63 modeli
Made from a carefully arranged 65x52x198 mm block of interlinked rings supported together, this 3D print expands into a chainmail sheet measuring nearly 1.5 meters long and 6 centimeters wide. It was printed on a Prusa Core One. See it in…
Print boxes twice. Use supports for top. Optionally, print also lock. Once as it is and another one mirrored. Stick locks into grooves in the bottom. Small boxes will be fixed in corner positions but you can still take them out. This is…
This model consists of the Levels 60-380 structure portion of the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a…
This is an improved version of the original heliochronometer sundial base design. It allows one to level the base and make true north adjustments without any additional hardware. It is also compatible with the original heliochronometer…
Hello! I designed this model for succulents and cactus lovers, the size of this pot is great for office desk, or for a window. Is W: 5inch L: 8.1inch (W: 13cm L: 21cm). The pot have drain holes and a plate base, so you dont worries about…
This exists because I am procrastinating on making progress with python, Linux and learning to better utilise my pis. I have driven this around my house using a pi & Adafruit motor hat like a little FPV car, controlling it from my PC, and…
Once again I have designed something and sent it to my 3D printer. The following "Pencil Box" - in German you would probably call it "Federtasche" - has come out of it. I used a wooden one as a template, which I made a few decades ago as…
Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the layer adhesion by breaking it - A bridge, from 30mm length in the back to 35mm in the front -…
A bird-bath with different height-levels. I "needed" a bird-bad for the garden and a small project in OpenSCAD for fun. It is a simple model and basically nothing more than four cylinders put together. Since i used an additional…
iPad or Tablet Stand with 2 Tilt Levels & Charger The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time, you can do it via: https://www.paypal.com/paypalme/avicode…
this is a remix of (Hot Wheels & 1/64 Scale Car Lifts) By GigaPenguin.
The three-tiered stand that comes with the Rummikub Travel was too small for me. So I created this model that allows for an extra row and also fits in the original box. It's compatible with the original Rummikub Travel stand legs. If you…
Compatible with 1'' OD PVC Pipes I tested a 3 level configuration and 1.7 ft long. No need for more supports nor anything. I guess it would be needed for longest pipes. Tolerances are quite tight and like 0.1 mm off, a little sanding…
Three different grip strengths: no texture / oval texture / round texture for whatevery suits your needs and preferences best! Print Settings: Layer Height: 0.2mm Nozzle diameter: 0.4mm Duration: 3min Weight: <1g
TROFAST inserts for small boxes (20x30x10cm)! Look at IKEA_TROFAST SMALL_box insert if you prefer bigger boxes instead. Optionally, print also lock. Once as it is and another one mirrored. Stick locks into grooves in the bottom. Small…
Maze puzzle Box. 2 levels
Dieser Rummikub-Ständer bietet jeder Farbe eine eigene Ebene. Dadurch lassen sich die Spielsteine übersichtlich sortieren und schnell finden. Perfekt, um das Spiel aufgeräumter und angenehmer zu gestalten. This Rummikub tile stand…
Two levels bussines card holder. Material: PLA, PET-G, etc Layer high: 0,3 or lower No supports needed
1st level has an angle in the base, it helps the stability. Apply CA glue between the levels for extra stability. n
A sculpture depicting cascading levels - abstract art. This is self-supporting and should not require any supports. Please "like" this file if you collect or download it. _________________________________________________ The resin print…
The floor beams and decks represented in the Fairscape1 LUT are prettu close in exterior shape and size. Unfortunately they were inaccurate in size , layout and type on the interior areas. The original floors were solid while the real…
This is the updated revision of my propagator: I've added a dock that allows manage and get water in excess that may come if you decide not to use it on a planter/soil
Wasn't able to print the original because it was too tall. Dropped it down to a 4 level.
UPDATE: More platform sizes, ramps, rivers & waterfalls, beaches, & accessories (pier, bridges, trees, more to come) are now posted on MakerWorld.com . Join me over there and leave a 'Boost' if you find these helpful! Animal Crossing…
As I wanted to organize my Sola spirit levels, I designed wall mounts for them. The wall mounts can of course also be used horizontally.
Since we could not find a Sierpinski triangle with varying levels of detail for educational purposes (all the ones we found had only one determined level), we decided to make our own. We hope it can help fellow mathematics teachers out…
I just merged the two linked models by Thomas and idesire90, used the fan described in the PSU model (see below) and printed this in PETG to allow some better heat resitance. I used this feets https://www.thingiverse.com/thing:6279072 I…
Description: Perfect for 1:64 Hot Wheels or Matchbox cars Holds 2 cars – clean and space-saving display Sleek and minimalistic design Great for collectors or as a gift Print Details: Designed for 1:64 scale cars Prints without support…
Explore repeating fractal patterns by comparing the different levels of pyramids. See how stacking the lower levels add up to the higher levels.
