117 modeli
A classic-style phone frame decorated with Halloween themed ornaments. It can be used as a photo frame or as a halloween prank for friends. I created a simple animation that you can play on your phone and place in the frame or put there…
Wydruk około 5,47 €–6,68 € nettoWstępna wycena jednego wariantu
Give it to your sweet heart for valentine
Wydruk około 31,79 €–38,85 € nettoWstępna wycena jednego wariantu
Phone holder with wolf amblem. Works well both vertical and horizontal. There is a cable entry hole behind. Power bank fits well into the space below the phone.
Wydruk około 4,59 €–5,62 € nettoWstępna wycena jednego wariantu
We have an old garmin nüvi 2699 in our car. - Sometimes it is handy to use smartphone navigation… So I used the existing stand of the garmin which has a 17.1 mm sphere on its end to clip a holder for a huawei P 10 Lite on it. Would fit…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena jednego wariantu
A phone/iPad holder for the OrbitKey DeskMat. The module requires 4 magnets with a diameter of 15mm and a thickness of around 2mm. With this, I can put my phone easily. For an advanced hold(tablet), I glued a 10mm diameter and 2mm…
Wydruk około 4,42 €–5,40 € nettoWstępna wycena jednego wariantu
This is a mobile phone holder for the Samsung Galaxy S21 Ultra. Important: You need a Rhinoshield case for the phone to fit. Which I use: https://amzn.eu/d/fclKVRm You also need an M10 washer. You also need a magnet to hold the phone in…
Wydruk około 2,23 €–2,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A phone/tablet holder that looks like small euro palette furniture. !Note that the current version requires glue of some kind to hold together! A friction fit version will follow soon! The palettes are mostly modelled to scale.
Wydruk około 5,51 €–6,73 € nettoWstępna wycena jednego wariantu
Made for wireless charging pad from IKEA.
Wydruk około 6,00 €–7,34 € nettoWstępna wycena jednego wariantu
Easy-to-Print Smartphone Holder for Your Car -Simple two-part design -Requires only a few rubber bands and a car air vent -Compatible with a wide range of smartphone models
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
FIRST Team 4946 sharing their Phoneholder they are using for PowerPlay Season. It sits on the back of a modified Gobilda Strafer Chassis shortened to 5 hole crossmember on the robot. Also fit the standard REV Switch and this printable for…
Wydruk około 7,61 €–9,30 € nettoWstępna wycena jednego wariantu
HARRY POTTER PHONEHOLDER DEATHLY HALLOWS LOGO Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: eSun PLA+ anything you want Category: Mobile Phone
It's a cat that supports your phone
Deutsch: Ich habe das Model mit Fusion 360 gemacht. (Part 2 ist editierbar) Es wird zusätzlich eine Handyhalter für ein Kugelkopf benötigt. Kosten zwischen 2 - 8€ je nach Ausführung. Part 2 wird einfach in Part 1 Gesteckt, bei mir wurde…
A 3D printed clamp by AmptUp.org, that fits a standard Medline wheelchair and can also be clamped to most pipes for wheelchairs, strollers and walkers, vertically between 1/2in. to 1 1/4in. in diameter. It has a dovetail receptor for…
A Headphoneholder for the ikeas skadis. Designed to work with the skadis universal hook. https://www.printables.com/model/323748-skadis-universal-hook
It can hold phones in different sizes (tested with Pixel 4a with rugged case and iPhone 11 with …a big case). Sits quite loose in the tray to reduce the risk of scratches when inserting. A simple rubber band can improve the fit. Consider…
Designed this headset holder to be futuristic, clean, and nice-looking, while making it VERY EASY to print. This model requires less supports structures. I divided it into three parts and you can easily glue the pieces together. It fits…
Easily printable with no supports, you can even print it on feat without supports. It fits on any keychain.
