Liczymy pasujące modele…
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! F14 Tomcat This is another plane for your collection : the F14 Tomcat. This kit is…
A credit card sized kit card of the venerable F14 Tomcat I made for a friend. Everything should fit neatly. I tested on a Mini.
The Grumman F-14D Super Tomcat is the third and final variant of the F-14. The Tomcat is a supersonic, two-seat, Variable-Geometry Wing Fighter jet. Variable-Geometry Wings, more commonly known as swing wings, means the aircrafts wings…
F-14 Tomcat model with swept wings. The F-14 is known for its ability to sweep its wings. This gives it advantages in low and high speed flight, which it achieves by the angle of its wings.The F-14 Tomcat gained its fame in 1986 when it…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
F-14 Tomcat US Navy Fighter Jet (Made Horizontal For Less Support And Smooth Print)
A surprisingly big plane; it was the biggest plane on board until our world cruise when we had an EA-3 Whale ( Skywarrior ) that had a sign on the side "on loan from the Smithsonian". again, no load out or missiles. I understand that…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Thanks to @PhabulousPhantom's kit cards, my son and I are having fun making…
The Legendary F-14 A large carrier-based fighter that replaced the F-4 in handling fleet defense. Its striking twin engines and variable-sweep wings, along with its appearance in movies, has made it well known even outside of aircraft…
The F-14 is a two-seater twin-jet with variable geometry: it can “fold” its wings around pivots located in the apices connecting to the fuselage. It thus adapts its aerodynamic profile to conditions of transonic and supersonic speeds…
For Bluecurve, Helix, and Xfinity modems. Follow-up to my XB6 mount: https://www.printables.com/model/174485-arris-xb6-xfinity-wall-mount
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
F-14 Tomcat Display Control Panel
The F-14 is a two-seater twin-jet with variable geometry: it can “fold” its wings around pivots located in the apices connecting to the fuselage. It thus adapts its aerodynamic profile to conditions of transonic and supersonic speeds…
Only for those without M2 screws no other reason to print this instead of original. THE FIRST FILE HERE: https://www.prusaprinters.org/cs/prints/13780-mobius-kaleidocycle-box-kinetic-ring-box…
Remade the FlashlightBottomCap since the file is not there for this. I am making this for Christmas, so I needed it :)
Simple design for a wall mount for the Xfinity/Comcast XB7-T router. Fusion360 files included. Print in PETG. Supports for the screw holes.
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
Box to safely hold Tomcat Bait Chunx mouse poison bait. Designed similar to the Tomcat brand boxes to prevent larger animals and pets from getting the poison. The mouse is able to get into the box, eat the bait, and leave. I printed in…
SUPERSHELLS: Each supershell holds 12 darts and ejects for fast swaps mid-battle. Store 4 on the Nerf Rebel Ops Doom Cannon for instant access when you need to reload and re-engage. IMPORTANT — PLEASE READ BEFORE PRINTING Recommended…
Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No Infill: 10-20%
"The ultimate Cat" and the finest carrierborn fighter ever created. Beautiful F-14 Design by http://logic-wizard.art.coocan.jp/fms_e.htm https://en.wikipedia.org/wiki/Grumman_F-14_Tomcat Print Settings Printer Brand: Creality Printer:…
Easy to print, no supports, all bolts printable Idea Newly made dad who didn't feel like spending money again for a simple holder and also didn't wanted to drill holes in the wall The parts The clamp base 1x big 20mm bolt, easy turn-able…
EN - Description Wall decoration inspired by the F-14 Tomcat fighter jet. The model is designed as a flat decorative element. It is optimized for 3D printing without the use of supports. The multicolor design is achieved by changing the…
Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 10-20% Filament: AddNorth PLA
Thanks to @gristleking_151808 for providing the Step files for his Enclosure for the “MakerFabs V3 LoRa sensor” i was able to quickly adapt it to the b-parasite sensor which is similar in design and function, mostly reduced the height and…
The carrying case that comes with the breast pumps isn't very useful day-to-day, and they're round so they don't really stand upright unless you lean it against something. If you lay it on it's flat side, milk will spill out. So I made a…
F-14 Tomcat TACAN Control Panel
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Master Generator Control Panel
F-14 Tomcat Air Conditioning Control Panel
Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 10-20% Filament: AddNorth PLA
Pro všechny milovníky KCD2 jsem vytvořil model králíka, kterého pravděpodobně znáte ze hry. Pokud byste chtěli model zmenšit, doporučuji tisknout jej s 0,2mm tryskou, ale nemusíte nutně.…
F-14 Tomcat ICS Control Panel
Simple tool to close and open the duckbill valve for Momcozy M9 breast pump. After a few cleans and sterilisations the mechanism gets a bit stiff, making it uncomfortable to close and open by hand. This tool just slots on top and provides…
F-14 Tomcat Oxygen & Vent Airflow Panel
F-14 Tomcat Compass Control Panel & ARA-63
Created the Grumman F-14 Tomcat wall art model by creating a SVG file. Then importing the SVG file into Fusion360, then editing and creating the STL. Printed on the Creality Ender 3 Pro and the Creality K1. I am printing this on different…
Magnetic clipping Doomcube V2 top/bottom panel attachment that allows for panel installation after frame assembly. STLs already in print orientation. there is a 3.25mm bridge for the upper clips but should not require supports. Uses 32…
F-14 Tomcat External Environmental Control Panel
I have designed a wall mount for the Xfinity / Comcast HD cable box to be mount on the wall or even under a shelf. You can use the mounts in any configuration to suit your needs. I personally used the right & left brackets with the top…
F-14 Tomcat HUD-Video Control Panel
F-14 Tomcat Hydraulic Transfer Pump Switch Panel
Amidst rearranging my living room.. the wife decided she wanted to wall mount and hide all the stuff in that area.. so.. adapt and overcome. I did a quick search and didn't come up with anything. Maybe I used the wrong terms? The only…
This is for the Xfinity xb8 modem to allow it to be mounted to the wall instead of sitting on a desk or on the floor. Be sure to use support tree!
