Liczymy pasujące modele…
These models were created using Fusion 360. These models Allow you to add extra tobacco and tubes with the Powermatic 5+ Powermatic machine will need to be opened up and modified so you can keep tobacco door open while using the machine.…
I tried all available clip designs and found that flyin_kapet's “Notch” version worked best. These are a simple revision of his design that doubles and triples the capacity. You do need to push the pellets into the center of the clip with…
I designed a tray for the Powermatic 3 that works for me. Printing needed 17 houres at 0.2 layer height an 15% infill, speed 50 mm/s. This model was printed on an Creality CR6-se an fitted jus on the buildplate without a skirt or brim.…
My 4iiii Precision Powermeter battery cover cracked, so I designed and printed my own. I used a layer height of 0.08mm for the cover and the O-ring. I printed the cover in PETG and the O-ring in TPU.
Bobble the head of your favorite Autobot Leader! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of my son's model for a…
This model is a snow blower engine kill switch key. Most snow blowers have a plastic key that prevents the engine from running if the key is missing. The manufacturer key does not have a hole to put the key on a key ring. This key fits…
This is a wall mount for a Metabo PowerMax BS cordless drill. It allows to quickly access the drill by grabbing its handle.
⚠ WARNING ⚠ This bit holder is intended to be mounted near the motor. I’m not sure how much placing a permanent magnet near a DC motor would affect its lifespan or efficiency, but I guess it's better to pick the magnet that's not too…
This is a bit holder for hex screwdriver bits for the battery of the Metabo Powermaxx cordless screwdriver. It may also fit for other Metabo tools using the same batteries. There are two versions, one is for the 4 Ah battery, the other…
Handle for the Gardena electric lawn mower PowerMax Li-18/32. This can be easily used as a spare part for the old handles which will break after some time. The replacement is very easy. I printed the part in PETG and with a modifier of…
Working basis for the American machine fill hoses cigarettes Powermatic II. The base includes the housing for the machine, the support for the tool including with Powermatic, support for the jar of tobacco. The latter is possible to…
The Loc-Line 80813 Shop Vacuum Kit (I'll let you search that part number) is a great way to add dust collection to a drill press, but the mounting bracket is a bit flimsy by itself and there isn't really a good way to mount it directly to…
You need 2 colors of PLA filament 1 608ZZ ball bearing : https://www.amazon.fr/gp/product/B07S3SZZST/ 9 magnets ( https://www.amazon.fr/gp/product/B075FL7FVS/ - small size) 2,7mm height - 6mm diameter Loctite super glue Tape No support…
Logos for Powermatic, Proto, Rikon and SawStop. Let me know if you're looking for a particular logo and I'll try and get it for you.
Inspired by https://www.printables.com/model/227397-portable-drill-guide , I modelled this drill guide matching my Metabo PowerMaxx SB from scratch. Properties: Max. drill diameter 4.5 centimetres Max. drill length 16 centimetres Base…
Powermatic 5 Station with 2 drawers, left one is for falling cigars adn the right one is for your cables brushes and other equipment. The left drawer has 2 magnets that hold for 2 magnets on the base so less tobacco would fly outside of…
Edit: All parts are at 0.1x scale in mm due to fusion 360's exports being funky. Files will be updated soon. This is a conversion kit with enough parts to turn a Powermac G3 into a sleeper gaming/workstation PC. There's a few things to…
FOR METABO LC 40, 10,8 В, ЕС (627064000)
Fan grill for a 120mm fan based on Apple PowerMac G5 / Mac Pro (2006-2012) design. Perfect for a PowerMac G5 case converted to ATX.
There are two files, one for the actual TPU seal and the other for converting an 11/32 ¼" hex socket into a removal tool. The printed insert is just a guide - it is very difficult to do without it. FreeCAD files are included so you can…
A simple tray to catch tobacco crumbs. It fits into a recess and therefore cannot shift.
I made this as a replacement for my bandsaw because the replacement costs 30 dollars on the powermatic website. using prusament PLA it costed me 21 cants to print and took about 40 minutes. can for scale.