The second version of my car phone holder. This time, the phone is held on by a small magnet. Why did I use a regular vent phoneholder? I hate these things, the car vents of my are moving up and down, so the holder get used up and at some…
A headphone holder designed to fit in the frame of a Secretlab Magnus Pro desk with USB for easy charging of headphones. The holder just slides in the end of the frame with a slight press fit replacing the original end cap. The design has…
Loved the idea of the phone holder with a horse just did not like that you get the back of the horse. So turned it around but then I noticed the neck of the horse was to long. So I changed the head en thus the neck and head are new. You…
Mount for your Oneplus 5 or Oneplus 5T in your car, to inject into your CD-Slot. Handyhalter für Oneplus 5 oder Oneplus 5T. Für den CD-Schlitz im Auto
This is a Support / Base for the Magnet universal Smartphone carrier https://www.amazon.de/gp/product/B0764FMDHJ/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter…
This Phone Holder is perfect for people how travel often because of it size.
This design builds on the awesome Bear Headphone stand from CyberDNS, but optimized for easy printing + standing free on a desk. Use organic supports for the snout. Adapt the scale according to your headphones. Printed mine on 122% scale.…
Headphonehanger for Deskplates with 19/28/38 thickness Printed with PLA. Works perfekt.
It is recommend to grease the “rails” that hold the pusher in place. For example the lubricant that comes with your prusaprinter does the job well :) All the parts except one can be printed supportless. But the support for the…
On the request of my niece, i made the letter "N" as a Keychain Phoneholder. Since i liked the design, i've decided to create the entire alphabet. Any question or feedback ? pls ask in the comments! Thankyou.
As i have two speakers in the doors, but didn´t have good place to put my phone, i used the place where the speaker in the middle once was. If you just need a cover for that, feel free to use the “blanko”-version. The phone version is…
Holds the Bicyclelight shape of the 520DX so it can be mounted on a regular microphone stand.
This sleek 3D-printed headphone holder is a stylish and functional solution for organizing your workspace. The design features a durable yet lightweight structure, ensuring stability for various headphone sizes. With its modern aesthetic…
Inlet for the great model of HribaDesign
So my original “hacked” Cutup cup holder decided to stop being useful. I decided I needed something that would hold both my phone and the ever important cup of coffee! this was my longest print at 26 hours with the supports. I have a…
I made this simple holder to keep my old phone in place on my printer. This way i can use it for timelapses and print surveillance via Octo4A ( https://github.com/feelfreelinux/octo4a ). I designed the holder around my old Google Pixel…
A phoneholder for the 8L (96-03) A3 Audi. It goes in the place of the blank button left of the hazard swith. Uses M4 and M6 screws and 12pcs 6x10x2mm magnets. Printed on a modded MK3S+ with ASA. 0,2 layer and custom settings
I printed this using AnkerMake M5 with their own PLA filament. I used 100% infill and 0.20mm layer height and supports. Print with large side on the print bed, file seems to be the wrong way by default. The thickness is 2mm everywhere…
Ich habe lange nach einem Halter für das Smartphone im Getränkehalter gesucht und nichts finden können. Hier ist also meine Version, ein Samsung Galaxy S23 passt inklusive Hülle sehr gut hinein. Integriert ist eine rückseitige…
i didnt print it because i retrofittet my car with android auto
Handyhalter Phoneholder gedruckt in PLA
Custom Drink & Phone Holder for Mini Cooper R56 – Functional & Stylish Designed specifically for the Mini Cooper R56 (2006–2013), this handcrafted holder combines smart functionality with a sporty look. Whether it's a Red Bull can or your…
This is a small modification of my original model with a better clip for the VWPolo6r and a MagSafe magnet. I used it for my OnePlusNord4 with a special MagSafe case. I also added two rings made out of noctilucent PLA to even see it…
smartphoneholder The smartphoneholder is designed to fit my Samsung A53 with open cover. Please adjust according to your phone. console mount / holder You can choose between 4 differnt angles for the holder/mount. 0° lets the…
This module is 1x3 sections big and fits seamlessly along the other modules. Print rightside up with no supports. The two bigger slots are meant for phones up to 13 mm thickness. The other slots can be used for cards/notes/paper
It replaces the phone holder for a Nokia with a standard plate into which you can insert your phone holder, as I did. You may need to drill the holes slightly larger, or you can simply remix the model. ASA or ABS is recommended.
if u make him 200% bigger its awesome on holding tablet too. works on height or on width.
based on the iconic Ministry of Silly Walks - Monty Python sketch
Material: PLA, PETG, or any rigid material. Available in 4 variants.
