Zircon StudSensor L50 Skadis Mount
Mount for the Zircon StudSensor L50 compatible with IKEA Skadis pegboards. Would like to do a v2 with rounded lower corners, but this is functional.
- Pobrania
- 60
- Polubienia
- 3
- Ocena
- 5
Liczymy pasujące modele…
Mount for the Zircon StudSensor L50 compatible with IKEA Skadis pegboards. Would like to do a v2 with rounded lower corners, but this is functional.
Update : After using this in the 40C weather and putting in a few thousand km this summer, I made a few changes, to increase the strength of the main piece. Mine never broke, but I like this update a bit more. 7/10/2023 This model/remix…
A surround for the Speedometer/display unit. Note: This surround / binnacle. / cowl is designed with button cut outs and from measurement of the two button digital display as fitted from model year 2020 onwards (led headlight models)…
PegLock system by Sy's. This is a remix to hold the Zicron L50 stud finder. This is a nice fit with a slight squeeze at the bottom to hold the tool in place. https://www.zircon.com/tools/studsensor-l50/ Print Detials: VoxelPLA .25 mm…
Barrett cal .50 rifle muzzle brake for L96 WELL MB01 airsoft guns. I recommend printing from PETG. The thread is P M24X1.5 This is only an imitation for an airsoft gun
A version of the tail light mix specifically for my L508. I printed it in ABS, it needs support and it works great!
Rejilla versionada, compatible con Dometic L500, para salida del calor de la nevera de las caravana y autocaravana. IMPRESIÓN: Material PETG Tres perímetros en la pared. Soporte para zona de enganche de la rejilla, realizado con material…
Dual cage for Motorola XTL5000. This has all the rear cutouts and both units slide in with ease and has a secure fit.
Strimmer Spool Cover Black & Decker GL5028 I suggest to print it vertically for greater tear resistance of the two side grafts Support: Yes Material: PETG
I made flat feet for my Amazon TV, because it was too big (to high) for the place I wanted it to be. Saves a few cm compared to the original feet. Fits TV: QL50F601D I have no Idea if it fits other (Amazon) TVs too, because I have only…
I got tired of my headset hanging off the side of my computer monitor when I wasn't using it. It would also block a portion of the screen. There isn't another good place to hang the headset so I made this model as a way to hang the…
Thus is Hood Release Latch for Mercedes CL500 W215. This is very hard to find online for purchase, so I modelled it. Better print it using PETG to handle better outdoor temp or even ABS. I test printed it using PLA and PETG but not ABS.
I wanted to mount my bike lamps to the thin bar of my bike rack, which I wasn't able to do with the original mounts. I uploaded two versions: rounded back with holes for zip-ties flat back without the zip-tie holes (for easier…
Magene L508 Halter für die Satteltaschen Ich nutze sie selber an meiner Ortlieb Seat-Pack QR und Rovativ
This a remix of https://www.thingiverse.com/thing:5443913 The only change is that the mount is rotated by 90º since the Magene one is like the Garmin Varia but reversed. The ring border has a glitch on one side but doesn't affect the…
Sized to fit Honda SCL500 but should fit other bikes that use same rear brake fluid reservoir. Support material required for the window. Doesn't use much and this should be a quick print. I don't think you need consider ASA. You can use…
This is remix of two model https://www.printables.com/model/857615-garmin-varia-bontrager-blendr-saddle-mount and https://www.printables.com/model/439489-magene-light-l508-saddle-bag-mount Magene mount 90 deg rotated and do'nt work…
Remixed for my Magene L508 and it works great on top of my strida cushion!
I recommend printing with as sliced with a 0.4mm nozzle. The model should be fully dense. We did have to clean up the round hole on the bottom side with a 5/32 drill bit for a very good fit.
angepasstes design der Kettengleitshciene der Honda XL500R. zu Montieren wie das Original
E-Flite BL50 motor & ESC mount with ventilation and air scoop with cowling. Specifically designed for my highly modified Sig Kadet Senior electric conversion. Could be used on other planes that it fits onto firewall. V1, V2, V3 uploaded.…
The light from Decathlon did shine too much so I made a cover. It is with slot for the charging port.
I neede some simple and decent looking cover to provide shade for speedometer on my Honda CL500, so I made this. It can be tightented by self tapping screw, but I tested it without it and it holds firmly even in higher speeds. Printet…
This remix contains files for using the MyActuator RMD L5005 CAN motor, 10mm panel mount switches (longer space behind the switches), a trigger to use ALPS RK09D117000C potentiometers. The handle must be mounted using a 603 bearing and M3…
nachmodellierung des rahmenschutz kettenschleifers der Honda XL500R
Nachmodellierung des Original Kettenschutzes unterhalb des Kettenblattes.
To use the case you must remove the broken clamp stub using a file. Print it in PLA .2 mm resolution.
