Liczymy pasujące modele…
Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
Nice improvement on my previous low poly cat model. Made in Blender. Commercial Use: https://cults3d.com/:1308071 $1 Donation: https://cults3d.com/:1308029
Low Poly Skull Edit (8/23/2023) Fixed bottom so its flush and flat. Titled right slightly so its more centered as well. G-code and .3mf files updated. (same size now) If you want a smaller skull with organic supports you will have to…
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
A low poly model for 3D-printing of Rodin's Le Poète , The poet in English, and commonly know as The Thinker . Print instructions All three models somewhat complicated prints but the easy to print one uses bridges for the worst overhangs,…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This print-in-place locking bag clip has been designed so that it can be printed without supports , has a fun curvy shape , uses an outward angled handle for easier one-handed use , and is a nice size at just under 6 cm when closed. I'd…
Small whistle for keychain, backpacks and other daily or safety equipment.
The makers of Diablo IV have shared their amazing 3D model with me to make one of my stop motion animations which I have adapted for print and have kindly let me share this beautiful model with the community! I can't wait to see your…
This is a model of the engine block made for the Original Prusa XL Five-Head.
Print instructions The 3mf file has all the basic settings and it should print like this I adjusted the supports so the chin will look good and there is gonna be minimal cleaning
Mathematical Art: The Inverted Oloid Overview This model is a unique take on the Oloid , a three-dimensional curved geometric object discovered by Paul Schatz in 1929. Unlike a standard solid oloid, this inverted oloid features a…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
It's a two-metre version of my low-poly world map, and the biggest printing project I've done so far. It took me a couple of months and about 5kg of filament to print (including some failed prints). It is quite easy to print. Just print…
2.4 : 1 Scale Study Model of a Cylinder Lock I made this illustrative model of a keyed lock to help you understand the function of the door opening and closing mechanism. Video assembly instructions: I've always been fascinated by…
This model's fully articulated at all joints, including along the spine. It sits comfortably on your hand and also likes resting on things. I've uploaded both the standard and NoMagnets.stl/obj files so you can choose to print either the…
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
Halloween Mini Monster Trap >:D Print Recommendation: Material: PLA, PETG Infill: Grid Infill → claw holder (100%), all other parts (20%) Perimeters: 4 Perimeters Supports: No supports → With the exception of the plate! (Support on build…
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
I started with just the angry ghost earrings version. But I wanted to have some more options so I've added those too. If you are missing a variant, please let me know in the comment section! Dimensions (hwd in mm): 24.95 x 25.65 x 1.3…
Sanding block with simple construction. Made to work with a 38mm x 230mm - 240mm sandpaper stripe. After trying out a few sanding blocks, not finding anything fitting my needs. Either they were over-complicated, screws were fiddly, the…
The original file is not mine. I only downloaded this myself. Unfortunately the file doesn't seem to exist anymore. Since I still had the file on my PC and think it's very good, I'll upload it here. The file should be very nice,…
This is a digital 3D printable model of Hornet’s Needle from the Hollow Knight Silksong video game. Designed as a human-sized cosplay prop! 😁 Features 2 versions - smooth and textured. 📦 Included Files STL (cut for 200mm printer beds) STL…
This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is a really simple print. It requires no supports and it is print in place. This print takes about 3 hours to print. This model was designed and sculpted in Blender. It was my first time making something in Blender for 3d printing.
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
My kids wanted mini Minecraft tools. The easy answer would be to print the fantastic models by GSAMakerspace on Thingiverse (10 years ago!), but ~~I have an XL and I wanted them in color~~ my kids demanded diamond variants. My next…
Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.
Easy To Handle Slide Lock Scalable in slicer
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :) Higher Poly by Noah1794:…
A lovely gift from the bottom of your heart. A plant pot fit for Valentine's Day. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
This is a digital 3D printable model of Sir Radzig Kobyla's sword carried by Henry in Kingdom Come. (Fan-made, unofficial, non-commercial artwork.) The download contains pieces of the model ready to be 3D printed on a 200 mm print bed…
Fan Art Clock of Miss Minutes , a character in the television series Loki produced by Marvel Studios . You can use the clock as a wall clock and as a table clock. The clock has a size of about 155 mm x 170 mm x 26.4 mm. The dial has a…
Easy to make a cute Axolotl keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
It's a one-metre version of my low-poly world map ( bigger version (the real images show the two-metre version)) It is quite easy to print. Just print each individual files. Use the last picture, which shows how the parts come together,…
Author: CreativeTools 3DBenchy is a 3D model specifically designed for testing and benchmarking 3D printers. It is a small recognizable object that you can download for free, make and share. Including 4 handles as waste objects.…
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Description: Wanted to create cutout like bats decoration similar to the ones I had as a kid, however not being made out of construction paper. There are 3 different bats that I drew then made into STL's. So the edges aren't perfect,…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…
Box for multiple Samples: Check out here Smart Version with NFC: Check out here This filament samples are designed to show many features as well as having a space for information about the filament Features Thin walls test (3, 2, 1.5,…
Hello, I have a clothes peg for you, food. They work beautifully and only require very little material to make. Ideal for attaching laundry while drying. I used PLA/PETG Basic as the material No need to use supports If you are interested…
Modelo bonito y monisimo para decorar una clinica veterinaria, una casa, o una tienda de mascotas. NECESITA SOPORTES!!! Para un acabado impecable!!! El modelo ha sido generado inicialmente con ia, despues lo he modificado y he limpiado…
Cyclo valve cover for 6 and 8 mm valves I recommend putting a collar around the valves so that they hold well on the printing plate
This is a longsword for Dummy 13. It is about 100x22mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :)…
A fun little flower at a cute size (under 5 cm in diameter) that can be used as a hair accessory by sliding a standard bobby pin into the provided slot. This is a quick and easy print (no supports required), and comes in at under 6 grams…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
If you enjoy my designs, please consider a donation: https://paypal.me/melix3d all profits will go towards my local animal shelter .
