P
PrintablesSplashySquid
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
Wyniki wyszukiwania: l10
Liczymy pasujące modele…
P
PrintablesMaks
Ключ для фильтров SL10 / Filter wrench SL10
Ключ нарисован, потому что потерялся комплектный, а покупать, это надо идти и искать незнамо где. Особенно, Москва - это “место где всё есть”. / The key is drawn, because the complete key is lost, but to buy it, you have to go and look…
- Pobrania
- 317
- Polubienia
- 15
- Ocena
- 0
P
PrintablesVincent Cordier
Funnel for Dreame l10s ultra
can be printed in PLA or PETG with 0.2mm layer height profile 2 or 3 perimeters. Make sure you use soap for robot cleaners. Follow the instructions in the pictures. I used my finger nail to remove the cap only the first time is difficult.…
- Pobrania
- 285
- Polubienia
- 50
- Ocena
- 5
P
PrintablesMrToToRo
Side protections for iflight XL10 v6
-I recommend printing from PETG with 100% infill. -The part is not symmetrical, you will need to reflect the 2nd half in the slicer. -I use Hobbywing 65A G2, most likely it will fit other ESC
- Pobrania
- 239
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSartor
Phisital XL10 carbon frame antennas and xt60 rear mount. Plus wires protection
Can be printed without supports. Wires protection must be printed in vertical orientation
- Pobrania
- 201
- Polubienia
- 8
- Ocena
- 0
P
PrintablesHamstersocke
iFlight XL10 GPS holder for Foxeer M10Q-250
The original iFlight XL10 GPS holder is for GPS modules with smaller antennas. I used the Foxeer M10Q-250 which has a bigger size of 25x25x8. This adapter fits the original end part from iFlight. Print at an angle (see pictures).
- Pobrania
- 165
- Polubienia
- 4
- Ocena
- 5
P
PrintablesTechnoVardo
Oil Filter Wrench for VStrom - DL1000
Fits the 14 flute, 65mm oil filter used by the 2003 Suzuki VStrom.
- Pobrania
- 159
- Polubienia
- 18
- Ocena
- 5
P
PrintablesOjOj
Oil plug wrench / Klucz do korka oleju 06L103801 / 06L 103 801 / 06l103801 / 06l 103 801 Audi S3/A3 8V 2.0TFSI
Kluczyk do zastosowania z kluczem 13mm lub grzechotką ¼"
- Pobrania
- 153
- Polubienia
- 14
- Ocena
- 5
P
PrintablesKeril_v_kube
JBL L65 L100 L300 4333 4343 4344 4350 and more Speaker Grill Pegs
Printed on Elegoo Neptune 3 Plus
- Pobrania
- 151
- Polubienia
- 7
- Ocena
- 0
P
Printablesdarkwomb
Makita Ni-MH 12v to Makita LI-ion BL1020B adapter
Makita 12v NI-MH adapter. For those who has old makita drill laying around and BL1020B battery. In short - you most likely know if you need it. There are 4 parts to print but you can get away with 2 as other 2 are just simple pins i…
- Pobrania
- 143
- Polubienia
- 14
- Ocena
- 0
P
PrintablesChili_nor
XL10 V6 Antenna mount for lumineer's duality antenna
XL10 V6 Antenna mounting for the lumineer AXII DUALITY HD o3 antenna, that retains the XT60 mounting. This mount supports the original GPS mount and my GPS mount created for the GEPRC M1025-DQ gps. Print the Tube itself in something…
- Pobrania
- 104
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLukaskun
Dreame L10s Ultra heat Gen 2 tools storage
This tools storage allow you to store a brush, an empty bag, the cleaning tool and an other place for accessories as the tricut spare brush. To fix it, i used 3M Strips to avoid to drill holes in the vacuum station. Print it upside down…
- Pobrania
- 102
- Polubienia
- 49
- Ocena
- 5
P
Printablesakimakes
G-clamp with hook and eye L10-25
Simple small g-clamp to be used as hook to hang towels, etc. The eye has a diagonal slit for inserting ropes, etc. Clamping length: 10 - 25mm. The screw is flattened and can be printed laying on its side for increased strength. A similar…
- Pobrania
- 87
- Polubienia
- 12
- Ocena
- 5
P
Printablespijusn
TP-Link TL1005D Mount
I used it to mount the switch under my desk. Holes are for 3mm screws. The switch is held in place by the snaps in the corners. Be a little careful about inserting the device into a mounted frame (tip: push it leveled rather than at an…
- Pobrania
- 83
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTom
Dreame L10s Pro Padholder
Update: Created a holder ring which is easier to apply. You can use your 3d printer pliers to press the rings on the base. --- Hello, I had the problem that the wiper pads on my Dreame L10s Pro would detach from the Velcro holders after a…
- Pobrania
- 78
- Polubienia
- 11
- Ocena
- 5
P
PrintablesGoto Dengo
Makita battery BL1013 protective cap
The leaf spring clamps the cap on the battery. Printing with PETG. With PLA, the spring effect would quickly diminish.
