Wyniki wyszukiwania: ndi

Sanding Block 93x115, 115x140

Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…

Simple Sanding Block

Sanding block with simple construction. Made to work with a 38mm x 230mm - 240mm sandpaper stripe. After trying out a few sanding blocks, not finding anything fitting my needs. Either they were over-complicated, screws were fiddly, the…

Sanding Block (parametric)

Other parts: M3x20 bolt (2x) or you can change parameters M3n nut (4x) or you can change parameters Parameters: width lengthUp lengthDown height boltD boltHead boltHeadD nutHeight nutWidth

Parametric stackable cable organizer / winder (one-way or two-way winding) with FreeCAD files

Unstable fusion360 source file It seems like a recent F360 update broke the model file. Since it is not the first time, I'm in the process of ditching Fusion360 from my workflow altogether. I'm learning FreeCAD and will attempt a redesign…

Individual Nametag for glasses and cups (Wedding Decor)

With this model you can easil print your own name tag and attach it to your glass or mug. Ideal for any party or wedding. No more mixing up drinks. Ideal for seating arrangement. Customizing Nametag If you haven’t Fusion360 you can open…

Dishwasher clean/dirty indicator

I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…

Resistor Lead Bending Tool - Leg Forming

A handy resistor lead bending tool designed for quick and accurate forming of through-hole resistor legs. 🔧 Includes: A 6.3 mm spacing slot – ideal for standard 1/4W Arduino resistors A 10 cm gap – useful for larger power resistors or…

Sanding Block

Required a quick and easy tool to assist with sanding some of my cosplay props. Designed this in Fusion 360, and takes roughly 3 hours to print. Print instructions Print at 0.2mm with at least 20% infill. PLA works fine.

Biegelehre Improved - Through-hole component lead bending tool

Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…

earrings chrome (cactus and dino) / pendientes chrome (cactus y dino) (freecad files and gcode)

They can be used combined with each other or not. Printed with 0.4mm nozzle, 0.15mm layer height and 20% density Added freecad file in case you want to modify the design Se pueden utilizar combinados entre sí o con un sólo motivo. Impreso…

PutinDick

Z Correction Live Indicator

I really like to see the automatic Z correction doing it's job during prints. To see the tiny movements of the Z correction (Is it working? Is my bed level?), you can just clip this print to an unused part of the leadscrew. No tools or…

Pendientes de patrón

LOS PARÁMETROS DE IMPRESIÓN VIENE INCLUDIOS EN LOS ARCHIVOS PARA TENER LA MAXIMA CALIDAD DE IMPRESIÓN. Impreso con una Clearty Ender 3 v2 y diseñado en fusion 360º. Material utilizado, PLA, PARAMETROS DE IMPRESIÓN STANDAR QUALITY.…

Bow Sander (Sanding Bow) with f3d file

I have a lot of 1" thick sandpaper strips for the Rockler Bow Sander. The problem is that the tension adjustment is not well thought out - it's very difficult to get good tension. I've fixed that with this design. I've attached the Fusion…

Cycloid Style Extruder Indicator / Visualizer

Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…

Scandinavian-Designed Portable Purse Holder Hanger Hook - Stylish, 3D Printed, Compact and Durable Hanging Solution

Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…

Super Accurate Heliochronometer Sundial - 2025 - Accurate to within 1 minute!

A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…

Scandinavian Nativity Scene Blacksmith

Scandinavian Nativity Scene Blacksmith The Bible doesn't mention a blacksmith at the birth of Jesus, so why is he there, hammering away next to the shepherds and the Magi? 1. The Power of "Everyman" The Nativity scene tradition,…

Prusa Mini X-Axis Optical Illusion Visualizer Indicator

I wanted to create a cool X-axis visualizer for the Prusa Mini. I designed this based on a similar concept that I saw for the MK3S. This visualizer requires (1) 8x3mm magnet and super glue to attach the magnet to the X-Axis. The two…

Moses Hightower for Sanding Discs

It is designed to be modular to provide flexible use. The demi-spheres provides guides for easy gluing and you can print the grit number in 20 pt on a 3/8 ''(9mm) labels with any Dymo Label maker.

