Wyniki wyszukiwania: pms

BYD Sealion 7 - Cover for DPMS (Driver Assist System)

Print it with TPU and it will not scarf your camera window. It holds itself without the need of any glue or doublesided tape.

Coral Reef TPMS LED Lamp Hydesign

Introducing the LED Lamp featuring a TPMS lattice design that brings a coral reef-inspired feel to your space. Inspired by the natural beauty of marine life coral reefs, I used traditional CAD software and HyDesign software to create this…

Crosman DPMS SBR Suppressor Concept

This piece is currently a work in progress as I have not finished printing it or tested it yet. NOTICE: This suppressor is intended only for use on BB guns / Air Rifles. This in no way is meant for production for or use on actual…

PMS5003 / DHT22 (or BME280) / ESP32S Air Quality Sensor case

This custom-designed enclosure is tailored to house the Plantower PMS5003 Air Quality Sensor, along with an ESP32 NodeMCU and a DHT22 (or BME280 when using the alternative lid included in the files) temperature and humidity sensor…

ESPHome Air Quality Sensor Housing (PMS5003 / DHT22 / ESP32 - Remixed for ESP32 DevKit V1)

What is this? This is an enclosure designed to house an ESP32 board (specifically, an ESP32 DevKit V1 board), a PMS5003 sensor, and a DHT22 temperature/humidity sensor. It's powered through the ESP32's micro USB port, which is exposed on…

BambuLab A1 PMS (Purge Management System)

This is a remix of: https://makerworld.com/en/models/91768#profileId-98168 The original design is super cool so make sure you check it out. I have no current interest in multicolour printing so I didn't need a huge purge bin. I decreased…

Tire Valve Cap and TPMS O-Ring

If you've already downloaded it, please resize the cap to 10mmX10mmX14.29mm. If you haven't downloaded it already, I have uploaded the correct size. My Bad. Remixed muzz64's Tire Valve Cap. I removed the MakerBot logo, added a dome top,…

DPMS LR-308 Brass Catcher (NO SUPPORTS)

TPMS lattice Cubes

A collection of TPMS lattices made with the original functions of these shapes for SLA. Not meant to FDM print but if you have any issues feel free to contact me. Update: Now added more detailed generation of these TPMS surfaces are big…

PMSM, Prusa Mini Superpinda Mount

I was looking for something smaller for mounting the superpinda. Lower screw threads into the plastic. If you use a longer screw it can steer on the lower hole of the fan.

AIRSOFT PMS AK-12 SUPPRESSOR

40% infill or More PLA + or PETG

Altermotor: Alternator to BLDC (PMSM) Motor Conversion

Want an electric gokart motor, but don't have $500+, and all you have is an old, busted alternator taking up space in the garage? Well, I have news for you! Take that chunk of automotive/E-waste and turn it (and about $60 worth of parts…

head(amame) v2 Gyroid TPMS Lattice Cones

TPMS Gyroid open-back cones for the head(amame) v2 3D printed headphone kit . I designed these cones to be compatible with single extruder, dual extruder, and multi-material 3D printers like the Bambu X1-Carbon. Each part is available in…

Outdoor enclosure for PMS5003 Particulate Matter Sensor

I needed an enclosure for the the PMS5003 Particle sensor that would meet my needs: slanted roof so rain/moisture rolls off mesh covered inlets to prevent critters from making a home inside anchor points for screwing into a pole / wall…

BLDC PMSM Concentrated Helical Toroidal Flux Motor

This is a model for a motor idea that I had, but modeled in such a way that you can play with different configurations. You can use different winding strategies, like toroidal and toroidal helical. You can even get the stator cut out of…

PMS5003 + D1 mini pro box

Box with lid for my PM2.5 monitor with PMS5003 and D1 mini pro

Enviro+ and PMS5003 frame

About Designed for environmental monitoring, Enviro+ for Raspberry Pi lets you measure air quality (pollutant gases and particulates), temperature, pressure, humidity, light, and noise level. When combined with a particulate matter…

