6972 modeli
UPDATE (Nov 2025): Based on user feedback, the tight tolerance cards and parts have been tweaked to add more clearance between parts for easier assembly. UPDATE: Trying to simplify a little bit, so the version of each file with slightly…
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
This little Christmas ornament is perfect for your window or your christmas tree. It's easy and fast to print. Feel free to share your experiences with the community. Design by protechnordic, found on Thingiverse here:…
harry potter tags for Christmas, Pendants or keychains
Quick to print and optimised for 0,4mm nozzle much needed tree hooks every Christmas… Enjoy!!
Nativity Ornament with Star Hanger.
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Nativity Angel loop on back so you can hang it on the Manger scene or from a tree.
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Serve up some fun this holiday season with a tennis racket ornament! I think this racket looks relatively generic, but was based on the based on the Babolat Pure Drive if you're wondering. Could alternatively be used as a keychain. No…
Nativity in an Acorn Ornament.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
Oui oui, I have croissants in my Christmas tree! This is one of my first designs I made in Fusion a couple of years ago. And every year people say how cool they think the croissant ornaments are in my Christmas tree 🥐🎄 Size…
It's Christmas time and you want to decorate your tree. Then this Christmas Ornament is the best way to hang something homemade on your tree. Happy printing! Recommended print settings: Nozzle: 0.4 Layers: 0.2 Use support for overhangs…
This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the…
On my MK3S-MMU2 at the 0.15 layer height the print takes some 20hrs to complete. I have printed in PLA, using White, Red and Galaxy Black.
Ornament hanger for cristmastree
Today’s design continues the holiday theme with another Christmas ornament . This one has a more oval shape and features a spiral pattern made of individual open lines , giving it a see-through, airy look ✨. The ornament prints easily…
My other designs: Kelly Egan's ornaments These snowflakes sandwich tulle (mesh fabric) in the middle of the print, which suspends the center design of the snowflake. Print instructions The gcode has a pause in the center for laying the…
Yes, you need supports. Use paint-on supports to create flying buttresses that not only keep the icicles adhered to the bed, they keep the tiny arms of the icicles from breaking. I've provided a screenshot of how they should look. I've…
You can print this without support. I printed it on the XL but it should be fine on the MK4 or other printers as well. If you scale it down, it's also a nice Christmas ornament. If the hole is too big you can add a modifier in the slicer.…
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Just a simple Stargate Ornament - just in time to trim a tree Print instructions Easy print using PLA! I designed this with a little play between the Stargate "stem" and the Staircase Unit - you can either glue it in place, or slide in a…
YAY! It's DONE! New: Photo of the ornament printed in glow in the dark filament. I originally published this as a work in progress. After extensive testing including changes to the STLs, it's finally done. Since I originally published…
Christmas ball for hiding surprises. Diameter 80 mm. The model is designed so that the individual halves are held together by a simple thread. I print threaded on a backing with supports, but it is possible to print the other way around.
This is Universal ornament hanger. It consists of two parts - cap and hook (hanger?). Cap is designed to be printed in spiral/vase mode. Original file is pretty small with internal diameter of 7mm or so (depends on extruded line width)…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Santa Skulls Tree Ornament. Designed with stable diffusion and blender.
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
This design is based off of the Super Mario character, Princess Peach, I printed it with a .6mm nozzle, but you will get better details with a .4mm nozzle, I used White PLA, so Christmas lights would show through the design and make…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
This mini LED Christmas tree ornament really shines bright in a field of its own! All pieces simply slide onto one another making it very easy to assemble and put wherever! The tree uses, hot temps, no supports and gravity to create leaf…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Multi-purpose storage box, 80x128x30mm, easily holds a D175 POS machine with charger and USB cable. It can also be used to store other things. Print the lid and bottom in PLA with 3 perimeters, and the lock in PET-G Caixa de armazenamento…
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: Support on build plate only For a nicer top surface: Change the Lift Z to 0.1 Top fill pattern: Concentric
Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…
Any feedback would be greatly appreciated . SVG designed by camilahdezmiau, check her portafolio here: https://www.behance.net/gallery/108613589/Portafolio Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No Supports needed Scale it as you like :)
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
Simple one sided Xmas Ornament with varying heights for multi-colored prints without having MMU. In Prusa Slicer, select “Apply Color change automatically” to add color change breaks at .80 / 1.4 / 2.0 mm (using .20mm slices) and have…
Included the solid and 2-color version with 1 filament change built-in. Print your favorite.
