Liczymy pasujące modele…
This marmot figurine features the round body, short limbs, and curious face typical of this alpine creature. It’s great for natural dioramas, educational use, or just as a cute collectible! Printing : Works with FDM and resin printers…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
There are 2 parts to mount the DJI O3 Air Unit (O3 Mount Bottom & O3 Mount Top). Those are stacked on each other with the Air Unit in between (like a sandwich :D). The cables to connect the Air Unit to the flight controller are laying…
Also works for the original DJI FPV System camera using the standard 2 mounting holes on each side. Front holes are for mounting O3 Cam, they'll push it all the way to the front, almost touching the titanium cage but getting 99.99% of it…
Ah, nice marmot! The Marmot is a bathtub-chassis, rear wheel driven, vintage-looking buggy with special features such as rack and pinion steering and funny rear suspension. Printing should be fairly straightforward, but some parts will…
I recommend removing antenna tube to keep some flex in the mount. Cap should be held in tightly enough using friction not to pop out and pull the cables out (thanks SyncFPV for help with this design), but I haven't been using it too long…
I made 2 mounts, one for GoPro Session 5 and and one for GoPro Hero 8, for my Armattan Marmotte ( https://rotorbuilds.com/build/26420 ) - they should also fit for the Armattan Badger. Further I made a remix of the great "Armattan…
A-arm type rear suspension for The Marmot - https://www.printables.com/model/1149568-the-marmot-110-scale-off-road-buggy Instead of the swing axle type suspension included in The Marmot, this type uses the same a-arms as the front of the…
Low-poly, simple model of a groundhog (Marmota monax). I printed in white PLA and spray painted gold in the picture. This tutorial taught me how to make it.
Pulled out the antenna and fold it for better storage. Use 2 zip ties through the hole (1mm) and secure the tbs crossfire antenna
Was tired of waiting on my mini camera so remixed this design as im sure alot of you maybe in the same boat or already have a micro camera. The Armattan Marmotte only really works with a mini camera which I've figured out isnt too easy to…
Fits both TBS Glass ND Filters and Camera Butter Black Diamond Universal ND Filters (you slide them in from inside before installing the camera itself). Has holes on the back to quickly peek at settings/recording status without taking the…
Mounts a BN-880 GPS ontop of the camera cage of an Armattan Marmotte & Badger. Category: R/C Vehicles
This deluxe dice box is drawn completely from scratch using FreeCAD (though heavily inspired by my remix of one of my favorite dice boxes ). I made this one completely from scratch and sized to fit just about any normal pencil or pen in…
Landing feet has a 10mm clearance from the ground.
Arm Guard Skids Combo for the Armattan Mamotte and Badger Frame. Printed with TPU. Category: R/C Vehicles
This is the final version of my making. it grabs onto the frame, so it is pretty sturdy PLZ Print as it with support is for maximum strength.
INFO: A mount for a gopro session and TBS ND filters for the marmotte frame. My design goals: +No loose parts. +No straps. +Secure camera and filter. This resulted in the back-loaded design. First pop in your filter, then the camera.…
Vertical Go Pro mount for hero 9, 10, & 11. Mounts to Armattan Badger / Marmotte frames Print at 100% infill in TPU. Removed standard GoPro mounting points and fitted with ones compatable with the quad frame.
Simple holder of Crossfire Immortal antenna for Armattan Marmotte frame. Print instructions Category: R/C Vehicles Summary Simple holder of Crossfire Immortal antenna for Armattan Marmotte frame.
Because I couldn't find one, I created my own. The additional hole, is meant to be used for the cables coming from the FC, 5V regulator or anything else. Print it with TPU and with the right site on the plate.
I wanted to mount my GPS module a bit behind the carbon and other electronics so I designed this to be an easy print - oriented like it is in STL it needs very minimal supports. 3MF for the Prusa Mini included is exactly how I printed…
New Parts for the DJI conversion of my trusty Armattan Marmotte. All TPU Category: R/C Vehicles
2019-03-22 : Special thanks to Vaughn Dickson for trying this protectors with the Armattan Marmotte. Not much to say, the same proved protector updated for the newer version of the Armattan frame. OG Chameleon:…
Groundhog (Marmota) figurine multicolor (3MF) and single color (STL). Multicolor version prints in 40 hrs aprox. Requires 5 colors: brown, peach, black, red and white. Single color print is around 6hrs. 3D printing settings FDM printer…
I remixed this from two designs on Thingiverse. It combines the side by side antenna design of Onderko123 and the Immortal T Mount from Swivaljaw's design. **I have added two more design variations on this mount. The swiss cheese one is…
Just a small mount for an Armattan Marmotte (and possibly Badger) for when using a stubby antenna to move it out from the aluminium standoffs for better signal. While there are no holes for it, a TBS style SMA connector fits well or a…
To use with armattan frames.. Armattan Badger include 3in1 (gps 18x18/ sma/ T antenna). Print in tpu 20-30 %
Since I couldn't find a 3D model of an Alpine marmot online, I generated an AI picture of one, converted it using a 2D-to-3D generator, and then made some modifications. I cut out a section of the mountain and placed the marmot there—I…
Deutsch Schönes Geschenk zur Marmorhochzeit oder zum Geburtstag. In das Loch passt wie auf dem Bild ein Reagenzglas, in das man Blumen rein stecken kann oder man steckt einen gerollten Geldschein rein. Seid kreativ! Loch Größe 14,2mm 25…
Required Materials 2 x 2.5mm Nylon Cable Ties
The mount press fits between the rear aluminum standoffs to hold it in place. Required Materials 2 x M3x4mm Button Head Screws
You can mount your M8Q GPS with this mount to your Marmotte quad! Print instructions Printed with TPU.
