Liczymy pasujące modele…
Lobster! Print in place, with no supports needed. Work in progress, feedback appreciated :) March 5, 2024: version 5 is complete! There are two different editions. V5-A has much freer leg joints, so that it can be handled more roughly and…
This is a reconstruction/remix from the original one that you can find on thingiverse here .
RC crawler obstacle for your Axial SCX24 or Traxxas TRX-4M! Designed to fit just on a print bed for a MK3s. Wide enough for both an Axial SCX24 and a Traxxas TRX-4M. I printed this in PETG (but PLA works as well) using fuzzy skin to help…
Lobster The body is divided into multiple interlocking segments, allowing for fluid, life-like movement from the head to the tail.features anatomically inspired textures, including the ridges on the carapace, segmented tail plates, and…
Crawler Obstacle #1: Simple mountain. Exactly as it sounds - a typical mountain climb for an RC crawler. Scaled to fit exactly on a MK3 print bed, and width right for an SCX24 or TRX4M. I printed with PLA, turned fuzzy texture on to help…
RC Crawler Obstacle #3: Flex Twist. An obstacle designed to test the flex and twist of your Axial SCX24 or Traxxas TRX4M! As created, it will just fit on a MK3 printbed. Printed in PLA with fuzzy skin to help with traction. You can see it…
No Support. Glue not required.
RC Crawler Obstacle #2: Complex mountain. Made from some simple geometric shapes, this obstacle really can be challenging! Designed to fit directly on the MK3 print bed, and fit the track width of an Axial SCX24 or Traxxas TRX-4M.…
Summary No supports required. Just slice and print!! Based on Articulated Shark from McGybeer and Lobster from rowiac . After printing, the tail and the jaw should get free with a little force. Articulated Lobster by damienfremont is…
Hier ein Hindernis und zusätzliche Zaunteile für Spiele mit Schleich Modell Pferden. Hinweis: Ich habe mittlerweile etliche der Gatterteile gedruckt. Bei Verwendung von PLA brechen die Verbinder viel schneller als wenn PETG verwendet…
This cute lobster fidget toy is the perfect fidget for the little ones. It has articulated joints along the body. Available to print for personal use.
A flexible fidget lobster. Joints might be a little stiff, but with some movement should loosen up nicely. Enjoy! Check out my homepage for more of my articulated models
A fruit bowl in Voronoi design that can be printed in any size by changing the scale. Eine Obstschale im Voronoi Design die durch Änderung des Maßstabs in beliebige Größen gedruckt werden kann.
A set of printable anti-tank obstacles with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm or heroic scale wargaming. Dimensions: Height: 24mm Width: 22.8 mm / 24mm FDM friendly and…
Inspired by my son - after he took my “wave” crawler obstacle and turned it upside down! Seriously! A simple print - that when turned upside down becomes a simple teeter-toter or balance-bridge for your rc truck. Can you get it to…
This is barrier mold for fingerboarding. Doing it yourself is better option than buying it from internet for like 20$. My settings and material: PETG 15% infill 0,20mm layer height 3 wall loops To hold 2 parts of mold i used clamp 1 or 2…
skate park compilation by rafster300 on Thingiverse: https://www.thingiverse.com/thing:4794263
RC Crawler Obstacle #5 - the Chevron Bounce. Designed with the Monster Truck chevron pattern in mind, and trying to really upset the suspension of the crawler. I printed with PLA and turned fuzzy skin on to help with traction. You can see…
Just a lovely movie-accurate prop to enhance your Charlie and the Chocolate Factory costume this year. One of the files has a set of 4 additional little feet as supports for your resin printer. Here's a vid of it being painted with nail…
This is a remix from kingCondorDanko's model of a skate obstacle. I detached the rail from the ramp, so that you can print them seperately.
