Liczymy pasujące modele…
Hey! This is a replacement cap for the standard Kuru Toga mechanical pencil. I lost mine shortly after buying the pen, so I had to print one in order to protect the eraser in the back end. The cap was designed in OpenSCAD. Use the caps to…
I printed this at .05 layer height and 100% infill with “Detect thin walls” enabled and seams aligned. Still needed a bit of sanding to get the perfect fit.
This is the back cap (goes over the eraser) for the uni KURU TOGA ELITE mechanical pencil.
Needs some post print tinkering, file the back of the part to fit the clip, as I am not sure how to model it :P Quick sketch I made as the shell on mine broke, open to any feedback, good or bad. 0.15-0.2 should be a good layer height.…
Everything you need for good design is a pencil and a piece of paper. So whenever I have an idea I do a lot of sketching. For this I love my Kuru Toga pencil and I keep it right next to my sketchbook, wherever I go. But it's tip is very…
This is a replacement cap for the Uni Kuru Toga eraser, in case someone misplaced it. The fit is quite precise, you will most likely need to tweak a few things, mostly X-Y Hole compensation. There are 3 variations : One with looser…
This cap will work with all Uni-ball Kurutoga () mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the…
print vertically, add brim if adhesion is not good and add fuzzy skin for grip https://cad.onshape.com/documents/d13e39564e0e5b00e78305cb/w/f8b8dd963e65954e513ddbf3/e/a93d04841e1c90d440275294?renderMode=0&uiState=6931d79bbd5a372fec2da91d
Replacement cap for Kuru Toga mechanical pencil.
I needed a lid for my pencil and maybe someone finds a use to it, too! I held the design minimal, only used chamfer like the pencil itself. I've uploaded two versions, an easy fit which has a higher tolerance and a snuck fit version wich…
A friction fit cap for a Kuru Toga Metal
This is a box for the Uni Kuru Toga Standard (model M5-450T) , with space for one or three additional Uni graphite refill packages. The refills I used are from Uni, model number UL-1405, size 67x13,5x6,8mm The base has a place for…
Pomôcka pre zváračku optických vlákien Fujikura 90S+ pritlači som použil PLA 100% výplň.
Have you had your daily cute pill? Characters seldom come as cute as Kuruna, the main character (avatar) in Pixel Princess Blitz, a Rougelike action RPG with cuteness all around. I'm SUPER looking forward to it. Thanks a lot for allowing…
===v.1.2=== I use M8*35 Flat head screw to add more weight to the both end. It can add 1 M8 Hexagon nut as shown. ===v1.0=== Skill toy test !! https://www.youtube.com/watch?v=PRv2Y0hQN80 Print Settings Printer Brand: Up! Printer: Up Plus2…
Flip the model upside down and insert
replacement eraser cap I made for the Uniball Kuru Toga Elite mechanical pencil because I lost the original one
Remix of K73TXT's cap. I love the pencil but the tiny eraser always had me reaching for other writing utensils. With this adapter, you can use the erasers with cheap BIC-type pencils to expand your eraser capacity. The original eraser can…
This is a print-in-place design for the Kuru Toga pencil. I loved the pencil, but the stock eraser sucked. This is a drop-in replacement that is compatible with the Papermate jumbo eraser or a standard pencil eraser and has a similar…
Astronomical symbol of Mercury. Edit dimensions how you need.
Kuruc cavalry insurgent refers to a group of armed anti-Habsburg insurgents in the Kingdom of Hungary between 1671 and 1711.
I made this model because i used up the eraser and wanted something to cover up the hole with. I needed something so the graphite rods don't slide in and out of the holder.
An organizer I made to hold my 2 uniball™ Kuru Toga mechanical pencils with spots for both sizes of lead holders and the erasers.
Beko Kurutma Makinesi Su Tankı Kapağı
A stand designed to hold the uniball Kuru Toga Pencil with a Pentel Eraser
Needs a well calibrated printer. Try to fit at 0.2 layer height, it worked for me. Screw and unscrew it few times until the screwing movement is smooth enough. You don't need full height, 7mm should be enough, cut or just screw it until…
I created this cable housing to hide the wires coming in and out of the skurup light. It is in the middle of a chain and thus has wires coming in and out of the fixture. To hide these i created a shell with a lid, that you screw in with…
Kuru toga standard cap. Designed to protect the mechanical pencil tip during carry. My standard kuru toga 0,5 grip is wrapped with electrical tape for better grip. Printed with PLA at 0,20mm layers, 5% infill, USE SKIRT/COLLAR print…
I didn't like the stock grip that comes on the Kuru Toga Advance Upgrade, so I designed this replacement.
