Liczymy pasujące modele…
Overview A compact desktop housing for the common 16 mm, M12x1 thread momentary push button (the red-cap style). The base snaps on without screws, a hidden magnet holds it to steel surfaces, and the cable enters at an upward angle to keep…
I printed this clip with support for the overhangs using a 0.2 mm layer height. This caused the vertical gap that provides flexing—the part that secures the clip into the existing hole of the PTT button—to almost disappear, but it still…
Removed volume guard added PTT lockout 3 styles I found out that the AR-5RM models have a very touchy PTT and I couldn't find a suitable model to print so I modified this one edit 3/26/2026 Added 12 variations Added a cage and a full…
I mount my radio inside the Admin pouch of my chest rig accidental activation of the PTT or changing the volume on accident is annoying, this guard prevents that. Design reuses the mounting holes and screws for the belt clip on the rear.…
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 3,5 hours. (with MK4 input shaper feature enabled) Slicer settings: 0.2mm layer height, 4 perimeters, 40% infill Post processing instructions: Check…
Transforms your hand-held PTT into a desktop mike. Use a small adjustable tripod and a ¼-20 UNC threaded insert. Heat press the insert in its matching hole, wait for it to cool, screw the part on the tripod. Use CAT, RTS, DAKY to trigger…
Small breakout box for microphone and PTT on a Yaesu FT-991a. Find the foot switch here: https://www.printables.com/model/1085953-foot-pedal-switch-usable-as-ptt I also added (my) electronic schematics. Thanks to DL9NBJ who shares his…
Small foot-operated switch which can be used multi-purpose, e.g. as PTT for a ham radio. Connected to whatever endpoint by a “simple” mono audio cable (guitar cable). Unfortunately, the jack i used in my first version is no longer…
Mr Fox was recently gifted an old bakelite telephone with a broken rotary dial and modelled a replacement part.
This is a non-functioning PTT button replacement for the Baofeng UV-5RM series radios so non-licensed users do not have to worry about accidentally transmitting while using the HT. To replace your button, use a small screwdriver or knife…
I sliced the model “laying on its back” in the orientation where the radio would be facing up. There may be a better way to slice it, but I think this gives it the most strength. Supports were moderately difficult to remove, so you may…
I printed this clip with support for the overhangs using a 0.2 mm layer height. This caused the vertical gap that provides flexing—the part that secures the clip into the existing hole of the PTT button—to almost disappear, but it still…
I suggest to use the new Prusa Slicer Fuzzy surface for the grip section. It makes them really grippy and look even better. See last image. tl;dr You probably want the version with the square trim button. There are version with right,…
Designed for use with a 2-wire round telephone cable. R13-507: 16mm diameter button DS228/DS428: 12mm diameter
This box allows you to use a network cable (front connector of the FT-891) and connect an external microphone and PTT. A 1/4-inch (6.3 mm) PTT connector is used for compatibility with Heil Sound Hand Switches. A 1/8-inch (3.5 mm)…
GME radio Push-To-Talk PTT Bluetooth button to Quadlock mount adaptor. 2 pieces that thread together to encase the PTT button which can then be mounted to a Quadlock phone mount. The top part can be printed without supports, but supports…
Removed volume guard added PTT lockout 3 styles I found out that the AR-5RM models have a very touchy PTT and I couldn't find a suitable model to print so I modified this one edit 3/26/2026 Added 12 variations Added a cage and a full…
Persistent System MPU5 PTT To make a cnc replica or use any ptt or electronics to make it function Category: Sport & Outdoors
PTT button for ham radio headset, for example Heil headsets and use with 6.3mm audio jack. To build the following is needed: 2 x 2.5mm ca 10mm screws 1 x 12,2mm button off-(on) 6.3mm audio jack 50cm data cable 8x0.25 Prints best in PETG…
Have you ever had the problem that you printed a wonderful model of the Flaptter but you couldn't display it in flight?! Do not be afraid, I got you covered! Using this display stand enables you to pose the wings in action. The design of…
Inline PTT for Yaesu FT‑891 This project describes how to build an inline Push‑to‑Talk (PTT) unit that integrates directly with a headset for field‑portable radio operation. The goal is to reduce the number of cables, adapters, and parts…
This is for the metal cased UV-K1(8) that comes with a hard plastic PTT button cover that is blue and black, not the soft rubber PTT button found on other uv-k1 variants. This version is a simple stepped texture that matches the profile…
This is for the metal cased UV-K1(8) that comes with a hard plastic PTT button cover that is blue and black, not the soft rubber PTT button found on other uv-k1 variants. A flat topped PTT button that can be easily customized for call…
Label for Clipline PTTB terminal blocks. Here are the specific terminal blocks in the photos. Adjust to whatever number of contiguous blocks you need labelled by adjusting the NUM_BLKS parameter in the OpenScad file.