Tool to remove an FL500S oil filter, there are 2 sizes check your filter first.
Ich habe ein unbenutzte Gleitschiene für die Antriebskette gefunden und diese mal probiert zu digitalisieren. Weitere Infos sind im XL500 Forum zu finden. Das Modell wird noch verbessert werden. Der Link zum Forumsbeitrag:…
My own design for Ender 3 Pro with Klipper. I use KLACKENDER as Z probe and bed mesh. -Direct drive extruder with BMG & E3D V6 combo, NEMA17 Pancake is enough for high speed printing. -Volcano hotend can be used but duct need modifying…
leicht verlängerter Federbein Spritzschutz für Honda XL500 R. schliesst somit bündig ab und lässt keinen spalt vorm Federbein
Update 2023-07-03: The newest version is a bit wider and deeper. I now also features round holders for the batteries, which will reduce the printtime aswell as reduce wear and tear on the cables. As mentioned bevor this cover holds 4…
Modellierung des Bremsgestängeschutzes der Honda XL500 R
I need to take a saddlebag with me on long rides with spare tubes etc., so the seatpost mounts are no good for the radar. I created this mount for my saddle bag (Topeak) to allow me to swap between bikes with the removable clip, or…
DO NOT PRINT - FIXES IN PROGRESS Slight design change from photos and instructions, new design the front face and slider panel twist together No additional hardware necessary Fits Models Eufy L50 SES and L60 SES Congo 10000, 8090 Ultra…
Mudguard for Decathlon Oxelo L500 children's scooter. Slightly reinforced compared to the original. Printed from PETG.
Move the speedometer to the handlebars to free space for a screen in it's original placement. I also have the 3D print model for the screen mount. I used PETG, which seems to do the job.
Ohne Supports aus TPU druckbar. Passt gut und ist stabiler, als die Gummidinger, die man online kaufen kann.
ELOPS CL500 sold in Decathlon has both white/front and red/rear mode. Unfortunately, in the light/front mode, the light blinds the driver. The blind does not cover the USB port, nor does it prevent the light from being removed from the…
Install a Carpuride screen in the original speedometer position. I also have the 3D print model for moving the original speedometer to the handlebars, to free up the space for the Carpuride. I used PETG, which seems to do the job.
This module for the Sony SEL50F18 was designed for the MMSS by Jorge Rui. The different modules should have something for everyone. Important : Even if the lens fits into the 2x2 version, I cannot recommend this, as the distance to other…
Shock Cover compatible with Honda SCL500 motorcycles. Also called a dust or mud cover. Makes the bike look so much better. The middle tab on the back side MAY have to have just the slightest bevel put on it to snap in the slot, YMMV. It's…
Holder for Quoya QL500 samrt curtains remote control. Suitable for fixing with doubleside tape.
This is a linkage rod for Bosch EL500 Smart Lock. Compatible with 50mm thickness door. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: eSUN PLA+ Category: Replacement Parts
Scan of a Wuben L50 Torch made with Creality Raptor and AESUB scanning spray
Schluss damit, dass die Fenix HL50 Taschenlampe ungewollt in der Hosentasche oder im Rucksack angeht und dann die Batterie leer ist. IEine Schutzkappe für den Einschalter hilft Abhilfe. Komplette Dokumentation unter…
Locks the microphone in place when not in use on a Dell WL-5022. Since the Dell WL-5022 actually is a rebranded Poly / Plantronics headset it might also fit similar headsets like the Poly Voyager 4000-series. STL, STEP and F3D files are…
Krytka baterií pro dálkový ovladač TESLA L503 k duálnímu Set Top Boxu TESLA T2 h256/HEVC
Drive belt for 4wd. Original cam belt contains reinforcements that prevent stretching and that is difficult to 3D print. This belt is as thick as possible to minimize stretching but it do jump teeth quite frequently so it is only for…
This is a simple adapter to mount your Garmin Varia or Magene L508 to your Topeak Zi:RAK (currently only tested with Magene L508). To completely assemble this mount you need a Garmin mount plate (I used these ) 2x 5x5.8 threaded inserts…
Der Drucker PL50E kommt aus China und ist unter verschiedenen Markennamen erhältlich. Er kann bis zu 4" breites Etikettenpapier beliebiger Länge bedrucken. Im Inneren sind zwei Führungsstege, die das zugeführte Papier zentrieren. Leider…
Move the speedometer to the handlebars to free space for a screen in it's original placement. I also have the 3D print model for the screen mount. I used PETG, which seems to do the job.
E-Flite BL50 motor & ESC mount with ventilation and air scoop with cowling. Specifically designed for my highly modified Sig Kadet Senior electric conversion. Could be used on other planes that it fits onto firewall. V1, V2, V3 uploaded.…