Krabička pro mikrotužku Uni Kuru Toga s prostorem na náhradní tuhy. Krabička je inspirovaná modelem https://www.printables.com/model/975575-uni-kuru-toga-standard-box. Můj model má mnohem příjemnější úchop při vyndavání tužky tvarování…
Print in Place Box intended for Kuru Toga Mechanical Pencils. Includes an Organizer liner and a tube eraser holder and cap. Box is based on a Freecad file I downloaded from lukkot@lukkot_4640513
Modeled in FreeCad 1.1.3 Lost mine some time ago so I modeled one really quickly. Make sure your printer has 0.2mm tolerance. Printed at 0.2mm layer height with arachne wall generation using aligned seam. Printed in PLA.
This is a cap/ lid for the popular and well loved Uni Kuru Toga mechanical pencil. This pencil does not come with a cap when you purchase one. I am constantly on the move and had the read that breaking the lead tube at the writing end of…
A Hotwheels-sized model of the Karin Armored Kuruma from GTA 5 based on a 2015-or-so Lancer Included are single piece six-spoke wheels, however any standard Hotwheels wheels will do. To install them, put them on an axle (even a paperclip…
Printed in PET-GF for durability and to visually blend with other parts of the lamp.
I tried to clip the lamp onto a shelf that was juuuuuuust too big (5cm) for the clip to not slide off. Found this nice looking clamp model, and decided to use it as a base for a new mounting solution. DISCLAIMER: You will need to cut off…
Pomôcka pre zváračku optických vlákien Fujikura 90S+ pritlači som použil PLA 100% výplň.
A thin lamp shade that creates more indirect lighting on the ceiling. Fits on a IKEA SKURUP
Grab your T clips from here: https://www.printables.com/model/256896-skadis-t-clip-system
For all those who, like me, use the IKEA SKURUP work/wall lamp, black and, like me, no longer have the corresponding wall mount, here is a possible solution. Dimensions: Diameter: 70mm Total height: 20mm Height of the plate: 5mm Height of…
A Hotwheels-sized model of the Karin Armored Kuruma from GTA 5 based on a 2015-or-so Lancer Included are single piece six-spoke wheels, however any standard Hotwheels wheels will do. To install them, put them on an axle (even a paperclip…
Model to turn an Ikea Skurup Lamp (https://www.ikea.com/de/de/p/skurup-klemmspot-schwarz-30489027/) into an wall-mounted lamp. Used it to fix my lamp with a broken clip. Requires disassembly of the original Ikea Skurup of a cutter and 4x…
This part is a replacement adapter for the IKEA Skurup track light. The original cable sleeve that comes with the lamp doesn’t always fit well – especially if the cable comes out of the ceiling at the wrong angle or the sleeve doesn’t sit…
Just another battery compartment, because I couldn't find anything suitable.
The original lamp has a very light soft material on the base that prevents it from scratching the table. This wears out very fast. The previous install tinted my wooden table, so after I painted it black, I created this plastic cap to…
Printed in PET-GF for durability and to visually blend with other parts of the lamp.
I tried to clip the lamp onto a shelf that was juuuuuuust too big (5cm) for the clip to not slide off. Found this nice looking clamp model, and decided to use it as a base for a new mounting solution. DISCLAIMER: You will need to cut off…
A cable clip for your Ikea Skurup standing lamp. Print with 3 walls for best results
This is a basic model to repair an Ikea SKURUP work lamp. It works by clamping the rods in the 3D printed halves, and then with a 3D printed screws and the profile on the inside, the angle of the joint is easily adjustable. I printed…
A clip i made to hold my headphone in place when not in use on the Ikea desk lamp SKURUP
Ikea Skurup lamp comes with table and wall mount, but not rotating base. This makes Skurup to rotate. Printed pla 25% infill and 3 perimeters. Uses wall mount and metric nuts and bolts. Assembly picture has bom.
