Liczymy pasujące modele…
Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…
-EN- _ *** 2022/10/11 *** FINAL VERSION 1.0 *** *** 2022/10/12 - The missing skin for the neck was added. *** *** 2022/11/09 - Fixed too loose "ears" and removed unnecessary extra parts. *** Do you like Chappie? His little brother is…
This is a remix of Baymax which has printable eyes that you can insert. The original model for some reason had very bad layering so I smoothed and increased the poly count. Print with lots of support under the hands otherwise one of them…
Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…
This is a minor remix of a Gridfinity USB organizer by Segan Designs who added the Gridfinity base to the original by Honza200. I reverted the change of Segan Designs and removed the USB C port for the original USB A port. Printing of…
NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…
NOTE: If you need even more organization, you can print the “ Any Size Hanging Trays for "Modular Drawer Dividers" (Parametric ) ” to provide even more space for your stuff! These trays work great for utilizing the unused vertical space!…
Mouse mounts for ikea skadis pegboard.
Removed the micro SD card slots for 3x more full-sized SD card slots. Only the 0.4mm tolerance non-stackable version remixed. This is a remix of nerdpersonthing's Hinged SD / microSD Card box ( Printables ), which is in turn a remix of…
Balisong butterfly knife toy. If you beginner in flipping knives i recommend printing mine remixed version beacuse its more durable. Oryginal version is of course prettier but standing prints are less durable. Print settings: Layer height…
Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
Just remixed this to be a key chain Category: Toys & Games
This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…
Remixed the Annoying Gift Box by u: LittleCoolBomb : sized in mm. separated the lid from the threaded tie segment. provided split bow for easy, support-free printing. added clearances of 0.3 mm for the tie segments. provided a faster…
Updated so the visor section is separate from the helmet. Haven't cut up into smaller pieces but it isn't too hard to do so within a program of your choice such as Microsoft 3dbuilder Maybe if you enjoy my work to make this remix you…
UPDATE: Thank you for taking a look at this project. I still use mine - but there is now a more active implementation of this modular idea that you would probably be better off printing. Please see:…
Full sized White Power Ranger Sword! Can be printed whole or as separate pieces.
UPDATED V4 (5/31/2024) I add a new version with very slightly softened shape on the inside of the “catching” part, to make it even sharper where it matters with very low layer printing height. Please read the recommended print settings…
A remix of Caleb Timoteo's excellent AT-AT pot plant. The main goal was to separate the parts so the base could be printed in white, with the AT-AT in grey. I ended up making a hoth planet base plate, which is recessed for the AT-AT to…
This is a simple remix of the USB organizer by Honza200 Removed 1 SD card slot and 1 USB A port Added 1 USB C port Added a Gridfinity base with no screw holes
A scaled-up version of the original, and then split and modified to allow easier printing, and for being able to join them back together. You can use as three split ramps, individual jumps or all joined together. I recommend printing with…
I wanted to speed up the print time and save some material so I made the hex holes bigger.
NOTE: The photos for this model do not reflect the actual printed STLs provided but are there to show how this shelf functions. There is a photo of 2 examples using the solid shelf + the “even faster” steps provided below using the…
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…
Find other STLs in the original model If you' re searching for a case which fits a RPi and further electronics, please find this Model If you're using an 800mm x 800mm panel for mounting AND you're using the new feet which are mounted…
I remixed this very beautiful egyptian beetle by Peter Farrell with the aim that it could print flat without supports in FDM. I took the opportunity to smooth the 3d model a bit. You can find the original model here Follow me on Instagram…
This remix adds revamped arms and legs to @JHB's already-awesome Bender model as well as adding new beer bottle and cigar accessories. The arm/leg segments are unified (use 5 for legs, 4 for arms) and use a ball-socket design for full…
print with supports, 10% or more infill. you can see the modifications I did in the attached picture.
