Liczymy pasujące modele…
Einfach über die Lupe stülpen und es gibt keinen Staub auf der Linse. Kann mit Deckel auch zum sicheren Transport verwendet werden. Filament: Case PLA Deckel: TPU
A very helpful tool to make a lot of pom-poms. It is no longer necessary to make them with cardboard, you only could use once. I've uploaded all parts as a single file and one file with all part. All parts can be printed without supports.…
It is a remix of Phatcros' beatiful design. I have remixed it to make it shorter to fit my clipper lighters just how I wanted. This remix is for Clipper Lighters that are 50-51 mms long without the metal cover.
Hi, It's my air funnel for 30mm and 25mm fan.
A very helpful tool to make a lot of bobbles. It is no longer necessary to make them with cardboard, you only could use once. I've uploaded all parts as a single file and one file with all part. This bobble maker is a little bit bigger…
bracelet maker i made. 16 and 32 strings versions. this is basically a string holder for braclets from braceletbook.com "Bändelimacher" is swissgerman for "bracelet maker" :)
Exercise for 3d Modeling, never printed
Figure of Michael Schumacher in 1:43 scale. Suitable for 1:43 F1 car models and dioramas.
fiat stilo schumacher side skirt clip 71739946
If you run on carpet some tracks require front & rear shock tower protectors. This is to fit on the rear of the CAT PB and attaches with a small cable tie.
Der Uhrmacher - Magnet - Ring Durchmesser 21,5 mm ist zur aufname eines Magneten D12 x 2,4mm erstellt. Der fertig montierte Ring ist dazu gedacht beim zerlegen und montieren kleiner Geräte z.B. Uhren, Laptops, Elektrischer Eisenbahn,…
Replacement Schumacher Quick Clips as used on their 1/10th buggies. Both 1mm and 2mm versions. Printed a few and fit fine, not tested long enough to test durability. I printed in PETG. Due to their small size, the first layer needs to be…
A simple housing that is clamped onto the top-hat rail suitable for Rademacher actuators. printed without supports ind PETG
Schumacher LD3 Fan Mount for 30 x 10 Fan Add a 40 x10 Fan Features: Flexible Mounting: Secure the mount with or without double-sided adhesive tape. 3D Printing Recommendations: For optimal results, we recommend the following settings:…
Realistic wheels for Schumacher's Brick Ferrari F2004. The stock wheels are not realistic, so I checked the tyre rules from 2004, and made everything as detailed as possible with a 0,4 nozzle. The rear wheels are a bit wider, the grooves…
40mm fan mount I designed for my Schumacher Storm truck, it will fit in a LD1 and LD2 however I have dont have one so cant test if it clears the shell or not! It can also be mounted infront of the motor too, as long as the batter is far…
Feuere Deutschland an, für den WM Sieg! Egal ob zuhause, beim public viewing, oder im Stadion, alle werden dich hören können! Have fun building the project! Stay creative!
Toe Insert case for the recent Schumacher cars such as Laydown, LD2, Storm truck. Print both and clip together, has a little clip to keep it closed. Small updates from user feedback: Pegs that hold the inserts are a little shorter so…
I recent got some Low Profile batteries and obviously they are quite a bit thinner. I had designed a oring mount in the summer for my standard size however it didnt work with the low profile batteries. I designed this mount. Uses all…
Oring mount for the Schumacher Cougar Classic. Uses the original mounting points, the holes are self tapping, I assume the kit wood screws will be fine but I had already replaced with M3 10mm bolts. You will need a 2mm oring, anywhere…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA BambuLab Basic Red PLA+ Sunlu Skin PLA+ Sunlu White This print uses 4 unique filaments Swap…
Fan Mount for 1/12 Schumacher Eclipse 6 This fan mount is designed to attach to the pod rear brace of the 1/12 Schumacher Eclipse 6 and provides additional motor cooling. It is a simple, compact solution using standard hardware and a…
This is a simple gear protector protect any stray wires from the spur gear. It sits over/on the stock top plate (U9284) and can be attached with 2 small cable ties. This is for the MOD car which uses the slipper or the lock out. This will…
I recently got low profile batteries and the battery mount I designed didnt work as they were a lot thinner. So I designed this. You will need 2x 44mm diameter oring's, check on eBay. Either 2mm or 3mm. I'm currently using 2mm. Print…
Bumper for use in 1:10 Touring Car model Mi5 or Mi5evo made by Schumacher RC Racing. To be printed in 1.75mm TPU (95A), no top or bottom layers, 4 vertical shells, 12% honeycomb infill, and 200% infill extrusion width in PrusaSlicer.
