Liczymy pasujące modele…
A mount that can hold 360 to 120mm radiators or fans. I needed a mount that could support a 240mm radiator for my GPU and could only find models for 360mm. For 360mm radiators just screw in place and then slide onto the poles of the case.…
I created this bracket to allow for a large gpu to be installed horizontally. Mounting wholes are sized to use fan screws to attach to the P3's frame.
I did not like the orignal hdd cage of this case. Also it offered only place for three 3.5" hard drives and it was hard to access the drives. As I am using this case as a server, I wanted quick access and place for 4x 3.5" harddrives. In…
Installation and assembly depicted in the above video. Thermaltake Core P3 TG Pro only comes with a single fan mounting bracket. I used mine on the side of the case and wanted to limit the amount of dust coming into the case from the top.…
🇲🇹 Merħba Malta! Welcome to Malta! This stunning model full of detail was created by Dany Sánchez , available in the following versions: Complete Split in 2 parts, for faster printing, or print at larger scales The Cittadella , also known…
Se recomienda utilizar soportes, la altura de capa puede ser 0.28 sin problemas ya que es un accesorio para utilizar al sumergir la pieza de cerámica en el esmaltado y evitar marcarla con los dedos.
This was designed specifically for the Thermaltake Tower 300 Computer case to stop your fingers and cables from getting caught in the fan blades when taking the top panel off. This can also be used for the optional rear fans connected to…
I made this model in order to keep using my old case, the Thermaltake Versa H17, but with my new processor that produced much more heat (i5-12500). However, the stock H17 is not a very good case in terms of airflow, and there are…
This is my latest version of my radiator bracket for Thermaltake Core series chassis. This one should allow you to mount a 360mm X-flow radiator between two posts of your Thermaltake Core P3. It should work on any side of the case you…
Thermaltake Core P3 5.25 Vertical Drive Bay Print Settings Print with the bottom side on the build plate (for orientation see P3 Dual Drive Bay.3mf). Needs lots of supports
Thermaltake Core P3 120mm Fan Mounts. Use rubber foot screws to secure.
Thermaltake Core P3 PSU Cable Cover
Replacement snap-in feet for the Thermaltake Core V21 PC case. The original ones just snap off when you try and move your case without lifting it up. I created these to replace them as I couldn't find any existing replacement designs and…
This bracket for the Thermaltake Core P3 with the curved or flat glass side panel allows an additional three 140mm or 120mm fans to be mounted or any 120mm, 240mm, or 360mm radiator at the top or front of the case. The only other parts…
Se recomienda utilizar soportes, la altura de capa puede ser 0.28 sin problemas ya que es un accesorio para utilizar al
Printed without supports, 20% infill, 0.12 layer height. Original feet have a little rubber/felt pad glued on the bottom, transfer it across or replace it with a new one of a similar height or things won't be level.
This is a remix for mounting EK-Quantum Kinetic TBE D5 pump/res combo units. It has been shortened to allow the fittings to exit the rear along with relocated mounting holes for the standard bracket. I also thickened the vertical mounting…
Mounting bracket/arm for fans or radiators for the Thermaltake Core P3 chassis. There are 2 versions depending if you are mounting a 120mm or 140mm type of fan or radiator: 360mm mount (slimmer) (For 120mm Fans or 120/240/360mm Radiators)…
I recently built a new PC in a Thermaltake Core P5 case. As you can see in the pics on the website and my ‘before’ photo, you can see the power cabling easily. I have the case mounted to the wall behind and above my monitor, so this…
This pair of brackets will allow you to suspend a U-flow 480mm radiator between two of the window-mounting corner posts on your Thermaltake Core P5 chassis. They should allow you to place your rad on the top, either side, or even the…
An 8 bay 3.5 inch HDD enclosure designed around the Jonsbo N3 backplane which can be purchased separately for ~€15. I have also Included a mounting piece for the Thermaltake CoreV21. The main assembly is fastened to the mounting plate…
While this is registered a s a remix, it is actually a completely new set of models with STEP files included. There are two versions. The threaded version is designed for use with standard g 1/4 fittings for water cooling. The three small…
Updated to have better socket retention and more solid clip engagement. This is an ATX 24 pin bulkhead pass through for the Thermaltake Tower 900 case. For securing ATX 24 extension cables. The rubber grommets from the Tower 900 case can…
This is a grommet insert giving you a bulkhead that will accept two 8-pin ATX power connectors. Either EPS/CPU or PCIe are compatible. This secures the cable and gives it a very clean look. The design allows you to run extensions from…
This is a cover for drive bays on a Thermaltake Armor computer case. I designed it specifically for this case (which is rather old now), but I'd be willing to bet it works with other cases too. It might take some slight x/y adjustments in…
Headset hanger for Core series cases with the glass or Plexi. I used supports and you can print at whatever resolution you want.