- Pobrania
- 68
- Polubienia
- 14
- Ocena
- 5
P
PrintablesPotato Stardust
Makita BL1014 Wall/Shelf Mount
Prints standing up with no support. Can be printed with either fine or coarse layers with little effect on functionality. *** Added Step and STL files.
- Pobrania
- 60
- Polubienia
- 8
- Ocena
- 0
P
PrintablesGarmor
Dreame L10s Ultra base station ramp
I lost the ramp of the base station of our robot vacuum during a move, so I designed a new one. The ramp is split into two parts so it fits on my print plate. I tried to somewhat copy the existing design, but it is not a perfect copy. If…
- Pobrania
- 55
- Polubienia
- 3
- Ocena
- 5
P
Printablesagio26
T-nut-M3-L10-L9.5-L9
It's good to have some T-nuts on hand instead of waiting for an order from China that never arrives
- Pobrania
- 52
- Polubienia
- 11
- Ocena
- 0
P
PrintablesHamstersocke
iFlight XL10 ExpressLRS receiver, antenna and beeper
This TPU part holds the ExpressLRS receiver, beeper and vertical antenna on a iFlight XL10 frame.
- Pobrania
- 51
- Polubienia
- 2
- Ocena
- 0
P
Printablesaweb
Dreame Robot Marble Caster Replacement (Fits L40, and probably L10 Pro L10s Pro X30 Ultra X40)
The front wheel/caster on my Dreame L40 broke in half. Apparently this is somewhat common. After spending 30-45 minutes disassembling it I decided I didn't want to have to do that again if it happened again, so designed this replacement.…
- Pobrania
- 48
- Polubienia
- 18
- Ocena
- 0
P
Printablesbigrocketguy
Unimat SL1000 Live Center
Printed solid with CF Nylon. Turned down speed on threaded area. Link for bearing:…
- Pobrania
- 48
- Polubienia
- 2
- Ocena
- 0
P
PrintablesInsaneDruid
Monitor opening tool for IBM 8513 CRT and IBM 14L10/15L10 CRT (Aptiva)
Small tool designed to open the internal case clips on IBM 14L10/15L10 (Aptiva) and similar Monitors. These clips can only be reached through a small vertical opening (see image1). Just insert the tool through these openings, making sure…
- Pobrania
- 47
- Polubienia
- 1
- Ocena
- 0
P
PrintablesZEROBiTE
Valve Bucket & Shim tray for Suzuki TL1000
This is a closeable container/tray with room for 4 valve buckets/shim pairs (1 cylinder). The lids has text printed on them to let you know which pair you put where. Fits Suzuki TL1000R/S with 28mm diam. buckets and ~8.5mm diam. shims.…
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPeyu
Subaru Forester SJ Cover Catcher 94053FJ000, 94053AL100
Subaru Forester SJ Cover Catcher Subaru OEM PNs: 94053AL100; 94053FJ000 Print inclined with organic supports, using the print post in the model itself. This reduces supports and keeps visible surfaces clean of support remains. Print post…
- Pobrania
- 46
- Polubienia
- 10
- Ocena
- 0
P
PrintablesFS4900
GameCube Picoboot & SD2SP2 Mod (DOL101)
Experimental - Will probably never be updated https://www.reddit.com/r/Gamecube/comments/122ikdn/picoboot_sd_card_mod_install_dol101/ I don't know if the parts will be compatible with other motherboard models than mine The back cover…
- Pobrania
- 45
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDreadPirateShawn
Makita battery Skadis mount (BL1014, 12V)
Skadis mount for Makita battery (BL1014, 12V)
- Pobrania
- 43
- Polubienia
- 5
- Ocena
- 0
P
Printablesbigrocketguy
Chip Tray for Unimat SL1000
Printed in 2 pieces to ease printing requirements and cleaning of it. PLA or any material works.
