Liczymy pasujące modele…
These are display models of Musellifer profundus Vivier 1974, a deep-sea gastrotrich. This worm is frequently encountered in the vast plains of the ocean bottom, from shallow coastal waters to the deepest depths. Members of this species…
Wydruk około 2,02 €–2,46 € nettoWstępna wycena jednego wariantu
A holder to support an expansion adaptor for developing designs for microcontrollers. This stand keeps the expansion adaptor from scratching the work surface and pins from shorting to each other. Fits boards that are 70X90 mm such as:…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…
This is a modular holder system compatible with an Arduino Nano, Arduino Uno, or ESP32. You can customize the setup by combining the microcontroller holder with the breadboard holder according to your needs. Simply connect the two modules…
This is a universal microcontroller adapter for my modular microcontroller and breadboard holder . https://www.printables.com/model/1041973 It should be able to hold almost any microcontroller out there. If you find one that doesn't fit,…
Bracket to mount a BlackMagicDesign Micro Converter (SDI-HDMI) on a surface.
This is a display model of Caenorhabditis elegans Maupas 1900, one of the most frequently studied species in genetics, transcriptomics, and even behaviorial biology . This nematode is related to other ecdysozoans (molting animals) such as…
Support my Work with a little Donation ♥ Compatible with: ESP32 D1 Mini ( https://www.amazon.de/dp/B08BTLYSTM ) ESP8266 NodeMCU Lolin V3 Module ( https://www.amazon.de/dp/B07Z69WT62 ) .. and more Microcontrollers with a maximum width of…
With a 0.4mm nozzle settings: 0.15mm QUALITY and 20% infill. no supports Material: PLA About microcontroller: https://learn.adafruit.com/adafruit-trinkey-qt2040
2026 July 8 Most recent code is at https://codeberg.org/dr_a_gon/foam_dart_blasters Code here still works, just older. Version 5.1 Added flyback diodes. New Version 5 Updated 2026 May - Single trigger, computer controlled flywheels &…
The bottom-left part of SiCK-68 keyboard modified to accept a Waveshare RP2040-Zero microcontroller . Has a snug opening for the USB-C port and the controller is fully constrained – you won't be able to wiggle it loose using a USB-C…
This cover is designed to work with the original beekeeb Piantor case, which you can find in the Piantor repo . It snaps onto the sides of the RP2040 microcontroller, allowing for easy access to the board without any disassembly. Mirror…
Prints with support, best placing is on the side with the screw hole. Printed in 0.2 height. For both models a different print. One is for the USB-C slot and the other for Micro USB.
This is a case for the STMicroelectronics B-L4S5I-IOT01A Discovery Kit. It has cutouts for all connectors on the top and sides as well as for the integrated range sensor. The board itself has outer dimensions of 90.1 x 62.1 mm and a hole…
Base: For use with the ElectroCookie solderable protoboard as well as various clones. Amazon ASINs: B07ZV8FWM4, B08BWPGSSC, B09WZY8H3X Designed to be wall or surface mounted. Accommodates microcontrollers such as ESP32, Wemos D1 Mini,…
The microcontroller is used to store actual microcontrollers and make it look cool. It is mountable to the IKEA Skådis Board, together with other electrical components. (It will take me some time to upload all the other ones). There is a…
I found these cheap " ESP8266 ESP-12S WIFI Microcontroller WS2812 LED Strip RGB Dimming Controller Support WiFi, infrared wireless control" which would be great for a small at-home WLED project so I designed an enclosure to help hide…
Micro-controller case, should fit any 2.54 mm pitch micro-controller like ESP 32, ESP 8266 or Arduino Nano. BOM: QTY 2 M3 X 20 Wood Screw ( https://www.aliexpress.com/item/32798366511.html ) QTY 2 M3 X 20 Button Head Machine Screw (…
A big robot with an HC-SR04 Ultrasonic distance sensor in the eyes and a mini-breadboard with an Arduino Nano microcontroller in the body. This is the first model I designed with electronics inside the model. This model seems complicated…
This is a display model for the Three-Spined Stickleback. With the advent of high-throughput sequencing, this species became a model for studying parallel evolution and local adaptation. The model is best printed as seen in the pictures.…
This is a display model of Staurastrum longipes (Nordst.) Teiling, a common freshwater green alga. As part of the order Desmidiales, this single-celled phytoplankton consists of two distinct hemispheres (semicells), connected by a…
Microcontroller case with lid and a separate section for the DS18B20 temperature sensor. Prints perfectly on Ender 3 Neo, with 0.2mm layer heights, only the lid need supports for the 4 legs. Printed in like an hour
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
Update: New Adjustable holder to fit all kids of boards are in the files! not required but recommend a rubber band around the adjustable holders to help with placement( shown in photos) Currently working on holders to fit other…
Microcolumn racks designed for our clean lab. These have a small platform so that the collection vial can be placed close to the column, so that splashes can't escape the vial. When the platform is raised there is space for a waste vial.…
A simplified model of a mud dragon: a kinorhynch (genus Echinoderes). These animals occupy the space between sand grains in habitats ranging from beaches, to the deepest depths of the ocean. Their bodies are visibly divided into head,…
Microcontroller R3 Case allows connections from the digital and analog outputs with the reset button. Also, the adaptable cases for the PIR, Dallas, Ultrasonic and LDR sensor modules can be located as you want in the case.