I remixed it to include a void in the middle, to save some time and filament when printing. I also fixed a missing layer under the main arch that would cause the print to fail. I would strongly recommend not to print the original without…
Boxes - it looks simple - but you better go through it just right! Get it wrong, and your axle will get hung on them! Inspired by the flood of Amazon boxes that happen in my house… Printed in PLA Check out my other obstacles as well!…
My daughter wanted her Schleich horses to have more fun - so I came up with those simple jumping obstacles. Made with FreeCAD, the poles are available in both single and dual extrusion variants. The crosses print without supports laying…
The Wave! This one is challenging - you better have good tires and good weight distribution. The “waves” are spaced right about the wheelbase of the smaller crawlers. Your truck will have to pull up both front and rear tires. Printed in…
překážka, rampa na fingerboard
Simple print to test the sidehill of your mini rc crawler! Print a few of these and put them together in different orientations. Each way creates a new path and challenge. I printed in PLA.
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
My 7 year old son just started to drive an RC car so I made those cones to achieve some driving skills, turning, 8s, etc… Easy print, I didn’t do it but you can slice it with some material changes to put a white stripe in the middle.…
This obstacle course is intended to be used with the 3D Printed RC SkidSteer V3.0. The boundaries are universal links that can be used to make your course outline. The obstacles can be added in whatever order you prefer. The clip system…
ill be adding more obstacles files daily. heres just the begining.
Another take on the movie prop, this one is assemblable so you can paint each piece indivdually before super-gluing them all to the 'core'. Here's the single one-print piece:…
A lobster (or crawfish) that is mostly flat and has round eyes. A fun easy print that was made for use in a class at a local nature center. Print Settings Printer Brand: Prusa Rafts: No Supports: No Resolution: 0.2 Infill: 12% Notes: An…
Lobsterback Jigs to mark up cut angles, ranging from 1"-5" tubing and 5-30 degree angles
A fan guard for 40mm fans, which I installed on the Creality Ender 3 with HeroMe mod. HeroMe exposes the fan, so I designed a guard. Does not need screws to install. Can be used on any other printer with 40mm fan. Most other guards I saw…
Pour améliorer l'extraction des poussières de la scie circulaire Festool TS 55 EBQ, certains conseillent de boucher l'ouverture du carter qui sert à changer facilement la lame. Un peu de ruban adhésif suffit, mais c'est plus élégant et…
Printed with 2 color changes, the daughters don't mind the different colors on the outside of the frame. Printed with DasFilament's Royal Blue and Infinity Blue and Extrudr's Chocolate Brown for the top. Water texture borrowed from…
This is an obstacle I designed for fingerboarding, which are miniature toy skateboards.
Parking curb for fingerboards.
The 3D printed Lobster that actually does... nothing. Nothing but look cool, that is. Doesn't need tokens Can't delete your emails Can't leak your auth credentials Also can't manage your life Looks cool Needs minimal supports
The tail kept falling out so I opened this in Blender and attempted to fix it. I've never used Blender before but luckily Claude was able to help me. Needs a little force now to break the tail free but it does seem to come free and isn't…
You need: 8x 20mm M3 screws 4x part1.STL 4x part2.STL 2x part3.STL 2x part4.STL 2x part5.STL or part5_short_version.STL 4x support.STL (needs to be glued on) Glue
A bicycle spoke tension meter based on the original Jobst Brandt design, my personal favorite. Once calibrated, the tension meter is less affected by spoke geometry than others because the deflection is measured from the same side as the…
This little sea critter just got a pair of shiny new glass eyes! :) 3mf file provided with negative modifiers for eyes. Holes will appear after slicing. Printed with no supports and no brim. Fixed(non movable) and movable claws versions…
They work perfectly fine and snuggly fit. My recommendation is to print them using PLA+. My Settings are listed below: Layer Thickness: 0.28mm Infill: 50% - Cross 3D Print time on a Ender 3 Pro with a mainboard upgrade and BL Touch: 11…
ShadowJak's version on Thingiverse had a very small gap between base and model, which showed as errors in some slicers. For this remix I fixed that by moving the model down to the base.