- Pobrania
- 43
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBenni
Hörmann EL101 Sonnenschutz, sun protection
Sun protection for the Hörmann EL101 light barrier, as direct sunlight influences the functionality Sonnenschutz für die Hörmann EL101 Lichtschranke, da direktes Sonnenlicht die Funktionalität beeinflusst
- Pobrania
- 42
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJan Kurek
Turn Signals Indicator Adapter Suzuki DL1000 (2014-2019)
CZ Adaptér pro montáž univerzálních směrových LED světel https://www.aliexpress.com/item/32880546232.html?spm=a2g0s.12269583.0.0.633e42a744FoPJ ). Montážní adaptéry se dají také koupit, ale na DL1000 2014 > neapasují (i když prodejci…
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 0
P
Printableskaytek
pz35 VIJIM VL100C Light Adapter
Credit to @anonxyz for the awesome work making the base design, this is just a simple adapter for the VIJIM VL100C light ( Amazon ) with space up to 3mm for a diffuser cut to size 40mm X 50mm (this is the acrylic sheet I used Amazon ). I…
- Pobrania
- 38
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSiris Rui
UDL1014 Nerf Shell V3 (with customer bottom rubber ring)
UDL1014 Nerf Shell V3 (with customer bottom rubber ring) Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
- Pobrania
- 37
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCastulus
Denon DL103 cartridge cap
There are plenty of replacement bodies for the Denon DL103 and DL103R, that require stripping of the cartridge. This cap can simply be put over the cartridge to reduce resonances of the side walls of the original body. I wanted to test…
- Pobrania
- 36
- Polubienia
- 1
- Ocena
- 0
P
Printablesand7ey
MiniWare MDP-L1060 Electric Load Rugged Case
This is a remix of MiniWare MPD-P906/MPD-M01 Rugged Case adapter for MiniWare MDP-L1060 Electric Load that is alone about 5mm thicker than MiniWare MPD-P906/MPD-M01 modules. I also made top and bottom +2mm to original so that they provide…
- Pobrania
- 36
- Polubienia
- 9
- Ocena
- 0
P
Printablesskidsolo
1975 Honda GL1000 shelter hinge bearing and grommet, front brake hose rubber
Print rubber grommets in flex and the hutch hinge bearing in PLA
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
Printableswalters on-tour
RIM for Worx 147E - L1000
Das das Gummi von dem Reifen des L Roboters nicht zu lösen war, es aber auch kein Ersatzreifen von Worx gibt - hier jetzt die Felge - ich habe für das Thingiverse Teil: https://www.thingiverse.com/thing:4602940 die Löcher zum…
- Pobrania
- 35
- Polubienia
- 1
- Ocena
- 0
P
Printablesarthur1234
BL1013 Fan handle remix
Remixed the handle to accommodate BL1013 10.8V Lithium batteries, feedback appreciated, as the original suggests, contacts need to be glued inside, sacrificing power switches for these seems to be the best solution to this problem.
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSt
Unimat SL1000 DB200 Yaxis covers
The Unimat lathe has no cover over it's Y axis, where most of the chips collect. These two covers allow turning and drilling operations and this way you can protect you ways. They are installed via magnets and work very well. Video:
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesHamstersocke
iFlight XL10 2.4GHz ExpressLRS back antenna
This TPU part holds the back antenna (2.4GHz ExpressLRS) on a iFlight XL10 frame. Print on the side (see pictures).
- Pobrania
- 32
- Polubienia
- 0
- Ocena
- 0
P
Printablesdanbi
Sun shades for the Hörmann EL101 barrier for garage door
One of the issues the Hörmann light barriers (EL101 at least, what I have) is that it is blind when illuminated by the sun resulting in inability to close the garage door in such situation. This applies to both the sender and the…
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPascalou
Morningstar ML10x brackets
This is some brackets to install a Morningstar ML10x audio switcher to a Templeboard. I didn't want to use the glue on plate so I've designed this system. Just use some M4 brass inserts in the brackets holes and you are good to go.