Weil ich keine Ablage für mein Smartphone im Auto habe in der es sicher liegt und in meinem Sichtfeld wäre habe ich diesen Halter entworfen. Einfach in den Getränkehalter des Autos stecken, der Durchmesser beträgt 80 Millimeter, als…
Pictures of the full print will follow shortly added a cover
Inspired by other models, i fullycreated my own for printing optimized smartphone holder. Print on side without supports. Due to the thin elements, a brim might be recommended. I would also recommend PETG to add a little flexibility to…
This is a magnetic version of my headphone holder for a magnetic wall or like me the metallic table legs of my desk. Simple design with a small logo. Perfect for headphones of any kind. Happy Printing and feel free to leave a comment or…
Just a quick remix to fit my phone with an Otterbox case Thanks to Kmejstr for the original. .2 Layer height No supports If you like, like. Enjoy.
I printed this using AnkerMake M5 with their own PLA filament. I used 100% infill and 0.20mm layer height and supports. Print with large side on the print bed. The thickness is 2mm everywhere except in the spot for the magnet that is 1mm…
I made this in fusion 360 and i paste a beatle model to the back Cre Ender 3 S1 Pro, 60mm/sec, Polymaker dualcol, 0,2 lh
The phone holder kit or upgrade for https://www.thingiverse.com/thing:4076981 The kit have both strait back and cupholder one. Please, design your own stand with this kit. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
A headphoneholder to mount on the left side of an 2024 Ikea Billy. Check out the original remix, there is a file so you can check if this holder will fit on your Billy without printing the whole model. I got some inspiration for the hook…
Use e.g. ABS 240/100C Note bit of gluing to make printing more efficient. Remix of https://www.prusaprinters.org/prints/79817-car-phoneholder-for-65-85mm-phones
This is a phoneholder that is intended to attach to one of these vent-clips for phones: https://www.amazon.de/-/en/Goldviver%C2%AE-Premium-Mobile-Accessories-Magnets/dp/B09YNVY4C6/ref=sr_1_11?crid=3V9VYNMKDXSPT I'm not using this exact…
The phone can be used both the driver as well the co-driver as the holder pivots -30,0,+30 degrees positions. Avoid need of the support the L&R brackets are printed separately and super glued. If you need change the length of the brackets…
An adjustable phone holder in 3 variants. Here the specs to all version: Small: 100 mm high High: 130mm high Both, the large and the small, have 4 100mm wide and 1mm deep indents for rubber feet to keep them from sliding. The phone holder…
I was looking for a phone holder for an my next vacation so i could watch a movie on the plane flight, found the one ZenziWerken made to be cnc/laser cut and wanted to see if i could make one that could be printed. added a little lip so…
PLA - 0,2mm Schichthöhe Kein Infill und Stützmaterial. !!! Dynamische Geschwindigkeit bei Überhänge, ist deaktiviert!!! Für schöneres Wände. Die Z-Naht habe ich nach unten oder hinten verlager, damit man sie nachher nicht sieht. Schau dir…
YAMPH Wall Mount Mobile Phone Holder Of course you can download *.f3d file and make your own remix in fusion360. Print slow can be a good idea, no need for support. PLA worked for me, but any filament should work. There are two versions:…
This model is designed to mount the OnePlus 10 Pro phone on a vertical board with a thickness of 40mm. It is ideal for mounting on a bed. There is a small clip on the side for the OnePlus USB-C cable. The 3MF file was created using…
Printed from Prusament Galaxy Black PETG.