This is a remixed door handle for the Semi-Official Prusa MK3 Enclosure Project ( https://goo.gl/ssr5fm ). I found that the magnets are hard to come by for the handles, so I remixed the handles to allow the use of the same magnets used in…
This base is remixed from https://www.thingiverse.com/thing:6292817 by Junolupus I've just made two pieces out of it, to print the footprint independent of the rest of the base. For example to use a different color and/or to use a much…
Fidget Anchor – Print-in-Place Fun! ⚓ Set sail for fidgety fun with this print-in-place Fidget Anchor ! The fully articulated chain easily snaps into the anchor, while the other end features a free-spinning loop with a bearing and spoke ,…
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
Soldering Helping hands, re-re-remixed A further evolution of the re-remix , based on this , inspired by this which originated from this . Phew.. Third-hand designed to solder wires and/or component leads , featuring: Adjustable distance…
I really enjoyed assembling the blaster from mh319, but there were some things I wished it had that it didn't. So here is an overview of what has been changed or added. I created instructions to assemble it. I added screw holes, an…
The side up orientation should help a little with strength and you shouldn't have any issues printing this as you would with any other model without adding further supports in slicer. Credit to…
Remixed @ RAMServices1959 from Thingiverse to make it slightly deeper to allow for purge waste to fit in for longer prints. Doesn't need supports to print. if having trouble fitting on the print bed in Bambu slicer right click on the…
Notes Since my poor tolerances of my 3D printer did not allow me to print the thread correctly, I remixed the great 03v2 file from Wilko to fit my needs (thank you for the fusion 360 file !) Fully compatible with the original author…
The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…
I didnt make the double post. if someone need it just comment here and ill make it.
remixed https://www.thingiverse.com/thing:4905821 to have 4 racks and removable base for flat printing. Have not tried to print, hope it works. Holds 40 pairs of earrings or 80 individual earrings.
Flashforge AD5M Door Handle - remixed to print without supports needed Only change is to angle the existing overhang so the part can be printed without need of supports This is regarding the DIY enclosure upgrade . HEADSUP 1: I just…
The tolerances were a little tight so I changed them in this version. Also fixed the weird looking hole on the large flap. UPDATE: I messed up the orientation, new model has the helical gears in the right orientation so that they can be…
Can be printed without support
I took the original Buddy Christ model and added a base plate with a nice roundover on top.
First and foremost, I want to acknowledge PortedtoReality for their outstanding work on the Han Solo Blaster DL-44, to whom all credit is due. My experience of crafting this blaster has been truly enjoyable. Over the course of a week, I…
AD5X Spool Holder remixed, no end clip needed, fits all spool sizes, Recommend 15% infill or greater for strength. No supports needed.
Remixed @third-dimension-labs clean WASD keyswitch/cap fidget. Opened up the string hole so it can hold 3/32 paracord. Added a chamfer to the bottom edge. Add your own switches and caps. There are 3d printed caps on this site.
I chose this model was because of the “Height”. I have noticed the power wires at the right-back corner, which means we would need more space to make sure the wires won't interfere with the platform leveling process. And the stage I have…
I modified the main body from CartoonishNerd's "Filament Guide for Ender 3 V2" to fit an Ender 3 V2 Neo. I opened the slot up to 2.5MM to fit the bracket on the Neo. I also added the word Neo to the top of it. For instructions and the…
All REMIXED parts end with _R. See this YouTube video to for more detail on the improvements: Thank you for all the feedback, it's allowed us to make this puzzle box extra robust and much much more fun! All the feedback has lead to…
Remix of the Korg Volca stand by beejums . This version of the stand will hold 2 Korg Volcas. Additional supports/parts are not required to keep the Korg Volca's in place. Print 2 and slide onto each side of the devices. Originally…
I made some changes to Usuarius great Rust Auto Turret design to fit the Arduino Nano and all the cables inside, add a lid to the bottom and some more housing to the laser. It's now self contained and just needs a usb power source like a…
Print the same way the original was. I modified this to fit humbuckers (non-covered, only the open bobbins will fit and barely). No more screw holes, deepened the electronics cavity. Narrowed and tapered the neck pocket and got rid of the…
Remix of Yeg3d's Hummingbird Ornament (https://www.thingiverse.com/thing:3307572), all credits go to the original owner. I edited the original file to improve printability by splitting the model in to parts that require minimal supports.…
Video of the make The Supportless Cute Dancing Fox Figurine created by Macroglossum is now available for 3 color printing on bambustudio! Follow me on Instagram / TikTok / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank Toy…
Saw this and did not have the container mentioned in the description so i pushed some threads and a bottom lid into the frog and avoided having to buy anything. Log space is fairly short. probably 10-15 mm (1/2") or so. printed in abs to…
Designed to be printed BIG. When I was a boy I wanted big army men, and they didn't make any. The full size G.I. Joes were far too expensive for this poor boy. It's now the future and I can ensure my nephew has huge, giant army men to…
This is a great dragon's head model by printedobsession. This will look amazing on any display, from a desk to a shelf. I RECOMMEND USING YOUR OWN SLICER SETTINGS. This is a very complex print. I recommend (for fdm printers) scaling it…
Remix v2 TonieWabe - Modulares Regal für Toniebox-Figuren. TonieHive - Modular shelf for Toniebox figures.
