P
PrintablesPcManny
Walther GSP Korn
Walther GSP Front sight with aiming aid. Walther GSP Korn mit Zielhilfe.
- Pobrania
- 260
- Polubienia
- 9
- Ocena
- 0
Wyniki wyszukiwania: korn
Liczymy pasujące modele…
P
PrintablesLars R.
KoRn Logo Wallart
KoRn Logo as Wallart in a ≈40cm x 30cm
- Pobrania
- 244
- Polubienia
- 19
- Ocena
- 5
P
PrintablesstandaloneSA
Ekornes Stressless friction mating
Old-style Ekornes chairs had plastic friction matings on each side that allowed the chair to recline smoothly. The parts would break, though. This part replaces each half of the pair that were mated behind the knob. Make sure to sand the…
- Pobrania
- 237
- Polubienia
- 11
- Ocena
- 5
P
Printablesdiego hijano
Korn Pick
This is a korn pick for hanging <3 I try to print in two colors and looks so awesome :D
- Pobrania
- 189
- Polubienia
- 21
- Ocena
- 5
P
Printables3D SPARE
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter
Roller blinds curtain attachment for normal curtain rail, adaptor bracket for curtain rail, curtain track holder for zebra blinds, kornise stor perde takma aparati, rollo vorhangschienen adapter …easy to print and fits perfectly
- Pobrania
- 181
- Polubienia
- 7
- Ocena
- 0
P
Printableshwmonkey
Ekornes Stressless recliner tension replacement pads
My Ekornes Stressless recliners were not holding in place well any longer. The issue was that the “pads” were worn out. Printer to the rescue. I designed these pads to bring new life to my recliners and I am so glad they worked! I printed…
- Pobrania
- 137
- Polubienia
- 8
- Ocena
- 5
P
PrintablesTraunwolf
Ringkorn M18 Luftgewehr / front sight ring M18 airrifle
Ringkorne von 3,8-4,2 mm, 0,5 mm hoch, am Besten zu drucken in 0,1 mm Schichtstärke. Passen in die gängigen M18 Korntunnel bspw. von Walther oder Anschütz.
- Pobrania
- 112
- Polubienia
- 5
- Ocena
- 0
P
PrintablesKIL0
Korn Pitchblack Pro Rack Mount
I created this replacement part for the rack mount of my Korg Pitchblack Pro. The replacement is more rugged than the original so the tightening of the rack screws won't break it. Fit is quite tight but snaps in place like the original.
- Pobrania
- 106
- Polubienia
- 2
- Ocena
- 5
P
PrintablesTanner3D
Kornak the Corrupted, 6 POA Fantasy Figure
Kornak was once a brave heroic warrior who fought for the good of the realm, until the day his party of adventurers sought to destroy a greedy dragon who had been pillaging villages of their valuables. The adventurers found the dragon…
- Pobrania
- 84
- Polubienia
- 39
- Ocena
- 0
P
PrintablesAzulyo
Korn Keychain (1 layer)
Korn Keychain (1 Layer) This remix was modified to offer a single layer model , making it ideal for printing on single-color printers . Simple and fast to print.
- Pobrania
- 70
- Polubienia
- 11
- Ocena
- 0
P
PrintablesChris Hill
Ekornes Stressless Furniture Parts
This is a small collection of parts that I made to replace missing and damaged parts on my Ekornes Stressless suite. The plastic insert for the wooden sofa legs. This lifts the wooden legs off the surface by 3mm. Probably not needed for…
- Pobrania
- 65
- Polubienia
- 4
- Ocena
- 0
P
Printablesjamie456
Pokornyi Engineering Dash Pro Fanatec mount
This is a mount I made to to fit the Pokornyi Dash Pro to my Fanatic CSL 2.5
- Pobrania
- 64
- Polubienia
- 7
- Ocena
- 0
P
PrintablesstandaloneSA
Ekornes Stressless Recliner tension dial
This is a replacement handle for adjusting the tension on a vintage Ekornes Stressless recliner. This works with the friction fitting here: https://www.prusaprinters.org/prints/82858-ekornes-stressless-friction-mating Insert a 3/8" hex…
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRambler990
Pokornyi Engineering F499 6 Paddle Mod
A set of modded shifters and drill guides to allow the installation of 2 additional paddles to the PE F499 wheel
- Pobrania
- 37
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFotoschuetze
Steyr air pistol front sight / Luftpistole LP (EVO) 5 / 10 / 50 Korn
Korn für Steyr LP Auf meiner alten LP 5 hatte ich noch ein sehr schmales Korn. Bevor ich ein neues kaufe, wollte ich erst testen, welche Breite ich brauche. Daher habe ich mir die Körner konstruiert. Die Körner sind in verschiedenen…
- Pobrania
- 37
- Polubienia
- 0
- Ocena
- 0
P
Printablesmalexmave
Skadis Spice Rack - Ostmann / Hartkorn / Fuchs
Mount your spices to a Skadis pegboard in the Kitchen. This includes two designs, one for smaller diameter spices (Ostmann and Hartkorn fit well), and one for larger-diameter (most versions of Fuchs work). The small spice racks are…
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
PrintablesEnver BAYRAM
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJerry Lee
KornerClock - wall clock for the corner of the room
This is an unconventional wall clock for the corner of the room or desk. Update: 8/22/2024 - Added a minute hand that is capped off in the center for those who wish to complete this model without the second hand. The clock body can be…
- Pobrania
- 31
- Polubienia
- 10
- Ocena
- 0
P
PrintablesGioforay
Ekornes Sliding Ottoman Locking Pin
I modeled & printed this Ekornes Sliding Ottoman Locking Pin to replace a lost piece on my in-laws footstool