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
Printablesskidsolo
Honda GL1000 Carburetor inlet rubber
Print in FLEX 70 % infill does not have to be super flexible I used cheap Chinese flex from amazon. best printed with the location notch down.
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSt
Unimat SL1000 DB200 lathe - connecting plate for a sewing machine motor
See this connector applied:
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
Printablesskidsolo
Honda GL1000 ignition cable clip
plastic clip modeled in space claim to hold ignition leads apart
- Pobrania
- 29
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPatrik CK
NEEWER FL10 Gobo Filters: Blank Template + Custom Designs
The FL10 ships with 20 gobos and NEEWER doesn't appear to sell replacements, so I measured one and modeled a drop-in blank you can cut any shape into. Included are my checkmark and X designs, which I use to project a verdict onto products…
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
Printablesbigrocketguy
Unimat SL1000 Stantions/Dampers
This model was designed to raise the Unimat SL1000 2.5" off of my table using the holes and cast base given. I used long M3 bolts to clamp to my table. Printed in Nylon for strength and to dampen any vibrations. 20% infill or more works…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
Printablesmultifunk
Clip for JBL L100 Mk2 Speaker Grille
A replacement clip for the grille of JBL L100 Mk2 speakers. Designed for a perfect fit, this clip keeps your grille securely in place. The outer diameter may require slight sanding for an optimal fit.
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBent Derailleur
Bahtinov mask for PL100-400 lens
Right in the middle of astro photo season I got my printer so I could do this astro focusing aid mask for my super tele lens. Should make focusing on the sky elements a breeze. Made it fit the built-in small lens hood. Inner diameter of…
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAudiotec Fischer GmbH
Brax ML10 Speaker Stand
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesHamstersocke
iFlight XL10 anti-spark module holder
TPU part to fix the anti-spark module in a iFlight XL10.
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBubTec
Scuba Universal Bungee Mount Goodman Dive Light V2 (Wurkkos DL10)
A universal lamp holder for the hand. Update: In version 2, the thickness was increased so that the nodes are completely hidden in the holes. Category: Hobby
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMade By Dennis
Siglent SDL1020X-E Desk Bracket
This bracket features 4 banana jacks to allow easier connection of loads and for easier access to the rear voltage sense terminals. Print Settings: 0.2mm layers. 20% infill PETG No supports But be sure the printing orientation is…
- Pobrania
- 17
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMQW
Makita 12v Stand BL1014
To print this, I recommend printing it with the feet on the build plate. No support is needed to print this, as there are no significant overhangs. This part is pressure-fitted to the battery, so there is no adhesive needed to attach it.
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDavid
Soporte fotocélula horizontal SICK WL100
Soporte para evitar golpes en una fotocélula SICK Wl100 montada horizontalmente.
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNikita Shutov
HiWatch DS-l103 camera wall mount
Printing with standard settings for 0.4mm nozzle. No support or brim required. You will need 4 x 6x3mm neodymium magnets and cyanoacrylate glue if you decide to use magnets. 2 x M3x20 screw, nut and washer to attach the camera to the…
- Pobrania
- 16
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAndy Forsberg
Mounting Brackets for B.K.Licht BKL1003
These are improved mounting brackets for B.K. Licht LED Light Bar Type BKL1003. I purchased this light off of Amazon .de. It is a great light, but the provided mounting method is not very secure. I designed this brackets to fix this…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBoopidoo
VIJIM VL100C Bouncer
I’m using the LED light for negative scanning, but the individual LEDs were too distinct and appeared in the images. To solve this, I designed a diffuser that blends the separate LEDs into a single, more uniform light surface. A frosted…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTimeless3D
iFlight XL10 V6 Front Bumper
Slightly chunkier front bumper for the XL10 V6. Uses stock hardware.
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJust_Adrian
Godox mount to mini bowens adaptor ml100i
Its my very first 3d model made because i found that there are no mount adaptors for the godox ml100i softbox lantern i bought, so i made one that works. I use it to adapt it to an Ulanzi C01 100w cob bi color light. Feel free to adapt,…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLukaszemko
bearing punch for vstrom dl1000 klv dl650
you will need plastic 40x1.8 pipe >30cm of length upper cover is made with use of PETG with high infill lvl (white one) lower cover is made with use of TPU (transparent one) to not demage new bearing. you can also use old one to harden it…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTimeless3D
Immortal-T Arm Mount, for 15mm Arms (iFlight Nazgul XL10)
Based heavily on the 15mm mount by AsTroBot, but modeled from scratch by comparing the two 3D files side by side. Basically the same design, but for two zip ties instead of one.