This 3D print is the emblem of the VFA103 Squadron of the US Air Force. 17x17cm | 6.70x6.70in Wikipedia link There are 3 files. One for each color. The pieces interlock with each other. There is not too much need to force the banners with…
The Breech Lock on the Tomcat has some play to it which can allow gas to leak if wiggled the wrong way. This shim tightens up the lock. Glue In place. precision matters! do a fit check and test first.
Magnetic box for 7 16x16mm dices. It designed for 8 3x2mm magnets. Link for dices: https://www.printables.com/cs/model/313836-kingdom-come-deliverance-farkle-dice-set
Detailní 3D model loga Kingdom Come Deliverance, vhodný pro tisk na 3D tiskárně. Ideální pro fanoušky hry jako dekorace,
A simple holder for the camera unit of the "Momcozy Baby Video Monitor BM01". Depending on where the bed is, you don't always have a surface nearby to put the camera on. So I designed this holder to be hung on the side of the baby's bed.…
its a model plane art to stick to walls
THIS IS A DETAILED MODEL OF A F 14 TOMCAT
The Momcozy milk warmer bottle opener, but only one piece so without the hard lock swiping it down.
Docks for Momcozy M5 breast pumps. Version #1: Upright Works with pump electronics attached or unattached, covers on or off Drip tray for spillage Version #2: Inverted Reservoir storage only Intended for drying or storage of extra pump…
screw connected more stable
I modeled my Bearcat SS and decided to provide the files for plastic parts so one can repair and revive a broken car. No files are providen for shocks or metal parts. ** EDIT : forgot to precise that Hirobo original screws are conical.…
just some shells I designed that are compatible with the Nerf Rebel Ops Doomcannon. Standard Front Loading Shell (no Dart Post) Rear Loading Shell (mainly for HalfDarts) experimental Halfdart Front Loading Shell - not tested yet…
This is inspired by the famous F-14 Tomcat and the F-24 concept from the ATF program. For those who don't know the F-24 concept is basically a naval version of the F-22 with variable-sweep wing. Unfortunately, it remained as a concept. If…
It is a magazine magwell for the tomcat where it can now take talon magazines. It is completely free for everyone and it will improve later on too. Expect more updates. It has a leaf spring instead of a normal spring catch for the…
Do you need more space on your changing table now that your baby is getting bigger? Consider giving this attachable shelf a try. Most baby wipe warmers should fit and the shelf can be mounted on varying widths of changing table trim by…
A replacement handle for the Momcozy brand baby gate model MCSSAM01 (now discontinued). Successfully printed and tested. I used 100% infill and organic supports. You can probably get away with less infill: the weakest part is definitely…
Wanted a nice stand for my Beretta Tomcat 32 acp. I decided to design it to hold 3 mags. These keep my safe organized. Please like, follow, and check out my other stands. If there's a specific model you would like a stand for let me know…
Use with M3x45 screws and Voron standard heat inserts (3x4x5)
Autodrom Slomczyn, Grojec, Poland, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
The helmet of the Future Ruler of Earth. Category: Props
Overview I created this model after wanting to dry some filament on the cheap and not finding any way to get a Severin OD2940 or Elite Gourmet EFD319 which are covered extensively by this OG model by @SJB4127 . The model that is readily…
A remix of the Parametric Dehydrator Filament Dryer by SJB4127 The sides were modified to fit a HOMCOM dehydrater bought from Amazon https://amzn.eu/d/03ERB4UE I lowered the side height to 80mm and added a lip on the top to allow stacking…
In case you are missing rubber gasket o-rings to complete comcloudway s True Fruits Drink Cap, print these in TPU.
no support needed the support is already incorporated in the model after printing the support should snap off on its own a little help may be needed. to attach the figure to the base just snap the figure in if you want a more permanent…
Simple shell for the XShot Ejector Shell I modeled on tinkercad.