This thing must be printed twice. It's symmetrical and must be used in a pair. It should allow you to mount a 420mm radiator to your Thermaltake Core P5, by "bridging" it between two of the corner posts.
Note: I specially designed this to lock in place using old springs that you've likely got lying around from replacing weak print-bed springs, or the spring near your extruder knob. Smaller springs can be used (I'm using a combination of…
🇲🇹 MALTA 🇲🇹 If you are Maltese, a vexillologist (look it up!), have international friends, or simply don't know what to do with your color filaments, this Flag Coasters collection is for you! This is not the actual flag of Malta, but the…
I made these to cover some gaps I am not using.
A simple adapter for an Aquacomputer D5 NEXT pump on the mounts of the Thermaltake 900 Tower. I use them with two layers
I designed this after breaking my original headphone holder and I decided i was tired of the usb cables just laying around after i unhooked my headphones, so i added a little hanger for the wire as well.
I've had a Core P3 for a while and have been pretty unhappy with the GPU riser situation. The included 8-slot bracket causes you to either have a modern (ginormous) GPU right against the case glass where it can't breathe, or further back…
Cover for Thermaltake Armor (old case) 5,25 slot. Hope, it will fit (dont have a 3d printer yet to test it :-)
Data source: eu_dem_v11_E40N10 Copernicus Used qGIS and DEMto3D plugin vertical exegeration at x10
Compatible with any EK-D5 pump that has 34x65 mm mount. https://www.ekwb.com/shop/ek-revo-d5-pump-mount
I wanted to use only 1 fan for my mATX server build to be as quiet as possible. Therefore I wanted to mount the original 200mm fan above the motherboard in addition with the Alpine AM4 Passive cooler (…
For this model you will need an assorted set of M3 bolts, nuts and a few washers (or you can print spacers but I didn't). The pics are quite dusty but that's just proof that it works. Printed: 1x Grill_Frame_All 2x Mesh_Grips_Sides 1x…
This is a quick mount I designed to mount the pump / resevoir of the EKWB fluid gaming set more to the top in my Thermaltake Core P5 case. The Mount uses only hardware that is included with the fluid gaming set and is pused into a hole in…
This is for the Thermaltake Core V21 as a customizable badge for the front panel. I created a Noctua for example but this base is good for you to put anything on. It takes a 10x1 mm magnet in the whole in the back to stick to the case.…
Przedni panel do obudowy thermaltake core p6 w kształcie plastra miodu dla maksymalnego przewiewu. Drukowane w jakości low na standardowych ustawieniach drukarki creality ender 5. Wybór jakości dla tego kształtu nie ma znaczenia. Trzy…
Remixed from mikebin41 https://www.thingiverse.com/thing:2188329 Changed up the dimensions to better fit larger headphones and added a hanger to reduce the need for a screw or double sided tape.
This is a remix of the Thermaltake Core P5 X-Flow 480mm Radiator Bracket by VanGoghComplex. https://www.thingiverse.com/thing:3319813 I made it 10mm wider to fit my Black Ice X Flow Radiator. I also modified it so you can print it flat…
I wanted to use this power supply for a desktop power supply and i only needed the 24 pin so I made a cover with vents.
This leg for the Thermaltake Core Case P3 (https://www.thermaltake.com/products/chassis.html?cat=190) has a cutout for the power supply. Remixed From https://3dmakers.thermaltake.com/dwgallery.aspx?s=170
Mini ITX THERMALTAKE Core V1 Top cover of the tower with a 120mm noctua fan NF-A12x15 PWM
If your GPU is heavier, the Frame is hanging down. This Print solve the Problem.
Hey this is a first revision of a fan bracket for my Thermaltake Core P3 open air case. It does not have mounting holes yet. I just drilled with the appropriate size drills for the fasteners I used. There is a version of the case that…
A plate to cover the PSU box in Thermaltake core P6 tower, multicolor plate and logo.
