Liczymy pasujące modele…
This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
I designed the mounting parts for this field-assembly antenna to be strong yet easily taken apart for transport. The “boom” is 20mm pvc electrical conduit, and the elements are 6mm solid aluminium rod. The mountings consist of a threaded…
TC3EC 433MHz Moxon Antenna by TA3NT For detailed information, you can read our related blog post(TR). This antenna was designed by TA3NT under the name "TC3EC Moxon Antenna" to meet the antenna needs of 433MHz LoRa Meshtastic Nodes in…
Model designed in Autodesk Fusion. Antenna created with Moxgen software. Dan Maguire AC6LA https://www.ac6la.com/moxgen1.html Design under Autodesk Fusion360. Mount for navigation holder. Mount for Ikea Tisken suction cup.
Update: New tuned version available, find out more http://qczek.beyondrc.com/lrs-moxon-antenna-v2-tuned/ Just a frame for DIY Moxon atenna. Find out more on my blog http://qczek.beyondrc.com/moxon-antenna-for-lrs-tx/ Just uploaded…
3D parts to build a 10m Moxon. The antenna is a 3d printed design, using mast, guys, antenna wire and tent poles. Its designed to be lightweight and “quick” to deploy. the current configuration is: Sotabeams Tactical 7000HDS with ring and…
2m Moxon antenna center and boom insulator parts Boom dimensions: 20x20 mm (15x15 mm insulator V2) Diameter of Al tubes: 8 mm Print instructions PETG
Another Moxon antenna. I don't trust other designs and decided to design this antenna to my own specifications. This antenna was designed for PETg plastic, so the dimensions differ from those given by the calculator for a frequency of 868…
BACKGROUND: A little bit of gain can make a big difference in an HF radio antenna, and one of the simplest and smallest gain antennas is the Moxon Beam. Now you can easily build yourself a portable one for the 10 m band with some 3d…
BOM: 10mm PVC Tube: 4x 33,5cm 2x 12cm 1x 17cm 4mm Aluminum Rods: 1x 29cm 1x 31cm 1x 33cm 3x M3x5x4 press in nuts 3x M3x10 Hex-Screws Wire ~2.5m eg. LiYv 0,25mm² BNC Socket (example:…
Printed with PET-G filament.
Video of build instructions Note: I printed in PLA with 50% infill. I tried once printing in PETG 50% infill but the material was too soft when using a strong band and the frame warped. So just a heads up on that, feel free to experiment…
The moxon antenna at 868 MHz is combined with the Heltec V3 (V4) board in one housing for stationary use in the Meshtastic or Meshcore network. There are two installation options: on a stem for indoor or outdoor use, and on a mast using…
DVBT / DVBT2 Antenne. Nur für Private Anwendungen ! Erstellt nach Recherchen im Netz: MOXON UHF / 690 Mhz / Kanal 48 kann bis zu 5dB bringen. Angaben ohne Gewähr. Ich habe Kupfer-Lack-Draht (1,5mm Durchmesser) entsprechend vor gebogen und…
Printed with PET-G filament.
The Feedpoint Part is modified to be not so pointy (because pointy is scary ;-). Also I reduced the drill size of the inner holes, so you can use a cable tie (or knot) for strain relief. The optional cap can be used to close/protect the…
I absolutely adore my 2M Moxon that DL2MAN designed and I really wanted to try the 70cm design but my printer would not print his 70cm model as the build plate was just a tad too small. Therefore I decided to built a scaled down version.…
Parts to build a MOXON Antenna with 4mm tubes
Print four of the 337.5mm tubes, and two of the 107.5mm tubes. I printed mine in PETG, and it worked beautifully, with a nice bit of flex. I was able to print all the tubes in two plates on my Bambu P1S, and any printer of comparable size…
Moxon Antenna Frame (868MHz) For copper wire with a diameter of 1.6 mm.
I´ve created this 2.4 GHz Moxon antenna to enlarge the Range of my Wi-Fi-repeater. The cutouts are exactly the right size for use with 0.2mm² wire. Category: R/C Vehicles
Powerful antenna validated :) Design under Solidworks Created with Moxgen a software from AC6LA I will upload pictures later. other software used to compute Moxon Antenna : 4NEC2 EZWdemo (EZNEC) Happy printing Renba ON5DB Category:…
The detailed description can be found here: https://motleyscience.com/2025/11/22/portable-moxon-antenna-for-weather-radiosonde-hunting/
This vise clamps to the edge of a bench to be used and removable for storage out of your way. Wooden Jaws: The size of the vise jaws is your discretion. For the vise jaws I used 2x3 studs glued together. After trimming they were about 5"…
This is a simple old skool Moxon vise kit for metric M16 threaded rods and nuts. I printed the parts with the following Cura settings on my Ender 3: Layer height: 0.2 Shell: Wall line count: 4 (important!, these parts need to be sturdy)…
TC3EC 433MHz Moxon Antenna Splitted By TA3TRV For 220x220mm Printer Beds Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** Doesn't Matter Supports: No **Resolution:** .16 Infill: %20 **Filament:** Porima ASA Beyaz…
This is a Moxon antenna based on the DL2MAN 70cm UHF antenna although heavily modified. To construct it you will need the following: 4 x small thin cable ties. 1 x SMA socket with rectangular base and screw on nut…
English description: This is a tweakable Moxon antenna designed for LoRa projects operating at 868 MHz. Wire thickness could be 2-2.2mm (diameter) The front section of the Moxon antenna can be moved to fine-tune the antenna dimensions and…
Moxon antenna created to be easily tuned with VNA NOTE: It only makes sense to download and build it if you have VNA and know how to use it, without it you won't be able to tune this antenna. For most cases the TC3EC Moxon Antenna (…
The models are Fusion360 files
The moxon antenna at 433 MHz is combined with the Heltec V3 board in one housing for stationary use in the Meshtastic or Meshcore network. There are two installation options: on a stem for indoor or outdoor use, and on a mast using…
Please watch built video. Be careful!!! when use in vertical polarization the ground part of the antenna has to be on the bottom pointing to ground!!!! Do not make a sandwich with ground as bread!!!! Parts list. 1. BNC Connector…
CUSTOMIZABLE VERSION here <- click as you might guess, I highly recommend using the customizable version, where you can tweak all the parameters to your liking, only upload stls for the versions I actually used. If you somehow cant use…
This is a full radom for Moxon Antenna. Added the V5 version with pole fixation and line to close the radome more firmly.