Yaesu FTH-7010 UHF FM Transceiver PTT button Material : Filament PM TPE 88 RubberJet Flex 1 permiter no support 10% infill
PTT retainer for attaching your Nexus or U-94/A PTT to any molle section. Must be printed in TPU or other sufficiently flexible filament. Simple, fast and easy to print. Two variations available to mount the PTT either horizontally or…
Update 2 Dec 2020: A more robust locking clip MK4 added to improve the locking rigidity of the swing out bracket and has a two (2) degree angle out for a bit more clearance from the build plate. A new pneumatic fitting bracket with a 45…
Walkie/Radio system for dye i4 with built-in PTT System is testede and Works very well, very good sound both as sender and receiver, Boom and wiring diagram is attached to this thread, plus some pictures of how it comes together BOM Pin…
The model is redrawled according to the movie Laputa: Castle in the Sky. All printed parts PLA and coloring Acryl MattFarbe.
I have seen others like this but nothing worked like I wanted. This will protect the PTT & Volume from unwanted activation & adjustments. Great if you need the radio to be in a pouch or pocket.
Ook geprint te koop via mijn Etsy store . Afdekplaat voor op overbodige dubbele PTT/KPN wanddoos. Met sleufjes ipv ronde gaatjes zodat je hem een beetje kunt stellen als de wanddoos niet helemaal recht in de muur zit. Print Settings…
This is a PTT button handle that I designed because I was wanting something other then commercial ones I was finding online. Below are is the button and cable I used. Materials: Red Button Cable Print Settings Printer Brand: Prusa…
This is the first file from scratch that I have made for 3d Printing. I made it in blender for a friend and decided share the model online. It should work he says, but he hasn't tried yet so any feedback would be great.
This is a rather trivial remix of the PTT dummy button from Stereogenic. I only made his latches slightly thicker and more flexible after I broke one of them on my first attempt to insert it. Print it with PETG and add supports to the…
Side buttons protection cage for Baofeng UV-5R radio Allows you to avoid inadvertent push (bag, pocket, ...) Cage de protection des boutons latéraux pour radio Baofeng UV-5R Permet d'éviter des appuis par inadvertance (sac, poche, …)
My kids have some Tintec HK-588 walkie talkies (cheap Chinese clones), but the little rubber PTT buttons keep falling out. We only have one left so I got the calipers out and made a replacement from TPU. I don't know if it would work in a…
Had an idea that this could be a fun entry for a contest. Time will tell. I modified the original model by adding some distance between the hands. Added a post and a platform for your favorite paper product… Printed on a MK3S with a 0.6…
I built it using spare electronic parts, so there's no point in trying to list them here. But keep in mind: The button itself and volume knob adjuster are regular components from adafruit Speaker is also from adafruit, I don't remember…
A simple 1.5mm thick end-cap which snaps into Phoenix Contact PTTP 2.5 DIN rail terminals and covers the contacts. Can also be used as a divider between banks of terminals. Might require a drop of superglue on the tabs depending on print…
Updated model for the Knob Guards: Posted a new model. https://www.printables.com/model/923894-tyt-md-uv390-md-390-knob-guards-revised Updated model for the PTT Guard: V1.15 Added to files in this model. I tinkered with the design to make…
A simple piece to block the flashlight, PTT, and monitor button on the side of the radio to prevent hot mic incidents.
A wing to relocate the PTT slightly off the side of a plate carrier, holes are modeled in to fit the u94 style PTTs both single and dual downlead. Works best with hook velcro on the backside to further help secure it to the loop field on…
French mailbox PTT T10 key. Print as it is, 0.2mm layers, with automtic tree supports. Be sure to remove all supports.
PLEASE NOTE: Keyboard switch power handling is in the ballpark of 12v AC/DC @ 10 mA. This may or may not. work with a given radio configuration. Use of a keyboard switch is AT YOUR OWN RISK in any given setting. I make no assurances of…
Push-To-Talk trigger, designed to be used with ~7mm momentary on button switches. The FreeCAD file is included so that you can remove my (old) callsign if you so desire.
The Printable TurnTable (or Pooch Turn Table for the most egotistical of us) is the 3D Printable open frame version of the RepBox TT drawer I released a while back. The entire thing is printable save for the following BOM 5pc 7mm diameter…