Air Quality Monitor - AQI PMSA

Build a compact air quality monitor with 3D Printing and CircuitPython. Guide: https://learn.adafruit.com/aqi-case Powered by the Adafruit Feather ESP32-S2 Reverse TFT and a PMSA003I air sensor, this build can monitor air quality in real…

PMS5003T / WeMos D1 mini V4.0 - Air Quality Sensor case

Used Hot Glue to keep components in place

Bambu Lab A1 - PMS - poop purge chute

Glue in 12 6x2mm magnets ‘’secure to the A1 printer using VHB tapes (or similar mounting tape that is 1mm in thickness)'' Use any poop deflector of your choice, I've had nothing but success with the original design's one. Don't forget to…

PMS7003 mysensors enclosure

Mysensors node for dust mesure. More info on my website: http://hamspirit.pl/SQ9MDD/?p=2077

Pico Enviro+ with PMS5003 Case

This is a case for A pico enviro+ with a PMS5003. it takes four 3mm heat inserts and M2 x 3mm Full Thread Cap Head Screws and two wall screws to fix it to a wall.

Honda CB500X adapter bracket for TPMS

A simple bracket to get a flat surface for mounting an TPMS display. You need to replace the original screw with a longer one, a M3 30mm should be fine. Turn it 90° and print on the side, so you won't need any supports.

head(amame) v2 Gyroid TPMS Lattice Cone WITH MICROPHONE

Dirty modification of Andrew Sink's Head(amame) cones to include the microphone jack

stands IPMS Gunpla & Mecha UK SIG

This is a stand I made for the IPMS Gunpla & Mecha UK SIG. Comes in 1/144, 1/100 and 1/60. the 1/144 and 1/100 are compatible with action base arms. The 1/60 is so large you will need a cr-10 to print. the 1/144 comes in 2 parts to fit…

Outdoor Enclosure for Plantower PMS5003 / WeMos D1 Mini

Remix of rainbow_wheez3's outdoor enclosure for the Plantower PMS5003 Particle Matter Sensor https://www.thingiverse.com/thing:4581351 I wanted a bit more wiggle room for the WeMos D1 Mini control board and cables. This is part of my…

Toyota 4Runner TPMS Stem Guards

Prevents damage to the valve stem from loose rocks. OEM valve stems can be easily damaged. OEM TPMS sensors are one piece and stem replacement is impossible without replacing the entire sensor. This cap directs the force from an impact…

Plant Pot TPMS Lattice HyDesign

Enhance your home decor with this geometric plant pot, featuring a stunning TPMS (Triply Periodic Minimal Surface) lattice structure designed by Hydesign. This unique pot combines modern aesthetics with intricate design, making it a…

VW/Audi TPMS Antenna holder

This is an holder for the antenna (calculator) of the direct TPMS for VW/Audi cars. Best use is when you retrofit the direct TPMS system. Like this no need to put the antenna in the rear bumper as OEM, you can put it in the trunk next to…

TireLinc RV factory TPMS repeater dock cover

Covers which fit a popular factory installed RV TPMS repeater dock. The base dimensions are roughly 3"x2.6". There is an 18 degree cover for docks installed at an 18 degree angle so the top face can be vertical. There is a 0 degree cover…

Case for airquality sensors BME680 and PMS5003

Use WEMOS clone ESP32 D1 mini to control PMS5003 and BME680 sensors. Both are included in Tasmota all sensors. 2 cases included: one WEMOS ESP32 and with both sensors and one with WEMOS ESP32 and BME680 only.

PMS5003 Air Quality Sensor Case

This is the 3D-printed case from my build of a local PM1.0/PM2.5/PM10 air-quality sensor that reports straight into Home Assistant via ESPHome – no cloud, no app. What fits inside: - ESP32 DevKit - Plantower PMS5003T (particulate matter +…

HyDesign TPMS Wave Coaster

Add a touch of modern elegance to your table with the Hydesign TPMS Wave Coaster. Featuring a dynamic TPMS (Triply Periodic Minimal Surface) lattice structure, this coaster brings a flowing, wave-like pattern to your decor. Features:…