This vise is designed to be used with some common metal parts that are easily available from most hardware stores. Additional hardware needed: Most hardware stores (Lowes, Menards, Home Depot) will have all of these items for…
This design was built to use fiberglass fence posts such as electric fence poles. They are around 9.75mm diameter and can be purchased from stores such as Tractor Supply for about $2.50 each. You may need to scale the parts up or down to…
Cut the 10mm tubes in half and added couplers which I super glued on the tubes. Scaled up couplers now included Special thanks to Angus Findlay who made the original!
Parts for building a Moxon antenna using 7mm PVC tubing. This kind of PVC tube is available in Norway from Bauhaus . The FreeCAD file is also provided. Feel free to make your own modifications. Use a calculator like…
Allows mounting of 2 meter moxon antenna by DL2MAN direct to a painters pole or broom handle.
I didn't know what to call this, but it's a spacer or a boom connector / adapter? for a Yagi antenna. This version is for 1" booms and 1" driven elements. I would love to make different dimensions based upon needs. I think the next design…
[PT/BR] Neste projeto é disponibilizado suportes e outras pecas para ajudar a montar antenas do tipo Yagi e do tipo Moxon, focando primariamente em elementos de 3.2mm e um boom de 16mm. No futuro outras medidas de boom serão…
It is very simple mixup already done components together. I need this because I glued pole adapter on my antena pole and like to easly use the antexa in both polarization. I hope it help someone other HAM.
This is a totally experimental antenna based on an article I saw regarding dual reflector Moxons. To construct it you will need the following: 6 x small thin cable ties. 1 x SMA socket with rectangular base and screw on nut (…
The Jumper Aion antenna on my T-Lite kept getting banged around in my bag, so I looked for a protective case I could use while keeping the antenna and module mounted to my radio. I came across a case made by Delorme (thing #5473009) that…
Best use for printing is PETG as it gives stronger support for the antenna if you are out doing some radio activity on the VHF band. Print x4 for the arms and go to DL2MAN for the supports and all credit to him for his model making in…
Remix with screw holes for easy pole clamping. Files for 6mm and 7mm screw included.
A Dmr hotspot antenna. 438.800 mhz I find this a couple month a go on the internet. Designer unknown But design is perfect It's has a swr 1.15, on 438.800 mhz
Ratefpv elrs pro moxon antenna mount for TBS Source One v6. Required: two 5mm or smaller zip ties. I wired the antenna wire on the bottom of the bottom plate with cloth tape Print in TPU
I wanted to join the 2m and 70cm segments together so that I could hold the antenna like a dual band handheld antenna. I cut the chamfer off of the pole adapter in my slicer and glued it onto another pole adapter so to make it long enough…
optimyed disign https://makerworld.com/en/models/2460408-moxon-2-reflector-antenna-868mhz?from=search#profileId-2701317
Best use for printing is PETG as it gives stronger support for the antenna if you are out doing some radio activity on the VHF band. Print x4 for the arms and go to DL2MAN for the supports and all credit to him for his model making in…
Remix with screw holes for easy pole clamping. Files for 6mm and 7mm screw included.
Allows mounting of 2 meter moxon antenna by DL2MAN direct to a painters pole or broom handle.
[PT/BR] Neste projeto é disponibilizado suportes e outras pecas para ajudar a montar antenas do tipo Yagi e do tipo Moxon, focando primariamente em elementos de 3.2mm e um boom de 16mm. No futuro outras medidas de boom serão…
CUSTOMIZABLE VERSION here <- click as you might guess, I highly recommend using the customizable version, where you can tweak all the parameters to your liking, only upload stls for the versions I actually used. If you somehow cant use…
3D parts to build a 10m Moxon. The antenna is a 3d printed design, using mast, guys, antenna wire and tent poles. Its designed to be lightweight and “quick” to deploy. the current configuration is: Sotabeams Tactical 7000HDS with ring and…
BOM: 10mm PVC Tube: 4x 33,5cm 2x 12cm 1x 17cm 4mm Aluminum Rods: 1x 29cm 1x 31cm 1x 33cm 3x M3x5x4 press in nuts 3x M3x10 Hex-Screws Wire ~2.5m eg. LiYv 0,25mm² BNC Socket (example:…