Precision Miter Sanding Tool for Model Making V2

My second attempt at this model, based on input from other hobbyists. The added protractor is by Joaelso. https://www.printables.com/model/171880-winkelmesser-protractor The M4 knob is by StriK3FoRC3 from…

Earring skull flower halloween pendientes aros colgantes

This model can be printed in two colors or If you prefer to print the model in a single color I hope you enjoy it! The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed…

Portable Equatorial Sundial (remix)

Now that the snow is practically gone & one can enjoy hiking through the woods or park again, wouldn't it be cool to have an old fashion way of telling the time where ever you go without having to rely on a distracting phone? To learn…

Jig for bending components & jumpers for 0.1" breadboard/Veroboard

Several development boards and breadboards use a 0.1" grid for component and jumper placement. The original author's (Steve DeGroof) design https://www.printables.com/model/675415-wire-jumper-jigs/remixes is the basis of this remix and…

Diamond Valentine - Heart Geometric Earrings - Boucles d'oreilles Coeur - Pendientes corazón - Herzohrringe

See our other models : Concept & Inspiration The Diamond Heart Earrings are inspired by the brilliance of cut diamonds combined with the timeless symbolism of the heart. This design merges sharp geometric precision with a soft emotional…

Dice Tower | One-Armed Bandit with Functional Lever for Dice Release

Dice Tower | One-Armed Bandit with Functional Lever for Dice Release This model remindes of a one-armed bandit in the casino. You roll the dice inside the tower. When you pull the lever, the dice fall out and you can see the result! The…

Small sanding or polishing disk for a handheld drill

Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a handheld battery drill or screwdriver. It will accept…

1989-1992 (at least) Toyota Corolla and/or Geo Prizm Shift indicator and dust protector

So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…

Extruder Rotation Gear Visual Indicator

This gear has a boss on it to house a round magnet, I added slots on the spokes to see what the printer could do, the boss fits in the hole in the extruder to center the gear, it is also nice that you don’t have a magnet rubbing on the…

standing initial: letter N

Adjust the size acording to your needs.

Pendientes Golondrina

0 dificultad de impresión

Visual Dessicant Indicator for Filament Drybox (V1)

This part takes the place of a humidity sensor in filament boxes. The idea is that sometimes we are not interested in the % R.H. reading, we only want to see (at a glance) whether it's time to change the desiccant inside the filament box.…

standing initial: letter R (version 2)

standing initial: letter R

Pendix eDrive Dustcover

This is a dustcover for the battery mounting plate for the Pendix eDrive e-bike system. Print instructions In the 3mf files for both PLA and PETG I added modifiers for the following. 1) first 2mm is printed with 100% infill because this…

Icelandic Totem

Icelandic Totem.

Easter Eggs · 10 Styles · Standing Easter Egg Decoration

A set of 10 different easter eggs designs to use as home decoration spreading springtime joy and festive charm. The models are approx. 10 cm high and 1,2 cm thick. Print Settings Print on the side (model files are already correctly…

Scandinavian Vases

Three sizes of vases inspired by Scandinavian design aesthetics Large (178mm) Medium (150mm) Small (120mm) These are designed to fit on a mini printer (Prusa Mini or Bambu A1 Mini), and look exceptional with fuzzy skin (0.2mm / 0.2mm)!…

Fishing Bite Indicator Glowstick

You can attach this bite indicator directly to your line. It is designed for glow sticks up to 45 mm / Ø4.5 mm. I printed it from cheap Glow in the Dark PLA The thread is in the beginning quite tight, but works fine if you give it a…

Earrings organizer - Organizador de pendientes

ESP Archivo A y C: Impresión estándar de PLA. Archivo B: En la configuración de la impresión se debe tener en cuenta que en las “carcasas horizontales”, las capas sólidas; tanto superior como inferior, deben tener valor 0. Ajustando el…

Standing table clock - very modern look - NO SUPPORTS - four variants of dials

Unless you come up with some extra complex option yourself, you really don't need a multicolor attachment! Four types of dials in two sizes. You can't do without these parts: (cifernik) four dial variants (A, B, C, D) 15 or 20 cm option…