WeatherDuino AQMIII Plantower PMS7003 indoor case

This is a 2-part indoor housing for the WeatherDuino Air Quality Monitor III with Plantower PMS7003 SPS30 for particle measurement, MH-Z19 for Co2 measurement and 1.3 inch OLED. You can find information about the WeaaterDuino here:…

an 8020 series 10 mount for an Adafruit PMSA003I Air Quality Breakout

An 8020 series 10 mounts for an Adafruit PMSA003I Air Quality Breakout. The holes are taped for a M2.5. The sensor can be found at: https://www.adafruit.com/product/4632 Category: Electronics

HyDesign TPMS Ripple Coaster

Elevate your table setting with the Hydesign TPMS Coaster. Featuring a meticulously crafted TPMS (Triply Periodic Minimal Surface) lattice structure, this coaster showcases a honeycomb-inspired pattern for a contemporary look. Features:…

TPMS Wrench

I needed a wrench to grab the bottom of a Lippert TPMS sensor The kit came with a wrench, but I didn't have it handy Here is a model, so you can print extras Printed in PLA with very basic settings, there should be enough clearance so…

Snapon TPMS3 docking station support

The Snap-on TPMS3 docking station breaks down into two pieces for storage purposes. The rear support was lost for the one I have. I designed this simple part so now I can charge the unit. I would orientate the part to be printed as it…

TPMS Protective Case

This is a protective case that I made for the TPMS system that I use on my camper. The case has space for all 4 TPMS valve stem caps, the display, the wrench and nuts that come with the sensors, as well as some extra space for some…

A Din Rail mount for an Adafruit PMSA003I Air Quality breakout board

A Din Rail mount for an Adafruit PMSA003I Air Quality Breakout. The holes are taped for a M2.5. The sensor can be found at: https://www.adafruit.com/product/4632 You will need to print one tab for this design. They can be found at:…

CAREUD TPMS Cap Removal Tool

Tool for removing CAREUD TPMS cap when replacing the battery.

universal rectangular gauge pod / bezel for TPMS

Do you have a rectangular switch, gauge, or display you want to mount in your car, but no convenient place to mount it on the dashboard? Did you cut a hole in the plastic dash only to realize like an idiot that there was metal structure…

Jansite TPMS Srcreen Bracket

I use this to monitor my tire pressure while towing my camper:…

PMS7003 + DHT21 Air Quality Monitor with 3.5 inch TFT Display (Arduino UNO)

This project is an open-source air quality monitor featuring two highly reliable sensors: PMS7003 – Laser-based particle sensor for measuring PM1.0, PM2.5, and PM10 levels with high accuracy. DHT21 – Digital temperature and humidity…

Pico Enviro+ with PMS5003 and additional sensors and battery

A case for the Pimoroni Pico Enviro+ and PMS5003 particle size sensor along with an additional space for more sensors such as the SGP-30 sensor also sold by Pimoroni, as it is designed with inserts you can create your own plate for the…

Figures PMS Tank Escape from Tarkov

Figures PMS Tank Escape from Tarkov

Adafruit PMSA003I support

Pairs with https://www.adafruit.com/product/4632 to support the PCB.

TPMS bracket for Golf Mk7.5

The Volkswagen Golf Mk7 or Mk7.5 does officially not come with direct TPMS (RDKS). To retrofit this option, you need to mount the sensor under at the bottom rear side of the vehicle. I chose to mount it on the left rear bottom side of the…

PMS Varning

Made this one for my PMS sensitive girlfriend

bloack clapms

fdfasffafasf

TPMS Silencer Case

This is a case for the TPMS Silencer PCB. https://www.tindie.com/products/gcormier/tpms-silencer/ Category: Electronics

TPMS senzor Mount

Mount for TPMS senzor

Air Quality Case ESP32C3+PMS5003

Case for DIY project Air Quality Sensor ESP32C3+PMS5003

Pico Enviro+ with PMS5003 Case

This is a case for A pico enviro+ with a PMS5003. it takes four 3mm heat inserts and M2 x 3mm Full Thread Cap Head Screws and two wall screws to fix it to a wall.