This is my first ever 3D printable model. Recommended apps to use: Compass: NOAA mobile declination compass web app Trail Sense (if no internet) Inclinometer app: Clinometer Trail sense I think this alpha is good enough up to 120 second…
Simple holder for a tile or a phone that has a thickness of 10 mm
Tisch-Handyhalter(Table-Phoneholder)
Remodel of the original Volkswagen Transporter 4 / Eurovan phone holder cover plate. Can be used as: Replacement cover Base to combine with other phone case model (merged or glued) I printed it with PETG and glued it to a PETG print of a…
An adjustable phoneholder for the WaterRower Performance which sits under the Tabletholder. Max. hight Phone: 165 mm/6.49 Inch Installation: Unscrew the Tabletholder and place the Phoneholder on the threaded rod. Now you just have to…
Printing with PLA layer heihgt - 0.24 wall loops - 2 infill - 10% supports - normal(auto), style - snug
you need the 2 Screws from the Original to attach this too.
its a phoneholder which goes on to the back of the seat infront of you on the plane so you can watch a movie.
This Headphoneholder mounts easily to your perforated wall using a dovetail System. The holes in my perforated wall have a diameter of 5 mm, so I used an M6 tap to fix the headphone holder. If it should have another perforated plate, I…
On the CFMOTO 700 MT there was no way to use a clip/claw phone holder on the windshield bar. It was too slim and to smooth. I redesigned the bar what is basically adding thickness to the middle of that bar. So the connection points stay…
I used ASA for the main the brackets and the center holder and I used tpu for the insert in order to secure the phone better and make it a tighter fit
Smartphoneholder for Skoda CityGo, Seat Mii or VW Up TomTom Navi with space for MagSafe Magnet
This is the iPhoneholder 2000. Purpose: Mount the iPhone magsafe charger to the wall without glueing the charger to the wall. Have some distance between the phone and the wall to grab it more easily Tilted angle: More comfortable viewing…
PhoneHolder for Tesla Model S Mount your Phone in Style with this OEM / Premium Looking PhoneHolder unlike most PhoneHolders this one does not use Glue or Stickypads but Existing Mounting Hardware inside the Car. UPDATE : V2.2 For an even…
Fits on 20mm thick Wood. Testet with big Phones such as iPhone 14 Pro Max
Inspired by: https://www.printables.com/model/43645-magnetic-headphoneholder/files No support required.
a remake of my older model
My first design I ever did. If you like to, check out my other designs too!
easy fast printing model that keeps your place tidy :) ~printed with PLA~
0,15 mm layer height 0,4 mm nozzle printed with supports printed out of PLA
Headphoneholder for corners and edges. The name can be added to the front. Glue can be used to attach. Can be printed without Support. https://www.tinkercad.com/things/aB7GoBfwJB0-kopfhorer-halter-ecke…
Dont use this v2 is better HerGiz asket for it
The phone holder made for Hammer energy II also fits other phones of a similar size
this is a headphone holder with a screw
Mounting plate to aligne the nice phoneholder from @RCHeliGuy_95859 on the edge to an 3030 extrusion, you need two Ruthex M5S to mount the phoneholder on the plate, the plate itself has two 8mm holes, so M8, M6(incl. washer), M5 (incl.…
a phone holder made to clamp on by me, a 14 year old kid (i havnt printet it so i cant garanti det works)
Sry for the low resolution images.
a protector is also included to protect your shelf.
Parts list : 1x BackPlate 1x FrontPlate 1x Sled 2x Arm Optional: 1x weak rubber band Printing instructions Recommended print settings: Nozzle: 0,4mm Layer height: 0,15 mm Material: PLA, PETG or Higher quality material Recommended print…
This model can be used for preventing your tablecloth to be blown away from your table and/or to hold your phone.
The inner size is 76 x 13 mm. here are some scaling tipps if you have an other phone iPhone 6 and Samsung Galaxy S6 you can print at 91% scale iPhone 6 plus print at 105 % Samsung Galaxy Edge print at 95 % THIS VALUES ARE FOR THE PHONE…
![Magnietic Phoneholder [Fusion360 Parametric]](https://media.printables.com/media/prints/599801/images/4775671_11a9acf3-8ba4-4e98-8cf4-76dd5215f4e9_1e527673-1416-4dff-bcbb-d76470111418/a.png)