4 different levels of Menger Sponge. When the cube is set to 10cm, the smallest holes size is 1.2mm
These are some test prints I made to help level my bed while it's printing. They are currently made to fit a 225mm x 145mm bed, which would cover the MakerBot Replicator Dual, FlashForge Creator Pro, PowerSpec Pro 3D, etc. It helps to see…
Everything printed fine in 0.20 mm layer height, except the covers. I printed them in 0.08mm but you can try 0.12 or 0.16 as well. The parametric freecad and step files are attached for easy remixing.
V2.0 Update for clean numbered prints A two part system for storing your Pittsburgh I-beam levels safely and securely on walls or garage door for convenient First Order of Retrievability. Printing in PLA (Matte), 25% infill, Adaptive…
This is a set of three levels you will need to print each of them on their side so that they work best only the 360 level needs support. The center gage should be facing up, the disk can be printed on its flat side or edge, but the edge…
This is just some more parts for bglasford1's Functional DSKY. https://www.printables.com/model/272162-functioning-dsky Alternative keycaps for the Functional DSKY model. The trick is to print them as 0.16mm layer height. Make sure that…
Printed and Tested on 2011 Toyota Corolla. Requires disassembly of JBL Remote and mounting into switch plate. Marked Body can be imported into slicer with marks or not. Marks are separate STL to enable easy multi material panting. Model…
Ikea systems are quite versatile to fit a large range of customers wishes with one model. This however means, you have to deal with the cosmetic flaw of uncovered 5mm holes all over the insides. From pre-drilled options for board…
A simple card holder designed for people with disability. I made it for someone who is has an hemiplegia and can only play with one hand. He needed a card holder stable enough so he wouldn't flip the holder on the table. There are…
This is intended to be created in PC and solvent bonded using a polycarbonate solvent. I'm not sure as to the fill.
Love this tool, just wanted to take it one step further and add the length for a 7-speed cassette to make it clearer for new techs and speed hub organization in the shop Basically, if it lines up with the level it can do that speed, Fun…
1x2 3U Gridfinity bin that stores two specific camera levels that mounts in the camera shoe. Specifically these two:…
To be used as a devider in the 2 levels Ikea trofast box insert. At the moment the model is only for the top level . It can't be used in the bottom level. I've added too little tolerance (1mm gap) and it could be a bit lower (1 mm). Wil…
This is a game that is primarily intended for children … but it can also be quite a challenge for adults! There are 4 different colors - 16 tiles in total - which are divided into the 4 columns. At the start, every color must be in each…
This is a drilling template designed to help you easily install double or triple electrical wall boxes (68mm diameter) in plasterboard (placo) walls. It aligns perfectly based on the position of your first hole, allowing fast, accurate…
Level up your projects with this handy 3D-printable adapter! Designed to fit a 21mm inside-diameter jack stand, it provides a secure 1/4-20 UNC thread for mounting your laser level. Perfect for precise height adjustments by simply pumping…
when i got my first resin printer i realized it was pretty important to have the printer its self level so the resin in the vat stays level with the fep. at first i just used cardboard under the feet on the voxelab proxima then someone…
Useful 1-2-3 levels drawer dividers, separators, organizer. These can be combined on the same level with each other as desired. These can be stacked on top of each other. Compatible with commercially available, known, famous, plastic…
This is a fitting designed to be inserted into a 1 3/8" hole drilled into the top of an auto top-off reservoir or other covered container fitted with a Neptune System Water Level Sensor. It allows the sensor to be mounted in places where…
This is a simple shelf design that fits in a corner - ideally / most easily it is fixed to the wall using double-sided tape of sufficient strength. Printed in PLA with a default settings (sufficient walls to make solid) printed on one…
I used this box to connect a SK6812 RGBW LED Ring (Adafruit NeoPixel Ring) to a Raspi in order to have some lights for the Pi Cam Parts: 74AHCT125 (and a socket) Micro USB 2.0 Breakout Board Wires :)
Shelf to place below 2 original models
Shelf to place below 4 original models
Habe hier eine Halterung für den Levelsensor entworfen um ein K1 Hotend an den Neptunes zu betreiben. Des weiteren wird für diesen Mod eine CR10 Heatbreake benötigt und ein passender Lüftermod. Ich habe mich für den Windwarden Vulcano…
you will need 2 nails of a small pipes of steel or carbon with diameter of 2mm ( 1.8 is best) to make the hinge.
Recommend sizing it up
I created this remix to store more Hot Wheels in one big shelf. Now it is possible to stack 6 shelf levels
Визитница на 3 уровня Части печатаются по отдельности, затем склеиваются. business card holder for 3 levels The parts are printed individually, then glued together. Plastic PETG Filling in 20
Wasn't able to print the original because it was too tall. Dropped it down to a 4 level.
Explore repeating fractal patterns by comparing the different levels of pyramids. See how stacking the lower levels add up to the higher levels.
A nice drained planter with a medieviel house on the top and a small bridge. You have sizes for 4 different bed sizes, but you can scale it (just take a look at your print preview, that details are not getting into issues): 180mm 250mm…
SET OF 10 DIFFERENT COMPLEXITY TOWER MAZE - 10 levels - each more complex than the previous! Who’s up for a massive challenge? Well here’s one for you - I designed 10 different maze levels, each more complex than the previous one. Will…