Remodeled Headphone Hanger for glass side on Thermaltake View 71 to be in one piece, as it printed in 2 separate pieces form the original model. (At least with Prusa Slicer) Fits my Steelseries Arctic V2 Print instructions I used: PLA…
SSD Cover for you thermaltake pc case to hide the ssd in a nice little cover. First self made 3d item, so be nice to me please :) Print instructions Category: 3D Printing
Enhanced plate design for larger GPU compatibility, ensuring seamless installation while preserving the case's aesthetic
Usb c support for pc case for (thermaltake core p3) Cable usbc : aliexpress.com/item/1005003141440210.html?spm=a2g0o.order_list.order_list_main.20.10785e5bOV2uN6&gatewayAdapt=glo2fra Just screw the cable with 2 M3 10mm screws in the…
My computer desk is not level, so my computer was being held level by a couple chunks of cardboard. Not the prettiest thing in the world. I designed these so that I could level my computer on my desk. Added bonus, I now have enough space…
A simple controller mount designed for the Thermaltake Core series of cases. It was designed specifically for an X-Box One controller, but was also tested with a PS5 controller and works. Printed with Creality Hyper PLA on an Ender-3 V3…
I needed a power supply shroud to cover up the cabling and PSU in my Thermaltake Core W200 case(right side) so I made this. It's got the AMD and Ryzen logos in it for my build. I uploaded them separately so you can choose to add them or…
I had a couple of feet break on my Thermaltake Core V21 computer case and moved at the same time. Figured why not print feet with additional space between the floor and bottom of the case. Originally, I had just used the same connection…
This is a SSD slot cover for the Thermaltake Core P3. This model covers all the ugly cables and adds a way to customize your case. The 2 parts are printed separately and can be put together. There is no glue needed.
A simple shortened case foot design to let the Thermaltake V21 fit inside an Ikea Kallax or Expedit shelving unit. There is enough room left to put adhesive felt furniture pads on the case feet to reduce vibration and prevent scratching.…
On each end there is space for double sided tape to hold it in position Print instructions Category: Computer Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No
headphone Hanger to work from glass side of View 71 Print instructions use Supports
This holder mounts a set of headphones to the glass of the Corsair P1, P3, P5, P8, and P90 (https://www.thermaltake.com/products/chassis.html?cat=190) computer cases. I modified the original clamp from 5mm to 6mm and extended the hook to…
For mounting the breakout box for my HTC Vive Pro inside of a Thermaltake Core Case P3 computer case (https://www.thermaltake.com/products/chassis.html?cat=190). Print Settings No supports needed if printed with the front or back on the…
Size model = 260*111*18mm Infill = 10% Supports = No Pteg = 245c
This is a replacement panel for the Thermaltake T600 tower pc case. The case comes with a second panel to use with the Thermaltake LCD, but that screen is much smaller. This bezel is designed to match the clips and protrusions on the pc…
Allow the included brackets to be attached to a 120mm fan. The bracket is held in place with standard computer fan screw and the original bracket is screwed in M3x3 brass inserts. I inserted the brass inserts from the back of the brackets…
For mounting the breakout box for my HTC Vive Pro inside of a Thermaltake Core Case P3 computer case (https://www.thermaltake.com/products/chassis.html?cat=190). Update - I've created a 2.0 version. The new version has a circular cut out…
Simple mount for Primochill CTR Reservoir w/ D5 Motor into the Thermal Take Tower 900 Holes are for M5 Grub screws, if your tolerances are good you only need one! Mounts to the frontmost reservoir plates in the case using M5 screws, you…
This holder mounts a set of headphones to the glass of the Corsair P1, P3, P5, P8, and P90 (https://www.thermaltake.com/products/chassis.html?cat=190) computer cases. I modified the original clamp from 5mm to 6mm.
Replica of the original power/reset button for Thermaltake the tower 300 PC case. It's useful as replace or if you want to change the buttons colors. Copia dei bottoni originali avvio/reset del case Thermaltake the tower 300. Utilizzabile…
3d models of the Hercules Class Titan, Zeus Class Titan, and Kronos Class Titan from the MMORPG City of Heroes. Each model was made it a combination of character model screenshots, ChatGPT, Bambu's image to 3d, and many hours of fixing up…
This is a shim too mount Ultitube D-5 pumps on the Thermaltake Tower 900 Pump mount.
PETG or ABS Layer 0.16mm Infill 15% Supports ON
I was missing the lid for my Thermaltake Tower 100 Case so I made my own. I later split it into 4 parts to fit on my printer. Can be easily superglued together.