Pendientes Zebra

-Aunque yo los he impreso bastante finos a fin de que sean flexibles recomiendo hacerlos un poco mas gruesos para que sean mas robustos. - 0 dificultad de impresión

Valentines Candy Vending Machine

It's a fun model to print, it takes around one day/24 hours to print but it is worth it. Infill - 15% Supports - Yes -Instructions- Prep pieces by removing supports and sanding edges if needed. Take the base and the rod with the heart on…

Extruder_rotation_indicator_Turbine

Extruder_rotation_indicator_Turbine

Scandinavian Idol

Idol of Viking Sorcerer/Chieftain channeling protective magic through his beard

lockable extending pillar

a simple screw-like extending pillar, with a rotation locking slider for locking the height.

Screw extending scratcher

Instructions: (I printed the pictured model in “Lila” colored pla with build plate supports and brim. I used defaults but I could recommend increasing the claw infill to make it a bit more solid) The ‘extender’ goes through the ‘screw…

MMU3 Indikator

Zur optischen Anzeige an der MMU3.

Work Sharp Knife Sharpener Sanding Belt Storage for 1” x 18” Belts

Store 1” wide by 18” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.

Work Sharp Knife Sharpener Sanding Belt Storage for ¾” x 12” Belts

Store ¾” wide by 12” long sanding-belts for your Work Sharp knife sharpener to prevent damage to your expensive belts. Print multiple boxes in different colors to protect all your belts.

Clean / Dirty Indicator

Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Default as modeled Glue a magnet to the back after printing.

Mini Sanding Tools

A bunch of small sanding block tools of various profiles intended for getting into tricky spots in small-scale sanding and polishing work. The tools are 20mm wide and feature a bolt on each side for tensioning and retaining a sandpaper…

Simple Sanding Block / Sanding Tool

This is a three part sanding block, made to be very easy to put together. Scale as you like, but be wary when scaling down, the bolt may need more clearance. At 100% scale needs about 19cm of sandpaper. Recommended settings (best to use…

Sanding Block

To assemble, you will need an M6 screw at least 25mm long with a hexagonal head and an M6 nut. It is also possible to attach a thin strip of foam to the sanding blocks, but it is not necessary. See also: 18mm Utility Knife…

Sanding Block (Updated! and a new Version in 11 inch)

Deutsch: Das ist ein Schleifpapier-Block passend zu den Schleifpapier-Rollen mit einer Breite 25 mm (1 Zoll) oder auch zum selber zuschneiden dafür etwas breiter in 300 x 40 mm. Für den leichten Zusammenbau benötigt man nur noch eine…

DisKeeper - Modular sanding disk paper storage 125 and 150 mm for wall mount or french cleat

This is a storage solution for sanding discs in 125 or 150 mm diameter. They can be stacked with an integrated connection system and they keep together also without screwing them to a wall or wood. Anyhow for more than 5 pieces it's…

Versatile sanding block

Having trouble finding a sanding block that can do multiple jobs , one that can grip the paper properly, with great tension ? This one does it all, while being optimized for printing and assembly ! 🤩 Do you like the design? You can help…

Serious Edge Banding Trimmer (cheap utility knife blades)

This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…

Condition, status and effect rings for Dungeons & Dragons 5E and Pathfinder 2E

A collection of the most common condition, status and effect rings for your D&D and PF gaming table. Sized to fit around medium bases or hang over larger miniatures. Included step and fusion 360 parametric source files so you can play…

Corrugated condiut connectors

English These couplings or connectors are used to join two corrugated pipe sections that are used in electrical installations. Model files are available for the common pipe sizes DN20, DN25 and DN32. I experimented a little and created…

Improving fine motor skills, designing a 3D FDM printed orthosis to assist in the rehabilitation of individuals with hand spasticity

video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…

SnapSand - quick reload sanding block

Break-action sanding block Open. Load sandpaper. Close. SAND IT! Your sanding block experience has never been easier. USE: Before first use, to open the hinge: Hold the sandpaper half by both sides in the middle Holding this half in the…

Dental Mandible / Maxilla Model for Brushing and Flossing Education

Designed to be printed and used for teaching proper brushing, flossing, and water pick techniques. Gaps between the teeth will allow full demonstration of flossing in particular. Model in the photo is printed at 200% of normal adult size…