Ein Uhrmacher Schraubendreher Halter zum aufschrauben auf eine Platte oder mit dem Sockel ,die 2te Variante . Die eine Dateivariante habe ich nach den größen bei mir schon beschriftet , ansonsten nach eigenem Bedürfniss Neu beschriften!!!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 162.37x200mm in size You may print at higher layer heights below the Min Depth of 1mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
Gestell um Bommeln herzustellen layer : 01 support: no infill: 50% Frame for making pompons layer: 01 support: no infill
Rademacher DuoFern 9491 remote control holder Category: Organization
Fuddled my way through Fusion 360 to make a keyed rotary switch for my Schumacher Battery Charger. This also fits my crockpot, so it might fit a bunch of things. I printed mine with fuzzy mode, and didn't remove the support in the arrow,…
Von einem Fan, für Fans von Michael Schumacher. Wandbild einteilig mit Bohrung für Wandbefestigung. Ohne MMU druckbar aus einem Teil, durch verschiedene Ebenen mit Farbwechsel. verwendete Filamente PLA weiss PLA schwarz PLA Silk…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 128x170mm in size PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start…
In the kit you get 1mm spacers to use one at a time but theres an option part for 0.5mm (U8207) rather than buy the alloy option part, I created it in Fusion. Fitted and works fine. Print Settings Printer Brand: Creality Printer: Ender 3…
Jung AS581WW_Rademacher_Rahmen
Leider habe ich noch keinen Smart-Home Gurtwickler für Rollläden gefunden, der Matter-kompatibel ist. Meine Lösung daher: SwitchBot Bots mittels einer Montageplatte am Gurtwickler montieren.
I didnt like the mounting system on the LD2, they would wreck the stickers on my batteries and you would need to adjust/reshim if I used a slightly different battery or a brass weight. I designed this to work with a rubber oring that…
Motor cooling fan for a Schumacher KC. Only tested on Motor Position 4, but should work on other motor positions too, assuming theres space under the shell. Theres two versions, one for a 25mm fan and another for a 30mm fan. Requires some…
A Michael Schumacher keychain, in memory of his glorious days with the Ferrari team.
A diff seal for the ball diff in the Schumacher KC. I found that in the summer a lot of dirt/sand/dust was getting inside the diff and causing less than normal operating times, so designed a simple seal to stop this. It comes in two…
You know that thing on the back of the Schumacher Instant Power jump starters that holds the air hose and constantly get lost and fall out? This is that thing. The part is slightly wider than the original so it fits more snugly in the…
Wandhalterung für die Fernbedienung von Rademacher.
Rademacher 9478 suction cup was broken, so I design a new one. With this print and 2 suction cup (like this: https://www.amazon.de/gp/product/B07J3QPYTM/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 ) the sun sensor can be used again.…
LiPo Stop/Holder for a Schumacher KC/K2. I made this because when I recently got a KC and you only get 2 of them with the kit but when if the battery is in the middle position you need 4. Nothing special but functional. Print Settings…
Michael Schumacher — Bust This bust pays tribute to Michael Schumacher , the German racing driver born on January 3, 1969, in Hürth, widely regarded as one of the greatest champions in Formula 1 history. Nicknamed "The Red Baron," Michael…
System for securing a 2S Shorty Lipo in a Schumacher Mi5evo RC car. Needs 4x M3 heat threaded inserts, one each for the forward and rear retainers and one each for the forward and rear posts. You need to use fairly short M3 bolts to…
Rückseite für das Badge vom ZTL “Macherdaach”, damit man sich nicht an den Lötstellen ritzen kann, die Kleidung sich nicht daran verheddert und es gerade auf dem Tisch liegt wenn man Pong spielen möchte. Support wird je nach Drucker für…
This is a simple fan mount that a fan can be taped of glued to and then screwed down to the chassis. Uses existing holes in the L1R chassis (may also exist in the L1 and Evo chassis, not sure). Category: R/C Vehicles
Setup Tray 1/12 Schumacher Eclipse Setup system for 1:12 pan cars – specifically for the Schumacher Eclipse 6 – with customized space for: – 1× Yutori oil – 2× Core-RC silicone oils – 1× Core-RC grease – 1× metric bearing gauge – 1×…
Eine Säge und ein Maulschlüssel mit Text für das Macher Festival 2025. Kann sehr einfach für 2026 geupdatet werden. Zum Zeitpunkt der veröffentlichung sind aber noch nicht alle Festival Partner final dabei.
úprava držiaka na batériu pre Schumacher Mi5. Pre použitie je potrebné mať setup s MID motor uložením. OEM čísla dielov pre MID motor: U4324 - C/F Mid Motor Topdecks - Mi5 U4323 - Bando Belt 103T - Mi5 mid motor/KF low grip rear U4322 -…
Artwork of Michael Schumacher in Ferrari. Decorative piece for Formula 1 fans.
Designed and printed a plaque to commemorate attending my first Wanenmacher show this year. I attached the plaques using #16 chain and eyes (recommend drilling out the provided pilot holes). The back of the plaque includes keyways to hang…
This is a community project and was designed by me with a lot of feedback from the community. Thanks to all the testers, helpers, and everyone who printed the finished model. More about the Macher Festival: macherfestival.io
Das gerät ist zum loch machen für Gemüse pflanzen
Halter zur klebe oder Nagel montage am Fensterrahmen.
Description This is a simple and easyprintable, low-profile wall mount designed specifically for the IKEA Radermachera in the 14 cm pot. The mount allows you to display your Radermachera directly on the wall, saving space on shelves,…
This is a simple gear protector protect any stray wires from the spur gear. It sits over/on the stock top plate (U9284) and can be attached with 2 small cable ties. This is for the MOD car which uses the slipper or the lock out. This will…
If you run on carpet some tracks require front & rear shock tower protectors. This is to fit on the rear of the CAT PB and attaches with a small cable tie.
Oring mount for the Schumacher Cougar Classic. Uses the original mounting points, the holes are self tapping, I assume the kit wood screws will be fine but I had already replaced with M3 10mm bolts. You will need a 2mm oring, anywhere…
