playing your beloved games. You can make it as a USB joystick (Arduino Pro Micro required), or as a version for Amiga computers. I made a little more effort this time and this version of the joystick…
small fast print to keep joycon joysticks don't rest on their side causing drift.
Model of a generic, 3rd-party Switch Joy-Con joystick. Dimensions are best effort, so I recommend verifying everything.
This is a basic 4 way hat switch intended to be used with custom controllers, while working around the limitations of small scale prints on FDM printers. I've printed all of mine in PETG but there's no reason PLA or ABS shouldn't work. 4x…
Scarfring neckerchief for Scouts with game pad design. Pasapañuelo con joystick
remix of Joystick Savers V2 by Scout339 to fit the Lenovo Legion Go.
made for 30mm buttons designed with fusion 360 measures: 240mm x 170mm, h 60mm uploaded with and without decals, mine have custom decals printed without supports, maybe the curved part may be better with supports, i haven't tested yet…
A replacement joystick for Quest 2 controllers! I made this after my joystick inexplicably shattered, and it works as well as the original stick! The only feature that does not work is the touch sensor, which i'm not exactly sure how it…
Joystick cap used as part of an xbox controller.
I was building my own version of James Bruton's animatronic face robot: https://github.com/XRobots/ServoSmoothing , but needed an enclosure to house the Uno and twin joysticks. I remixed his OpenDogV3 remore controller to suit. I used…
Just a simple joystick fidget. Prints in place, no AMS, no supports needed. Free to sell physical prints of this.
I needed a rough model of the Arduino joystick modula for a project, so i made one. Includes all relevent information to model around
Replacement/Upgrade for the PSP's thumbstick. Printing in resin or MJF is desirable. If printing with FDM, use TPU and add some texture with the slicer and place the oval part on the buildplate adding a raft. Idk if supports will be…
A remodel of my previous joystick , have not actually printed this yet to test fitment.
If you are a fan of Akedo than this is for you this joystick has the attachment to make the newer controllers like the old ones check image for explanation.
Washer and tube for a Sanwa arcade joystick, similar to the JLF-CD combo. The normal version reaches 3.5 cm height and should fit a standard JLF-TP-8Y, but I have also included a 5 cm version just in case you are using a 1.5 cm extender.…
This Universal HOTAS/JOYSTICK CHAIR MOUNT w/ Optional Cup Holders has holes to mount a Virpil Mongoose CM3, VKB Gladiator EVO, Thrustmaster T.16000m Joystick/Throttle, Turtle Beach Flight Deck Joystick/Throttle and more. You can always…
Mechanical, threaded adapter to attach Thrustmaster grips to Winwing Orion2 base. Can be used with FS Projects Airbus sidestick grip. Wiring needs to be modified to change from 6 pin mini DIN to 5 pin mini DIN. Picture of wiring (found on…
What this project is all about Competition Pro joysticks from the eightys are known to be great and durable devices. Compared to their competitors they were great! However, they were by far not as good, as they could have been! The…
A mount for the Logitech Extreme 3D Pro Joystick (https://www.logitechg.com/en-us/products/space/extreme-3d-pro-joystick.963290-0403.html ).
Modeled this in 2 pieces, so it can be printed in 2 colors and the button can be pressed into the model. This can be printed without supports Print instructions Unassociated tags: video game Category: Props
A simple two-part fidget joystick that easily slots together with a touch of glue. Print the spring, at least, with gyroid infill for maximum strength.
A cover for the DJI Mavic Mini joysticks so they can stay on the controller while it's in the Fly More case. I saw 2 other designs, but they seemed like they could let the sticks slide/wiggle around in the case, I designed a cover that…
This ring holder captures the essence of nostalgia, making it a must-have for any gaming enthusiast. But this ring holder doesn't stop at aesthetics alone. Inside the joystick replica, you'll discover a cleverly concealed storage…
Press Like for encouragement. Comment for improvement. Adaptor Virpil/Thrustmaster base to VKB NXT grip and vice versa. It hasn't been tested since I do not own a VKB. Thanks to crash1983 for the VKB interface! Note: 3D-printed plastic…
Platform for flight simulation 0.16 layer height is recommended ll the components are avaiable on : https://polysim.fr How to assemble : https://www.youtube.com/watch?v=ZJVehHBs4Xg&ab_channel=Polysim
This model should be printed in tpu (esun e95 etpu in my case), make sure to put the flat side of the joystick (at the top) against the buildplate to print it without supports.
small part that should reduce the risk of damaging joystick when traveling. Compatible with xbox one/series controllers
Výška vrstvy 0,2 mm, infill 15%. Funguje skvěle s kuličkou Nového koření. :-) Layer height 0.2 mm, infill 15%. Works great with a ball of allspice. :-)
I made this joystick cap for my ZD-V108 controller. I don’t know whether it is suitable for other controllers, but you can try. Printed in PLA, 15% infill with support
Fully printed clip-on adapter for the modular XBox Adaptive Controller joysticks made by Egon . No disassembly required! Please provide feedback if you have any. Assembly/Disassembly Be careful to not put too much strain on the arm…
This is a homage to my favorite stick from my misspent youth, the venerable Tac-2 by SunCom. The guts are off the shelf arcade parts. The only part that can be tricky to source is a joystick extension cable for Commodore/Atari computers.…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more stability, add 5 first layers, 4 perimeters and infill 30% Put “Hilbert Curve” No support is needed Materials recommended : PLA or…
Para colgar tu mando debes imprimir dos de estos soportes y colocar uno de ellos en cada palanca o joystick de tu mando, lo interesante del modelo es que puedes usarlo tanto con mandos de PlayStation como con mandos de Xbox o de…
The Joystick Fidget is a compact, 3D-printed gadget designed for stress relief and endless entertainment. Perfect for restless hands, this sleek fidget tool features a joystick-style mechanism that mimics the feel of a classic gaming…
This is the splitbox, a fighting game controller designed with ergonomics and portability in mind! ERGONOMICS The angles of the top pieces and the buttons are intended to let you keep your hands, wrists, and arms in safer positions and…
PS5 JoyStick Cap – Flexible Replacement This is a simple replacement rubber cap for the analog stick of a PlayStation 5 (DualSense) controller. Perfect if your original rubber is worn out or missing. Designed for flexible filament (e.g.…
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
Springy joystick fidget toy. Joystick does not return to center, but is fun to push in while playing with. Hardware: 2 strong disc magnets 2mm thick and 8mm in diameter. Print settings: .12 mm layer height Supports recommended. Before…
![ErgonoMouse [Free version] - 6DOF Controller Knob & Joystick with Wheel, Buttons & Keys](https://media.printables.com/media/prints/973725/images/7443301_6431622c-6203-4049-abb5-c021b4241c1f_e177f1da-39c9-4328-8e49-8818ce495155/promo-knob-free.png)
![Arduino KY-023 Joystick Module [MOCKUP]](https://media.printables.com/media/prints/498437/images/4055346_2a20c205-6a4b-4ced-96d0-ed921285f9c6/ky-023-joystick-module.png)