USB Hard disk slot mount for the Thermaltake Core P3 case. Likely also compatible with the Core P1 and Core P5 cases. The mount holds the drive at a 27 degree angle to allow space for the USB3 cable when multiple mounts are stacked. Print…
This is a 2 part replacement foot for the Thermaltake V1 ITX case. The inner part (nut) carries an M3 nut. The fit here is snug, so you may need to press it in. The hole through the foot is sized so an M3x8 bolt will not protrude past the…
The bottom part is bored out, allowing felt furniture feet to be adhered to it.
You can print it either way, flat side or the other way around. Supports are needed for both options. See pictures Printed in PLA with following Settings: 2 walls 5 Top layers 5 Bottom layers 20% infill 0,2mm layer height normal supports
oscad included
Cover up that gaping hole in the basement of your Thermaltake S100 and S100 TG case with this easy to print cover/shroud. No supports required. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200…
A spacer plate modelled off the bottom of this model: https://www.printables.com/model/204631-thermaltake-the-tower-900-pump-mount-adapter-for-e for of you're wanting to raise your pump/res up. I have included the .step for easy…
This is a mount to fit your EKWB DCC pump onto a Thermaltake core P3 case stock water bracket. This goes between the pump and the stock case bracket to mount securely and look good. This uses the stock EKWB DCC pump screws and a set of…
EDIT : The air flow guide was about 1mm too tall which caused a slight bowing on the top grid. I modified the STL so it is all good now. The Thermaltake Tower 100 is a great case, but hot air tends to accumulate in the top part of the…
Thermaltake Core X71 Case Front Cover - Cover for the front drive bays Summary: Needed a quick and dirty way to cover the front of this case. Able to match the pattern pretty well. I don't have to look at it all the time so works for me.…
Extended GPU holder for Thermaltake Core G3 case. Useful if your GPU power cables interfere with the normal holder placement. Use pads from the original holder (just peel them off and stick them to this) Needs supports This object was…
No idea what the model for this hard drive cage is. I tried to replicate it best i could. However, this results in some printing issues, if i find the time i might revise the model later. The retention nubs are slightly too short.
I was missing 5.25 inch cover for my Thermaltake Versa H22 PC case so I prepare one. Printed with 0.2mm nozzle and 0.1mm layer in standing orientation with PLA it fits perfectly. I include freecad source file in case you need to modify…
Simple 5.25inch bay cover for this computer case.
I designed this case riser for my Thermaltake TR100 to improve cooling and also direct the air out on a specific side. I felt there was a lot of “stagnant” hot air below the case which often was blew towards my keyboard and it didn't feel…
Simple 3.5inch bay cover for this computer case.
This is a blank cover to modify to your needs Category: Computer
This is a headphone holder for the Thermaltake Core series cases. It's a 2-part model, designed to not need supports: Main headphone hanger - slides over one of the posts that holds the glass in place; designed for the lower right post…
Thermaltake Core V21 legs to raise the PC vertical. The legs just press onto the thumb screws. Inspired by JColasante's design on Pinshape and a bit of a remix of @BaGooN design.
This is a adapter for 3.5" Floppy Drive sized devices to be used with Thermaltake cases. Instructions Print it out and use it Category: Computer
This will hold your 18-24 inch gamalta aquarium light at an angle 7 inches from the base. This should fit other aquarium lights too if they are less than 17mm thick. I would recommend your walls to be .18 mm thick at least (three walls…
This is a variation of the SSD mount from Thermaltake for the Tower 100. Replaces the OEM SSD bracket. I designed it to better conceal the SSDs, as the OEM bracket faces them upwards, side-by-side, where there is plenty of room for them…
I want start out by saying this thing is large. It is 585 mm long so you’re going to need a printer capable of that size but you can cut off about 60 mm off each side if you have a printer that’s only capable of 500 mm This is made for…
Riser blocks to suit a Thermaltake ATX Versa H24 Computer Case however it may fit other cases with similar feet spacing. (Dimensions shown in Pics). I wanted to provide additional gap to the bottom of the PC to minimise dust /maximise…
Made in fusion 360. Printed with Black PTEG but the tops and bottoms didn't turn out too well. Used with 2mm screws and Lian Li PCIE 3.0 riser (repurposed q58 one)
Thermaltake Core V21 side SSD blank with a cut-out to hold an argb strip I made this as I had no use for SSD holders but wanted a blank to hide wires but also hold my argb light strip.