I made this Christmas Ornament for my Christmass tree :). It's pretty easy to print. And sturdy Just use Vase mode. I was printing in on 0.2 layer. You can use brim to hold it better to the build plate Also I uploaded newer version of…
Gatto stilizzato da incollare a parete spessore 2mm
This is just another vase mode ornament. Print it in vase mode and enjoy :). It consists of many flat planes so it is very shiny and sparkly even if printed with regular PLA. Tips: You can use my Universal ornament hanger to nang it on…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Here's a new design for the holiday season. The ornament has two patterns that alternate. I was able to get reasonably good prints by printing the ornament as a single piece, but by cutting the ornament in two, I reduced print time and…
Simple door or window tag with stars and the moon with small loop for hanging up. Can easily be resized (minimal size: 50% = 65mm) Have fun and happy printing! :)
20 cm, topper, house number, bookmark, stencil
Ornament You can customize. How to customize with Fusion360 Just download bombka.f3d file and edit sketch with logo. How to customize without Fusion 360 In Your favorite editing software create a cylinder with diameter 100mm and height…
Native American Design Elements Santa Skulls 3 Christmas Ornament
This is my entry to the Sindoh Christmas Decorations Spare Parts - Design Challenge . In keeping with the theme I've created spare parts to repair Christmas ornaments. We've all been there. Ornaments that have a lost cap and/or hanger (I…
diameter about 100mm 3mm thick 2mm hole for hanging
little keyring made as a give away or as decoration i give them to presents and to random people that are nice, colleagues, friends etc You can hang them into your Christmas tree, connect them to presents or use them as decoration Spread…
es gibt eine größer und eine kleinere Version Druck: 0,2 mm Düse: 0,4 mm Unterstützung: Nicht erforderlich Rand: Nicht erforderlich Infill: 0% Schöne Weihnachten!
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color: colour, white Filament material:PLA Notes: 0,2/0,24 mm layer 0.4mm nozzle 2 perimeter 10% infill 0.8 mm retraction 0.4 Z-hop 50 perimeters…
I printed this with Arachne wall generator. The text prints best this way. Other than that, use default settings with a 0.2mm layer height. Swap colors halfway. The sliced file for the Prusa Mini has the filament swap included. Are you…
Gothic Tracery / Gate Decoration. Test with cube. Could make it into dice or something. Im just leaving this hear so I remember to come back to it. Feel free to print if you like.
Santa Skulls 4 Christmas Tree Ornament.
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
This is a multi-material Christmas ornament based on the Chicago flag. It's print in place, with a small, custom support for the loop at the top (no slicer supports required). After the print cools you can free up the outer two rings so…
I've re-envisioned my Grand Kaleidoscope Ball as a teardrop, going back to my original files and redesigning it from the ground up. The ornament looks dramatically different from each angle. I've printed it here in 2 pieces. The first 3…
This lamp is meant to be used with common LED tealights. It consists of a inner shell, where the tealight can be placed. The outer shell gets slid over the inner shell. The two parts can still be rotated between one another, so you can…
Be sure to print with color change to get multiple colors. Also if you want to modify the OpenSCAD file for lucky the leprechaun be sure to get the PNG from the photos section. (Posted to reddit as /u/NoveltyAccountHater ).
Just a little flexible hexagonal “JWST” ornament/patch/bauble/fidget/coaster piece I accidentally made while test printing swatches for another entry to the “Printed Fabric” contest: https://www.printables.com/model/1452441-flexihex-bowl…
Ukrainian Folk Design Santa Skull Ornament.