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRuudimental
Sodastream CO2 bottle saddle for Korny Beer Kegs
Attach the sodastream gas bottle to the korny keg to make it more portable and easier to use. Fits straps up to 50mm wide. Take care to avoid damage to the regulator during transport or use. Have fun, Skål! Contact me if you want to make…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTraunwolf
Kornhalter M18
Kornhalter / Kornklemmhalter zum Klemmen des Korns im Korntunnel von Luftgewehren, bspw. Walther LG300, mit M18-Gewinde.
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLukasMedIng
Night lamp holder for IKEA KORNSNÖ
This is a small holder for the night light KORNSNÖ from IKEA. I designed it to put it onto the bed of my child for reading bedtime stories. Its notch fits onto board with a thickness of around 25 mm. The lamp itself fits perfect. I…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
Printablestitleunknown
Stressless Ekornes foot for vintage models
Printed in TPU and using 6 pieces around the diameter of the circular base prevents the metal base from resting directly on the floor.
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
Printablesdazi3D
Cover für G+E Stgw 90 Iris-Ringkorn
Ich habe mir ein kleines Cover gebastelt weil mir der originale Adapterschutzdeckel gebrochen ist. Das Cover wird einfach auf den original Korntunnel gesteckt (nicht auf das Ringkorn selbst). Leicht zu montieren und entfernen. Gedruckt…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGoto Dengo
Ekornes Stressless recliner remote control improvement
The remote control has very sensitive capacitive buttons. You can hardly touch them without one of the motors starting up. Operation without looking is not possible as the buttons cannot be felt. This cover eliminates the above-mentioned…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesManuel Barner
Kornträger /Visierbügel / front sight base for Mankung Alligator Pistolenarmbrust / pistol crossbow
Deutsch Kornschutzbügel / Frontvisier für die Alligator Pistolenarmbrust Dieses Modell ersetzt den originalen Kornschutzbügel bzw. das Frontvisier der Alligator Pistolenarmbrust. Es eignet sich als Ersatzteil für beschädigte oder…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHejaaa
IKEA IKORNNES drziak na stenu
Drziak na stenu s povrchom vhodnym na lepenie pomocou lepidiel typu Den Braven Mamut.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesEasy Target
K280 Korners (for 310mm bed and 360mm extrusion Kossel deltas)
Simple corner infill plates for any Kossel with a 310mm bed and 360mm extrusions on the vertices. Designed for my HE3D K280. My bed is about 1cm above the frame rails, so this matches that level. Underneath there is a large cutout running…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 5
P
PrintablesPaul Schumacher
Pokornyi Engineering 50/70 PCD Adapter
Pokornyi Engineering is a manufacturer of high quality DIY sim racing steering wheels and accessories. This is a model of the PE 50/70 PCD Adapter found here: https://www.pokornyiengineering.com/products/50-70-pcd-adapter This can be used…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
Printableskiliankoe
Meerkorn Mylly Plate
This is a replacement for the plate that pushes the soap down in a Meerkorn Mylly soap grinder. You will need a threaded M5 insert (the M5x5.8 mm from CNC Kitchen works great) and a soldering iron to melt it in. I suggest melting the…
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
Printablespipsel
Ablauf für Kornquetsche (Eschenfelder)
I wanted to mount my Eschenfelder Kornquetsche onto a table and have bigger containers. You need to print the part and then you can mount it without additional parts. It is recommended to buy a Ikea ENKELSPÅRIG, cut it in half and slide…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAxel Wingerter
Meerkorn Mylly soapmill pressure plate
This is a replacement pressure plate for the Meerkorn Mylly soap mill. The orginal plate worn out and I received a replacement part very quickly from Meerkorn after contacting them. Since the replacement part is now worn out as well I…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesZBM2
Char-Griller Akorn top damper handle
Replaces the OEM handle on a Char-Griller Akorn. Larger handle should give more leverage than OEM. I designed it to take allthread reinforcements, but so far it hasn't needed them. Must be printed out of a material with good thermal…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJindrove
Kornout – Scanned waffle cone with chocolate-style rim
A waffle cone, captured as a 3D scan: a hollow interior, a textured waffle pattern and an uneven chocolate-style rim. The scan's irregular surface is deliberately retained rather than redesigned. The photographs show the real supplied…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printables
Korn Pitchblack Pro Rack Mount
I created this replacement part for the rack mount of my Korg Pitchblack Pro. The replacement is more rugged than the original so the tightening of the rack screws won't break it. Fit is quite tight but snaps in place like the original.
