21 modeli
Final version is out! Check it out here: This is a Beta version of the noonefpv 2.5" drone frame - I'm still working on finishing this design, but you can download it and try it out now completely for free! This frame uses triangular…
This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 10 inch rack. The mount is 1U high, and the switch mounts flush with the front. The total depth when mounted in the rack is no more than then depth of the…
After building the laser engraver by infectedfpv26, I found the Sculpfun S9 on Bangood was on offer, so I bit the bullet and purchased it. only thing then , of course the laser mount was incompatible with the S9 so I designed this.…
US Army PV2/E-2 Rank. Gcode file attached for the color change on the chevron.
This is the cartridge board support for the model 2 Sega Genesis that has been fitted with a triple bypass v2 install. This support has a space to run ribbon IDC wire safely under the main board to prevent damage. While maintaining…
This is a cup that was designed in OnShape CAD in about 5-10 minutes
I made this supports for 3 kinds of led. A 12 led cluster from HobbyKing, 12V, (ref 12LED-RE / 12LED-BL / 12LED-GR / 12LED-WH) to be positionned at the back or in the front. A 3 led with buzzer for Naze32, 5V, (Ref 090000013-0) to be…
@work we use this tape for repair archive paper, because there is only 2cm width or bigger to order i made this holder with a blade in it to cut it a middle in two or in three. I use a tree support, with 1 layer minus of the top for a…
Multiboard mount for a Zyxel GS1200-5HPv2 5 port managed POE switch. Parts for both the switch and the power supply. You will need to print two of each. Printing Guidelines: I printed using standard Multiboard settings. Use 3 perimeter…
I have experienced that the original feet look good but break pretty easy when light force from above is applied which can easily happen while working on the floor on the machine. So I have made some more sturdy feet which can no problem…
This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 19 inch rack.
Update as of December 29, 2021: corrected some mistakes, lowered focusholder and shifted buck converter up for more clearance to heatsink, sdapted measures for long laserholder to get better clearances added a little 3.5mm addon for the…
I wanted a straight down mount for my quadcopter Mobius camera. This one works well. Instructions I printed this with 95% infill in PLA with support generation turned on and the front part down on the bed. It came out nice and sturdy, but…
I saw J0bro's design, but it didn't fit my frame, so I designed a new one which fit my dimensions. I also didn't feel like ordering the vibration dampeners so I designed those as well and printed them in NinjaFlex which seems to have…
Pop Vinyl Display Wall Bracket – Version 2 (Prototype / Display Grade) This is Version 2 of a modular wall-mounted display bracket designed specifically for boxed Pop Vinyl figures. The goal of this design is to balance structural support…
A case for the Isee IGEPv2 processor board: https://labs.isee.biz/index.php/IGEPv2 Screw holes are 3mm in diameter. PLEASE NOTE THAT THERE IS NO HOLE FOR THE J200 5V INPUT. Only a hole for the RS485 DC input is included in the file. In…
RLPv2 - The RLP original case was too wide. This is designed with a 10mm magnet
RLPv2 - The RLP original case was too wide. This is designed with a 10mm magnet
Pop Vinyl Display Wall Bracket – Version 2 (Prototype / Display Grade) This is Version 2 of a modular wall-mounted display bracket designed specifically for boxed Pop Vinyl figures. The goal of this design is to balance structural support…
I remixed 60W Electronic load case by kn-dima to create this. So credit goes to him. https://www.thingiverse.com/thing:3893633 I made walls thicker as original ones were too delicate. I also changed back vents so they can be printed…