This model is designed to be printed without supports, saving you time and material. The robotic lobster features movable parts that allow for a variety of movements and flexibility, adding a playful, interactive element to your prints. I…
Frosthaven includes 9x “Power Conduit” obstacle tokens, this miniature is intended to substitute for the cardboard token. I didn't find one available for download so designed my own. I print this in PLA with a 0.12mm layer height.…
“This chubby, boyish image of Ganesha seated with the soles of his feet pressed together developed in Indonesia, where he is particularly popular. Originating in India, he gained special importance across Southeast Asia and even in China…
Lobster by Shawn Gano, modified with a hole in the rear end to be able to attach to things.
Leicht geschwungede Schale mit riffelmuster Sehr Robust Anwendung z.b Für Obst Bonbons u.s.w wenn euch das gefällt bitte Liken Über komenttare würde ich mich freuen schaut auch meine andern Modele an !! Lieben Gruß und ein schön Tag !!
This is my take on a case for the Knobster DIY for Air Manager. https://siminnovations.com/wiki/index.php?title=Knobster_DIY I purchased the Arduino Nano from Amazon.…
Minimalist lobster with polygonal claws and segmented angular body.
Added some extra material to the right arm (had a tendency to break off) and thickened the antenna. Also made a version with a keychain hole cutout. Category: Food & Drink
🦞 Bring a little ocean charm to your space with this 3D printed lobster! A fun addition to your desk, shelf, or sea creature collection, it also makes a quirky gift for lobster lovers. All the personality of a lobster—no aquarium required!
A simple print in place articulated lobster! I recommend printing at the most detailed layer height you printer supports for the smoothest result. Other than that this model does not need supports to print. and at the default size should…
This object has been designed in order to be simply printed and used for your dioramas or to create lots of realistic cement obstacles using the mold by strain cement inside of it. The mold is made up of two parts: you have to join them…
Hi everyone! Here is a REMIX from the original Xoxu file: https://www.thingiverse.com/thing:1582398 You cand find all the codes, bill of materials and wiring on my GitHub:…
I proudly present to you the beauty that is the “Giant Lego Lobster with a Gun”. WARNING: I have NOT printed this, the tolerances should be fine as I left a good amount of margin between the stand and the lobster itself, as well as the…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Horse Jumping Obstacle for Schleich stackable Pferdespring-Hindernis für Schleich stapelbar reverse engineered from original part
MagHex metal obstacles for use in Forsthaven.
Obstacle for rc rock crawler
This fingerboard obstacle is inspired by the iconic stairs of the Philadelphia Museum of Art, also known as the "Rocky Steps." Its sleek design and textured surface offer a unique challenge for fingerboarders. the perfect obstacle for…
Press fits together and stays put if you have a well calibrated printer. Printed with PLA at .2mm and works great.
V2 update - Fixed a few minor artifacts and added a chamfer to the drop hole. If you have the original, probably not enough to warrant reprinting. Redesigned the inside of the bin to aid the smooth flow of the purge pellets into the…
Have fun with this low poly lobster! Check out my profile for more low poly animals.
eine Anlehnung an die Obst Kisten vom markt bzw Bauernhof die aus holz gefertigt werden über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Horse jumping obstacles for schleich
This pre-painted lobster figurine is creation 1 out of 4 in this mini-series by guest artist SparkyFace5 to add to our ever growing library of animals for kids education. Check out her models and memberships on Thangs-…
eine Anlehnung an die Obst Kisten vom markt bzw Bauernhof die aus holz gefertigt werden über likes makes und follower würde ich mich sehr freuen, Peace MazZe
I used pla, 10% infill
Website about this thing: http://csopevneni.xf.cz/Vybava/Rozsochace/Kotrmelce.htm Steel tank obstacle in 1/16 scale. Need to use supports for proper print. Original format ones shoulder is 1800mm.