These print beautifully in either opaque or translucent filaments. I recommend using the Classic perimeter generator, not Arachne (the default in modern slicers). Yes, these need supports. Use paint-on supports. Add a row of supports…
Nachdem ich die Namensschilder für unsere Hunde gedruckt hatte, wollte meine Frau auch welche für ihre Pferde. Das Hufeisen ist in Corel Draw gezeichnet und als .dfx in Fusion 360 importiert worden. Anschließend noch den Namenszug…
Gatto stilizzato soprammobile o da incollare a parete. Dim: 15cm x 17cm x 2cm
Peace on Earth Ornament Celebrate the festive season with a meaningful touch by displaying the “Peace on Earth” Ornament. Designed to embody harmony, this all-white, elegant ornament is adorned with the famous saying: Peace on earth and…
20 cm, topper, house number, bookmark
20 cm, topper, house number
Simple Christmas ornament with Christmas 2020 on it, put in a blank one if you would like to personalize it. Print instructions Category: Decor Summary Simple Christmas ornament with Christmas 2020 on it, put in a blank one if you would…
I really like the Pinecone Ornament by Kelly Egan, but the cap for it has very thin parts that can't be printed properly. I've made walls a bit thicker, so one can print them well with a 0.4mm nozzle.
Print out amazing looking infill based decorations or ornaments with (almost) any design! Made entirely inside of Prusaslicer. Designed for the 2023 Holiday Decorations and Necklaces and Pendants contests To print one of these simply load…
Nose Ornament c. 500–200 BCE Peru, North Highlands, Chavín de Huantar(?), Chavín style Golden Effigies of Power: The Chavín Nose Ornament (c. 500–200 BCE) During the latter phase of the Chavín culture's influence, from approximately 500…
Printed in PLA with colour changes at 2.0mm and 2.4 mm to get the white/black eyes. Easy to print and does not use a lot of filament. Haven't tried it on a Christmas tree yet as it's only August at the moment I designed and printed this.
Ich wollte ein Teelicht mit 38mm Durchmesser in das Modell “Snowglobe Votive Ornament - Winter Cabin” (https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin) einsetzen und habe dafür diesen Halter gedruckt, der…
I made this ornament five years ago as my first design. My design skills at that time were beginner. I decided it would be a good project to use Blender to look at and fix the original model. I immediately noticed a massive issue with the…
Title says it all.
Diese Bieruntersetzer sind ideal zum verschenken geeignet. Der Durchmesser beträgt 10cm und die Höhe 3,3mm. Ein Infill von 20% genügt. Am besten ab einer Höhe von 3mm einen Farbwechsel einbauen, damit die Schrift wirkt.
This design has complex geometry reminiscent of an old lantern. Rotate it - it looks different from every angle! With my settings, it weighs almost nothing. This is the second in a series of four lantern ornament designs. This season, I…
Soprammobile gatto. Misure: 13,4cm lunghezza, 15,2cm altezza, 5cm profondità Stampato in PLA, riempimento 15% senza supporti.
Grinch Christmas Ornament Added strings and made the Grinch different type of ornament Be sure that you have arachne on in your slicer Keep the speed in normal range 60 to 100 mm/s No supports are needed If you have multicolor printer in…
Celibrate Yule in style wit this ornament decorating your Yule tree. Printing Print on side for best detail, see picture. Infill - 20% Layer Height - .15mm Supports - From build plate to bottom edges Parimeters - 3 Additional Parts - None…
This is a hanging dreidel (sevivon) ornament for your holiday decorations. There are 6 versions, with different letters: Blank Nun Gimel He Shin Pe The width of the centre portion is 60 mm for each design. If you'd like a different letter…
This model includes four separate .stl files , each corresponding to a different color. I printed each part individually on my Ender 3 Max Neo and then assembled all the pieces like a puzzle. The result is a clean, multi-colored design…
We have created a unique decoration for your Christmas trees. Hangable infill ornaments will make your Christmas time even more charming. You can have fun showing them to your loved ones and explaining their meaning. The models are 7cm…
Ecuadorian Tolita Tumaco Jaguar Ornament.
Velociraptor ornament to adorn your Christmas tree, or hang it up year round... and who doesn't think a velociraptor brings holiday cheer. Can be printed without supports. Variable layer height will produce nice results 3MF files have…
![Ornament Cap and Hanger - Christmas Spare Parts [Shindo Design Challenge]](https://media.printables.com/media/prints/496290/images/4041262_829f322f-285c-47f9-ae74-f4a91e3f6da7/ornament_on_tree_wtext.jpg)