D&D 5e Condition Rings

Saw indicators like these made by thelukec. I wanted the letters to be more defined, so I remade the model with the letters embedded in the ring, but raised by a millimeter. Happy with the way they turned out. This is the first model have…

Earring christmas tree arbol de navidad pendiente aro

The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…

Spring Bending Tools – Create Robust and Durable Springs

With these 3D-printed tools, you can create strong and long-lasting springs yourself! — not only for the Wire Stripper Pro ( https://www.printables.com/model/1482697-wire-stripper-pro-functional-maker-tool ), but for many other projects…

Fidget Toy | Octahedron Expanding Into Cuboctahedron

I saw a video of this piece made of metal and wanted to have it too. So I tried to build it myself for the challenge. This is the result. It's a cuboctahedron which can be formed into an octahedral shape by rotation. The small joints are…

SANDING DISK STORAGE BOX AND LID

This simple box allows tidy storage and prevents curling of sanding disks. The slot in the front allows easy selection and removal of the required grit, and dividers are marked with common grits. This box is designed for 125mm (5") disks,…

Heliochronometer - World's Most Accurate Sundial

Summary The Heliochronometer is just what its name implies—a solar chronometer. It is not a toy or ordinary garden ornament, but an astronomical instrument for precision timekeeping as well as education. Main Features Accurate to within 5…

mechanical container - print in place expanding iris

print in place mechanical container. How I designed and printed it: video of operation: I printed this at 20QUALITY in prusa slicer and it worked fine. It was really stiff for the first couple times but loosened up pretty quickly. You may…

Icelandic Horse String Art

String art featuring an Icelandic horse. Print at 0.3mm layer height without supports. If you are using Prusaslicer check the 'detect thin walls' box and make sure the 'wipe while retracting' is unchecked in your printer settings.…

Extending claws

Here's the V7 of my wearable set of claws, that extend/retract with your fingers movement. The ZIP file contains a wide range of sizes and a few variants, allowing for a good fit (hopefully) for most users.

Wave Vase – Decorative Wavy Vase | Modern & Scandinavian Style

The Wave Vase is a decorative vase featuring a fluid, layered wave design , created to bring a touch of modern elegance and Scandinavian style to any interior. Fully modeled in Blender , this vase blends organic shapes with controlled…

ISO 7010 Warning sign collection (complete) / Warnzeichen Sammlung (vollständig) (W001 - W067)

This is a collection of all warning symbols (W001 - W067) according to ISO 7010. All the models are drawn by hand, so some minor differences to the norm can occure. The signs are based on the images from the following Wikipedia article “…

Sanding Mouse for Woodworking 5in Disk Sandpaper

I printed with 40% infill ABS for better structural rigidity and heat resistance.

Extruder Indicator / Visualizer Arrows

A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm If you like check out my other designs too!

Beyerdynamic DT 770/880/990 Slider Replacement with Logo and L/R Indicators

Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…

openGrid - Self-Expanding Snap

An open-source self-expanding snap for openGrid, available in Standard and Lite versions. It is based on David D's official openGrid snap, with a split spring mechanism that expands when the connector is tightened. This gives the snap a…

Drone landing pad

Inspired by https://www.printables.com/model/88-spacex-landing-pad by https://www.printables.com/@Cipis Printing instructions Final perforated look is created only by slicing settings. Inner part is without bottom and top solid layers and…

(Mini-Mini) Micro Sanding Blocks

3D-Printed Micro Sanding Blocks – Precision in the Smallest Details When it comes to fine detail work, every millimeter matters. Tiny edges, intricate curves, or delicate engravings can be difficult to refine with traditional tools.…

Box boxes bowl bowls tray trays easy printable for candies bonbons sweeties easy print include inserts

1 are covers, 2 low boxes 4 high boxes, 3 low inserts 5 high inserts. Size cca 145x145x39 (54)mm. Inside hight 30 and 45.5mm.