I remixed the modular tower from https://www.thingiverse.com/thing:3405964 and combined it with the improved locking ring from https://www.thingiverse.com/thing:4965368/files. For the lid to the 5 gallon Lowes bucket, I used…
A remixed version of user @ianfolds double hook designed to work with the 3m command strip backing for direct attachment. Prints with PLA and no supports. gcode file from prusaslicer for a prusa mini+ and PLA included.
This model was originally uploaded as an STL provided by @Hi_Im_Dave . It was a near perfect fit. I took it into fusion to add add a custom designed brim/mouse ear and then i noticed that the model itself had a lot of issues. In fusion I…
A remix of the JST Connector Pliers to keep them from falling apart. This model will need one heat-set insert for a 3mm screw and a 3mm x 6mm screw to keep them together. As with the original model, print in your choice of filament with…
Hi! Remix of the Bambu Lab Aux Fan Saver (Version 1_1) by @thrutheframe that expands the inboard mounting hole location to be able to install the second self-tapping screw that was in that location during shipment. Note I wasn't able to…
MobyDisk's OpenSCAD train track library SE has some AMAZING parts, but I wasn't a fan of the bridge, because you'd still require a block to support the track spanning the bridge. I took the bridge ramps into TinkerCAD and added a…
Das Orignal hat leider eine falsche Toleranz. Die Steckverbindungen in Form eines Trapez haben auf der langen Seite 1,2mm Toleranz und auf der kurzen Seite 0.2mm Toleranz. Dies hat zur Folge, dass das Original extrem schwer zusammen zu…
Wood Parquet - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. It has a 1 inch grid for D&D. Available as full tile, half tile, quarter tile and corner tile. There is also a half tile with a hole for the original…
Printed on an Ender 3V2 no supports required. 0.4mm nozzle.
Both the original and remix this is based on are excellent and 95% of the work on this enclosure is credited to those two authors, being EDNation for the original and Paradur for the original remix. https://www.printables.com/@EDnation…
Dog Bone toy remixed with custom name without the holes.
A simple remix to print without supports...
2023-06-16: Updated with stl and step for Mini SB released with v0.2r1 on June 10th. Accent parts are now 0.2mm thick instead of 0.4mm. Less hassle with one layer accents when using the 2 virtual tool head method. Remix of the great work…
Remixed to hold AA and AAA on both sides
Defense Tray This is a three-part tray, containing the following parts: Defense Tray - Base Defense Tray - Insert Defense Tray - Lid The insert is removable, and holds the defense tokens during gameplay. Defense Tokens I have included…
Update: If you're having trouble printing both back halves together, I've uploaded them as separate parts so they can print separately. When printing the back half, I suggest separating out the parts into objects and setting the infill on…
Foldable laptop stand Improved parts optimized for easier printing With the original version, the laptop would slide down, and the arms would slip through the holes. The individual parts are now split up for printing, so you don't have to…
Props to Ada Cohen for an awesome model found here: Dual Portal Desk Toy by Ada Cohen | Download free STL model | Printables.com And the printed bearing Ada made for people who don't have 608ZZ bearings:…
Printed right from the file, you can fit a 2.5" pot into the planter if you like to double up like I do, or you'll have the entire cavity of the Oddish with a 2.5" diameter opening for your plant. Print with or without drainage holes.…
Remixed the Carriage wheel to keep the whole thing nice and solid. You have to create a notch in the filament tube holder to ensure they are not colliding. Added some clamps if you want to secure the base.