The Sock Blocker V2 has a replaceable tip for adjusting the size. It is an improved version of my original Sock Blocker with better guiding rails and a tighter fit. The two versions are NOT compatible. The tip is attached by a snapping…
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Description All printable parts for upgrading your Original Prusa MMU3 for Enclosure instalation. Before you start printing, please read the instructions carefully. Depending on the option selected, you either receive all printed parts…
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
A very fast print - it takes only 10 minutes - and you can make yourself or other HP fan happy! I recommend printing with 0.1 mm layer height. You can print it with any filament, I printed with PLA (mostly Prusament). Check out also my…
Remix of the Bokoblin Chest with slots for 10 Nintendo Switch game cartridges
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Reproduction fidèle de l'emblème du Real Madrid, adaptée pour une Impression multicolore à couches variables (sans MMU) . Paramètres utilisés pour la fabrication du logo mural (gcode fourni) Périmètres 2 Couches solides Dessus : 5 /…
A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes . The STLs for three different sizes of each style are included here for convenient printing. This model is fully…
Dimensions (LxWxH) 70 x 30 x 10 mm (100% scale) Basic information Print in place clothespin. It's designed primarily for laundry, but you can use it for many other various purposes, such as sealing bags, holding stuff together, etc.. The…
Print with z=0.3 PLA or PETG Put in flowers, pencils, sweets or…., love. W
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Weathered Rusty Nuka Cola Bottle Cap Make it into a keychain or a coaster. Good Candidate for Drybrush Technique.
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
F1 logo contoured keyring with raised logo. Simple keyring that can be printed in single or multiple colours. Keyring is approx 2mm thick with a 1mm extruded logo making it light, sturdy and quick to print with minimal filament. For best…
This is a basic redesign of a lock that I saw a couple of years ago. It is fully functioning and works like a real lock. To add, when you open the lock the combination is automatically mixed up and doesn't show the correct code. It can…
Fallout: T51b Power Armor Helmet - Dice Tower Removed Old Files. Hole is now 26+MM wide to accommodate dice better. Also the bottom is flat and should need less support. New files called helmetnewa.*** THANKS w3dn3sd4y for the heads up.!…
Butterfly with flower design Suitable as home decoration, wall art or coaster under your cup Easy to print Model is scalable for your needs Printing informations: No supports Printing very good with any filament 0,15 - 0,2 mm layer height…
Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks
Stay Puff Marshmallow Man.
First Star Wars helmet of mine, modeled in Blender based of Battlefront II character gallery. Cut in three parts for easy printing and assembly with bigger printer (I use Ender 3 Max). For smaller printer additional cuts have to be made.…
A puzzle box in the shape of a brick block. Printing All parts can be printed without supports, however Level 4 includes some long bridging that must not droop for good functionality. This project includes a version of this object with…
I saw the super cool print in place box by DrJones and i wanted to try to make it so only I can open it. Print it with low filament flow so the parts dont get stuck together. (All redy set to low flow in the g.code) All box sizes are the…
Easy to print catch-all tray, prefect for keeping track of your stuff or organizing screws! No need for any support and can also be scaled bigger or smaller right in Prusaslicer! Thanks for checking it out!
Easy to print, tought and compact construction. Need a little of support (just for hook - don't use support for holes). (it's the same as https://www.thingiverse.com/thing:3371739 ) Category: Construction Toys
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
It's a pastry cutter. It's very simple. Height is 4.9 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Features : smooth layerlines along direction of insertion = STRONG and SMOOTH . Designed specifically with NO SUPPORTS , NO crazy overhangs. The “roof” of mag body is chamfered and recessed; meaning bad bridging performance does not…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This model set includes three 3D-printable nut inserts designed for 40×40 T-slot aluminum extrusion profiles . Each insert provides a clean, reliable way to mount M3, M4, or M5 nuts…
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
🎬 Preview Images: The preview renders showcase the clean low-poly geometry of the animal figures and demonstrate how the models look both as standalone sculptures and in realistic environments . They highlight the minimalist design,…
Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…
Zum deutschen Originaltext gehts nach unten! -------------------------------------------------------- Push your MMU3 on the next level! You have an original Prusa MMU3? THIS is your musthave! Do you have an MMU but you are annoyed by the…
Object Description: It comes too late for the prusa design contest end of 2021, but here's my version of a bag clip. Advantages: - Stable hinges - Wobble-free hinge design - Easy to close - It clamps reliably even thin bags - Marble…
Description Kid request… This is just a decorative plaque featuring the Pokemon logo. I have included 2 gcodes. The first is a 1 color print. The second is a 2 color print that does not require an MMU, only a color change. STL also…
Blood Type Keychain with NFC Tag (v2) This is a remix of my blood type keychain (see here ). The design has been completely reworked and is now in the shape of a blood drop . The keychain has a size of about 30 mm x 42 mm x 3.6 mm. The…
This model comes in two versions. One with eyes and one with eye cutouts. You can use the printable eyes to make them a different color or use flatback beads or other items. This print requires no support or brim. The model can be printed…
Wall art vase with flowers
I made the Nintendo 64 logo on SolidWorks. Settings: 10% infill No support Brim ON Instagram : @roiku3d
Wall Art - Flower Rabbit Easter
I designed these earrings as a tribute to the movie Scream. I created 2 different sizes and one with the black hood and another which is a plain version. If you enjoy my designs, please consider a donation: https://paypal.me/melix3d all…
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