I printed all parts with Fillamentum CPE HG100, which i think is overkill and quite expensive. The ring to hold your bag is the only delicate part and should be printed with a tougher material (maybe PETG is alright). I added a V2 of the…
Might need supports for the rock head maybe not.
Small pet food bowl for my cat with some obstacles to slow down feeding. Works with kibble and wet food, forces your pet to slow down and lick around the obstacles for their food.
Die Playmobil Reitplatzhindernisse von meiner Tochter hatten mich bei dem Anblick der noch vorhandenen Strohhalme inspiriert hier eigene zu drucken. Ich habe Strohhalme mit einem Durchmesser von 8mm (Papier) genommen und diese auf eine…
This is my first attempt at making a fingerboard spot, I combined a lot of my favorite aspects of skating into one small piece. Any constructive criticism and tips are more than welcome. The ledge has been angled on one side to allow for…
small mount for sensor Category: 3D Printing
Print two bases, at least four sides and six poles. Or use the provided 3mf files. The tolerances are very tight, but some glue may be necessary to make it stiffer. I used this glue: https://amzn.to/4aoDkRE
I just recently bought mini golf carpet and decided to create an obstacle! This is 140mm wide x 200mm long with a 35mm tall ramp (5.5"x8"x 1.4"). Works like a charm! Print Settings Printer: BambuLab A1 Rafts: Doesn't Matter Supports: No…
Napkin holder in the form of a pair of crayfish/lobsters. I made this for a Swedish “Kräftskiva”. Print 2 sides + 1 bottom and glue them together. If you like it or even make one, please post it, like, share, and consider a Paypal…
¡Important! The 'Chassis-v5-Lid.stl' file has been updated to fix a small issue. RoverT is a free robot project designed to help makers learn about Arduino, sensors, electronics, and robotics . The robot features: A proximity sensor for…
I always found it annoying that one of the idler screws on the CORE One+ is obstructed by the automatic vent opening lever. With the standard Torx screwdriver, it's almost weird to reach the rear screw properly. Yes, a ball-end hex key…
This is a 7 piece dice set that can be printed and used to make masters and cast your own dice or you can just print them and play with them. This set features 1x D20, 1x D12 Standard shape, 1x D00 standard, 1x D10 standard, 1x D8…
Very useful lobster/crab claw chip clip! Comes in two sizes: medium, and large depending on which you need. Personally I recommend medium because that's the original size. *The clip might take some wearing in for it to work smoothly* For…
Created these holders to create small obstacle courses for my corgi due to dysplasia and vet suggested he can train his legs muscles this way. To build you need 2 of these and a broomstick of around 22mm diameter. Placed on different…
Konstrukce na zastřešení bazénu zimní plachtou , bazén pak nesbírá dešťovou vodu . Jestli bude fungovat napíšu po zimě . (dovětek 16.1.2024 při napadnutí sněhu si stříška lehla dovnitř , proti dešti super ,ale proti sněhu to musím doladit…
Kleine moderne Obstschaale
Yet another Focus knob ? Yes but this one lets the cooling air through! I found many focus knob on TI but all obstruct the important cooling air flow. Adapted for the 15mm Neje lens, but you can resize using your slicer... Also adapted to…
This is an obstacle-avoiding robot using 3 ultrasonic sensors. An obstacle-avoiding robot with three ultrasonic sensors (front, left, and right) works by detecting distances to nearby objects. When an obstacle is detected: Front sensor…
A Globster. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Benchy remix that acts as a sea monster
Designed to fit the CYMA CM.033 M1A1 Airsoft Thompson SMG. May fit other brands/models as many share the same design features. (Mind the mud on the grip in the photos above, field tested it to ensure quality for you, the end user!) Print…
Prevent your robot vacuum from climbing obstacles, getting stuck, or falling from edges. This bumper guard is designed to block the vacuum from riding up on objects such as drying racks, door frames, furniture edges, or thresholds. It…