Cobbled together in Tinkercad to put an extended 16mm barrel in a Dart Zone Tomcat. May need a bit of e-tape on both sides of the adapter to make it a tighter fit? Can't remember, been a minute since I opened up my tomcat. You may need to…
This model creates a replacement bracket for attaching the MomCozy water warmer bottle finger loop. The bracket often cracks from wear, so this is easy to slide into the TPU loop that comes with the water bottle. Assembly is easy, just…
If you lost ALL your mounting hardware for your Momcozy baby gate like me, you're in luck. Print one or print them all. Top mounting bracket has a functional release button, I used PETG-CF to preserve it's springyness but I'm sure regular…
king's tower fromclash royale
This cylinder replaces that dusty old 6 shot full length 50. cal cylinder with a 10 shot cylinder firing Mattel Boomco darts! Performance is around stock, but with my AF Desperado Full Upgrade Kit (found on Etsy.. for now..), this…
I needed to get my router off the ground and create space for more airflow. I designed this to fit with pegs under the router. The rubber pieces on the router are easily removable. The pegs go into the holes where the feet were. I made…
This is a A wall mount for Momcozy M9 Pumps. The file uploaded looks a little different then the one I printed. I since added a long cutout where the pump goes to prevent the seal from vacuuming against the printed part, and added a…
EN: Christmas led tree 1/ print all parts 2/ drill 1,5mm holes for wires 3/ insert wires 4 isolated(vcc), 4 unisolated (ground) 4/ solder black isolated wire to joined 4 unisolated (will go to push button) 5/ solder 100R resistors to vcc…
5 sectional beam pegs and 3 retaining pegs for a Loomcraft Sabina jackloom. I've included stabilizing rings just in case there's any adhesion or light bumping issues. Category: Parts
Simple two-color KCD II logo, printed with ams and color change.
Leveler for the Nomcore tamper on a Sworks step-down basket. Printed in ASA for heat protection, but can be done in PETG. Tolerances might be different for other materials because of different shrink rates. Created with Onshape, you can…
A mount to attach the Momcozy BM01 baby monitor to a 24mm bar on the Snuzpod 5, reusing the existing mounts that come with the baby monitor. Requires: 2 x 5x30mm wood screws (this is what I had, so I designed the base around this) 1 x…
Leds holder designed for Hirobo Bearcat SS designed for thos cheap led buckets you can find on aliexpress, ebay or amazon. Printed fronts in TPU (but PETG is fine as well as the part won't be too much exposed) and rear in ABS. All printed…
Printer: i3 MK3 Rafts : no Supports : Yes Resolution : 0.15 Infill : 35% Filament : ABS
Designed to work with the Momcozy M9 series breast pump bottles.
same as oifhrisks excellent opener, but now with magnet slots for putting it on the fridge! fits 18.5x9x2.5mm magnets (advertised as 20x10x3 available from dozens of sellers on aliexpress).
Just a little thing to prevent my cat from laying on my keyboard - esp while I'm working, for crying out loud
obrazek przedstawia kota próbującego zniszczyć choinkę the picture shows a cat trying to destroy a Christmas tree po kliknięciu pobierz będzie można pobrać angielską wersję after clicking download you will be able to download the English…
This is a flexible protective boot designed for the Momcozy Glass Breast Milk Pitcher . Since the pitcher is made of glass, this TPU sleeve adds a necessary layer of protection against accidental bumps, chips, or cracks when setting it…
I printed the fenders in a horizontal orientation with 15% infill and 4 perimeter layers without supports; and the brackets in vertical orientation with 30% infill, plus supports for the screw holes. PLA, PETG, or PCTG should work well.…
I made to promote my 3D printing business. If you happen to see me in real life and show me the coin I'll knock out a 3D print at cost. If you do this for yourself, don't use a clear resin.
This is designed for testing the function of this model, layer height 0.2 mm to 0.28 mm is recommended. Do not add supports to the articulated parts. Full model: https://cults3d.com/en/3d-model/game/hapi3d-flexirails-the-toronto-subway
A simple holder for the camera unit of the "Momcozy Baby Video Monitor BM01". Depending on where the bed is, you don't always have a surface nearby to put the camera on. So I designed this holder to be hung on the side of the baby's bed.…
obrazek przedstawia kota próbującego zniszczyć choinkę the picture shows a cat trying to destroy a Christmas tree po kliknięciu pobierz będzie można pobrać angielską wersję after clicking download you will be able to download the English…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
same as oifhrisks excellent opener, but now with magnet slots for putting it on the fridge! fits 18.5x9x2.5mm magnets (advertised as 20x10x3 available from dozens of sellers on aliexpress).
![#0033 [Remix] F-14D Super Tomcat Kit Card (no sprue)](https://media.printables.com/media/prints/266764/images/3300445_b2e2cdd8-6014-43a9-a0ec-5c6ffa4f28d1/rl-20230210-020.jpg)