Base: For use with the Circuit Setup Project Box solderable protoboard. This is the board I use the most for my Wemos projects as it is big enough for 90% of projects, is reliable, and silkscreened on the back side. Refer to…
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
This model allows you to easily mount a microcontroller to your electronics project. It consists of: A socket that needs to be modeled into your project (e.g. using CAD) Mounts for different microcontrollers Currently supported…
The microcontroller can be mounted with or without pin header. Additional for the terminals you can print spacers to place them in right position. Useable terminals:…
Gridfinity container for holding Seeed Studio XIAO footprint microcontrollers. Print like any other gridfinity holder. Has space for microcontrollers with and without the header pins attached. Module also has finger grips to easily remove…
During a recent production, we noticed the absence of a suitable stand for SDI to HDMI or HDMI to SDI converters that could be securely mounted on production or DSLR camera rigs. I used Blackmagic Design’s BiDirectional SDI/HDMI 3G as a…
Since I couldn't find an accurate CAD model for the ESP8266EX anywhere online, I decided to model it myself. I'm sharing it with the community so you can use it for your own IoT and electronics projects! This model is perfect as a…
Rackmount for 2 Microconverters (SDI<->HDMI Bidirectional)
This would be useful if you've lost the original cover to your CHIP or if you want to extend it for making a custom mount.
Box designed for Wemos D1 mini (ESP8266) and WLED with 2 cable slots with included strain relief. Designed to use head-set inserts. IR remote compatible if transparent PETg is used
I designed a simple model for the Postage Board microcontroller, tailored for handwired keyboards. This model helps in the design process by offering a straightforward, accurate representation of the microcontroller, making it easier to…
A modular stand design to hold your microcontrollers when you are testing them or just place on the desk!
Housing for Atmel microcontroller flashing device base on Arduino Uno.
I designed this wall mounted spindle to hold Microcord spools. I've included the FreeCad file if anyone wants to adapt it for bigger or smaller spools. My spools are 55.5mm diameter, 33mm tall with a 25mm diameter central hole. After…
This is a board mount for the microcontroller modular enclosure. This one is designed for Circuit Setup solderable protoboards and snaps into a Base. Combine this with a Base & Cover for the full assembly.
This model is a 3D-printable guantelet/forearm armor designed with a focus on simplicity, modularity, and expandability. The overall structure is made up of clean, easy-to-print shapes that minimize print time and support requirements,…
Ce modèle est un fichier STEP représentant une carte Arduino Micro , non destiné à l’impression 3D , conçu pour être ajouté dans des assemblages mécaniques ou électroniques dans un logiciel CAO. Il inclut le PCB, le microcontrôleur…
Deutsch Modulares Rahmensystem für Breadboards und Mikrocontroller. Dieses Set enthält die nötigsten Grundkomponenten für einen sauberen und modularen Elektronik-Aufbau beim Prototyping und Experimentieren. Aktuell liegt der Fokus bewusst…
This is a cover for the microcontroller modular enclosure. This one has a height compatible with the Circuit Setup board mount. Cover snaps onto the base. Combine this with a Base & Board Mount for the full assembly.
This is a base for a microcontroller modular enclosure. This is designed to be a stand, but also has both screw mounts as well as recessed area for a magnet. Combine this with a Cover and Board Mount for the full assy. This is a modular…
Microcontroller Wandhalterung Luftschlitzen In das Gehäuse kann man einen Microcontroller auf einen Breadboard stecken. Der Microcontroller kann geladen werden mithilfe eines Kabels welches an der Seite raus ragt. Geeignet für Drinnen und…
The hinges use M3 screws. Recommended material is PETG or PLA, but any material can be used for the most part. It is designed with extra space for padding to protect the microcontroller or microprocessor.
Organizer made to fit: STM32 Microcontroller Case by Martin_Url https://www.printables.com/model/671138-stm32-microcontroller-case-b-l4s5i-iot01a Adaftruit half sized breadboard https://www.adafruit.com/product/64 Includes pockets for a…
Still a work in progress! I ran out of time because I'm off to the Nova Rock Festival—so the 3D parts and electronics are still incomplete and untested! If you're at the Nova Rock Festival too, feel free to send me a DM—I'd love to meet…
I wanted to control a 3D printed lamp I got from MakerWorld with my homeassistant but didn't want to spend money on an E27 smart bulb So this is inteded to fit the same hole as a regular E27 socket and has the space to fit a tiny…
Remix of @Ubiquities_552759’s Uno-Compatible Enclosure – Now Supports Metro M7 This is a remix of @Ubiquities_552759’s superb Arduino Uno-compatible enclosure, adapted to support ARM-based boards that follow the Uno footprint—specifically…
A simple remix for @tig33rs original bracket that removes the paddle shifter mounts.
A simple remix for @tig33rs original bracket that removes the paddle shifter mounts.
I wanted to control a 3D printed lamp I got from MakerWorld with my homeassistant but didn't want to spend money on an E27 smart bulb So this is inteded to fit the same hole as a regular E27 socket and has the space to fit a tiny…
The hinges use M3 screws. Recommended material is PETG or PLA, but any material can be used for the most part. It is designed with extra space for padding to protect the microcontroller or microprocessor.
The hinges use M3 screws. Recommended material is PETG or PLA, but any material can be used for the most part. It is designed with extra space for padding to protect the microcontroller or microprocessor.