This is a custom-designed battery charging holder for cordless tool packs such as those used in drills, screwdrivers, impact drivers and other power tools. Many tool batteries come only with a cable-style charger , without a stand or…
Model of a screw for an HDD inside the PPC G5
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the…
I needed a new motherboard tray so I designed one. The dimensions are set to the size of my Asus TUF Gaming B550M-Plus WiFi motherboard. To use this, you have to do the spring mod, so that your case opens and closes by pushing in the rear…
Not identical, but serviceable replacement for part 00057-77.279.02 Printing PETG No brim or supports 5 perimeters and layers 25% infill
Bit holder Metabo for back panel. Designed for magnet size 10x20x4 mm Print Settings Rafts: No Supports: Yes Infill: 30% Filament: Flex TPU Category: Tools
Works best with PETG 30% infill or greater. Print upside down for best results. Don't use PLA.
I made this vent to allow more airflow for my Apple Powermac G4 case. I'm running a Ryzen 9 3950x with a 280mm AIO. It makes the case appear as if someone had just hit the eject button. I used a honeycomb design for the vent, reminiscent…
Printed whit Trideo T-500. Specs 0.6mm nozzle 295 nozzle temperatura 110 bed temperature 80 chamber temperature 0.20mm layer height 50% infill 4 perimeters Suppor on build plate
I made this vent to match the CD drive vent that I made for more case airflow. This zip drive vent is held in place by 2 M3.5 screws, I happened to have m3.5x8 on hand but shorter should work no problem. I have removed my drive bays to…
Wanted to mount my GoPro on my bow for hunting. This fits the third hole down on the riser of a Hoyt Powermax. As you see in the pictures it screws together decently. The parts shown are the prototype parts in PLA. I would suggest using a…
This is a remix of GutBomb's "BlueSCSI v2 5.25" PC Drive Bay Mounting Bracket" to work with the original PowerMac 6100 CD (tray or caddy) front panel. I used OpenSCAD to move the mounting of the BlueSCSI up by 7 mm so it fits inside the…
You need 4x M3 Screws per Drive to Slot them in. I reimaged the original G5 Drive Mount
DE: Einfacher Halter für einen Metabo PowerMaxx BS Quick (10,8V). Schraubbefestigung durch zwei gesenkte 5mm Bohrungen in der Montageplatte. Gedruckt mit Support für die Schraublöcher (geht vielleicht auch ohne). EN: Simple holder for a…
Simple holder for the Powermatic 1250 air filtration unit remote and cleaning brush. Attach with double-faced tape (wherever you like, I attached mine on the inside frame). Printed with PLA (In retrospect I might re-print in another color…
A shaft seal gasket for the Powermate Powerwinch model 501 The seal has an ID of ~90mm(~3.5"), OD of ~114mm(~4.5") I printed this because I couldn't find the part online and the closest examples cost over $20 with no assurances that they…
Didn't find anything for this so i had a crack at making my own, it's not perfect but it works well enough. I used 6 perimeters with a 30% infill and it feels pretty solid, I've left the mount blank without holes so you can create your…
Infill to 10% this will fit the Electrolux Powermix Silent blender lid center. Support my work and suggest new designs, buy me a ko-fi! https://ko-fi.com/cocoalopez For more of my work visit www.cocoalopez.com
asmota Description Smartmeter: https://tasmota.github.io/docs/Smart-Meter-Interface/ You need: i.e.: Wemos d1 Mini…
USB power meter from manufacturer Hidance HDC 085C The case has a magnetic closure (2 magnets with a diameter of 8mm x height of 3mm) When printing in place, set the print stop and press in the magnet. USB-Leisungsmesser des Hersteller…
materiál mosadzná vložka M3 10ks motor 28BYJ-48 DC 5V 2 ks arduino nano 1ks endstop 3ks Fotorezistor 1ks led 1ks rezistor 10kΩ 1ks skrutka m3x16
This mount can be used to attach an ESP32 with an photo resistor to the powermeter Easymeter Q3M. I glued in two 10x2.5mm magnets to attach the mount to the powermeter which already features a metal ring around the IR diode. I provide all…
Replacement eject button for Power Macintosh 7000 series computers
this part is printed sideways, with supports. nozzle 0.4mm layer height 0.1mm PETG is best.