My GoPro Hero9 / Hero 9 Mount for the Armattan Marmotte or Badger. Let me know what you think. This ist the full protection version. I've uploaded also a light version. Category: R/C Vehicles
BattleMarmot (my wife) really loved the original dice box this is based on , but wanted something big enough to have a mechanical pencil, a spot for her mini (or two), and separate slots for multiple sets of dice. So…here we are! Most of…
Hi there! As i tried mounting the Caddx Vista-camera (identical to the one from the original DJI HD combo), i realized i would need to have some kind of spacers. Also i wasn't too fond of the little arms to hold the camera. Couldn't find…
My light version of the GoPro Hero9 / Hero 9 Mount for the Armattan Marmotte or Badger. Works for me. Let me know what you think. I've uploaded also a full protection version. Category: R/C Vehicles
Schmuck-Halskettenständer / Kopfloser athletischer Torso auf einem Marmorsockel Diese 3D-gedruckte Büste ist eine stilvolle und moderne Präsentationslösung für Schmuck—insbesondere für Halsketten. Ihr minimalistisches Design stellt die…
Improved by adding curve features to better fit the end of the motor arm and allow for more secure attachment with cable tie. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2 Rafts: No Supports: No Resolution: 0.3…
I made a remix of the awesome "Armattan Marmotte/Badger DJI FPV antenna mount" to make it fit to my TBS M8.2 which is just a little bit larger than the TBS M8 version. Link to the original antenna mount:…
The mount has a thickness of 1.6mm sitting on the frame.
Arm protection for Armattan Badger/Marmotte frames with slot that fits a "mateksys 2812 led strip slim". Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Category: R/C Vehicles
This is a camera plate replacement for Armattan Marmotte/Badger. Even with the provided foampad I scratched my GoPro Hero7 battery cover on hard crashes or landings. So this puts little space between the bolts and it also puts the strap…
Designed this tip as a replacement for the aluminum tip in the tent poles which anchors the internal shock cord in the tent pole assemblies. The Marmot tips are threaded, but I didn't find that necessary to duplicate since A) I didn't…
I wasn't happy with the GoPro style holders for the Insta360 Go2, so I mixed together the official GoPro mount with one I was already using for the 2Fiddy. Category: R/C Vehicles
Made some Parts for my Armattan Marmotte Frame. Needed an Adapter for the GoPro7
Rear electronics equipment bay (EE-Bay) mount for the Armattan Marmotte 5" quad-copter frame. Designed for FrSky R-XSR receiver (Rx) and MACH3 Video Transmitter (VTx). Use m3 x 6 screws to attach to the frame 4 places, provisioned for 6…
Protects your frame from delamination and damage in case of crashes and double functions as landingskids. The part in the picture was printed in ABS and smoothed with acetone vapor. Designed for 6" version of the Chameleon Ti. Also works…
Common Marmoset Skull is an anatomical skull replica of a real animal, made as a 3d printable skull model for collectors, study, and display, with clear small-fossil and primate anatomy search terms. Use it for tabletop and diorama props,…
Just made an arm guard for the Marmotte. Has a locking tab for using a ziptie to secure to the arm. Odd that it has wider arms than the Badger Made to work with my skids and racewire protector that share one ziptie Category: R/C Vehicles
It is a simple merge of thing:3993056 and thing:3712955 I wanted to mount my antenna in the front of the quad. I had to cut out the print from the bottom in other to get the antenna in. Due to this modification, I had to print with…
TPU Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Sainsmart TPU Category: DIY
Ultra Realistic Minis #01. A baby marmoset sculpted with true-to-life fur, huge glossy eyes and tiny hands, hugging your finger like a ring. The hands and feet wrap around the finger and hold it, no band needed. PRINT NOTES Size: 27 x 34…
The original cardstock box for Mousou Games' small boxes does not fit the cards after sleeving. This box allows you to store the cards together with the original cardstock box in front as the display. I prefer storing the original box…