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChili_nor
Bardpole mounting UL10
Mounting for the BARDpole style antennas based on Gquig's antenna mounting. Print in PLA or PETG, part should fit semi snug around the standoffs with no play. Rest of the mount can be found here https://www.thingiverse.com/thing:5180061
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesertab
HSW - BL1013 battery holder
HSW - BL1013 battery holder a holder for the BL1013 battery on hsw wall printed in esun pla infil: 40% cubic (probely overkill) print time: took 1h+- on prusa mini+
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHitLuca
Dreame L10S ultra vacuum valve/flap
After years of use, my Dreame L10S ultra lost its vacuum valve (or flap? not sure what's the proper name here) on the back, which I assume is there to help with maintaining a good vacuum while cleaning. For this reason I tried to look…
- Pobrania
- 12
- Polubienia
- 5
- Ocena
- 0
P
Printablesctheroux
EN-EL10 Battery Tray
This is two battery tray design for the EN-EL10 batteries. They are used by Nikon for their point and shoot cameras. One of the design holds 6 batteries while the other one holds 4 batteries at an angle for a lower overall height. It can…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
Printablesfunkysod
Paper cutter finger guard replacement - ClassiCut CL100
Paper cutter finger guard replacement for the ClassiCut CL100. Original part broke and is a bit bulky. You'll need a piece of lexan or similar material. Two screws, I used salvaged ones approximately 2.5 mm in diameter and 12 mm long.…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTimeless3D
iFlight Nazgul XL10 V6 Crossfire Diversity Mount
Basically the same as the stock receiver mount, but slightly bigger so it can fit a Crossfire Diversity receiver.
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDr.Daniel
Fenix HL10 Baby Stroller Adapter
I printed it in PETG It is for the old variant of the Fenix HL10
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
Printablestomelectricite
Serrure manuel escabeau Hailo TL100
les serrures hailo cassant sans arret je l'ai ai refabriqué en impression 3D, à imprimer à 45degré pour que les couches soit dans le bon sens, testé en ASA et ABS qualité top.
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSpears Technologies
FPV / Pixhawk / Ardupilot 3d Model Accessories for AOS UL10 Cine
In PLA. Print 15% infill with support on the build plate and organic supports. .20 balanced or structural. In PC Blend. Print 15% infill with support on the build plate and organic supports. .20 structural. Brace and Lock - Keeps the arms…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
Printablesbando fpv
iflight nazgul xl10 gopro+ hglrc m100pro gps on front
can switch gps holder. just let me know. using tpu 95A
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJust_Adrian
Godox mount to mini bowens adaptor ml100i ver 2 mini
its the newer more better vers of the first one that is on my profil
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCreator_Felix
Adapter for the extraction system for "Bosch GTL10 XC"
The adapters from the exraction systems are usually too short. This adapter acts as a connector. Dimensions: Thicker part: 62 mm Thinner part: 57.5 mm Length: 80 mm Print with 100% filling Just print and have fun! Check my other posts…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesbarber1303
Kawasaki Eliminator ZL900 ZL1000 Air Filter Element Holder 13091-1378
This is a frequently misplaced item from the airbox of a 1985-86 Kawasaki ZL900 and 1987 Kawasaki ZL1000 Eliminator. The original part was too large for my print bed, so I split it in two with a simple lap joint that should be superglued.…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFri
IKEA LED Lamp Mount L1001
I lost the original slide mount of the lamp and wanted to create a short mount for the lamp itself. Print orientation: on the smaller side or just place it on the bed with the slide side upward and 80% infill. Printed from PLA and mounted…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKevin Barker
Gridfinity Bin for Makita CXT Flashlight ML107
This bin is designed specifically to hold the Makita CXT LED Flashlight (ML107) for Zach Freedman's Gridfinity system. There is a slot for the orange diffuser that is included, and the flashlight still fits in the bin even with the…
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRazvan YO3LCC
Desktop Cradle for Motorola Lex L10
