Liczymy pasujące modele…
Modeled in Fusion 360. Based on Tiger 131 at the Bovington Tank Museum. 2 versions of the tank are provided, one with the feifel air filter system attached, and one without them. The Tiger I was a German heavy tank of World War II that…
Chceck also other models https://www.printables.com/@Jerryie/collections/2044634 . Easy to assemble. -Two colors -organic support -0.15 layer height
Version 2 of my Panzer VI Tiger 1 design. I know it's really popular, so I decided to remake it. It has even more details, and is better proportioned. I remade the treads and the wheels. It's scaled 1:42 this time. The turret rotates and…
can be printed together the model needs to be glued together or separately in other colours the VI Tiger tank is very realistic Print in place kit card , Assembly required need to use a support the cabin can be rotated 360 degrees
Tiny Tank – Tiger i 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and the theback part to the main body. To scale a model from 1:200 to 1:144, you need to use a scaling factor of…
I noticed my model of the Tiger 1 I uploaded was the Tiger 1 H, not the Tiger 1 E, so I made the Tiger 1 E. This version has treads on the turret, and a new cupola. Some other small changes were made. The Tiger I was a German heavy tank…
Easy to assemble. -Two colors -organic support -0.15 layer height
Tiny Tank – Panzerkampfwagen IV 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. Comes in three versions: Ausf. F Ausf. G Ausf. J o scale a model…
Tiny Tank – Panzerkampfwagen V Panther 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. Comes in three versions: Ausf. A Ausf. G JagdPanther To scale…
I decided to re-do my design of the Tiger 1 E, this time to an Early variant. I re-did the road wheels and added tracks on the front. The classic cupola is added, along with the feifel filters and the smoke launchers. Small changes…
I printed it with my Anycubic Kobra GO with black PLA. Next month I will upload a version of the leopard2a7 with less details. There are two versions. The version “leopard2a7cut” is diveded into two pieces so that you can print it larger…
Geetech PLA Matte Grau Bambu Lab X1C Mit Supports
Geetech PLA Matte Grau BambuLab X1C Mit Supports
I created a two fictional or alternative types of models of Panzerjäger Tiger (P) Ferdinand (Sd.Kfz.184) mit Krupp Maus II Turm mit 150 mm Kampfwagenkanone KwK 44 L38 in size - scale 1:100 for model makers to the dioramats or like a model…
This is part of our Kolossale Kampfpanzer project! Subscribe to our Patreon or Tribe for better value. There is also a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers!…
I did not provide STLs because I adjusted the tolerances on the original to work with my Bambu printers. I parameterized the needle and bearing dimensions in Fusion so you can tweak them to your machine tolerances and then export the…
The fusion file is provided would you want to adjust the tolerances, see how it's done or simply edit the model easily. Printing Information: All parts can print regularly except the german cross which requires a filament swap (it is too…
My model of an Rheinmetall KF 51. Printed in black PLA Note: Scale 100%
This seems so simple. (1) Thats because it is simplified (2) Because this was tourcher to make, its harder to make than it seems. This was I project I started after I saw a Maus here on printables, so I said "I want to try it myself, how…
This is our Kolossale Kampfpanzer project, subscribe to our Patreon or Tribe for better value! There is a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers! patreon.com/dakkadakkastore…
Deutsch: Eine einfache aber effektive Karten-Box, um das Hauptspiel "Kampf gegen das Spießertum" (Engl. Cards Against Humanity) sowie mindestens 4 Erweiterungen (und mehr, ich denke 6 Erweiterungen passen auch :) ) an einer Stelle zu…
inspiré de ce model sur Thingiverse, Panther auf A, auf D & auf G -1/50ème, de Alainkif
this is the complete version of the sniper
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 5-10 minutes! Please note the settings in the…
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10-15 minutes! Please note the settings in the…