To be able to store my Bosch PowerMore range extender accu next to my eBike charger, I created a wall mount for it. It can be installed vertically like you see on the photo but also a horizontal mount is able as long as you respect the…
Zigarettenstopfmaschine Powermatic 1 Zigaretten und Tabakauffangschale Effizienz und Sauberkeit beim Stopfen von Zigaretten neu gedacht Die Powermatic 1 gehört seit Jahren zu den beliebtesten Zigarettenstopfmaschinen, besonders für alle,…
Take Grab it and Mix to the next level. PowerMix Go Multifunctional Grip Handle : Power, Grip, Phone Stand, Cable Organizer — is an multitool accessory for the Hercules DjControl Mix. This all-in-one accessory enhances your mobile mixing…
Made these for a Powerman 5000 show a few years ago. I threw them out into the crowd as goodies from one fan to another. Had actually brought a silver sharpie with hopes of getting an autograph but that fell through. Print the model with…
Halterung für Aideepen DC 50V 5A 250W Digital LCD Voltmeter Ammeter/Powermeter https://www.alibaba.com/product-detail/Aideepen-DC-50V-5A-250W-Digital_1600587970085.html for fitting into top viewed battery department - for devices that are…
Please read the description carefully. Unfortunately, this model isn’t perfectly optimized for 3D printing. It requires supports for handle and case feet. But overall, it serves its purpose. To assemble it, you will need 2 long pins, 2…
Vytištěno z PETG s 50% výplní.
This is a pretty simple enclosure for a Drok powermeter ( https://www.amazon.com/gp/product/B07YC1XHKQ ), requires qty6 #4 screws It is designed to accommodate PG19 cable glands ( https://www.amazon.com/gp/product/B077R1RT2T ) with 12awg…
My Powermatic Table Saw motor control had a STOP switch that was hard to find and hard to hit when I wanted to turn the saw off. Current saws have a large STOP switch that's easy to find and hit with your hand or leg. So I replaced the…
This is a holder for three Griffin PowerMate knobs. I use them for video editing controllers in Premiere. Category: Computer
If you own one of these NEC PowerMates your hinge has probably broken out of the plastic standoffs. I decided to create a replacement bracket and do preventative steps to prolong the life of the new hinge. Disassembly There are two screws…
print PLA with Support
Valve seal for Coleman Powermate air hammer 024-0075CT This is the stupid space-gun design with the red plastic trigger (see photo), not the prior common design with a pivoting trigger. This file may be able to be adjusted to fit other…
Doing a G5 Mac Pro conversion and needed to be able to fit a standard C14 panel mount power plug socket such as https://www.amazon.com/Panel-Adapter-Connector-Socket-MXR/dp/B07DCXKNXQ Into the C19 socket left behind after pulling out the…
100% infill Supports Enabled Hardware: 5/16 X 33.5" hex bolt, 5/16 Nylock Nut, 2 8mm Flange Ball Bearings
I printed the original Powermac G3 slide lock, which is a very nice model, but it didn't quite fit my PowerMacs. I compared it to an original I had and made some modifications. Note that I printed at 100% infill for the part's strength,…
Print with 100% infill Enable supports Reuse original Powermatic screws + M3 X 30 for hinge + 3X12mm Magnet
Print on side with tree supports enabled
Fan grill for a 120mm fan based on Apple PowerMac G5 / Mac Pro (2006-2012) design. Perfect for a PowerMac G5 case converted to ATX.
This is a remix of GutBomb's "BlueSCSI v2 5.25" PC Drive Bay Mounting Bracket" to work with the original PowerMac 6100 CD (tray or caddy) front panel. I used OpenSCAD to move the mounting of the BlueSCSI up by 7 mm so it fits inside the…
Edit: All parts are at 0.1x scale in mm due to fusion 360's exports being funky. Files will be updated soon. This is a conversion kit with enough parts to turn a Powermac G3 into a sleeper gaming/workstation PC. There's a few things to…
Print with 100% infill Enable supports Reuse original Powermatic screws + M3 X 30 for hinge + 3X12mm Magnet
The Loc-Line 80813 Shop Vacuum Kit (I'll let you search that part number) is a great way to add dust collection to a drill press, but the mounting bracket is a bit flimsy by itself and there isn't really a good way to mount it directly to…
Upgrade für Powermatic 5 und 3 Zigarettenabtrenner. Einbau ist ganz easy, kein Löten und zusätzliche Motoren nötig.
Tisch mit 2 Schubladen Tabaktrichter für ca. 200 Zigaretten Auffangschale für ca. 200 Zigaretten verbesserte Hülsenfront, kein Hülsenstau mehr Hülsenturm für ca. 250 Zigaretten Tabakrüttler zum ankleben Zigarettenabtrenner mit…
“At the end of the day, what is that really doing if you’re not following up?” he said. “So this is a follow-up. The follow-up actually being boots on the ground, organizing in communities that actually need it, feeding people who can’t…