This 3D Desktop Cradle is specially designed for the Motorola Lex L10, providing a practical and elegant solution for desks. The Cradle allows secure positioning of the device while integrating a charging function through pogo/spring…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesQuinn Mooney
HL1060Z 100W Laser Cut Front Vent Hood
After a week where I laser cut for hours a day, my throat was hurting despite having an extractor system. I designed these to reduce smoke from the front intake vents as well as reduce the risk of reflected beams coming out of the front…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printablesblazr
Reparaturwerkzeug für Wartestuhl ML100L
Das Stuhlmodell der Herstellers hat eine kleine Stabilitätsschwankung an der Niete für die Rücklehne. Gerade bei etwas größeren Menschen oder bei längerem Gebrauch des Möbelstücks, löst sich gerne die Niete der Rückenlehne. Diese kann man…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesOlivier Le Mô
Hormann EL101 cells sun shade (stronger remix)
The part exhibits a point of weakness at the intersection of the two faces, creating a potential fracture point. I rectified this by joining the two faces; it is now significantly stronger (La pièce présente une fragilité à l'intersection…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesProject 3d Lab
Makita ML100 – Organizer Gridfinity
Organizer Gridfinity progettato su misura per la Makita ML100 . Permette di riporre la lampada in modo ordinato e stabile, mantenendola sempre facilmente accessibile all’interno di cassetti o moduli Gridfinity standard. Il design è…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Serrure manuel escabeau Hailo TL100
les serrures hailo cassant sans arret je l'ai ai refabriqué en impression 3D, à imprimer à 45degré pour que les couches soit dans le bon sens, testé en ASA et ABS qualité top.
P
Printables
Gridfinity Bin for Makita CXT Flashlight ML107
This bin is designed specifically to hold the Makita CXT LED Flashlight (ML107) for Zach Freedman's Gridfinity system. There is a slot for the orange diffuser that is included, and the flashlight still fits in the bin even with the…
P
Printables
Adapter for the extraction system for "Bosch GTL10 XC"
The adapters from the exraction systems are usually too short. This adapter acts as a connector. Dimensions: Thicker part: 62 mm Thinner part: 57.5 mm Length: 80 mm Print with 100% filling Just print and have fun! Check my other posts…
P
Printables
FPV / Pixhawk / Ardupilot 3d Model Accessories for AOS UL10 Cine
In PLA. Print 15% infill with support on the build plate and organic supports. .20 balanced or structural. In PC Blend. Print 15% infill with support on the build plate and organic supports. .20 structural. Brace and Lock - Keeps the arms…
P
Printables
Dreame L10S ultra vacuum valve/flap
After years of use, my Dreame L10S ultra lost its vacuum valve (or flap? not sure what's the proper name here) on the back, which I assume is there to help with maintaining a good vacuum while cleaning. For this reason I tried to look…
P
Printables
iFlight XL10 anti-spark module holder
TPU part to fix the anti-spark module in a iFlight XL10.
P
Printables
iFlight XL10 2.4GHz ExpressLRS back antenna
This TPU part holds the back antenna (2.4GHz ExpressLRS) on a iFlight XL10 frame. Print on the side (see pictures).
P
Printables
iFlight XL10 V6 Stack Protector
Removable stack protector for the XL10 V6, with infinite strap adjustment. Designed with ABS in mind, although it should work for other filaments. Vapor smoothing suggested.
P
Printables
Thumb Grip for Lumix DC-L10
This simple thumb grip allows full access to all camera controls while providing a more secure and comfortable grip compared to the original shape. Several versions are included in the .3mf file (Made in Bambulab): Standard smooth version…
P
Printables
Lumix DC-L10 EVF Cover / Viewfinder Protector
his is a 3D-printable protective cover for the EVF/viewfinder of the Panasonic Lumix DC-L10. It is designed to protect the viewfinder area when the camera is being stored, transported, or carried inside a backpack or camera bag. The cover…
P
Printables
Makita CL108 vacuum pipe wall mount
Wall mount for a Makita CL108 vacuum pipe wall mount. Also suitable for other pipes with a 32mm diameter.
P
Printables
Leveling feet for Detecto DL1060 scale
We have a Detecto DL1060 scale at work. Somehow one of the leveling feet went missing and that is kind of a problem with the county's Weights and Measures department, so we needed a replacement. Wouldn't you know it? You simply cannot buy…