These drawer frames and be interlocked to make a convenient storage unit for small parts. The drawers use a gridfinity base that will work with 6U high gridfinity boxes. Notes: If the pieces are too snug, use the originals. For me these…
I remixed the original version of @RIBsfit's design to correct most of issues that reported by @Mordiev. 2 M3x8mm and 2 M3x16mm screws are still needed to tight the hinges to into the frame. The backplate is not neededed but 4 M3 x H6mm x…
Remixed version of the original "Simple Cable Organizer" by DFV Tech . The cable holes on one side have been flipped to prevent the cable from getting unnecessarily bent and make it more “natural” to wind the cable. Model prepared for…
I got frustrated with trying to get the original ( https://www.thingiverse.com/thing:458903 ) to print right so I remodeled the entire thing up in Fusion360 with a flush bottom. I've also added a modified version for easier printing and…
Original design here: https://www.thingiverse.com/thing:6186432 I really like the design and idea from dalia5. I remixed theirs. Some items in this remix: - Increased tolerances - reinforced cutters - guides 'snap' into place - penny…
>>>Newer Altered Version Available<<< I am using Sunlu PLA+ and had to reprint the slider multiple times after just a few days. I modified the slider for increased durability and smoother movement, and I remixed the top plate for added…
Remixed from this model https://www.thingiverse.com/thing:3962846 prepared to be printed with MMU. It has the supports I have used but feel free to use your own.
Really liked the original model unfortunately the original posts had a taper which was too aggressive to hold on to most of my tips, so i redesigned the posts with a less aggressive taper and slightly different size to better suit my…
Using the Gridfinity Kitchen Knife Blocks by Chall005 as a base, I remixed the models to better fit my knife set. Added slots between the knives on the 8x2 to fit the steak knives that came with the set. Added slot in 9x2 to fit the hone…
Just remixed to give it some colour
Newly remixed to improve print quality Something to rest your cup of mead on inbetween pillaging celts. Comes in a variety of designs: Fox, Stag, Raven, Horse, Serpent, Otter, Wolf, Fish, Wyvern & Boar. Includes a holder with a similar…
This is a remix of Ubiquities awesome UNO Holder. I moved the UNO back and made a tray between the breadboard and the UNO to make more room for Dupont connector hookup. I also removed the 9V battery holder from the original model to make…
What is this? This is an enclosure designed to house an ESP32 board (specifically, an ESP32 DevKit V1 board), a PMS5003 sensor, and a DHT22 temperature/humidity sensor. It's powered through the ESP32's micro USB port, which is exposed on…
The original model is very useful, I wanted to thicken the front surface of the handle cover because the original seemed too fragile and the magnets were visible. I coupled a magnet holder to glue on the side panel. The magnet holder…
Square Stones - Remixed PlayTile, compatible with StageTop 3D Printed Gaming Tables. It has a 1 inch grid for D&D. Available as full tile, half tile, quarter tile and corner tile. Additional quarter tile with integrated water well, and…
This is Benchy But Articulated or turned into a Fidget Toy . Idk if I should call it Train Benchy OR Chain Benchy what ever sounds better. It's basically 2 Benchies connected by chains. Probably needs supports under the tops of the…
Modified the upper interface of HEPA to allow it to be freely placed above or below CARBON Change CMag wall thickness; Add Long Carbon and CMag; Add Short Hepa;
Remixed this great Wera holder for the Honeycomb Storage Wall.
All REMIXED parts end with _R. See this YouTube video to for more detail on the improvements: https://www.youtube.com/watch?v=v4uSPPAtK\_g Thank you for all the feedback, it's allowed us to make this puzzle box extra robust and much much…