P
Printables
Kornishon Girl (Gherkin Girl)
Kornishon Girl (Gherkin Girl) Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
P
Printables
Skadis Spice Rack - Ostmann / Hartkorn / Fuchs
Mount your spices to a Skadis pegboard in the Kitchen. This includes two designs, one for smaller diameter spices (Ostmann and Hartkorn fit well), and one for larger-diameter (most versions of Fuchs work). The small spice racks are…
P
Printables
Rack for spice jar (40mm, e.g., Hartkorn)
Simple holder for spice tin can mount under the shelf or on the door. Fits for all spice tins with a diameter of 40mm (e.g., Hartkorn). Onshape model for remixing:…
P
Printables
Ringkorn 2.0-4.0mm mit Organizer
Es lassen sich alle Ringkorn Einsätze praktisch im Organizer verstauen. Es ist kein unterschied sichtbar zu gekauften Einsätzen. Funktionieren ausgezeichnet fast gleichwertig wie Metalleinsätze nur viel günstiger.
P
Printables
Hook for IKEA IKORNNES
This hook snaps into place, holds tight, and doesn't move in any direction. Printed with PETG, 0.4 nozzle, 0.2 layer, 3 walls/top/bottom, 15% cubic infill. Warning: check your bar dimensions. This model is designs for a bar with 12.1 mm x…
P
Printables
Hartkorn refill funnel
A simple funnel to refill Hartkorn aluminium spice cans. Note to myself: check for existing solution first before designing something new ( here is a different one by @GrandPhil_822104 ).
P
Printables
Kornishon Girl (Gherkin Girl)
Kornishon Girl (Gherkin Girl) Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
P
Printables
Kornishon Girl (Gherkin Girl)
Kornishon Girl (Gherkin Girl) Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
P
Printables
Kornishon Gherkinman
Kornishon Gherkinman Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
P
Printables
Hanger for Ikea Ikornnes
This is a hook/bracket to hang an Ikea Ikornnes with tape or adhesive instead of the screws. I'm using some cheap aliexpress repositionable tape, but you can use whatever. When printing, I'd recommend using a healthy number of top layers…
P
Printables
Ikea IKORNNES mirror clamp Adapter
I've made this super quickly to mount the guitar mount on the back or side of an Ikea IKORNNES mirror. You'll just need to add three m4x20mm bolt and nuts
P
Printables
Legs for IKEA IKORNNES to make it robot-friendly
Lift legs for IKORNNES floor mirror to prevent it from being moved around by robo vacuums like Roborock or Roomba. Also prevents from robots getting stuck in the mirror frame.
P
Printables
Kornflakesdose
Eine Cornflakes-Dose Druckdauer für die Dose mit 0,6 mm Düse und 0,2 mm Schichthöhe 26 Stunden Druckdauer für die Dose mit 0,4 mm Düse und 0,15 mm Schichthöhe 41 Stunden
P
Printables
Korn Band Sign
Korn Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else might like one as well.…
P
Printables
Ikea Kornsnö Holder
Made this holder for my daughters night lamp from Ikea, she likes cats, hence the cat ears. :) Still learning 3D modeling, so this one was made in TinkerCAD. :)
P
Printables
Hartkorn spice shaker refill funnel
Simple funnel to refill a Hartkorn spice shaker without disassembling the lid. Just print it in vase mode with no top and bottom layer.
P
Printables
Support for Pokornyi shifter plate (rally diy)
I was trying to eliminate flex in my shifters from Pokornyi, so I designed my own support to reduce the flex. Now, there is almost no flex when using them. These were specifically designed to work with the Sparco L575 wheel, so I'm not…
P
Printables
Mag Fed Mini Rubber Band Gun Kimme und Korn Aufsatz;rear sight and front sight
Habe eineen einfachen Aufsatz erstellt