KI generierter Minotaurus mit Kampfaxt. Diese Figur ist eine KI Adaption eines Bildes aus Pinterest. Ausgedruckt habe ich ihn im Massstab 1:24 (78mm) auf einer Elegoo Saturn 3 mit 3D Jake Tabletop Resin. KI Unterstützung zur Erstellung…
This is to make cookies in a shape of the Panzerkampfwagen VI Tiger. You cut it with the main-cutter and after that you stamp it with the contour details. And then you bake it. Panzer Hurra! Print Settings Printer Brand: Prusa Printer:…
A simple German remix for the “Attack Cat” warning signs . I took the cat mesh from “Hunting cat” and redesigned the rest. Fills an MK3 sheet almost completely. If scaling down, reduce XY only (leave Z unchanged for the correct effect).…
the complete version of the sniper
Dieses Modell ist 100 mm hoch und ist ideal für Resin Druck
Dieses Modell ist 100 mm hoch und ist ideal für Resin Druck
Der Eurocopter Tiger Kampfhubschrauber als „2,5“ D Modell, die Basis ist 3mm dick. Der Standfuß ist aus Holz gefertigt, es wurden 3mm breite und 15mm tiefe Nuten hinein gesägt. Die Breite und Tiefe des Fußes kann natürlich beliebig…
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10-15 minutes! Please note the settings in the…
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10 minutes! Please note the settings in the…
I created the hinge Laura Kampf did in one of her Videos. You can find it here: Please show your love and give her a Thumbs up, and Subscribe to her channel I love the Design, and im sure i want to use it in the Future
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10-15 minutes! Please note the settings in the…
Hello everyone, I have vectorised a technical drawing of the Leopard 2 tank and made it printable with a 0.4 nozzle. IMPORTANT: The illustration is very detailed, so slicing can take up to 10-15 minutes! Please note the settings in the…
German super-heavy tank
Kampfflugzeug mit Stützen zum aufstellen
Der Spielkarton war so eng, dass die Karten leider nicht richtig reinpassten, nachdem man sie ausgepackt hatte. Daher hab ich ein Spieleinsatz konstruiert, mit dem die Karten perfekt in den Karton passen. Auf dem einen Bild ist die…
Print Instructions: Printed with both PLA & PETG Printed at 200C w/ PLA Printed at 230C w/ PETG Settings: 0.2 mm layer height 0.4 mm line width Supports enabled - Used tree supports Infill: Doesn’t matter; The model is too thin for any…
Gedruckt aus PETG mit Bohrungen für Messinggewindebuchsen. Passend für den Netzpfosten von Schäper Wettkampfpfosten DVV I. Profil 120x100mm. Wandungsstärke 4 auf 6mm.
A insert to hold the cards and tokens for “Harry Potter - Kampf gegen die dunklen Mächte” by Ravensburger Games. Fits the original box (german release). Einsatz für die Karten und Tokens vom Ravensburger Spiel “Harry Potter - Kampf gegen…
Teil Material Füllung Schichthöhe Stützen Rand K-Halbkreisel 1, 2 PETG 100% 0.28mm nein nein KK-Hammer PETG 100% 0.28mm nein nein KK-Mutter 102 PLA 25% 0.28mm ja nein KK-Halter PLA 25% 0.28mm ja nein KK-Zahnstange PETG 100% 0.28mm ja nein
Das ist ein in Blender designter Kampfjet. Er ist druckbar, allerdings nur mit sehr vielen Stützen.
Chceck also other models https://www.printables.com/@Jerryie/collections/2044634 . Easy to assemble. -Two colors -organic support -0.15 layer height
Tiny Tank – Tiger i 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and the theback part to the main body. To scale a model from 1:200 to 1:144, you need to use a scaling factor of…
Print Instructions: Printed with both PLA & PETG Printed at 200C w/ PLA Printed at 230C w/ PETG Settings: 0.2 mm layer height 0.4 mm line width Supports enabled - Used tree supports Infill: Doesn’t matter; The model is too thin for any…
KI generierter Minotaurus mit Kampfaxt. Diese Figur ist eine KI Adaption eines Bildes aus Pinterest. Ausgedruckt habe ich ihn im Massstab 1:24 (78mm) auf einer Elegoo Saturn 3 mit 3D Jake Tabletop Resin. KI Unterstützung zur Erstellung…
Dieses Modell ist 100 mm hoch und ist ideal für Resin Druck
Dieses Modell ist 100 mm hoch und ist ideal für Resin Druck
I printed it with my Anycubic Kobra GO with black PLA. Next month I will upload a version of the leopard2a7 with less details. There are two versions. The version “leopard2a7cut” is diveded into two pieces so that you can print it larger…
Just a normal battle axe for you. You can do everything you want eith this moddel.