Capital Letters Free Standing

I wanted some free standing letters, so I used the Raleway font as a base, and expanded them to be 10cm high and 2cm deep. In addition, some letters have a curved base, which makes it difficult for them to stand upright, so I added a…

Earring weed leaf pendant pendientes and keychain marijuana

The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…

Gridfinity Peg Standing Metric & SAE Socket Holder - 1/4" Drive, Regular and Deep Sockets

Gridfinity Peg or Standing Socket Holders - 1/4" Drive, Regular and Deep Sockets 1 X 4 Gridfinity Footprint Metric Includes Space for: 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm sockets SAE Includes Space for: 3/16, 7/32, ¼, 9/32, 5/16, 11/32,…

Print in Place Expanding Ring Mechanism

Print Settings Test Print Before printing the whole ring, I'd recommend making the test part to check if the tolerances are fine. You should be able to move the joints without using much force to break them free. If this is not the case,…

Cap for car aircondition refill valve, low pressure side

lost your cap while refilling your car aircon? just print one. This is the M8x1 R134a System Cap, 13 mm. Downside: The thread is along the layer lines but as there ist no pressure and just a dust cap it'll work.

MARVEL STUDIOS Standing multicolor logo

Simple as it could be, just marvel studios

Nozzle Size Indicator

Overview A nozzle indicator for your 3d printers. I have forgotten too many times to not have one of these and it gets more difficult the more printers you have. Double sided tape is required to affix the indicator where wanted. Printing…

Valentines Heart Standing Buddy

Valentines Heart Standing Buddy Cute Heart Buddy with a friendly, minimalist expression Clean and simple design inspired by Valentine’s Day ❤ Perfect as a gift, desk decoration, or small display figure Optimized for easy and reliable 3D…

BUTTERFLY EARRINGS / PENDIENTES MARIPOSA

Impreso con boquilla de 0,2mm y altura de capa de 0.14mm. Perfil de impresión incluído. Printed with 0.2mm nozzle at 0,14mm layer height. Printing profile included.

Earring K-pop korean love pendientes aros

TWO FORMATS, LONG RINGS OR ATTACHED RINGS, PAY ATTENTION WHEN DOWNLOADING The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although…

Ankermake M5 - Spoolholder - Expanding Mandrel

UPDATES Step file of the assembly has been added 2023-08-05: NOTE , if you use cardboard spools, try and keep the spool off of the very edge of the holder (with the two very thin parts on each key); Cardboard spools tend to be hollow in…

Sanding tool

Purpose: This is a sanding tool for the drill with a hexagonal connection for a better torque transmission. I know, there are some similar tools already available, but I couldn't find one which fits to the thickness of my sandpaper. For…

Dread Pirate Captain and Totally Not a Flock of Parrots Pretending to be a Pirate

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Angled corrugated condiut connectors

English Recently I created model files for the straight connection of two corrugated conduit sections in the electrical installation. See also https://www.printables.com/model/1292339-corrugated-condiut-connectors . I didn't think bend…

Customizable D&D 5E Condition Rings

Customizable D&D 5E Condition Rings Included: - Pre-configured Condition Ring Sets in 4 different styles (Embossed, Engraved, Outset, Inset) ready for printing. Each set includes 26 different conditions and 10 generic numbered rings for…

Pendiente de Gengar / Gengar Pendant

Pendiente de gengar, facil de imprimir con cualquier material. Recomiendo usar boquilla de 0.4, 0.3, 0.2 o 0.1mm para mayor detalle y no altere diseño. Hecho con PLA+. Gengar earring, easy to print with any material. I recommend using a…

Gard Heliochronometer Sundial Derivative

Summary This design was inspired by the Aten Heliochronometer Sundial, model B4003, designed and built in the 1990’s by the craftsman J.D. Gard of Tucson, Arizona. It’s a beautiful instrument made out of brass and aluminum, and it claimed…

Lego Compatible (80679.dat) Animal Squirrel Standing

This model is compatible with the lego system.

Halloween Ghost Cat Earrings / Pendientes Gato Fantasma

Ghost Cat Earrings / Pendientes Gato Fantasma

Condition rings - DnD/TTRPG

Rings to track conditions in DnD. Besides the 15 conditions from the conditions section in chapter 1 of the PHB, I also added Bless, Concentrating and undefined ring. Undefined can be used if you need to track something that isn't on any…